检索结果-南通市图书馆

Microstructure and Properties of Mo Microalloyed Cold Rolled DP1000 Steels

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2011年第5期18卷 52-58页

作者： HAN Qi-hang KANG Yong-lin ZHAO Xian-meng lu chao GAO lu-feng School of Materials Science and Engineering State Key Laboratory for Advanced Metals and MaterialsUniversity of Science and Technology BeijingBeijing 100083China

Two kinds of ultra-high strength cold rolled dual phase steels have been developed by designing C-Si-Mn-Cr and C-Si-Mn-Cr-Mo alloy systems. Tensile strength and elongation of both steels exceed 1100 MPa and 10%,respectively. The microstructures of both steels consist of massive martensite and ferrite. And the massive martensite of Mo-free steel disperses in the ferrite with volume fraction of 64%. However,the massive martensite of Mo-containing steel is connected or closed by small martensite islands each other,and martensite volume fraction is 69%. As to Mo-free steel,the yield strength,yield ratio,and work hardening exponent n are 548 MPa,0.49,and 0.26,respectively. As for Mo-containing one,the yield strength,yield ratio,and n value are 746 MPa,0.66,and 0.33,respectively. Besides,the ferrite of Mo-free steel is deformed at the initial stage of plastic deformation. However,for Mo-containing one,Mo solution strengthened ferrite and small overaged martensite islands are deformed preferentially at small strain,which causes the yield strength to reach approximately 200 MPa higher than that of Mo-free steel.

关键词： Mo dual phase steel microstructure property deformation mechanism

Understanding the local structure and thermophysical behavior of Mg-La liquid alloys via machine learning potential

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2025年第2期32卷 439-449页

作者： Jia Zhao Taixi feng Guimin lu National Engineering Research Center for Integrated Utilization of Salt Lake Resource East China University of Science and TechnologyShanghai 200237China Joint International Laboratory for Potassium and Lithium Strategic Resources East China University of Science and TechnologyShanghai 200237China

The local structure and thermophysical behavior of Mg-La liquid alloys were in-depth understood using deep potential molecular dynamic(DPMD) simulation driven via machine learning to promote the development of Mg-La alloys. The robustness of the trained deep potential(DP) model was thoroughly evaluated through several aspects, including root-mean-square errors(RMSEs), energy and force data, and structural information comparison results;the results indicate the carefully trained DP model is reliable. The component and temperature dependence of the local structure in the Mg-La liquid alloy was analyzed. The effect of Mg content in the system on the first coordination shell of the atomic pairs is the same as that of temperature. The pre-peak demonstrated in the structure factor indicates the presence of a medium-range ordered structure in the Mg-La liquid alloy, which is particularly pronounced in the 80at% Mg system and disappears at elevated temperatures. The density, self-diffusion coefficient, and shear viscosity for the Mg-La liquid alloy were predicted via DPMD simulation, the evolution patterns with Mg content and temperature were subsequently discussed, and a database was established accordingly. Finally, the mixing enthalpy and elemental activity of the Mg-La liquid alloy at 1200 K were reliably evaluated,which provides new guidance for related studies.

关键词： magnesium-lanthanum liquid alloys local structure macroscopic properties thermodynamic behavior deep potential mo-lecular dynamic simulation

在线全文

学校读者我要写书评

暂无评论

七自由度番茄收获机械手的轨迹规划与仿真

浙江大学学报（工学版） 2018年第7期52卷 1260-1266,1274页

作者：秦超梁喜凤路杰彭明金超杞中国计量大学机电工程学院浙江杭州310018

为了探究番茄果实串收获机械手的轨迹规划方法,以七自由度番茄收获机械手为研究对象,运用D-H法建立运动学模型,得到位置和速度的正、反解.采用多项式插值法、抛物线过渡的线性插值法、摆线运动法和B样条插值法,对关节约束条件下的机械手... 详细信息

为了探究番茄果实串收获机械手的轨迹规划方法,以七自由度番茄收获机械手为研究对象,运用D-H法建立运动学模型,得到位置和速度的正、反解.采用多项式插值法、抛物线过渡的线性插值法、摆线运动法和B样条插值法,对关节约束条件下的机械手,从复位点到采摘点的运动进行关节空间轨迹规划与仿真试验.分析关节运动的位移、速度和加速度,对不同规划方法的关节最大速度进行定量分析.利用五次多项式法和摆线运动法,研究末端执行器的位移和速度.结果表明,利用五次多项式插值法能够满足关节路径点的位移、速度和加速度边界条件,规划的关节运动轨迹连续平滑,关节最大速度较摆线运动法平均降低了6.25%,提高了机械安全性能,对应的末端执行器运动轨迹平滑,无跳变点.

关键词：收获机械手轨迹规划关节空间多项式插值摆线运动

Distribution and mapping of temperate savanna in the sandy lands of eastern China

在线全文

学校读者我要写书评

暂无评论

Science China Earth Sciences 2025年第1期68卷 128-141页

作者： Xiaoya LI feng WANG Tao DUAN Kaijie YANG Bin YANG Chunmei WANG Xin TIAN Qi lu Institute of Ecological Conservation and Restoration Institute of Desertification Studies Chinese Academy of Forestry Institute of Desertification Institute of Desertification Studies Chinese Academy of Forestry Institute of Great Green Wall Satellite Application Centre for Ecology and Environment MEE Institute of Microelectronics Chinese Academy of Sciences Aerospace Information Research Institute Chinese Academy of Sciences Institute of Forest Resource Information Techniques Chinese Academy of Forestry

Savannas are distributed globally across various *** perform a significant socioeconomic role in regulating net primary productivity and the terrestrial carbon *** to the high spatial heterogeneity induced by the mixed distribution of trees and grasses,current global land-cover classification maps often classify savannas as forests or grasslands Temperate savannas in China cover a vast area,yet their spatial patterns and extent remain poorly *** study developed a novel remote sensing temperate savannas mapping method by integrating very high-resolution （VHR） unmanned aerial vehicle （UAV） and GF-6 satellite imagery based on the vegetation structure characteristics of temperate savannas using the FAO definition of *** and validation datasets were collected from VHR UAV imagery covering the main temperate savannah types with a ground area of 1818 *** fractional woody vegetation cover （FWVC） and fractional herbaceous vegetation cover （FHVC） in temperate savannas were estimated by integrating Classification and Regression Tree and Random Forest *** current distribution of temperate savannas in the Horqin and Otindag Sandy Lands of Eastern China was mapped to a unit area of 0.5 *** root-mean-square error （RMSE） values for the FWVC and FHVC models were 10.69% and 11.67%,and the R2values were 0.66 and 0.63,*** assessment indicated that the new temperate savanna map had high identification accuracy,with a Kappa coefficient of 0.70,overall accuracy of 0.88,and average accuracy of *** savannas in the sandy lands of eastern China were primarily distributed in the northern Horqin Sandy Land the central and eastern regions of the Otindag Sandy Land,and the transition zone from the southern slopes of the Greater Khingan Mountains to the plains,covering a total area of 3.27×10～6 *** main savannah types were elm,oak/maple,and shrub *** savannas were widely distributed in the Otindag Sandy

关键词： Temperate savanna UAV imagery GF-6 Fractional woody vegetation cover Fractional herbaceous vegetation cover Machine learning

同方期刊数据库

Ru doping triggering reconstruction of cobalt phosphide for coupling glycerol electrooxidation with seawater electrolysis

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2025年第1期100卷 317-326页

作者： Binglu Deng Jie Shen Jinxing lu Chuqiang Huang Zhuoyuan Chen feng Peng Yunpeng Liu School of Materials Science and Hydrogen Energy Foshan University School of Chemistry and Chemical Engineering Guangzhou University Guangdong Key Laboratory for Hydrogen Energy Technologies

Seawater electrolysis is a promising approach for sustainable energy without relying on precious ***,the large-scale seawater electrolysis is hindered by low catalytic efficiency and severe anode corrosion caused by the harmful *** contrast to the oxygen evolution reaction （OER）and chlorin ion oxidation reaction （ClOR）,glycerol oxidation reaction （GOR） is more thermodynamically and kinetically favorable ***,a Ru doping cobalt phosphide （Ru-CoP2） is proposed as a robust bifunctional electrocatalyst for seawater electrolysis and GOR,for the concurrent productions of hydrogen and value-added *** in situ and ex situ characterization analyses demonstrated that Ru doping featured in the dynamic reconstruction process from Ru-CoP2to Ru-CoOOH,accounting for the superior GOR *** coupling GOR with hydrogen evolution was realized by employing Ru-CoP2as both anode and cathode,requiring only a low voltage of 1.43 V at 100 mA cm-2,which was 250 m V lower than that in alkaline *** work guides the design of bifunctional electrocatalysts for energy-efficient seawater electrolysis coupled with biomass resource upcycling.

关键词： Anodes

From waste to wealth:Coal tar residue derived carbon materials as low-cost anodes for potassium-ion batteries

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2025年第2期32卷 464-475页

作者： Zhonghua lu Jun Shen Xin Zhang Lingcong chao Liang Chen Ding Zhang Tao Wei Shoudong Xu College of Chemical Engineering and Technology Taiyuan University of TechnologyTaiyuan 030024China College of Chemistry Taiyuan University of TechnologyTaiyuan 030024China School of Chemical Engineering and Pharmacy Wuhan Institute of TechnologyWuhan 430205China School of Energy and Power Jiangsu University of Science and TechnologyZhenjiang 212003China

Carbon materials are widely recognized as highly promising electrode materials for various energy storage system *** tar residues(CTR),as a type of carbon-rich solid waste with high value-added utilization,are crucially important for the development of a more sustainable *** this study,we employed a straightforward direct carbonization method within the temperature range of 700-1000℃to convert the worthless solid waste CTR into economically valuable carbon materials as anodes for potassium-ion batteries(PIBs).The effect of carbonization temperature on the microstructure and the potassium ions storage properties of CTR-derived carbons(CTRCs)were systematically explored by structural and morphological characterization,alongside electrochemical performances *** on the co-regulation between the turbine layers,crystal structure,pore structure,functional groups,and electrical conductivity of CTR-derived carbon carbonized at 900℃(CTRC-900H),the electrode material with high reversible capacity of 265.6m Ah·g^(-1)at 50 m A·g^(-1),a desirable cycling stability with 93.8%capacity retention even after 100 cycles,and the remarkable rate performance for PIBs were ***,cyclic voltammetry(CV)at different scan rates and galvanostatic intermittent titration technique(GITT)have been employed to explore the potassium ions storage mechanism and electrochemical kinetics of *** indicate that the electrode behavior is predominantly governed by surface-induced capacitive processes,particularly under high current densities,with the potassium storage mechanism characterized by an“adsorption-weak intercalation”*** work highlights the potential of CTR-based carbon as a promising electrode material category suitable for high-performance PIBs electrodes,while also provides valuable insights into the new avenues for the high value-added utilization of CTR.

关键词： coal tar residue carbon materials anode potassium-ion batteries high value-added

Metal-organic frameworks with dinuclear metal centers for synergistically boosting CO2 photoreduction

在线全文

学校读者我要写书评

暂无评论

Science China Chemistry 2025年第1期68卷 201-208页

作者： Hui-feng Wang Wen-Jie Shi Yu-Xin Yang Bao-Xia Dong Tong-Bu lu Di-Chang Zhong School of Chemistry and Chemical Engineering Yangzhou University Institute for New Energy Materials and Low Carbon Technologies School of Materials Science and Engineering Tianjin University of Technology

Dinuclear metal synergistic catalysis （DMSC） has been proved powerful in boosting CO2reduction,while this has not been achieved in heterogeneous catalysts with long-range order *** this study,we,by introduction of metal catalytic centers into an indium-based metal-organic framework （MOF）,obtained a series of isostructural In-MOFs,including three MOFs with mononuclear metal catalytic center （M-In）,three MOFs with dinuclear homometallic catalytic centers （MM-In）,and three MOFs with dinuclear heterometallic catalytic centers (MM’-In,M/M’=Co（II）,Ni（II）,Zn（II）).It was found that all these MOFs can serve as catalysts for photochemical CO2reduction to *** with M-In,the catalytic activities of MM-In were obviously enhanced,and that of MM’-In was further significantly *** example,the CO yield of Co Zn-In reaches a record value of 12,700μmol g-1h-1,which is 4.0,8.1,9.4,and 18.6-fold higher than that of Co Co-In,Zn Zn-In,Co-In,and Zn-In,***,the catalytic activities of Co Ni-In and Ni Zn-In also show different fold increase than those of corresponding dinuclear homometallic and mononuclear metallic *** results of control experiments and theoretical calculation reveal that the higher catalytic activities of MM-In over M-In can be ascribed to the DMSC effect,and the higher catalytic activity of MM’-In over MM-In can be ascribed to the strengthened DMSC *** work reveals the relationship between DMSC effect and bimetal centers in CO2reduction,which provides new insights into the DMSC and paves a new way to design highly active catalysts for photochemical CO2reduction.

关键词： metal-organic frameworks dinuclear metal centers synergistic catalysis CO2 reduction photocatalysis

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

一种心脏影像四维动态实时绘制方法

东北大学学报（自然科学版） 2011年第1期32卷 18-21页

作者：冯朝路杨金柱赵大哲刘积仁东北大学医学影像计算教育部重点实验室辽宁沈阳110819 东北大学信息科学与工程学院辽宁沈阳110819

借助心电图门控技术,多层螺旋CT(MDCT)可以采集心脏的跳动信息,但传统的体绘制方法不能满足心脏动态实时重建需求.提出一种采用心电图门控MDCT采集心脏多时相数据,基于图形处理器纹理映射的心脏动态4D实时绘制方法.该方法将采集到的数据... 详细信息

借助心电图门控技术,多层螺旋CT(MDCT)可以采集心脏的跳动信息,但传统的体绘制方法不能满足心脏动态实时重建需求.提出一种采用心电图门控MDCT采集心脏多时相数据,基于图形处理器纹理映射的心脏动态4D实时绘制方法.该方法将采集到的数据、GPU计算获得的材质与光照属性和传输函数数据,分别映射到GPU纹理单元.片元程序实现体数据、光照和阻光度纹理查找,合成最终图像.根据数据采集时间间隔,定时切换体数据纹理,从而实现4D心脏绘制.实验证明,该算法能够实现心脏的动态实时绘制,成像质量好,满足临床需求.

关键词：多层螺旋CT 图形处理器纹理映射心电图实时绘制

Advances in the Development of Gradient Scaffolds Made of Nano‑Micromaterials for Musculoskeletal Tissue Regeneration

在线全文

学校读者我要写书评

暂无评论

Nano-Micro Letters 2025年第3期17卷 455-500页

作者： Lei Fang Xiaoqi Lin Ruian Xu lu Liu Yu Zhang feng Tian Jiao Jiao Li Jiajia Xue Beijing Laboratory of Biomedical Materials Beijing University of Chemical TechnologyBeijing 100029People’s Republic of China State Key Laboratory of Organic‑Inorganic Composites Beijing University of Chemical TechnologyBeijing 100029People’s Republic of China School of Biomedical Engineering Faculty of Engineering and ITUniversity of Technology SydneySydneyNSW 2007Australia

The intricate hierarchical structure of musculoskeletal tissues,including bone and interface tissues,necessitates the use of complex scaffold designs and material structures to serve as tissue-engineered *** has led to growing interest in the development of gradient bone scaffolds with hierarchical structures mimicking the extracellular matrix of native tissues to achieve improved therapeutic *** on the anatomical characteristics of bone and interfacial tissues,this review provides a summary of current strategies used to design and fabricate biomimetic gradient scaffolds for repairing musculoskeletal tissues,specifically focusing on methods used to construct compositional and structural gradients within the *** latest applications of gradient scaffolds for the regeneration of bone,osteochondral,and tendon-to-bone interfaces are ***,the current progress of testing gradient scaffolds in physiologically relevant animal models of skeletal repair is discussed,as well as the challenges and prospects of moving these scaffolds into clinical application for treating musculoskeletal injuries.

关键词： Gradient scaffolds Musculoskeletal tissues Advanced manufacturing Biomaterials Tissue regeneration