检索结果-南通市图书馆

A modified smoothed particle hydrodynamics method considering residual stress for simulating failure and its application in layered rock mass

引用

Journal of Mountain Science 2024年第6期21卷 2091-2112页

作者： xia Chengzhi SHI Zhenming KOU Huanjia Department of Geotechnical Engineering College of Civil EngineeringTongji UniversityShanghai 200092China Key Laboratory of Geotechnical and Underground Engineering of Ministry of Education Tongji UniversityShanghai 200092China

Residual strength is an indispensable factor in evaluating rock fracture,yet the current Smoothed Particle Hydrodynamics(SPH)framework rarely considers its influence when simulating *** improved cracking strategy considering residual stress in the base bond SPH method was proposed to simulate failures in layered rocks and slopes and verified by experimental results and other simulation methods(i.e.,the discrete element method).Modified Mohr–Coulomb failure criterion was applied to distinguish the mixed failure of tensile and *** fracture markψwas introduced to improve the kernel function after tensile damage,and the calculation of residual stress after the damage was derived after shear *** simulations were carried out to evaluate its performance under different stress and scale conditions and to verify its effectiveness in realistically reproducing crack initiation and propagation and coalescence,even fracture and *** results indicate that the improved cracking strategy precisely captures the fracture and failure pattern in layered rocks and rock *** residual stress of brittle tock is correctly captured by the improved SPH *** improved SPH method that considers residual strength shows an approximately 13%improvement in accuracy for the safety factor of anti-dip layered slopes compared to the method that does not consider residual strength,as validated against analytical *** infer that the improved SPH method is effective and shows promise for applications to continuous and discontinuous rock masses.

关键词： Smoothed particle hydrodynamics Cracking strategy Residual stress Layered rock Crack propagation

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

A Probing Model of Secret Key Generation Based on Channel Autocorrelation Function

引用

China Communications 2024年第6期21卷 163-175页

作者： xia Enjun Hu Binjie Shen Qiaoqiao School of Electronic and Information Engineering South China University of TechnologyGuangzhou 510641China

Secret key generation(SKG)is a promising solution to the problem of wireless communications *** the first step of SKG,channel probing affects it *** there have been some probing schemes,there is a lack of research on the optimization of the probing *** study investigates how to optimize correlated parameters to maximize the SKG rate(SKGR)in the time-division duplex(TDD)***,we build a probing model which includes the effects of transmitting power,the probing period,and the dimension of sample *** on the model,the analytical expression of the SKGR is ***,we formulate an optimization problem for maximizing the SKGR and give an algorithm to solve *** conclude the SKGR monotonically increases as the transmitting power *** mathematical proofs are given in this *** the simulation results,increasing appropriately the probing period and the dimension of the sample vector could increase the SKGR dramatically compared to a yardstick,which indicates the importance of optimizing the parameters related to the channel probing phase.

关键词： channel autocorrelation function channel probing optimization problem physical layer security secret key generation

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Recent advances in transition-metal catalyzed nitrene transfer reactions with carbamates

引用

Chinese Chemical Letters 2024年第3期35卷 76-86页

作者： Yanshu Luo Xinyu Zhang Yuanzhi xia College of Chemistry and Materials Engineering Wenzhou UniversityWenzhou 325035China

Nitrene transfer reactions are powerful tools in synthetic organic *** recent years,transitionmetal catalyzed nitrene transfer reactions with carbamates as the nitrene precursors have been widely *** species undergoes facile C-H amination,aziridination,and bifunctionalization of alkenes under the catalysis of different transition metals including Rh,Fe,Ru and others,enabling the efficient construction of various nitrogen-containing *** this review,the recent developments in nitrene transfer reactions with carbamates via N-O bond cleavage were introduced based on different types of reaction,and the key mechanistic information and synthetic applications of the methodologies were discussed.

关键词： Transition-metal catalysis Nitrene transfer Carbamate C—H amination Aziridination Bifunctionalization

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Prediction and scheduling of multi-energy microgrid based on BiGRU self-attention mechanism and LQPSO

引用

Global Energy Interconnection 2024年第3期7卷 347-361页

作者： Yuchen Duan Peng Li Jing xia School of Automation and Intelligence Beijing Jiaotong UniversityBeijing 100044P.R.China Goldwind Science&Technology Co.Ltd. Beijing 100176P.R.China

To predict renewable energy sources such as solar power in microgrids more accurately,a hybrid power prediction method is presented in this ***,the self-attention mechanism is introduced based on a bidirectional gated recurrent neural network(BiGRU)to explore the time-series characteristics of solar power output and consider the influence of different time nodes on the prediction ***,an improved quantum particle swarm optimization(QPSO)algorithm is proposed to optimize the hyperparameters of the combined prediction *** final proposed LQPSO-BiGRU-self-attention hybrid model can predict solar power more *** addition,considering the coordinated utilization of various energy sources such as electricity,hydrogen,and renewable energy,a multi-objective optimization model that considers both economic and environmental costs was constructed.A two-stage adaptive multi-objective quantum particle swarm optimization algorithm aided by a Lévy flight,named MO-LQPSO,was proposed for the comprehensive optimal scheduling of a multi-energy microgrid *** algorithm effectively balances the global and local search capabilities and enhances the solution of complex nonlinear *** effectiveness and superiority of the proposed scheme are verified through comparative simulations.

关键词： Microgrid Bidirectional gated recurrent unit Self-attention Lévy-quantum particle swarm optimization Multi-objective optimization

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Buckling optimization of curvilinear fiber-reinforced composite structures using a parametric level set method

引用

Frontiers of Mechanical Engineering 2024年第1期19卷 149-160页

作者： Ye TIAN Tielin SHI Qi xia State Key Laboratory of Intelligent Manufacturing Equipment and Technology Huazhong University of Science and TechnologyWuhan 430074China

Owing to their excellent performance and large design space,curvilinear fiber-reinforced composite structures have gained considerable attention in engineering fields such as aerospace and *** addition to the stiffness and strength of such structures,their stability also needs to be taken into account in the *** study proposes a level-set-based optimization framework for maximizing the buckling load of curvilinear fiber-reinforced composite *** the proposed method,the contours of the level set function are used to represent fiber *** a composite laminate with a certain number of layers,one level set function is defined by radial basis functions and expansion coefficients for each ***,the fiber angle at an arbitrary point is the tangent orientation of the contour through this *** the finite element of buckling,the stiffness and geometry matrices of an element are related to the fiber angle at the element *** study considers the parallelism constraint for fiber *** the sensitivity calculation of the objective and constraint functions,the method of moving asymptotes is utilized to iteratively update all the expansion coefficients regarded as design *** numerical examples under different boundary conditions are given to validate the proposed *** show that the optimized curved fiber paths tend to be parallel and equidistant regardless of whether the composite laminates contain holes or ***,the buckling resistance of the final design is significantly improved.

关键词： buckling optimization curvilinear fiber composite structure level set method manufacturing constraint

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Three dimensional discrete element modelling of the conventional compression behavior of gas hydrate bearing coal

引用

International Journal of Coal Science & Technology 2024年第1期11卷 61-77页

作者： xia Gao Nannan Wang Baoyong Zhang Qiqi Lin Qiang Wu Wei Meng xia Liu Department of Architecture and Civil Engineering Heilongjiang University of Science and TechnologyHarbin150022China School of Qilu Transportation Shandong UniversityJinan250061China Department of Safety Engineering Heilongjiang University of Science and TechnologyHarbin150022China Jining Hongxiang Highway Survey Design and Research Institute Co.Ltd Jining272000China

To analyze the relationship between macro and meso parameters of the gas hydrate bearing coal(GHBC)and to calibrate the meso-parameters,the numerical tests were conducted to simulate the laboratory triaxial compression tests by PFC3D,with the parallel bond model employed as the particle contact constitutive ***,twenty simulation tests were conducted to quantify the relationship between the macro–meso ***,nine orthogonal simulation tests were performed using four meso-mechanical parameters in a three-level to evaluate the sensitivity of the meso-mechanical ***,the calibration method of the meso-parameters were then ***,the contact force chain,the contact force and the contact number were examined to investigate the saturation effect on the meso-mechanical behavior of *** results show that:(1)The elastic modulus linearly increases with the bonding stiffness ratio and the friction coefficient while exponentially increasing with the normal bonding strength and the bonding radius *** failure strength increases exponentially with the increase of the friction coefficient,the normal bonding strength and the bonding radius coefficient,and remains constant with the increase of bond stiffness ratio;(2)The friction coefficient and the bond radius coefficient are most sensitive to the elastic modulus and the failure strength;(3)The number of the force chains,the contact force,and the bond strength between particles will increase with the increase of the hydrate saturation,which leads to the larger failure strength.

关键词： Gas hydrate bearing coal Discrete element method Triaxial compression test Macro-meso mechanical propertie

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

mtDNA-triggered pH response signal-amplified fluorescent probe for multiple cell discrimination

引用

Chinese Chemical Letters 2024年第3期35卷 363-368页

作者： Tianping xia Yanxian Hou Zhuoran xia Gengwen Chen Peichen Tang Jiangli Fan xiaojun Peng State Key Laboratory of Fine Chemicals Frontiers Science Center for Smart Materials Oriented Chemical EngineeringDalian University of TechnologyDalian 116024China Hematology Reagent R&D Department Mindray Bio-medical Electronics Co.Ltd.Shenzhen 518132China Research Institute of Dalian University of Technology in Shenzhen Shenzhen 518057China

Developing fluorescence probes with multiple responses has vital significance but remains ***,for the first time,we present a mitochondrial DNA(mtDNA)-triggered pH response signalamplified fluorescent probe(QCY-DBT)for multiple cell *** probe exhibited a large stokes shift(229 nm),excellent DNA selectivity over RNA,and ultrasensitivity of detection limit(DL;74.0 ng/mL).Thus,QCY-DBT was successfully applied to analyze multiple human peripheral blood cells and visualize mtDNA in healthy and apoptotic *** the tumor acidic environment(pH 6.0–7.0),the absorbance of QCY-DBT at 436 nm increased,and the fluorescence signal(665 nm)was amplified by mtDNA,which enabled the direct observation of tumor *** study provides help in designing smart probes with multiple responses for efficient abnormal cell detection.

关键词： Fluorescence probe Mitochondrial DNA pH response Peripheral blood cells Multiple cell detection

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Elliptical encirclement control capable of reinforcing performances for UAVs around a dynamic target

引用

Defence Technology（防务技术） 2024年第2期32卷 104-119页

作者： Fei Zhang Xingling Shao Yi xia Wendong Zhang National Key Laboratory for Electronic Measurement Technology School of Instrument and ElectronicsNorth University of ChinaTaiyuan030051China

Most researches associated with target encircling control are focused on moving along a circular orbit under an ideal environment free from external ***,elliptical encirclement with a time-varying observation radius,may permit a more flexible and high-efficacy enclosing solution,whilst the non-orthogonal property between axial and tangential speed components,non-ignorable environmental perturbations,and strict assignment requirements empower elliptical encircling control to be more challenging,and the relevant investigations are still *** this line,an appointed-time elliptical encircling control rule capable of reinforcing circumnavigation performances is developed to enable Unmanned Aerial Vehicles(UAVs)to move along a specified elliptical path within a predetermined reaching *** remarkable merits of the designed strategy are that the relative distance controlling error can be guaranteed to evolve within specified regions with a designer-specified convergence ***,wind perturbations can be online counteracted based on an unknown system dynamics estimator(USDE)with only one regulating parameter and high computational *** tool demonstrates that all involved error variables are ultimately limited,and simulations are implemented to confirm the usability of the suggested control algorithm.

关键词： Elliptical encirclement Reinforced performances Wind perturbations UAVs

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Numerical insight into heat transfer enhancement by granules inner-migration in a moving bed:A performance comparison between slanted-stick and plow-shaped agitator

引用

Particuology 2024年第6期89卷 109-116页

作者： Binfan Jiang Hao Pei Dehong xia Haiyang Wang School of Energy and Environmental Engineering University of Science and Technology BeijingBeijing 100083China Shunde Graduate School of University of Science and Technology Beijing Guangdong 528399China Jianlong Group&USTB Joint Laboratory Beijing 100083China

Waste heat recovery of high-temperature granules is one of the most promising sustainable energy supply and carbon reduction ways for industry.A moving bed indirect heat exchanger(MBIHE)with inner-migration was proposed for granular heat *** migration and the enhanced heat transfer induced by two types of agitators(i.e.,agitator with slanted stick A_(s)and with plow-shaped surface A_(p))in the MBIHE are analyzed based on DEM coupled with *** to the effective agitation,the average heat transfer coefficient in the granule side is enhanced to∼3 times compared to that without *** heat recovery efficiency in the moving bed reached more than 70%with the agitations of either A_(s)or A_(p).The heat efficiency of A_(s)is∼7%higher than that of A_(p),but with at least 60%greater rotational *** ensure reliable agitation,the A_(p)is suggested to be adopted in the MBIHE to induce granule migration.

关键词： Waste heat recovery High-temperature granule Granule migration Heat transfer enhancement Industry energy saving

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

DEM investigation of strength and critical state behaviours of granular materials under true triaxial loadings

引用

Particuology 2024年第2期85卷 198-212页

作者： Minyi Zhu Guobin Gong Jun xia Stephen Wilkinson Department of Civil Engineering Xi'an Jiaotong-Liverpool UniversityChina Department of Civil Engineering and Industrial Design University of LiverpoolLiverpoolUK Faculty of Engineering and Information Sciences University of Wollongong in DubaiUnited Arab Emirates

This paper investigates the strength and critical state(CS)behaviours of granular materials via DEM simulations of true triaxial drained tests under three different loading modes including constant b(in-termediate stress ratio)tests with constantσ'1(major principal stress),constant p(mean pressure)and constantσ'3(minor principal stress)*** this end,a series of samples are generated with the same particle size distribution,and with the confining stresses ranging from 100 kPa to 900 *** CS is achieved for all *** the macroscopic behaviours and the microscopic behaviours are examined and compared considering different loading modes,confining stresses and intermediate stress ratios(b).The critical state lines(CSLs)are found to be unique and independent of the loading modes,but dependent on the b *** CSLs with b=0 and b=1 form the two boundaries of CSLs respectively beyond which CSLs under all other b tests cannot go *** different strength criteria are examined and compared in terms of both peak and CS *** Mohr-Coulomb strength criterion is found to be only suitable for axisymmetric loading *** Lade-Duncan criterion is only suitable for describing peak strengths,which is dependent on the loading modes and confining *** Satake criterion and Matsuoka-Nakai criterion are the more appropriate strength criteria for describing CS failures,indicating that the CS values of both the Satake parameter and the Matsuoka-Nakai parameter describe an inherent property that characterizes the CS failure for a given type of *** CS mechanical coordination number is fitted by a curved line for a given b value,which is unique regardless of the loading *** peak and CS values of both major and minor principal fabric tensors decrease with increasing b values,while they increase with increasing b values for the intermediate principal fabric tensor.

关键词： Discrete element method Intermediate stress ratio Dilation Critical state Failure criterion

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：