检索结果-南通市图书馆

Optimization of chemistry and process parameters for control of intermetallic formation in Mg sludges

Journal of Magnesium and Alloys 2024年第4期12卷 1431-1448页

作者： y.Fu G.G.Wang A.Hu y.Li K.b.Thacker J.p.Weiler H.Hu Department of Mechanical Automotive and Materials EngineeringUniversity of Windsor401 Sunset AveWindsorOntario N9B 3P4Canada Global Technology Centre Meridian Lightweight Technologies25 MacNab AveStrathroyOntario N7G 4H6Canada

Intermetallic formation in sludge during magnesium(Mg)melting,holding and high pressure die casting practices is a very important ***,very often it is overlooked by academia,original equipment manufacturers(OEM),metal ingot producers and even die *** aim of this study was to minimize the intermetallic formation in Mg sludge via the optimization of the chemistry and process *** Al8Mn5 intermetallic particles were identified by the microstructure analysis based on the Al and Mn *** design of experiment(DOE)technique,Taguchi method,was employed to minimize the intermetallic formation in the sludge of Mg alloys with various chemical compositions of Al,Mn,Fe,and different process parameters,holding temperature and holding *** sludge yield(Sy)and intermetallic size(IS)was selected as two *** optimum combination of the levels in terms of minimizing the intermetallic formation were 9 wt.%Al,0.15 wt.%Mn,0.001 wt.%(10 ppm)Fe,690℃ for the holding temperature and holding at 30 mins for the holding time,*** best combination for smallest intermetallic size were 9 wt.%Al,0.15 wt.%Mn,0.001 wt.%(10 ppm)Fe,630℃ for the holding temperature and holding at 60 mins for the holding time,*** groups of sludge factors,Chemical Sludge(CSF),physical Sludge(pSF)and Comprehensive Sludge Factors(and CpSF)were established for prediction of sludge yields and intermetallic sizes in Al-containing Mg *** CpSF with five independent variables including both chemical elements and process parameters gave high accuracy in prediction,as the prediction of the pSF with only the two processing parameters of the melt holding temperature and time showed a relatively large deviation from the experimental *** Chemical Sludge Factor was primarily designed for small ingot producers and die casters with a limited melting and holding capacity,of which process parameters could be fixed *** physical Sludge Factor could be used f

关键词： Magnesium sludge Al-Mn intermetallic Optimization Taguchi method Sludge factor Chemical composition process parameter

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Electron kinetic effects in back-stimulated Raman scattering bursts driven by broadband laser pulses

引用

Matter and Radiation at Extremes 2024年第4期9卷 54-67页

作者： Q.K.Liu L.Deng Q.Wang X.Zhang F.Q.Meng y.p.Wang y.Q.Gao H.b.Cai S.p.Zhu Graduate School China Academy of Engineering PhysicsBeijing 100088China Institute of Applied physics and Computational Mathematics Beijing 100094China School of Nuclear Science and Technology University of Science and Technology of ChinaHefei 230026China Shanghai Institute of Laser plasma Shanghai 201800China HEDpS Center for Applied Physics and TechnologyPeking UniversityBeijing 100871China School of physics Zhejiang UniversityHangzhou 310027China

We examine electron kinetic effects in broadband-laser-driven back-stimulated Raman scattering(bSRS)bursts using particle-in-cell *** bursts occur during the nonlinear stage,causing reflectivity spikes and generating large numbers of hot ***-duration simulations are performed to observe burst events,and a simplified model is developed to eliminate the interference of the broadband laser’s random intensity *** the simplified model,we isolate and characterize the spectrum of electron plasma *** spectrum changes from a sideband structure to a turbulence-like structure during the burst.A significant asymmetry in the spectrum is *** asymmetry is amplified and transferred to electron phase space by high-intensity broadband laser pulses,leading to violent vortex-merging and generation of hot *** proportion of hot electrons increases from 6.76%to 14.7%during a single violent burst *** demonstrate that kinetic effects profoundly influence the bSRS evolution driven by broadband lasers.

关键词： scattering kinetic simplified

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Quantum correlations and entanglement in coupled optomechanical resonators with photon hopping via Gaussian interferometric power analysis

引用

Chinese physics b 2024年第5期33卷 204-211页

作者： y.Lahlou b.Maroufi M.Daoud LpHE-MS Department of PhysicsFaculty of SciencesMohammed V UniversityRabatMorocco LpMS Department of PhysicsFaculty of SciencesIbn Tofail UniversityKénitraMorocco

Quantum correlations that surpass entanglement are of great importance in the realms of quantum information processing and quantum ***,for quantum systems prepared in pure states,it is difficult to differentiate between quantum entanglement and quantum ***,this indistinguishability is no longer holds for mixed *** contribute to a better understanding of this differentiation,we have explored a simple model for both generating and measuring these quantum *** study concerns two macroscopic mechanical resonators placed in separate Fabry–pérot cavities,coupled through the photon hopping *** system offers a comprehensively way to investigate and quantify quantum correlations beyond entanglement between these mechanical *** key ingredient in analyzing quantum correlation in this system is the global covariance *** forms the basis for computing two essential metrics:the logarithmic negativity(E_(N)^(m))and the Gaussian interferometric power(p_(G)^(m)).These metrics provide the tools to measure the degree of quantum entanglement and quantum correlations,*** study reveals that the Gaussian interferometric power(p_(G)^(m))proves to be a more suitable metric for characterizing quantum correlations among the mechanical modes in an optomechanical quantum system,particularly in scenarios featuring resilient photon hopping.

关键词： quantum correlations entanglement Gaussian interferometric power logarithmic negativity optomechanics photon hopping

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Thermo-kinetic characteristics on stabilizing hetero-phase interface of metal matrix composites by crystal plasticity finite element method

引用

Journal of Materials Science & Technology 2024年第2期169卷 53-67页

作者： y.b.Zhang S.J.Song F.Liu State Key Laboratory of Solidification processing Northwestern Polytechnical UniversityXi’an 710072China Analytical&Testing Center Northwestern Polytechnical UniversityXi’an 710072China

Using dislocation-based constitutive modeling in three-dimension crystal plasticity finite element(3D CpFE)simulations,co-deformation and instability of hetero-phase interface in different material systems were herein studied for polycrystalline metal matrix composites(MMCs).Local stress and strain fields in two types of 3layer MMCs such as fcc/fcc Cu-Ag and fcc/bcc Cu-Nb have been predicted under simple compressive ***,more severe strain-induced interface instability can be observed in the fcc/bcc systems than in the fcc/fcc systems upon refining to metallic nanolayered composites(MNCs).by detailed analysis of stress and strain localization,it has been demonstrated that the interface instability is always accompanied by high-stress concentration,i.e.,thermodynamic characteristics,or high strain prevention i.e.,kinetic characteristics,at the hetero-phase *** then follows that the thermodynamic driving forceG and the kinetic energy barrier Q during dislocation and shear banding can be adopted to classify the deformation modes,following the so-called thermo-kinetic *** by inserting a high density of high-energy interfaces into the Cu-Nb composites,such thermo-kinetic integration at the hetero-phase interface allows a successful establishment of MMCs with the high△G-high Q deformation mode,which ensures high hardening and uniform strain distri-bution,thus efficiently suppressing the shear band,stabilizing the hetero-phase interface,and obtaining an exceptional combination in strength and *** hetero-phase interface chosen by a couple of thermodynamics and kinetics can be defined as breaking the thermo-kinetic correlation and has been proposed for artificially designing MNCs.

关键词： Thermodynamics and kinetics physics-based constitutive modeling Hetero-phase interface Crystal plasticity finite element

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Evaluation of Industrial IoT Service providers with TOpSIS based on Circular Intuitionistic Fuzzy Sets

引用

Computers, Materials & Continua 2024年第7期80卷 715-746页

作者： Elif Çalo˘glu büyükselçuk Industrial Engineering Department Fenerbahçe University˙Istanbul34758Turkey

Industrial Internet of Things(IIoT)service providers have become increasingly important in the manufacturing industry due to their ability to gather and process vast amounts of data from connected devices,enabling manufacturers to improve operational efficiency,reduce costs,and enhance product *** platforms provide manufacturers with real-time visibility into their production processes and supply chains,allowing them to optimize operations and make informed *** addition,IIoT service providers can help manufacturers create new revenue streams through the development of innovative products and services and enable them to leverage the benefits of emerging technologies such as Artificial Intelligence(AI)and machine ***,the implementation of IIoT platforms in the manufacturing industry is crucial for companies seeking to remain competitive and meet the ever-increasing demands of customers in the digital *** this study,the evaluation criteria to be considered in the selection of IIoT service provider in small andmedium-sized(SME)manufacturing enterprises will be determined and IIoT service providers alternatives will be evaluated using the technique for order preference by similarity to an ideal solution(TOpSIS)method based on circular intuitionistic fuzzy *** on the assessments conducted in accordance with the literature review and expert consultations,a set of 8 selection criteria has been *** criteria encompass industry expertise,customer support,flexibility and scalability,security,cost-effectiveness,reliability,data analytics,as well as compatibility and *** evaluating these criteria,it was observed that the security criterion holds the highest significance,succeeded by cost-effectiveness,data analytics,flexibility and scalability,reliability,and customer support criteria,in descending order of *** the evaluation of seven distinct alternatives against these criteria,it was deduced tha

关键词： IIoT manufacturing TOpSIS circular intuitionistic fuzzy sets

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

polyolefin vitrimers bearing acetoacetate functionality

引用

Science China Chemistry 2024年第11期67卷 3861-3867页

作者： Zihao Wang yue Liu Wenmin pang Ao Chen Min Chen Chinese Academy of Sciences (CAS) Key Laboratory of Soft Matter Chemistry Department of Polymer Science and Engineering University of Science and Technology of China Institutes of physical Science and Information Technology Key Laboratory of Structure and Functional Regulation of Hybrid Materials of Ministry of Education Anhui University

polyolefin vitrimers are polymer networks bearing reversible covalent crosslinking points, enabling them to be reprocessed and recycled. In this contribution, a series of polyolefin vitrimers were designed based on the acetoacetate-functionalized polyolefin copolymers, which were produced through the direct copolymerization of ethylene with polar comonomers using a phosphinesulfonate palladium catalyst. The pendant acetoacetate group could mediate several characteristic reactions, such as the Michael addition reaction, ketone-amine condensation and metal coordination reaction. As such, structurally adjustable polyolefin vitrimers can be accessed by introducing various dynamic crosslinking bonds, including disulfide exchange, transamination of vinylogous urethane and labile metal coordination bond. The utilization of different crosslinking reactions and the mole ratio of crosslinkers significantly impact the material properties of the resultant polymers. Specifically, the generated polyolefin vitrimers demonstrated excellent reprocessability and closed-loop recycling properties. The study in this work provides an efficient strategy to access various polyolefin vitrimers.

关键词： polyolefin vitrimers acetoacetate group polar monomer olefin copolymerization

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Effect of Al_(2)O_(3)on the Mechanical properties of(b_(4)C+Al_(2)O_(3))/Al Neutron Absorbing Materials

引用

Acta Metallurgica Sinica(English Letters) 2024年第8期37卷 1411-1420页

作者： J.X.Cai b.M.Shi N.Li y.Liu Z.G.Zhang y.N.Zan Q.Z.Wang b.L.Xiao Z.y.Ma Shi‑Changxu Innovation Center for Advanced Materials Institute of Metal ResearchChinese Academy of SciencesShenyang 110016China Key Laboratory of Nuclear Materials and Safety Assessment Institute of Metal ResearchChinese Academy of SciencesShenyang 110016China Nuclear Equipment Division Beijing Institute of Nuclear EngineeringChina Nuclear Power Engineering Co.Ltd.Beijing 100840China Department of Materials Science School of Mechanical EngineeringShenyang UniversityShenyang 110044China

b_(4)C/Al composites are widely utilized as neutron absorbing materials for the storage and transportation of spent nuclear *** order to improve the high-temperature mechanical properties of b_(4)C/Al composites,in-situ nano-Al_(2)O_(3)was introduced utilizing oxide on Al powder *** this study,the Al_(2)O_(3)content was adjusted by utilizing spheroid Al powder with varying diameters,thereby investigating the impact of Al_(2)O_(3)content on the tensile properties of(b_(4)C+Al_(2)O_(3))/Al *** was found that the pinning effect of Al_(2)O_(3)on the grain boundaries could hinder the recovery of dislocations and lead to dislocation accumulation at high *** the result,with the increase in Al_(2)O_(3)content and the decrease in grain size,the high-temperature strength of the composites increased *** finest Al powder used in this investigation had a diameter of 1.4μm,whereas the resultant composite exhibited a maximum strength of 251 Mpa at room temperature and 133 Mpa at 350℃,surpassing that of traditional b_(4)C/Al composites.

关键词： Al matrix composites Neutron absorbing materials (b_(4)C+Al_(2)O_(3))/Al composites High-temperature strength

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Construction of 2D/2D Ti_(3)C_(2)T_(x)MXene/CdS heterojunction with photothermal effect for efficient photocatalytic hydrogen production

引用

Journal of Materials Science & Technology 2024年第4期171卷 1-9页

作者： T.y.Huang Z.yang S.y.yang Z.H.Dai y.J.Liu J.H.Liao G.y.Zhong Z.J.Xie y.p.Fang S.S.Zhang Key Laboratory for biobased Materials and Energy of Ministry of Education Guangdong Laboratory for Lingnan Modern AgricultureCollege of Materials and EnergySouth China Agricultural UniversityGuangzhou 510643China School of physics and Optoelectronics South China University of TechnologyGuangzhou 510640China School of Chemical Engineering and Energy Technology Guangdong Provincial Key Laboratory of Distributed Energy SystemsDongguan University of TechnologyDongguan 523808China

The insensitivity of semiconductors to visible and infrared light is a key constraint on the utilization of light energy in photocatalytic *** photocatalysts with full-spectrum absorption through surface engineering is an effective approach to fully harnessing light energy in semiconductor ***,a novel stable Ti_(3)C_(2)T_(x)MXene/CdS heterojunction catalyst is obtained by in-situ epitaxial growth of two-dimensional(2D)CdS nanosheets on 2D MXene interface via a solvothermal *** exceptional light absorption properties of MXene confer outstanding full-spectrum driven photocat-alytic hydrogen evolution capability upon the heterogeneous *** unique 2D/2D structure effectively mitigated the recombination of photogenerated carriers,enhancing the photocatalytic performance of the ***,the composite catalyst exhibits a significantly higher surface temperature of 80.4℃under visible light irradiation at an intensity of 0.1 W/cm^(2),which is 1.84 times higher than that of *** irradiation of visible and near infrared light,the composite catalyst with photothermal ef-fect demonstrates a remarkable hydrogen evolution rate of 65.4 mmol g^(-1)h^(-1),which is 7.2 times higher than that of CdS *** study introduces a novel approach for constructing full-spectrum absorption catalysts and expands the application of the photothermal effect in photocatalytic hydrogen evolution research.

关键词： Two-dimensional structure Heterostructure photothermal effect photocatalyst Hydrogen evolution

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

biocompatible biphasic Iontronics Enable Neuron-Like Ionic Signal Transmission

引用

Research 2024年第3期2024卷 795-796页

作者： Xiaoyi Wang Aleksandar p.Ivanov Joshua b.Edel Department of Chemistry Imperial College LondonMolecular Sciences Research HubLondon W12 OBZUK

biocompatible connections between external artificial devices and living organisms show promise for future neuroprosthetics and *** study in Science by Zhao and colleagues introduces a cascade-heterogated biphasic gel(HbG)iontronic device,which facilitates electronic-to-multi-ionic signal transduction for abiotic–biotic *** by neuron signaling,the HbG device demonstrated its biocompatibility by regulating neural activity in biological tissue,paving the way for wearable and implantable devices,including brain–computer interfaces.

关键词： asi Signal Neuron

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

precipitation transformation pathway and mechanical behavior of nanoprecipitation strengthened Fe-Mn-Al-C-Ni austenitic low-density steel

引用

Journal of Materials Science & Technology 2024年第7期174卷 157-167页

作者： y.F.An X.p.Chen L.Mei p.Ren D.Wei W.Q.Cao College of Materials Science and Engineering Chongqing UniversityChongqing 400044China Guangxi Engineering Research Center for Characteristic Metallic powder Materials School of Electronic EngineeringGuangxi University of Science and TechnologyLiuzhou 545006China Central Iron&Steel Research Institute Beijing 100081China

precipitation strengthening has been widely adopted in austenitic low-density steel owing to excellent hardened *** approach generally employs the coherentκ′carbides and non-coherent b2 *** the precipitation transformation pathway is decisive for further optimizing the microstructures under specific engineering ***,the detailed precipitation sequence of Fe-28Mn-11Al-1C-5Ni(wt%)austenitic low-density steel as well as its influence on mechanical prop-erties during aging process is systematically *** results reveal that nano-sizedκ′carbides domains(2 nm)exist in the solution-treated *** aging at 500℃for 1 h,the cuboidalκ′carbides(15-20 nm)uniformly disperse in austenite ***,after aging at 700℃for 15 min,the coarsenκ′carbides(30-35 nm)inhomogeneously distribute and align preferentially along the〈100〉***,extending the aging time to 60 min,the needle-type b2 particles replace theκ′carbides due to the enrichment of Ni elements at the phase boundaries among the austenite andκ′*** aging at 900℃,κ′carbides entirely dissolve into the austenite matrix,and the intragranular b2 particles are the sole precipitates in the austenite matrix and follow the K-S orientation relationship with *** work hardening capability seriously deteriorates due to the shearing ofκ′carbides by gliding *** the intragranular b2 particles preserve excellent work hardening rate by dislocations bow-out *** present work is meaningful for guiding the design of new generation dual-nano precipitation austenitic lightweight steel.

关键词： Lightweight steel κ′-carbides b2 particles Work hardening capability

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：