检索结果-南通市图书馆

Development of AZ91/SiC surface composite by FSP:effect of vibration and process parameters on microstructure and mechanical characteristics

引用

Advances in Manufacturing 2020年第1期8卷 82-96页

作者： behrouz bagheri Mahmoud Abbasi Department of Mining and Metallurgy Amirkabir University of TechnologyTehranIran Faculty of Engineering University of Kashan.KashanIran

A surface composite layer enhances the mechanical characteristics of a surface while retaining the properties of the base *** stir processing(FSP)is a method for forming surface metal matrix composites(SMMCs)that reinforce a surface with *** the current study,a new method entitled friction stir vibration processing(FSVP)was applied to form SMMCs on the surface of AZ91 magnesium alloy with SiC particles as the reinforcing *** to FSP,in FSVP,the workpiece was vibrated normal to the processing line while the tool rotated and *** microstructure and mechanical properties of friction stir(FS)and friction stir vibration(FSV)processed specimens were ***,the effects of vibration frequency and process parameters on different characteristics of FS and FSV processed specimens were *** results showed that the stir zone grains for FSV processed specimens were finer than those for FS processed specimens,and the second phase particles(SiC particles)had a more homogenous distribution in the former specimens than in the latter *** was related to the effect of workpiece vibration during FSVP,which increased the material deformation and led to enhanced dynamic recrystallization and the breakdown of agglomerated SiC *** results indicated that the stir zone grain size decreased,and the distribution homogeneity of the SiC particles increased as vibration frequency *** was also observed that the stir zone grain size increased,and the mechanical properties of the processed specimens decreased as tool rotation speed increased.

关键词： Friction stir processing(FSP) Vibration AZ91 magnesium alloy Dynamic recrystallization Microstructure Mechanical properties

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Microstructure and mechanical characteristics of AA6061-T6 joints produced by friction stir welding,friction stir vibration welding and tungsten inert gas welding:A comparative study

引用

International Journal of Minerals,Metallurgy and Materials 2021年第3期28卷 450-461页

作者： behrouz bagheri Mahmoud Abbasi Amin Abdollahzadeh Department of Mining and Metallurgy Amirkabir University of TechnologyTehranIran Faculty of Engineering University of KashanRavandi Blvd.KashanIran Department of Materials Science and Engineering Faculty of EngineeringShahid Chamran University of AhvazAhvazIran

This study compared the microstructure and mechanical characteristics of AA6061-T6 joints produced using friction stir welding(FSW),friction stir vibration welding(FSVW),and tungsten inert gas welding(TIG).FSVW is a modified version of FSW wherein the joining specimens are vibrated normal to the welding line during *** results indicated that the weld region grains for FSVW and FSW were equiaxed and were smaller than the grains for *** addition,the weld region grains for FSVW were finer compared with those for *** also showed that the strength,hardness,and toughness values of the joints produced by FSVW were higher than those of the other joints produced by FSW and *** vibration during FSW enhanced dynamic recrystallization,which led to the development of finer *** weld efficiency of FSVW was approximately 81%,whereas those of FSW and TIG were approximately 74%and 67%,respectively.

关键词： friction stir welding vibration tungsten inert gas welding mechanical characteristics microstructure

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

A comparative study between friction stir processing and friction stir vibration processing to develop magnesium surface nanocomposites

引用

International Journal of Minerals,Metallurgy and Materials 2020年第8期27卷 1133-1146页

作者： behrouz bagheri Mahmoud Abbasi Amin Abdollahzadeh Amir Hossein Kokabi Department of Mining and Metallurgy Amirkabir University of TechnologyTehranIran Faculty of Engineering University of KashanRavandi Blvd.KashanIran Department of Materials Science and Engineering Sharif University of TechnologyTehranIran Institute of Materials Engineering and Advanced Processes Department of Mining and MetallurgyAmirkabir University of TechnologyTehranIran

Friction stir processing(FSP)can be used to improve surface *** this study,a modified method of FSP called friction stir vibration processing(FSVP)was applied to develop a surface composite on AZ91 magnesium *** this technique,the workpiece is vibrated normal to the processing *** results illustrated that compared with the FSP method,the FSVP caused a better homogeneous distribution of SiC particles in the *** results also showed that matrix grains of friction stir vibration processed(FSV-processed)samples((26.43±2.00)μm)were finer than those of friction stir processed(FS-processed)specimens((39.43±2.00)μm).The results indicated that the ultimate tensile strength(UTS)of FSV-processed specimens(361.82 MPa)was higher than that of FS-processed specimens(324.97 MPa).The higher plastic strain in the material during FSVP,due to workpiece vibration,resulted in higher dynamic recrystallization,and consequently,finer grains were *** elongation and formability index of the FSV-processed specimen(16.88%and 6107.52 MPa·%,respectively)were higher than those of the FS-processed sample(15.24%and 4952.54 MPa·%,respectively).Moreover,the effects of FSVP were also found to intensify as the vibration frequency increased.

关键词： friction stir processing friction stir vibration processing surface composite mechanical properties microstructure

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Simulation and experimental study of dynamic recrystallization process during friction stir vibration welding of magnesium alloys

引用

Transactions of Nonferrous Metals Society of China 2021年第9期31卷 2626-2650页

作者： Mahmoud ABBASI behrouz bagheri Farzaneh SHARIFI Faculty of Engineering University of KashanKashanIran Department of Mining and Metallurgy Amirkabir University of TechnologyTehranIran School of Mechanical and Materials Engineering Washington State UniversityPullmanUSA

A two-dimensional cellular automaton(CA)model was utilized to analyze the effect of mechanical vibration on microstructure evolution of AZ91 alloy during friction stir welding(FSW).The simulated results,namely grain topology,grain size distribution,average grain size,and also the dynamic recrystallization(DRX)fraction were compared with measured *** adequate comparability between FEM and experimental data shows that the CA method can be applied to the analysis of the microstructure progression during the friction stir welding of AZ91 *** is concluded that the dislocation density during the friction stir vibration welding(FSVW)is higher than that in the FSW process and the process of nucleation and grain growth is faster for samples during FSVW compared to *** grain size modification and DRX phenomenon with various vibration frequencies were also simulated in detail during *** is found that vibration makes nucleation start earlier and decreases the proportion of the incubation period and the percentage of recrystallization as vibration frequency improves.

关键词： friction stir welding vibration simulation grain size dynamic recrystallization cellular automaton model

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Effect of second-phase particle size and presence of vibration on AZ91/SiC surface composite layer produced by FSP

引用

Transactions of Nonferrous Metals Society of China 2020年第4期30卷 905-916页

作者： behrouz bagheri Mahmoud ABBASI Amin ABDOLLAHZADEH Seyyed Ehsan MIRSALEHI Department of Mining and Metallurgy Amirkabir University of TechnologyTehranIran Faculty of Engineering University of KashanKashanIran Department of Materials Science and Engineering Sharif University of TechnologyTehranIran Institute of Materials Engineering and Advanced Processes Department of Mining and MetallurgyAmirkabir University of TechnologyTehranIran

An improved method of friction stir processing(FSP)was introduced for the processing of AZ91 magnesium alloy *** novel process was called“friction stir vibration processing(FSVP)”.FSP and FSVP were utilized to develop surface composites on the studied alloy while SiC nanoparticles were applied as second-phase *** effect of reinforcing SiC particles with different sizes(30 and 300 nm)on different characteristics of the composite surface was *** results indicated that the microstructure was refined and mechanical properties such as hardness,ductility,and strength were enhanced as FSVP was ***,it was concluded that the effect of reinforcing particles with a size of 30 nm on the microstructure and mechanical properties of the surface composite was more obvious than that of particles with a size of 300 *** was also found that mechanical properties and microstructure of FSV-processed specimens were improved as vibration frequency *** hardness value in the stir zone was about 157 MPa for the FSV-processed specimen at a vibration frequency of 50 Hz,while this value was around 116 MPa for the FSV-processed specimen at a vibration frequency of 25 Hz.

关键词： friction stir processing vibration SiC nano-particles particle size mechanical properties microstructure residual stress

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：