检索结果-南通市图书馆

Chemical-assisted MMP reduction on methane-oil systems:Implications for natural gas injection to enhanced oil recovery

引用

Petroleum 2024年第1期10卷 101-108页

作者： Mohamed Almobarak Matthew B.Myers Colin D.Wood Yongbing Liu ali saeedi Quan Xie Discipline of Petroleum Engineering WA School of Mines: Minerals Energy and Chemical Engineering Curtin University Commonwealth Scientific and Industrial Research Organization Curtin University Oil and Gas Innovation Centre Management State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation

Miscible natural gas injection is widely considered as a practical and efficient enhanced oil recovery technique. However, the main challenge in this process is the high minimum miscibility pressure（MMP）between natural gas and crude oil, which limits its application and recovery factor, especially in hightemperature reservoirs. Therefore, we present a novel investigation to quantify the effect of chemicalassisted MMP reduction on the oil recovery factor. Firstly, we measured the interfacial tension（IFT） of the methane-oil system in the presence of chemical or CO2to calculate the MMP reduction at a constant temperature（373K） using the vanishing interfacial tension（VIT） method. Afterwards, we performed three coreflooding experiments to quantify the effect of MMP reduction on the oil recovery factor under different injection *** interfacial tension measurements show that adding a small fraction（1.5 wt%） of the tested surfactant（SOLOTERRA ME-6） achieved 9% of MMP reduction, while adding 20 wt% of CO2to the methane yields 13% of MMP reduction. Then, the coreflooding results highlight the significance of achieving miscibility during gas injection, as the ultimate recovery factor increased from 65.5% under immiscible conditions to 77.2% using chemical-assisted methane, and to 79% using gas mixture after achieving near miscible condition. The results demonstrate the promising potential of the MMP reduction to significantly increase the oil recovery factor during gas injection. Furthermore, these results will likely expand the application envelop of the miscible gas injection, in addition to the environmental benefits of utilizing the produced gas by re-injection/recycling instead of flaring which contributes to reducing the greenhouse gas emissions.

关键词： Gas injection Enhanced oil recovery Miscibility Coreflooding

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Application of nanotechnology for enhancing oil recovery——A review

引用

Petroleum 2016年第4期2卷 324-333页

作者： Chegenizadeh Negin saeedi ali Quan Xie Department of Petroleum Engineering Curtin University

Nanotechnology has attracted a great attention in enhancing oil recovery(EOR) due to the costeffective and environmental friendly manner. The size of nanoparticles for EOR usually is in a range of 1—100 nm, which may slightly differ from various international organisations. Nano-particles exhibit significantly different properties compared to the same fine or bulk molecules because of much higher concentration of atoms at their surface as a result of ultra-small size. In particular, one of the most useful and fascinating properties of these particles is to creating a massive diffusion driving force due to the large surface area, especially at high *** studies have shown that nanoparticles can enhance oil recovery by shifting reservoir wettability towards more water-wet and reducing interfacial tension, yet this area is still open for discussion. It is worth noting that the potential of nanoparticles to reduce the oil viscosity, increase the mobility ratio, and to alter the reservoir permeability has not been investigated to *** on the operational conditions of the EOR process, some nanoparticles perform more effectively than others, thus leading to different levels of enhanced recovery. In this study, we aim to provide a summary on each of the popular and available nanoparticles in the market and list their optimum operational conditions. We classified nanoparticles into the three categories of metal oxide, organic and inorganic particles in this article.

关键词： Nanotechnology Application Enhanced oil recovery Mechanisms

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Most common surfactants employed in chemical enhanced oil recovery

引用

Petroleum 2017年第2期3卷 197-211页

作者： Chegenizadeh Negin saeedi ali Quan Xie Department of Petroleum Engineering Curtin University26 Dick Perry Avenue6151 KensingtonWestern AustraliaAustralia

Chemical enhanced oil recovery(EOR)and particularly surfactant injection has recently received a great deal of *** suggested recovery mechanisms after injecting surfactants include wettability alteration and IFT *** a surfactant is properly selected according to the environmental variables-such as pressure,temperature,salinity,it can lead to more efficient enhanced recovery from an oil *** the other hand,poor selection of the surfactant can result in a low recovery and can even become detrimental to the reservoir due to undesirable wettability alteration and possible rock dissolution resulting in a chemical reaction with displacing fluid and blockage of the pore ***,choosing the wrong surfactant without considering the rock mineralogy may result in high adsorption on the pore surface of the rock and unnecessary waste of *** is also worthy to note that surfactants are some of the most expensive chemicals used during *** literature review suggests that anionic surfactant are the preferred surfactant category for EOR especially when it comes to sandstone ***,in specific situations a better performance have been reported after injecting cationic,non-ionic or mixtures of both surfactants,particularly when dealing with carbonate *** paper presents in detail a review of the most commonly applied surfactants in EOR studies and the optimum application criteria for of each *** the best of the authors'knowledge,such detailed and comprehensive review is not available in the literature,presently.

关键词： Surfactants Enhanced oil recovery Wettability Interfacial tension

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Effect of multi-component ions exchange on low salinity EOR:Coupled geochemical simulation study

引用

Petroleum 2016年第3期2卷 215-224页

作者： Ehsan Pouryousefy Quan Xie ali saeedi Department of Petroleum Engineering Curtin UniversityWestern AustraliaAustralia

The mechanism(s)of Low salinity water flooding(LSWF)has been extensively investigated for 15 e20 years,as a cost-effective and environmentally friendly technique for improved oil ***,there is still no consensus on the dominant mechanism(s)behind low salinity effect due to the complexity of interactions in the Crude oil/Brine/Rock(COBR)*** wettability is most agreed mechanism of low salinity EOR ***,the mechanism(s)behind the wettability change is debated between multi-component ion exchange(MIE)and double layer expansion(DLE)in sandstone *** paper aims to investigate the effectiveness of MIE with a coupled geochemical-reservoir model using published experimental data reported by Nasralla and Nasr-El-Din[1].We created core-scale numerical models with parameters identical to those used in the *** simulated the low salinity effect using a commercial reservoir simulator,CMG-GEM,by coupling three chemical reactions:(1)aqueous reaction,(2)multi-component ion exchange,and(3)mineral dissolution and *** modelled the adsorption of divalent cations on the surface of the clay minerals during low salinity water *** results were compared with the experimental *** results show that the fractional adsorption of divalent cations(Ca^2+)increased almost 25%by injecting a 2000 ppm NaCl solution,compared to initial 10,000 ppm *** a 2000 ppm of CaCl2 solution,however,significantly increased the adsorbed Ca^2+from 0.1 to 1,which implies the complete saturation of mineral surface with divalent ***,injecting 50,000 ppm of CaCl2 solution also demonstrated the same effect as the 2000 ppm CaCl2 solution but with a faster *** combining the simulation and experimental results,we concluded that the multicomponent ion exchange is not the sole mechanism behind low salinity effect for two ***,almost 10%additional oil recovery was observed from the experime

关键词： Enhanced oil recovery Low salinity water flooding Geochemical reactions Numerical simulation

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Genuine entanglement under squeezed generalized amplitude damping channels with memory

引用

Chinese Physics B 2024年第2期33卷 158-163页

作者： Mazhar ali Department of Electrical Engineering Faculty of EngineeringIslamic University MadinahMadinah 107Saudi Arabia

We study genuine entanglement among three qubits undergoing a noisy process that includes dissipation, squeezing,and decoherence. We obtain a general solution and analyze the asymptotic quantum states. We find that most of these asymptotic states can be genuinely entangled depending upon the parameters of the channel, memory parameter, and the parameters of the initial states. We study Greenberger–Horne–Zeilinger(GHZ) states and W states, mixed with white noise,and determine the conditions for them to be genuinely entangled at infinity. We find that for these mixtures, it is possible to start with a bi-separable state(with a specific mixture of white noise) and end with genuine entangled states. However, the memory parameter μ must be very high. We find that in contrast to the two-qubit case, none of the three-qubit asymptotic states for n → ∞ are genuinely entangled.

关键词： genuine entanglement squeezed thermal baths multipartite states

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Heat transfer analysis in particle-laden flows using the immersed boundary method

引用

Particuology 2024年第7期90卷 394-403页

作者： ali Abbas Zaidi Department of Mechanical Engineering University of Manitoba75A Chancellors CircleWinnipegR3T 5V6Canada

This paper investigates an efficient immersed boundary method(IBM)for multiple-core CPU machines with local grid refinement for the calculation of heat transfer between fluids and finite-sized *** fluid momentum equations are solved by using the fractional step method,while the energy equation is solved by employing the second-order Adams-Bashforth *** efficient load balancing between the CPU cores,the coupling between particles and fluid is obtained by applying the body force in the fluid equations,which depends on the solid volume fraction of particles contained in each grid cell,and then by linearly interpolating the particle temperature and velocity on the fluid grid cell(in place of the delta function commonly used in literature).Several test cases from the literature are studied,and good agreement is observed between the simulation results and the ***,a scaling study on multiple core machines is performed,demonstrating the proposed IBM's capabilities for a significant reduction in processing time.

关键词： Heat transfer Immersed boundary method Particle resolved direct numerical simulations Fluid solid interactions

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Simulation of the deformable lateral boundaries in biaxial test using DEM

引用

Particuology 2024年第5期88卷 161-175页

作者： ali Momeni Barry Clarke Yong Sheng ali Hassanpour WSP 3 Wellington PlaceLeedsLS1 4APUK Hull University HullHU6 7RXUK School of Civil Engineering University of LeedsLeedsLS2 9JTUK School of Computer Science University of HullHullHU6 7RXUK School of Chemical and Process Engineering University of LeedsLeedsLS2 9JTUK

Applying the discrete element method(DEM)in soil mechanics can provide abundant information at the particle-scale and facilitates illustration of the macro-mechanical behaviour of soils based on the inter-particle *** triaxial test is one of the most common laboratory methods to study the macro-mechanical behaviour of particulate materials such as ***,many problems in geotechnical design can be assumed and simplified as a plane strain *** a biaxial test can be conducted to reproduce the macro-mechanical behaviour of soil,where the sample is enclosed by two horizontal rigid platens and a vertical latex membrane,which is a deformable continuous element and allows the enclosed specimen to deform freely while maintaining confining stress during *** paper presents an algorithm to represent physical and mechanical characteristics of latex membrane in the 2D DEM simulation of biaxial test using the PFC^(2D) *** investigate the impact of the lateral boundary conditions on the micro-macro mechanical behaviours of soil samples,two sets of DEM biaxial tests are conducted,*** rigid and deformable lateral boundary *** DEM modeling results indicate that the lateral boundary conditions have a significant effect on the micro-scale fabric properties,thickness and inclination of the shear *** comparison between these two simulations also demonstrates that the lateral boundary conditions play a major role in the peak and post-peak stress-strain behaviours as well as the dilation and critical state behaviours of granular soils.

关键词： Discrete element method Biaxial test Deformable boundaries Shear band Critical state Fabric anisotropy Geometrical stability index

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Sensing the heavy water concentration in an H_(2)O-D_(2)O mixture by solid-solid phononic crystals

引用

Chinese Physics B 2024年第4期33卷 493-498页

作者： Mohammadreza Rahimi ali Bahrami Optoelectronic and Nanophotonics Research Laboratory(ONRL) Faculty of Electrical EngineeringSahand University of TechnologyTabrizIran

A new method based on phononic crystals is presented to detect the concentration of heavy water(D_(2)O)in an H_(2)O-D_(2)O *** have been obtained and analyzed in the concentration range of 0%-10%and 90%-100%D_(2)O.A proposed structure of tungsten scatterers in an aluminum host is *** order to detect the target material,a cavity region is considered as a sound wave resonator in which the target material with different concentrations of D_(2)O is *** changing the concentration of D_(2)O in the H_(2)O-D_(2)O mixture,the resonance frequency undergoes a frequency *** 1%change in D_(2)O concentration in the H_(2)O-D_(2)O mixture causes a frequency change of about 120 *** finite element method is used as the numerical method to calculate and analyze the natural frequencies and transmission spectra of the proposed *** performance evaluation index shows a high Q factor up to 1475758 and a high sensitivity up to 13075,which are acceptable values for sensing *** other figures of merit related to the detection performance also indicate high-quality performance of the designed sensor.

关键词： phononic crystals sensor H_(2)O-D_(2)O mixture cavity

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Experimental Study on Heat Storage Properties Comparison of Paraffin/Metal Foams Phase Change Material Composites

引用

Journal of Thermal Science 2024年第2期33卷 469-478页

作者： Waqar AHMED Abid HUSSAIN Hanzla SHAHID Imran ali Hafiz Muhammad ali Department of Mechanical Engineering University of Engineering and TechnologyTaxila47080Pakistan Department of Mechanical Engineering Institute of Space TechnologyIslamabadPakistan Department of Mechanical Mechatronics and Manufacturing EngineeringUniversity of Engineering and Technology LahoreFaisalabad CampusPunjabPakistan Mechanical Engineering Department King Fahd University of Petroleum and MineralsDhahran31261Saudi Arabia Interdisciplinary Research Center for Renewable Energy and Power Systems(IRC-REPS) King Fahd University of Petroleum and MineralsDhahran31261Saudi Arabia

Heat storage properties of phase change materials(PCMs) are essential characteristics that perform a key role in thermal heat energy storage *** thermal properties of PCMs can be improved by developing metal foam/PCM *** addition of metal foam in PCMs has a significant effect on the thermal characteristics of *** this paper,the heat storage properties of two different metal foam/PCM composites were experimentally *** behavior of paraffin in metal foam(copper and iron-nickel)/paraffin composites concerning pure paraffin at a constant heat flux of 1000 W/m^(2) in three directions simultaneously(x,y,and z) was *** was infiltrated into copper and iron-nickel foams to develop composite materials which resulted in enhancing the thermal conductivity of the paraffin.A comparative analysis is made on the heat storage properties of paraffin in copper and iron-nickel foams/paraffin *** temperature distribution during the phase transition process is experimentally *** comparison indicates that temperature uniformity in copper foam/paraffin composite is better than in iron-nickel foam/paraffin composite and pure paraffin at the same heat *** results show that at heat flux of 1000 W/m^(2),the heat storage time for copper foam/paraffin composite is 20.63% of that of iron-nickel foam/paraffin composite.

关键词： heat storage capacity paraffin/metal foam composite temperature uniformity heat storage rate phase transition process

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Emerging Trends in Damage Tolerance Assessment:A Review of Smart Materials and Self-Repairable Structures

引用

Structural Durability & Health Monitoring 2024年第1期18卷 1-18页

作者： ali Akbar Firoozi ali Asghar Firoozi Department of Civil Engineering Faculty of Engineering&TechnologyUniversity of BotswanaGaboroneUB0061Botswana Department of Civil Engineering University Kebangsaan Malaysia(UKM)Bangi43600Malaysia

The discipline of damage tolerance assessment has experienced significant advancements due to the emergence of smart materials and self-repairable *** review offers a comprehensive look into both traditional and innovative methodologies employed in damage tolerance *** a detailed exploration of damage tolerance concepts and their historical progression,the review juxtaposes the proven techniques of damage assessment with the cutting-edge innovations brought about by smart materials and self-repairable *** subsequent sections delve into the synergistic integration of smart materials with self-repairable structures,marking a pivotal stride in damage tolerance by establishing an autonomous system for immediate damage identification and *** holistic approach broadens the applicability of these technologies across diverse sectors yet brings forth unique challenges demanding further innovation and ***,the review examines future prospects that combine advanced manufacturing processes with data-centric methodologies,amplifying the capabilities of these‘intelligent’*** review culminates by highlighting the transformative potential of this union between smart materials and self-repairable structures,promoting a sustainable and efficient engineering paradigm.

关键词： Damage tolerance smart materials self-repairable structures structural health monitoring synergy autonomous system advanced manufacturing data-driven methodologies

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：