检索结果-南通市图书馆

Reduction effect of final-pass heavy reduction rolling on the texture development,tensile property and stretch formability of ZWK100 alloy plates

引用

Journal of Materials Science & Technology 2022年第16期111卷 211-223页

作者： b.Q.Shi L.Y.Zhao X.L.Shang b.h.nie D.C.Chen C.Q.Li Y.Q.Cheng School of Materials Science and hydrogen Energy Foshan UniversityFoshan 528000China School of Materials and Energy Guangdong University of TechnologyGuangzhouGuangdong 510006China GD Midea Air-Conditioning Equipment Co. Ltd.Foshan 528311China Guangdong Key Laboratory of hydrogen Energy Technology Foshan 528000China YunFu(Foshan)R&D Center of hydrogen Energy Standardization Yunfu 527326China

Obviously planar anisotropy due to‘TD split’orthotropic texture(TD indicates Transverse direction)always exist in the Rare-earth(RE)or Ca containing Mg alloy sheets,which is likely caused by the lowreduction rolling(and annealing)as revealed in our previous *** this work,the as-cast billets of a ZWK100 alloy were subjected to final-pass heavy reduction rolling(FhRR)at 500°C with different reductions(30%-70%)after rough rolling,aiming to investigate the reduction effect on the microstructure and texture *** results show that FhRR with higher reductions above 50%is in favor of shear banding formation but has little effect on the as-deformed texture components,and the excellent formability with single-pass reduction up to 70%is mainly ascribed to the activation of prismatic *** with reduction above 50%and annealing can generate uniform grain structures of~10μm and symmetrical‘oblique-line split’texture in(0001)pole figures,with basal poles tilting by about 50°from ND(Normal direction)towards some oblique-line of TD and RD(Rolling direction)as well as uniform distribution of counter lines as an annular shape,resulting in excellent elongation to failure of~50%and ultra-low planar anisotropyΔr_of~0.1 and high stretch formability(Erichsen value:8.1).The formation‘oblique-line split’texture in(0001)pole figures is mainly correlated with the preferred growth tendency of grains with■//RD,which was suggested to relate to the high mobility of some special boundaries such as 40°-45°■.The influences of starting textures on the mechanical properties,planar anisotropy and related deformation modes,as well as their correlations with the stretch formability were comparatively investigated with the‘TD split’orthotropic texture as a counterpoint.

关键词： Magnesium alloys Texture Plane anisotropy Stretch formability Rolled sheets

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Construct a 3D microsphere of hMX/b/Al/PTFE to obtain the high energy and combustion reactivity

引用

Defence Technology（防务技术） 2024年第2期32卷 45-54页

作者： Jian Wang Jie Chen Yaofeng Mao Yongjun Deng Wei Cao Fude nie Jun Wang Institute of Chemical Materials China Academy of Engineering PhysicsMianyang 621999PR China Shock and Vibration of Engineering Materials and Structures Key Lab of Sichuan Province Mianyang 621010PR China

Metal(aluminum and boron)based energetic materials have been wildly applied in various fields including aerospace,explosives and micro-devices due to their high energy ***,the low combustion efficiency and reactivity of metal fuels,especially boron(b),severely limit their practical ***,multi-component 3D microspheres of hMX/b/Al/PTFE(hbA)have been designed and successfully prepared by emulsion and solvent evaporation method to achieve superior energy and combustion *** reactivity and energy output of hbA are systematically measured by ignitionburning test,constant-volume explosion vessel system and bomb *** to the increased interfacial contact and reaction area,hbA shows higher flame propagation rate,faster pressurization rate and larger combustion heat of 29.95 cm/s,1077 kPa/s,and 6164.43 J/g,which is 1.5 times,3.5 times,and 1.03 times of the physical mixed counterpart(hbA-P).Meanwhile,hbA also shows enhanced energy output and reactivity than 3D microspheres of hMX/b/PTFE(hb)resulting from the high reactivity of *** reaction mechanism of 3D microspheres is comprehensively investigated through combustion emission spectral and thermal analysis(TG-DSC-MS).The superior reactivity and energy of hbA originate from the surface etching of fluorine to the inert shell(Al_(2)O_(3) and b_(2)O_(3))and the initiation effect of Al to *** work offers a promising approach to design and prepare high-performance energetic materials for the practical applications.

关键词： hMX/b/Al/PTFE 3D microspheres Surface etching Reaction mechanism

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Recent advances in small-scale hydrogel-based robots for adaptive biomedical applications

引用

Nano Research 2024年第2期17卷 649-662页

作者： Mingzhe nie Qilong Zhao Xuemin Du Institute of biomedical&health Engineering Shenzhen Institute of Advanced Technology(SIAT)Chinese Academy of Sciences(CAS)Shenzhen 518055China

Small-scale robots,ranging in size from micrometers to centimeters,have gained significant attention in the biomedical ***,conventional small-scale robots made of rigid materials encounter challenges in adapting themselves to the soft tissues and complicated environments of human *** to the rigid counterpart,small-scale hydrogel-based robots hold great promises due to their tissue-like low modulus,outstanding biocompatibility and accessible stimuli-responsive *** attributes offer small-scale hydrogel-based robots with multimodal locomotion and reinforced functions,further enhancing the adaptability in manipulation and tasks execution for various biomedical *** this review,we present recent advances in small-scale hydrogel-based *** first summarize the design principles of small-scale hydrogel-based robots including materials,fabrication techniques and manipulation strategies,then highlighting their upgraded functions and adaptive biomedical ***,we discuss existing challenges and future perspectives for small-scale hydrogel-based robots.

关键词： small-scale robot hydrogel locomotion multi-function adaptability

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Traditional Chinese Medicine Integrated Responsive Microneedles for Systemic Sclerosis Treatment

引用

Research 2024年第1期2023卷 139-147页

作者： Xi Luan Xiaoxuan Zhang Min nie Yuanjin Zhao Department of Rheumatology and Immunology Nanjing Drum Tower HospitalSchool of PharmacyClinical College of Traditional Chinese and Western MedicineNanjing University of Chinese MedicineNanjing 210023China State Key Laboratory of bioelectronics School of Biological Science and Medical EngineeringSoutheast UniversityNanjing 210096China

Traditional Chinese medicine,such as Tripterygium wilfordii and Paeonia lactiflora,has potential values in treating systemic sclerosis(SSc)and other autoimmune diseases,while their toxic side effect elimination and precise tropical drug delivery are still ***,we present multiple traditional Chinese medicine integrated photoresponsive black phosphorus(bP)microneedles(MNs)with the desired features for the SSc *** employing a template-assisted layer-by-layer curing method,such MNs with triptolide(TP)/paeoniflorin(Pae)needle tips and bP-hydrogel needle bottoms could be well *** combined administration of TP and Pae can not only provide anti-inflammatory,detoxification,and immunomodulatory effects to treat skin lesions in the early stage of SSc but also remarkably reduce the toxicity of single drug ***,the additive bPs possess good biocompatibility and near-infrared(NIR)responsiveness,imparting the MN photothermal-controlled drug release *** on these features,we have demonstrated that the traditional Chinese medicine integrated responsive MNs could effectively improve skin fibrosis and telangiectasia,reduce collagen deposition,and reduce epidermal thickness in the SSc mouse *** results indicated that the proposed Chinese medicine integrated responsive MNs had enormous potential in clinical therapy of SSc and other diseases.

关键词： needle precise template

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

A reduced-order model for fast predicting ionized flows of hypersonic vehicles along flight trajectory

引用

Chinese Journal of Aeronautics 2024年第1期37卷 89-105页

作者： Jingchao ZhANG Chunsheng nie Jinsheng CAI Shucheng PAN School of Aeronautics Northwestern Polytechnical UniversityXi’an 710072China Science and Technology on Space Physics Laboratory China Academy of Launch Vehicle TechnologyBeijing 100076China Institute of Extreme Mechanics Northwestern Polytechnical UniversityXi’an 710072China

An improved Reduced-Order Model(ROM)is proposed based on a flow-solution preprocessing operation and a fast sampling strategy to efficiently and accurately predict ionized hypersonic *** ROM is generated in low-dimensional space by performing the Proper Orthogonal Decomposition(POD)on snapshots and is coupled with the Radial basis Function(RbF)to achieve fast prediction ***,due to the disparate scales in the ionized flow field,the conventional ROM usually generates spurious negative ***,this issue is addressed by performing flow-solution preprocessing in logarithmic space to improve the conventional ***,extra orthogonal polynomials are introduced in the RbF interpolation to achieve additional improvement of the prediction *** addition,to construct high-efficiency snapshots,a trajectory-constrained adaptive sampling strategy based on convex hull optimization is *** evaluate the performance of the proposed fast prediction method,two hypersonic vehicles with classic configurations,i.e.a wave-rider and a reentry capsule,are used to validate the proposed *** two cases show that the proposed fast prediction method has high accuracy near the vehicle surface and the free-stream region where the flow field is *** with the conventional ROM prediction,the prediction results are significantly improved by the proposed method around the discontinuities,*** shock wave and the ionized *** a result,the proposed fast prediction method reduces the error of the conventional ROM by at least 45%,with a speedup of approximately 2.0×105compared to the Computational Fluid Dynamic(CFD)*** test cases demonstrate that the method developed here is efficient and accurate for predicting ionized hypersonic flows.

关键词： Reduced-order model Radial basis function Constrained sampling Transfer function Fast flow prediction Ionized hypersonic flows

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Fault diagnosis of hVAC system with imbalanced data using multi-scale convolution composite neural network

引用

building Simulation 2024年第3期17卷 371-386页

作者： Rouhui Wu Yizhu Ren Mengying Tan Lei nie School of Mechanical Engineering Hubei University of TechnologyWuhan430068China Industrial Research Institute of Xiangyang hubei University of Technology Xiangyang441100China

Accurate fault diagnosis of heating,ventilation,and air conditioning(hVAC)systems is of significant importance for maintaining normal operation,reducing energy consumption,and minimizing maintenance ***,in practical applications,it is challenging to obtain sufficient fault data for hVAC systems,leading to imbalanced data,where the number of fault samples is much smaller than that of normal ***,most existing hVAC system fault diagnosis methods heavily rely on balanced training sets to achieve high fault diagnosis ***,to address this issue,a composite neural network fault diagnosis model is proposed,which combines SMOTETomek,multi-scale one-dimensional convolutional neural networks(M1DCNN),and support vector machine(SVM).This method first utilizes SMOTETomek to augment the minority class samples in the imbalanced dataset,achieving a balanced number of faulty and normal ***,it employs the M1DCNN model to extract feature information from the augmented ***,it replaces the original Softmax classifier with an SVM classifier for classification,thus enhancing the fault diagnosis *** the SMOTETomek-M1DCNN-SVM method,we conducted fault diagnosis validation on both the AShRAE RP-1043 dataset and experimental dataset with an imbalance ratio of 1:*** results demonstrate the superiority of this approach,providing a novel and promising solution for intelligent building management,with accuracy and F1 scores of 98.45%and 100%for the RP-1043 dataset and experimental dataset,respectively.

关键词： fault diagnosis chiller imbalanced data SMOTETomek multi-scale neural networks

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Seed-assisted growth for high-performance perovskite solar cells:A review

引用

Journal of Energy Chemistry 2024年第9期96卷 588-610页

作者： Zhimin Fang Ting nie Jianning Ding Shengzhong(Frank)Liu Institute of Technology for Carbon Neutralization Yangzhou UniversityYangzhou 225127JiangsuChina Dalian National Laboratory for Clean Energy iChEMDalian Institute of Chemical PhysicsChinese Academy of SciencesDalian 116023LiaoningChina Key Laboratory of Applied Surface and Colloid Chemistry Ministry of EducationShaanxi Key Laboratory for Advanced Energy DevicesShaanxi Engineering Lab for Advanced Energy TechnologySchool of Materials Science and EngineeringShaanxi Normal UniversityXi’an 710119ShaanxiChina

The rapid increase in the power conversion efficiency(PCE)of perovskite solar cells(PSCs)is closely related to the development of deposition techinique for perovskite *** high-quality perovskite film enables efficient charge transportation and less trap states,which are eventually translated into enhanced device ***-assisted growth(SAG)is a potential technique for depositing highly-crystallized perovskite films with preferential crystal orientation among the numerous approaches related to crystallization *** this review,we summarize the recent advances in the SAG technique for both one-step and two-step processed perovskite ***,seeding at the buried interface and on the top surface are also *** present different seeds and their corresponding seeding mechanism in detail,such as inorganic nanomaterials,organic ammoniums,alkali metal halides,and perovskite ***,challenges and perspectives are proposed to investigate the potential expansion of seeding engineering in high-performance PSCs,particularly large-area devices.

关键词： Perovskite solar cell Seed Crystallization Efficiency

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Ameliorating the Strength-Modulus Synergy in GNPs Reinforced Mg-Zn-Zr Composites via Multidirectional Forging and hot Extrusion Deformation

引用

Acta Metallurgica Sinica(English Letters) 2024年第3期37卷 425-437页

作者： Yuhao Chen Kaibo nie Kunkun Deng Zhilong Liu Quanxin Shi College of Materials Science and Engineering Taiyuan University of TechnologyTaiyuan 030024China State Key Laboratory of Compressor Technology(Compressor Technology Laboratory of Anhui Province) Hefei 230031China Instrumental Analysis Center Taiyuan University of TechnologyTaiyuan 030024China

The integration of lightweight and high-modulus magnesium-based materials is becoming increasingly valued as structural materials due to the complexity and intelligence of industrial products like automobiles and *** this study,the graphene nanoplatelets(GNPs)/Mg-Zn-Zr composites with 0.5 wt%GNPs were successfully prepared by the combination of multidirectional forging(MDF)and hot extrusion(Ex).The newly-developed composites after multi-step deformation possessed excellent strength and modulus,with a tensile strength exceeding 375 MPa and an elastic modulus reaching 54 *** results revealed that the stripping and thinning of GNPs bands parallel to the extrusion direction occurred after MDF+Ex,which promoted the dynamic recrystallization and the formation of numerous fine *** significant improvement in comprehensive mechanical performances of the composites could be primarily ascribed to the refinement of grain size caused by the optimized distribution of GNPs,and efficient load transfer facilitated by the tight interface.

关键词： Magnesium matrix composites Graphene nanoplatelets(GNPs) Multi-step deformation Microstructure Strength-modulus

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Conductive edge-warping graphite mesas for robust structural superlubricity

引用

Science China(Technological Sciences) 2024年第7期67卷 2040-2049页

作者： FENG WeiJia LIU Ying MA Ming PENG DeLi nie Jinhui State Key Laboratory of Tribology in Advanced Equipment&Department of Mechanical Engineering Tsinghua UniversityBeijing 100084China Center for Nano and Micro Mechanics Tsinghua UniversityBeijing 100084China Institute of Superlubricity Technology Research Institute of Tsinghua University in ShenzhenShenzhen 518057China

Structural superlubricity(SSL) refers to a state of ultralow friction and zero wear when two solid surfaces slide against each other. Recent investigations have identified amorphous carbon at the edge of the graphite mesa as the primary source of friction in such SSL systems. here, the tensile stress of metal thin film is exploited to engineer vertically conductive edge-warping graphite mesas(EWGM). Through this approach, robust SSL performance is realized, demonstrated by sliding an 8 μm side length square EWGM on an atomically smooth Au substrate for 10000 cycles at a constant voltage of 1 m V. In this SSL system,differential friction coefficients lower than 1.5 × 10^(-4) are achieved, with static contact resistance between EWGM and Au substrate as low as 28Ω and sliding contact resistance as low as 32Ω. Moreover, the EWGM exhibits SSL behavior on polished Si wafer substrates. Furthermore, because of the no-edge contact with the substrate during sliding, friction is independent of the sliding speed of the EWGM. This study presents the first successful fabrication of conductive EWGM. Remarkably, in both EWGM-Au and EWGM-Si SSL systems, the measured frictions are more than one order of magnitude lower than those of ordinary self-retracting graphite mesas with no-edge warping, and no wear is observed during extended current-carrying ***, these findings establish a solid groundwork for the future realization of macroscale conductive SSL systems.

关键词： structural superlubricity graphite mesa contact resistance tensile stress edge warping

来源：

维普期刊数据库

同方期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Identification and Characteristics Analysis of Micro-Seismic Signals in the haima Seep Area

引用

Journal of Earth Science 2024年第1期35卷 288-291页

作者： Xiangchun Wang bing nie Zhiyu Wu Weiwei Wang hua Chen China University of Geosciences Beijing 100083China CNOOC China Limited Shenzhen BranchShenzhen 518000China Guangzhou Marine Geological Survey Guangzhou 511458China CNOOC China Limited Shanghai BranchShanghai 200335China

*** recent years,with the steady development of offshore energy exploration technology,submarine gas seepage sites,and their products are gradually being identified and *** submarine cold seep is a seepage phenomenon in which hydrocarbon gases stored deep in the seafloor are transported to seawater by gushing or seepage under the action of tectonic compression(Roy et al.,2019;Tinivella and Giustiniani,2016).

关键词： submarine Seismic offshore

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：