检索结果-南通市图书馆

Petroleum Science 2024年第4期21卷 2469-2474页

作者： James J.Sheng er-Long Yang College of Petroleum Engineering Northeast Petroleum University

During air injection into an oil reservoir, an oxidation reaction generates some heat to raise the reservoir temperature. When the reservoir temperature reaches an ignition temperature, spontaneous ignition occurs. There is a time delay from the injection to ignition. There are mixed results regarding the feasibility of spontaneous ignition in real-field projects and in laboratory experiments. No analytical model is available in the literature to estimate the oxidation time required to reach spontaneous ignition with heat *** paper discusses the feasibility of spontaneous ignition from theoretical points and experimental and field project observations. An analytical model considering heat loss is proposed. Analytical models with and without heat loss investigate the factors that affect spontaneous ignition. Based on the discussion and investigations, we find that it is more difficult for spontaneous ignition to occur in laboratory experiments than in oil reservoirs; spontaneous ignition is strongly affected by the initial reservoir temperature, oil activity, and heat loss; spontaneous ignition is only possible when the initial reservoir temperature is high, the oil oxidation rate is high, and the heat loss is low.

关键词： Spontaneous ignition Time delay Air injection Heat loss Low temperature oxidation Combustion

Comparison of engineering failures and seismic responses of 500 kV transformer-bushing systems in the 2022 Luding earthquake

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Earthquake Engineering and Engineering Vibration 2024年第4期23卷 1029-1041页

作者： Zhu Wang Wu Ming’er Xie Qiang Department of Structural Engineering Tongji UniversityShanghai 200092China Key Laboratory of Performance Evolution and Control for Engineering Structures(Tongji University) Shanghai 200092China

Cemented and mechanically clamped types of end fittings(fitting-C and fitting-M)are commonly used in transformer *** the Luding Ms 6.8 earthquake that occurred in China on September 5,2022,all transformer bushings with the two types of end fittings in a 500 kV substation were ***-earthquake field investigations were conducted,and the failures of the two types of bushings were *** elementary simulation models of the transformer-bushing systems were developed to simulate the engineering failures,and further compute their seismic responses for *** results indicate that the hitch lugs of the connection flange are structurally harmful to seismic ***-M can decrease the bending stiffness of the bushing due to the flexible sealing rubber *** it provides a more flexible connection that dissipates energy,the peak accelerations and relative displacements at the top of the bushing are significantly lower than those of the bushing with *** with fitting-C,fitting-M transfers the high-stress areas from the connection flange to the root of the porcelain,so the latter becomes the most vulnerable ***-M increases the failure risk of the low-strength porcelain,indicating the unsuitability of applying it in high-intensity fortification regions.

关键词： transformer bushing end fitting Luding earthquake,engineering failure seismic responses

Health diagnosis of ultrahigh arch dam performance using heterogeneous spatial panel vector model

在线全文

学校读者我要写书评

暂无评论

Water Science and Engineering 2024年第2期17卷 177-186页

作者： er-feng Zhao Xin Li Chong-shi Gu The National Key Laboratory of Water Disaster Prevention Hohai UniversityNanjing 210098China NationalEngineering Research Centerof Water Resources Eficient Utilization and Engineering Safety Hohai UniversityNanjing 20098China

Currently,more than ten ultrahigh arch dams have been constructed or are being constructed in *** control is essential to long-term operation of these *** study employed the flexibility coefficient and plastic complementary energy norm to assess the structural safety of arch dams.A comprehensive analysis was conducted,focusing on differences among conventional methods in characterizing the structural behavior of the Xiaowan arch dam in ***,the spatiotemporal characteristics of the measured performance of the Xiaowan dam were explored,including periodicity,convergence,and time-effect *** findings revealed the governing mechanism of main ***,a heterogeneous spatial panel vector model was developed,considering both common factors and specific factors affecting the safety and performance of arch *** model aims to comprehensively illustrate spatial heterogeneity between the entire structure and local regions,introducing a specific effect quantity to characterize local deformation ***,the proposed model was applied to the Xiaowan arch dam,accurately quantifying the spatiotemporal heterogeneity of dam ***,the spatiotemporal distri-bution characteristics of environmental load effects on different parts of the dam were reasonably *** of the model prediction enhances its credibility,leading to the formulation of health diagnosis criteria for future long-term operation of the Xiaowan *** findings not only enhance the predictive ability and timely control of ultrahigh arch dams'performance but also provide a crucial basis for assessing the effectiveness of engineering treatment measures.

关键词： Ultrahigh arch dam Structural performance Deformation behavior Diagnosis criterion Panel data model

Nanomedicine targeting ferroptosis to overcome anticancer therapeutic resistance

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Science China(Life Sciences) 2024年第1期67卷 19-40页

作者： Jing Cai Xiaoding Xu Phei er Saw Guangdong Provincial Key Laboratory of Malignant Tumor Epigenetics and Gene Regulation Guangdong-Hong Kong Joint Laboratory for RNA MedicineMedical Research CenterSun Yat-sen Memorial HospitalSun Yat-sen UniversityGuangzhou 510120China Nanhai Translational Innovation Center of Precision Immunology Sun Yat-sen Memorial HospitalSun Yat-sen UniversityFoshan 528200China

A potential reason for the failure of tumor therapies is treatment *** to chemotherapy,radiotherapy,and immunotherapy continues to be a major obstacle in clinic,resulting in tumor recurrence and *** major mechanisms of therapy resistance are inhibitions of cell deaths,like apoptosis and necrosis,through drug inactivation and excretion,repair of DNA damage,tumor heterogeneity,or changes in tumor microenvironment,*** studies have shown that ferroptosis play a major role in therapies resistance by inducing phospholipid peroxidation and iron-dependent cell *** ferroptosis inducers in combination with clinical treatment techniques have been used to enhance the effect in tumor ***,versatile ferroptosis nanoinducers exhibit an extensive range of functions in reversing therapy resistance,including directly triggering ferroptosis and feedback ***,we provide a detailed description of the design,mechanism,and therapeutic application of ferroptosis-mediated synergistic tumor *** also discuss the prospect and challenge of nanomedicine in tumor therapy resistance by regulating ferroptosis and combination therapy.

关键词： ferroptosis cancer therapy therapy resistance nanoinducers

Prospects of the Multi-channel Photometric Survey Telescope in the Cosmological Application of Type Ia Supernovae

在线全文

学校读者我要写书评

暂无评论

Research in Astronomy and Astrophysics 2024年第4期24卷 183-191页

作者： Zhenyu Wang Jujia Zhang Xinzhong er Jinming Bai Yunnan Observatories Chinese Academy of SciencesKunming 650216China University of Chinese Academy of Sciences Beijing 100049China Key Laboratory for the Structure and Evolution of Celestial Objects Chinese Academy of SciencesKunming 650216China International Centre of Supernovae Yunnan Key LaboratoryKunming 650216China South-Western Institute for Astronomy Research Yunnan UniversityKunming 650500China

The Multi-channel Photometric Survey Telescope(Mephisto)is a real-time,three-color photometric system designed to capture the color evolution of stars and transients *** telescope system can be crucial in cosmological distance measurements of low-redshift(low-z,z■0.1)Type Ia supernovae(SNe Ia).To optimize the capabilities of this instrument,we perform a comprehensive simulation study before its official operation is scheduled to *** considering the impact of atmospheric extinction,weather conditions,and the lunar phase at the observing site involving the instrumental features,we simulate light curves of SNe Ia obtained by *** best strategy in the case of SN Ia cosmology is to take the image at an exposure time of 130 s with a cadence of 3 *** this condition,Mephisto can obtain hundreds of high-quality SNe Ia to achieve a distance measurement better than 4.5%.Given the on-time spectral classification and monitoring of the Lijiang 2.4 m Telescope at the same observatory,Mephisto,in the whole operation,can significantly enrich the well-calibrated sample of supernovae at low-z and improve the calibration accuracy of high-z SNe Ia.

关键词： (stars:)supernovae:general (cosmology:)cosmological parameters telescopes

A comparative study on characteristics of retracted publications across different open access levels

在线全文

学校读者我要写书评

暂无评论

Journal of Data and Information Science 2024年第2期9卷 22-40页

作者： er-Te Zheng Hui-Zhen Fu Department of Information Resources Management School of Public AffairsZhejiang UniversityHangzhou 310058China School of Information Resource Management Renmin University of ChinaBeijing 100872China

Purpose:Recently,global science has shown an increasing open trend,however,the characteristics of research integrity of open access(OA)publications have rarely been *** aim of this study is to compare the characteristics of retracted articles across different OA levels and discover whether OA level influences the characteristics of retracted ***/methodology/approach:The research conducted an analysis of 6,005 retracted publications between 2001 and 2020 from the Web of Science and Retraction Watch *** publications were categorized based on their OA levels,including Gold OA,Green OA,and *** study explored retraction rates,time lags and reasons within these ***:The findings of this research revealed distinct patterns in retraction rates among different OA *** with Gold OA demonstrated the highest retraction rate,followed by Green OA and non-OA.A comparison of retraction reasons between Gold OA and non-OA categories indicated similar proportions,while Green OA exhibited a higher proportion due to falsification and manipulation issues,along with a lower occurrence of plagiarism and authorship *** retraction time lag was shortest for Gold OA,followed by non-OA,and longest for Green *** prolonged retraction time for Green OA could be attributed to an atypical distribution of retraction reasons.A comparative study on characteristics of retracted publications across different open access levels Research limitations:There is no exploration of a wider range of OA levels,such as Hybrid OA and Bronze *** implications:The outcomes of this study suggest the need for increased attention to research integrity within the OA *** occurrences offalsification,manipulation,and ethical concerns within Green OA publications warrant attention from the scientific ***/value:This study contributes to the understanding of research integrity in the realm of OA publications,she

关键词： Open access Retracted publications Reasons for retraction Retraction time lag Bibliometrics

Self-assembly Induced by Complexation of Diblock Copolyelectrolytes and Oppositely Charged Homopolymers

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Polymer Science 2024年第9期42卷 1321-1332,I0006页

作者： Ling Zhao Zhi-Yuan Yin Jia-Di Jiang er-Qiang Chen Shuang Yang Beijing National Laboratory for Molecular Sciences Key Laboratory of Polymer Chemistry and Physics of Ministry of EducationCenter for Soft Mater Science and EngineeringCollege of Chemistry and Molecular EngineeringPeking UniversityBeijing100871China Beijing National Laboratory for Molecular Sciences College of Chemistry and Molecular EngineeringPeking UniversityBeijing100871China

We investigate the solution self-assembly of a mixture of positively charged homopolymers and AB diblock copolymers,in which the A blocks are negatively charged,and the B blocks are *** electrostatic complexation between oppositely charged polymers drives the formation of many ordered *** microstructures and phase diagrams are calculated using self-consistent field theory(SCFT)based on an ion-pair model with an equilibrium constant K to characterize the strength of binding between positively and negatively charged *** effects of the charge ratio,representing the ratio of charges from the homopolymer over all charges from polymers in the system,on the ordered structure are systematically studied,both for hydrophobic and hydrophilic A *** charge ratio plays an important role in determining the phase boundaries in the phase diagram of salt concentration versus polymer *** also provide information about the varying tendency of the domain spacing and core size of the spherical phase when the charge ratio is changed,and the results are in good agreement with *** studies provide a deep understanding of the self-assembled microstructures of oppositely charged diblock copolymer-homopolymer systems.

关键词： Self-assembly Polyelectrolyte complexation Self-consistent field theory Ion-pair

在线全文

学校读者我要写书评

暂无评论

World Journal of Emergency Medicine 2024年第4期15卷 256-262页

作者： Jie er Janice Soo Yuan Helen Zhang Gek Hsiang Lim Fatimah Lateef Department of Emergency Medicine Singapore General HospitalSingapore 168753Singapore Health Services Research Unit Singapore General HospitalSingapore168753Singapore

BACKGROUND:This study aimed to review bicycle-related injuries during the COVID-19 pandemic to assist with reinforcement or implementation of new policies for injury ***:This is a retrospective descriptive analysis of injuries sustained during cycling for patients 18 years old and above who presented to Singapore General Hospital from January to June *** records were reviewed and *** analyses were used to summarize patient characteristics,and differences in characteristics subgrouped by triage acuity and discharge status were ***:The study included 272 patients with a mean age of 43 years and a male predominance(71.7%).Most presented without referrals(88.2%)and were not conveyed by ambulances(70.6%).Based on acuity category,there were 24(8.8%)Priority 1(P1)patients with 7 trauma activations,174(64.0%)and 74(27.2%)P2 and P3 patients *** most common injuries were fractures(34.2%),followed by superficial abrasion/contusion(29.4%)and laceration/wound(19.1%).Thirteen(4.8%)patients experienced head injury and 85 patients(31.3%)were documented to be wearing a *** majority occurred on the roads as traffic accidents(32.7%).Forty-two patients(15.4%)were admitted with a mean length of stay of 4.1 d and 17(6.3%)undergone surgical *** of 214(78.7%)discharged patients,no re-attendances or mortality were *** the subgroup analysis,higher acuity patients were generally older,with higher proportions of head injuries leading to ***:Our study highlights significant morbidities in bicycle-related *** is also a high proportion of fractures in the young healthy male *** prevention is paramount and we propose emphasizing helmet use and road user safety.

关键词： Cycling Injuries Emergency department

Investigation of Microstructure, Microhardness and Thermal Properties of Ag-In Intermetallic Alloys Prepared by Vacuum Arc Meltings

在线全文

学校读者我要写书评

暂无评论

Journal of Wuhan University of Technology(Materials Science) 2024年第1期39卷 182-187页

作者： ÇELİK erçevik ATA ESENer Pınar ÖZTÜRK Esra AKSÖZ Sezen Nevşehir HacıBektaşVeli University Department of Physics50300NevşehirTurkey erciyes University Graduate School of Natural and Applied Sciences38039KayseriTurkey Kocaeli University Department of Physics41380KocaeliTurkey

Ag-In intermetallic alloys were produced by using vacuum arc furnace. Differential Scanning Calorimetry(DSC) and Energy Dispersive X-Ray Spectrometry(EDX) were used to determine the thermal properties and chemical composition of the phases respectively. Microhardness values of Ag-In intermetallics were calculated with Vickers hardness measurement method. According to the experimental results, Ag-34 wt%In intermetallic system generated the best results of energy saving and storage compared to other intermetallic systems. Also from the microhardness results, it was observed that intermetallic alloys were harder than pure silver and Ag-26 wt%In system had the highest microhardness value with 143.45 kg/mm^(2).

关键词： thermal properties microstructure characterization microhardness alloys material characterization

Spark Plasma Sintering of Boron Carbide Using Ti_(3)SiC_(2) as a Sintering Additive

在线全文

学校读者我要写书评

暂无评论

Journal of Wuhan University of Technology(Materials Science) 2024年第3期39卷 645-650页

作者： Hülya Biçer Mustafa Tuncer Hasan Göçmez Iurii Bogomol Valerii Kolesnichenko Andrey Ragulya Kutahya Dumlupinar University School of EngineeringDepartment of Metallurgical and Materials EngineeringKütahya 43100Tur-key Boron Based Advanced Ceramics Application and Research Center Kütahya Dumlupınar UniversityKütahya 43100Turkey Advanced Technologies Center(İLTEM) Kütahya Dumlupınar UniversityKütahya 43000Turkey Department of High-Temperature Ma-terials and Powder Metallurgy National Technical University of Ukraine“Igor Sikorsky Kyiv Polytechnic Institute”Kyiv 03056Ukraine Frantsevich Institute for Problems of Materials Science National Academy of Sciences of UkraineKyiv 03056Ukraine

Boron carbide has unique properties for wide application possibilities;however,poor sinterability limits its *** approach to overcome this limitation is the addition of secondary phases into boron *** carbide based composite ceramics are produced by the direct addition of secondary phases into the structure or via reactive sintering using a sintering *** present study investigated the effect of Ti_(3)SiC_(2) addition to boron carbide by reactive spark plasma sintering in the range of 1700-1900℃.Ti_(3)SiC_(2) phase decomposed at high temperatures and reacted with B4C to form secondary phases of TiB2 and *** results demonstrated that the increase of Ti_(3)SiC_(2) addition(up to 15 vol%)effectively promoted the densification of B4C and yielded higher ***,as the amount of Ti_(3)SiC_(2) increased further,the formation of microstructural inhomogeneity and agglomeration of secondary phases caused a decrease in hardness.

关键词： reactive sintering SPS boron carbide MAX phase