检索结果-南通市图书馆

Effect of Al_(2)O_(3)on the Mechanical Properties of(B_(4)c+Al_(2)O_(3))/Al Neutron Absorbing Materials

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Acta Metallurgica Sinica(English Letters) 2024年第8期37卷 1411-1420页

作者： J.X.cai B.M.Shi N.Li Y.Liu z.G.zhang Y.N.zan Q.z.Wang B.L.xiao z.Y.Ma Shi‑changxu Innovation center for Advanced Materials Institute of Metal ResearchChinese Academy of SciencesShenyang 110016China Key Laboratory of Nuclear Materials and Safety Assessment Institute of Metal ResearchChinese Academy of SciencesShenyang 110016China Nuclear Equipment Division Beijing Institute of Nuclear EngineeringChina Nuclear Power Engineering Co.Ltd.Beijing 100840China Department of Materials Science School of Mechanical EngineeringShenyang UniversityShenyang 110044China

B_(4)c/Al composites are widely utilized as neutron absorbing materials for the storage and transportation of spent nuclear *** order to improve the high-temperature mechanical properties of B_(4)c/Al composites,in-situ nano-Al_(2)O_(3)was introduced utilizing oxide on Al powder *** this study,the Al_(2)O_(3)content was adjusted by utilizing spheroid Al powder with varying diameters,thereby investigating the impact of Al_(2)O_(3)content on the tensile properties of(B_(4)c+Al_(2)O_(3))/Al *** was found that the pinning effect of Al_(2)O_(3)on the grain boundaries could hinder the recovery of dislocations and lead to dislocation accumulation at high *** the result,with the increase in Al_(2)O_(3)content and the decrease in grain size,the high-temperature strength of the composites increased *** finest Al powder used in this investigation had a diameter of 1.4μm,whereas the resultant composite exhibited a maximum strength of 251 MPa at room temperature and 133 MPa at 350℃,surpassing that of traditional B_(4)c/Al composites.

关键词： Al matrix composites Neutron absorbing materials (B_(4)c+Al_(2)O_(3))/Al composites High-temperature strength

In situ digital testing method for quality assessment of soft soil improvement with polyurethane

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Rock Mechanics and Geotechnical Engineering 2024年第5期16卷 1732-1748页

作者： X.F.Wang c.J.Wang W.V.Yue z.J.zhang z.Q.Yue Department of civil Engineering China University of Geosciences (Beijing)BeijingChina Department of Water Science and Engineering Zhengzhou UniversityZhengzhouChina Department of Geotechnical Engineering Tongji UniversityShanghaiChina Department of civil Engineering The University of Hong KongChina

This study purposes an in situ testing method on quality assessment of soil *** drilling data includes the spatial distribution and in situ strength of untreated and treated soil along three different drillholes measured by on-site drilling monitoring *** factual drilling data can characterize the degree of soil improvement by penetration injection with permeable *** from on-site drilling monitoring shows that the linear zones represent constant drilling speeds shown in the plot of drill bit advancement *** drilling time,which indicates the spatial distributions of soil *** soil profile at the study site is composed of four layers,which includes fill,untreated silty clay,treated silty clay,and mucky *** results of soil profile are verified by the parallel site *** constant drilling speeds profile the coring-resistant strength of drilled *** comparing with the untreated silty clay,the constant drilling speeds of the treated silty clay have been decreased by 13.0-62.8%.Two drilling-speed-based indices of 61.2%and 65.6%are proposed to assess the decreased average drilling speed and the increased in situ strength of treated silty *** tests,*** compressive strength(UcS)test,have been performed with core sample to investigate and characterize in situ strength by comparing that with drilling *** show that the average predicted strengths of treated silty clay are 2.4-6.9 times higher than the average measured strength of untreated silty *** UcS-based indices of 374.5%and 344.2%verified the quality assessment(QA)results by this new in situ *** method provides a cost-effective tool for quality assessment of soil improvement by utilizing the digital drilling data.

关键词： Drilling process monitoring system Hydraulic rotary drilling process constant drilling speed Soil improvement Quality assessment

Bioinspired nanomaterials for wearable sensing and human–machine interfacing

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano Research 2024年第2期17卷 445-461页

作者： Vishesh Kashyap Junyi Yin xiao xiao Jun chen Department of Bioengineering University of CaliforniaLos AngelesLos AngelesCA 90095USA Department of Mechanical and Aerospace Engineering University of CaliforniaLos AngelesLos AngelesCA 90095USA

The inculcation of bioinspiration in sensing and human–machine interface(HMI)technologies can lead to distinctive characteristics such as conformability,low power consumption,high sensitivity,and unique properties like self-healing,self-cleaning,and *** sensing and HMI are fields rife with opportunities for the application of bioinspired nanomaterials,particularly when it comes to wearable sensory systems where biocompatibility is an additional *** review discusses recent development in bioinspired nanomaterials for wearable sensing and HMIs,with a specific focus on state-of-the-art bioinspired capacitive sensors,piezoresistive sensors,piezoelectric sensors,triboelectric sensors,magnetoelastic sensors,and electrochemical *** also present a comprehensive overview of the challenges that have hindered the scientific advancement in academia and commercialization in the industry.

关键词： bioinspired nanomaterials human–machine interface wearable sensors wearable bioelectronics

carbon coated LaFe_(0.92)Pd_(0.08)O_(3) composites for catalytic transfer hydrogenation:Balance in the ability of substrates adsorption and conversion

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano Research 2024年第5期17卷 3724-3732页

作者： Bowen Wang Nan zhang Ping xiao Jian zhang Sónia A.c.carabineiro Junjiang zhu Hubei Key Laboratory of Biomass Fibers and Eco-dyeing&Finishing College of Chemistry and Chemical EngineeringWuhan Textile UniversityWuhan 430200China college of chemistry and Materials Engineering Wenzhou UniversityWenzhou 325035China LAQV-REQUIMTE Department of ChemistryNOVA School of Science and TechnologyUniversidade NOVA de LisboaLargo da Torre2829-516 CaparicaPortugal

catalytic transfer hydrogenation(cTH)is a green and efficient pathway for selective hydrogenation of unsaturated aldehydes and ***,managing the abilities of solid catalysts to adsorb substrates and to convert them into desired products is a challenging ***,we report the synthesis of carbon coated LaFe_(0.92)Pd_(0.08)O_(3) composites(LFPO-8@c)for cTH of benzaldehyde(BzH)into benzyl alcohol(BzOH),using isopropanol(IPA)as hydrogen *** coating with carbon improves the ability to adsorb/transfer reactants from solution to active sites,and the doping of Pd2+at Fe3+site strengthens the ability of LaFeO_(3) to convert BzH into BzOH.A balanced point between them(i.e.,abilities to adsorb BzH and to convert BzH into BzOH)is obtained at LFPO-8@c,which exhibits a BzOH formation rate of 3.88 mmol·gcat^(-1)·h^(-1) at 180℃ for 3 h,which is 1.50 and 2.72 times faster than those of LFPO-8 and LaFeO_(3)@c.A reaction mechanism is proposed,in which the acidic sites(e.g.,Fe^(4+),oxygen vacancy)are used for the activation of c=O bond of BzH and O-H bond of IPA,and the basic sites(e.g.,lattice oxygen)for the activation ofα-H(O-H)bond of IPA.

关键词： LaFe_(0.92)Pd_(0.08)O_(3) porous carbon catalytic transfer hydrogenation isopropanol reaction mechanism

Finite barrier bound state

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Light(Science & Applications) 2024年第4期13卷 664-671页

作者： Tao Liu Kai Bai Yicheng zhang Duanduan Wan Yun Lai c.T.chan Meng xiao Key Laboratory of Artificial Micro-and Nano-structures of Ministry of Education and School of Physics and Technology Wuhan University430072 WuhanChina. National Laboratory of Solid State Microstructures School of Physicsand Collaborative Innovation Center of Advanced MicrostructuresNanjing University210093 NanjingChina. Department of Physics The Hong Kong University of Science and TechnologyClear Water BayKowloon999077Hong KongChina. Wuhan Institute of Quantum Technology 430206 WuhanChina

A boundary mode localized on one side of a finite-size lattice can tunnel to the opposite side which results in unwanted *** wisdom tells that the tunneling probability decays exponentially with the size of the system which thus requires many lattice sites before eventually becoming negligibly *** we show that the tunneling probability for some boundary modes can apparently vanish at specific ***,similar to bound states in the continuum,a boundary mode can be completely trapped within very few lattice sites where the bulk bandgap is not even *** intriguingly,the number of trapped states equals the number of lattice sites along the normal direction of the *** provide two configurations and validate the existence of this peculiar finite barrier-bound state experimentally in a dielectric photonic crystal at microwave *** work offers extreme flexibility in tuning the coupling between localized states and channels as well as a new mechanism that facilitates unprecedented manipulation of light.

关键词： boundary state eventually

Remodeling Tumor Immune Microenvironment by Using Polymer-Lipid-Manganese Dioxide Nanoparticles with Radiation Therapy to Boost Immune Response of castration-Resistant Prostate cancer

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Research 2024年第3期2023卷 83-96页

作者： Abdulmottaleb E.zetrini HoYin Lip Azhar z.Abbasi Ibrahim Alradwan Taksim Ahmed chunsheng He Jeffrey T.Henderson Andrew M.Rauth xiao Yu Wu Advanced Pharmaceutics and Drug Delivery Laboratory Leslie Dan Faculty of PharmacyUniversity of TorontoM5S 3M2TorontoONCanada. Departments of Medical Biophysics and Radiation Oncology University of TorontoM5G 1L7TorontoONCanada.

Despite substantial progress in the treatment of castration-resistant prostate cancer (cRPc), including radiation therapy and immunotherapy alone or in combination, the response to treatment remains poor due to the hypoxic and immunosuppressive nature of the tumor microenvironment. Herein, we exploited the bioreactivity of novel polymer–lipid manganese dioxide nanoparticles (PLMDs) to remodel the tumor immune microenvironment (TIME) by increasing the local oxygen levels and extracellular pH and enhancing radiation-induced immunogenic cell death. This study demonstrated that PLMD treatment sensitized hypoxic human and murine cRPc cells to radiation, significantly increasing radiation-induced DNA double-strand breaks and ultimately cell death, which enhanced the secretion of damage-associated molecular patterns, attributable to the induction of autophagy and endoplasmic reticulum stress. Reoxygenation via PLMDs also polarized hypoxic murine RAW264.7 macrophages toward the M1 phenotype, enhancing tumor necrosis factor alpha release, and thus reducing the viability of murine cRPc TRAMP-c2 cells. In a syngeneic TRAMP-c2 tumor model, intravenous injection of PLMDs suppressed, while radiation alone enhanced recruitment of regulatory T cells and myeloid-derived suppressor cells. Pretreatment with PLMDs followed by radiation down-regulated programmed death-ligand 1 and promoted the infiltration of antitumor cD8+ T cells and M1 macrophages to tumor sites. Taken together, TIME modulation by PLMDs plus radiation profoundly delayed tumor growth and prolonged median survival compared with radiation alone. These results suggest that PLMDs plus radiation is a promising treatment modality for improving therapeutic efficacy in radioresistant and immunosuppressive solid tumors.

关键词： RAW264.7 alone treatment

Distinct Electrical and Mechanical Responses of a cu-10Fe composite Prepared by Hot-Pressed Sintering and Post Treatment

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Acta Metallurgica Sinica(English Letters) 2024年第2期37卷 255-265页

作者： X.Y.Yue S.Y.Peng X.zhang c.N.He Y.z.Tian Key Laboratory for Anisotropy and Texture of Materials(Ministry of Education) School of Materials Science and EngineeringNortheastern UniversityShenyang110819China School of Materials Science and Engineering and Tianjin Key Laboratory of composite and Functional Materials Tianjin UniversityTianjin300350China Research centre for Metallic Wires Northeastern UniversityShenyang110819China

A cu-10wt%Fe composite was prepared through hot-pressed sintering,and the material was subsequently solution *** hot-pressed sintered and solution treated materials were rolled and *** precipitation behavior and performance changes were systematically studied by using scanning electron microscopy and transmission electron *** contrast to the hot-pressed sintered specimen,the solution treatment significantly affects the thermal stability and properties of the cu-10wt%Fe *** cu-10wt%Fe composite was prepared after solid solution,cold rolling and aging at 773 K for 1 h,and it obtained excellent tensile strength of 494 MPa,uniform elongation of 16.3%,electrical conductivity of 51.1%IAcS and softening temperature of 838 *** for the distinct difference in thermal stability and properties between hot-pressed sintered and solution treated specimens were *** findings provide a theoretical basis for designing high-performance cu-based in-situ composites by post treatment.

关键词： cu-Fe composite Hot-pressed sintering Thermal stability Strength Electrical conductivity

Study on the properties of solar cell under bias condition by using impedance spectroscopy

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Optoelectronics Letters 2024年第9期20卷 518-522页

作者： xiao Wenbo LI Ao xiao Bangzhi Key Laboratory of Nondestructive Test Ministry of EducationNanchang Hangkong UniversityNanchang 330063China Science and Technology college Nanchang Hangkong UniversityGongqingcheng 332020China School of Engineering and construction Nanchang UniversityNanchang 330031China

This paper investigates the properties of silicon cells(SI)and perovskite solar cells(PSc)under bias condition by using impedance *** parallel resistances R_(p) of SI and PSc are found to decrease with increasing bias,but the capacitance c_(p) shows the opposite *** Rp with c_(p),bias has a greater impact on the c_(p) of both cells.

关键词： spectroscopy impedance condition

computational Experiments for complex Social Systems:Integrated Design of Experiment System

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

IEEE/cAA Journal of Automatica Sinica 2024年第5期11卷 1175-1189页

作者： xiao Xue Xiangning Yu Deyu zhou xiao Wang chongke Bi Shufang Wang Fei-Yue Wang college of Intelligence and computing Tianjin UniversityTianjin 300350China School of Software Shandong UniversityJinan 250101China School of Artificial Intelligence Anhui UniversityHefei 230601China School of Geographic and Environmental Sciences Tianjin Normal UniversityTianjin 300387China Institute of Automation chinese Academy of Sciences Beijing 100190China

Powered by advanced information industry and intelligent technology,more and more complex systems are exhibiting characteristics of the cyber-physical-social systems(cPSS).And human factors have become crucial in the operations of complex social *** mechanical analysis and social simulations alone are powerless for analyzing complex social *** this backdrop,computational experiments have emerged as a new method for quantitative analysis of complex social systems by combining social simulation(e.g.,ABM),complexity science,and domain ***,in the process of applying computational experiments,the construction of experiment system not only considers a large number of artificial society models,but also involves a large amount of data and *** a result,how to integrate various data,model and knowledge to achieve a running experiment system has become a key *** paper proposes an integrated design framework of computational experiment system,which is composed of four parts:generation of digital subject,generation of digital object,design of operation engine,and construction of experiment ***,this paper outlines a typical case study of coal mine emergency management to verify the validity of the proposed framework.

关键词： artificial system operations