检索结果-南通市图书馆

Journal of Power and Energy Engineering 2017年第5期5卷 14-27页

作者： Mehedi Hasan adel el-shahat Musfequr Rahman Department of electrical Engineering Georgia Southern University Statesboro GA USA Department of Mechanical Engineering Georgia Southern University Statesboro GA USA

The present work is based on the comparative study between “Blade-element- Momentum” (BEM) analysis and “Computational-Fluid-Dynamics” (CFD) analysis of small-scale horizontal axis wind turbine blade. In this study, the pitch is considered as fixed and rotor speed is variable. Firstly, the aerodynamic characteristics of three different specialized airfoils were analyzed to get optimum design parameters of wind turbine blade. Then BEM was performed with the application of the open source wind turbine design and performance computation software Q-Blade v0.6. After that, CFD simulation was done by Ansys CFX software. Here, k-ω “Shear-Stress-Transport” (SST) model was conducted for three-dimensional visualization of turbine performance. However, the best coefficient of performance was observed at 6o angle of attack. At this angle of attack, in the case of BEM, the highest coefficient of performance was 0.47 whereby CFD analysis, it was 0.43. Both studies showed good performance prediction which was a positive step to accelerate the continuous revolution in wind energy sector.

关键词： Wind Turbine Small Scale Blade Design Coefficient of Performance BEM CFD

Aerodynamic Performance and Vibration Analyses of Small Scale Horizontal Axis Wind Turbine with Various Number of Blades

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Power and Energy Engineering 2018年第6期6卷 76-105页

作者： Mosfequr Rahman Emile Maroha adel el shahat Valentin Soloiu Marcel Ilie Mechanical Engineering Department Georgia Southern University Statesboro USA electrical Engineering Department Georgia Southern University Statesboro USA

The need to generate power from renewable sources to reduce demand for fossil fuels and the damage of their resulting carbon dioxide emissions is now well understood. Wind is among the most popular and fastest growing sources of alternative energy in the world. It is an inexhaustible, indigenous resource, pollution-free, and available almost any time of the day, especially in coastal regions. As a sustainable energy resource, electrical power generation from the wind is increasingly important in national and international energy policy in response to climate change. Experts predict that, with proper development, wind energy can meet up to 20% of US needs. Horizontal Axis Wind Turbines (HAWTs) are the most popular because of their higher efficiency. The aerodynamic characteristics and vibration of small scale HAWT with various numbers of blade designs have been investigated in this numerical study in order to improve its performance. SolidWorks was used for designing Computer Aided Design (CAD) models, and ANSYS software was used to study the dynamic flow around the turbine. Two, three, and five bladed HAWTs of 87 cm rotor diameter were designed. A HAWT tower of 100 cm long and 6 cm diameter was considered during this study while a shaft of 10.02 cm diameter was chosen. A good choice of airfoils and angle of attack is a key in the designing of a blade of rough surface and maintaining the maximum lift to drag ratio. The S818, S825 and S826 airfoils were used from the root to the tip and 4° critical angle of attack was considered. In this paper, a more appropriate numerical models and an improved method have been adopted in comparable with other models and methods in the literature. The wind flow around the whole wind turbine and static behavior of the HAWT rotor was solved using Moving Reference Frame (MRF) solver. The HAWT rotor results were used to initialize the Sliding Mesh Models (SMM) solver and study the dynamic behavior of HAWT rotor. The pressure and velocity

关键词： Horizontal Axis Wind Turbine Power Coefficient Moment Coefficient Mode Shape Natural Frequency CFD Moving Reference Frame Sliding Mesh Model

Numerical and Experimental Investigation of Aerodynamic Performance of Vertical-Axis Wind Turbine Models with Various Blade Designs

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Power and Energy Engineering 2018年第5期6卷 26-63页

作者： Mosfequr Rahman Travis E. Salyers adel el-shahat Marcel Ilie Mahbub Ahmed Valentin Soloiu Mechanical Engineering Department Georgia Southern University Statesboro USA electrical Engineering Department Georgia Southern University Statesboro USA Engineering & Physics Department Southern Arkansas University Magnolia USA

Due to the importance and advantages of Vertical-axis wind turbines (VAWTs) over traditional horizontal-axis wind turbines (HAWTs), this paper is implemented. Savonius turbines with drag-based rotors are adopted from the two more extensive arrangements of vertical wind turbines because of their advantages. In this paper, six diverse rotor plans with measure up to cleared regions are analyzed with exploratory wind burrow testing and numerical reenactments. These proposed models incorporate a conventional Savonius with two different edges criteria and 90 degree helical bend models with two, three and four sharp edges. The models were designed using SolidWorks software then the physical models were 3D printed for testing. A subsonic open-sort wind burrow was utilized for Revolution per Minute (RPM) and torque estimation over a scope of wind speeds. ANSYS Fluent reenactments were utilized for dissecting streamlined execution by using moving reference outline and sliding lattice display methods. A 3-dimensional and transient strategy was utilized for precisely tackling torque and power coefficients. The five new rotor geometries have important advantages such as making a focal point of weight advance from the hub of revolution and causing more noteworthy torque on the turbine shaft contrasted with the customary Savonius turbine. Our new models with the names of CC model and QM model display cross-areas lessen the aggregate scope of negative torque on the edges by 20 degrees, contrasted with the customary Savonius demonstrate. Helical plans are better spread the connected torque over a total transformation resulting in positive torque over every single operational point. Moreover, helical models with 2 and 3 cutting edges have the best self-starting ability in low wind speeds. Helical VAWT with 3 edges starts revolution of 35 RPM at only 1.4 m/s wind speed under no generator stacking. The most noteworthy power coefficient is accomplished, both tentatively and numerically,

关键词： Vertical-Axis Wind Turbine VAWT Savonius Helical Wind Tunnel Computational Fluid Dynamics (CFD) ANSYS Fluent

Mafic and felsic magmatism in the Wadi Kalalat area, South Eastern Desert, Egypt: mineralogy, geochemistry and geodynamic evolution during the Neoproterozoic in the Nubian Shield

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Acta Geochimica 2024年第1期43卷 150-173页

作者： adel A.Surour Ahmed A.Madani Mohamed A.el-Sobky Faculty of Science Galala UniversityNew Galala CitySuez 43511Egypt Department of Geology Faculty of ScienceCairo UniversityGiza 12613Egypt Egyptian Mineral Resources Authority P.O.Box 11517AbbasiyaCairoEgypt

In the south Eastern Desert of Egypt,two contrasting types of magmatism(mafic and felsic) are recorded in the Wadi Kalalat area,and form the Gabal el Motaghiarat and Gabal Batuga intrusions,*** two intrusions post-dates ophiolitic and arc associations represented by serpentinite and metagabbro-diorite,*** mafic intrusion has a basal ultramafic member represented by fresh peridotite,which is followed upward by olivine gabbro and anorthositic or *** mafic intrusion pertains to the Alaskan-type mafic-ultramafic intrusions in the Arabian-Nubian Shield(ANS)being of tholeiitic nature and emplaced in a typical arc *** the other hand,the Gabal Batuga intrusion comprises three varieties of fresh A-type granites of high K-calc alkaline nature,which is peraluminous and garnetbearing in parts.A narrow thermal aureole in the olivine gabbro of the mafic intrusion was developed due to the intrusion of the Batuga *** results in the development of a hornfelsic melagabbro variety in which the composition changed from tholeiitic to a calc-alkaline composition due to the addition of S_(i)O_(2),Al_(2)O_(3),alkalis,lithosphile elements(LILEs) such as Rb(70 ppm) and Y(28 ppm) from the felsic *** the thermal aureole,Rb amounts 2-8 ppm and Y lies in the range elieved that the Gabal Batuga felsic intrusion started to emplace during the waning stage of an arc system,with transition from the pre-collisional(i.e.,arc setting) to post-collisional and within plate *** from which the Gabal Batuga granites were fractionated is high-K calc-alkaline giving rise to a typical post-collisional A-type granite(A_(2)-subtype) indicating an origin from an underplating crustal ***,it is stressed here that the younger granites in the ANS are not exclusively post-collisional and within-plate but most likely they started to develop before closure of the arc *** possible source(s) of mafic magmas

关键词： Wadi Kalalat Gabal el Motaghairat mafic intrusion Gabal Batuga felsic intrusion Arc setting Post-collision Within-plate

Genetic Variability and Phenotypic Correlations Study among Grain Quality Traits and Mineral elements Concentrations in Colored and Non-Colored Rice (Oryza sativa L.)

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Phyton-International Journal of Experimental Botany 2024年第7期93卷 1733-1748页

作者： adel A.Rezk Mohamed M.el-Malky Heba I.Mohamed Hossam S.el-Beltagi Agricultural Biotechnology Department College of Agricultural and Food ScienceKing Faisal UniversityAl-Ahsa31982Saudi Arabia Plant Pathology Research Institute Agriculture Research CenterGiza12619Egypt Rice Research and Training Center Field Crop Research InstituteAgriculture Research Center33717Egypt Biological and Geological Sciences Department Faculty of EducationAin Shams UniversityCairo11511Egypt Biochemistry Department Faculty of AgricultureCairo UniversityGiza12613Egypt

Twenty-four rice genotypes were examined to assess genetic variability,heritability,and correlations for seven-grain quality traits,eight nutritional elements,and *** revealed signiﬁcant differences for the quality traits *** every trait under study,the phenotypic coefﬁcient of variation was higher than the correspon-dence genotypic coefﬁcient of *** in a broad sense varied from 29.75%for grain length to 98.31%for the elongation *** percentage recovery had a highly signiﬁcant positive correlation with milling and head rice ***,milling percentage had a highly positive correlation with head rice *** amylose percentage,all the genotypes belonged to low amylose except the Hassawi-1 variety,which had intermediate amylose *** nutrition contents of magnesium(Mg),sodium(Na),potas-sium(K),calcium(Ca),copper(Cu),manganese(Mn),zinc(Zn),iron(Fe),or protein percentage gave different variations for 24 rice genotypes under all the nutritional *** the 24 genotypes,ten rice genotypes–HighNutrient-1,HighNutrient-2,HighNutrient-9,HighNutrient-8,HighNutrient-3,Hassawi-2,HighNutrient-7,HighNutrient-6,Hassawi-1,and HighNutrient-4–had the highest heist value for all nutritional and protein con-tents,and could be used as a donor to improving new *** was a positive and signiﬁcant correlation between magnesium Mg,K,Zn and ***,K had a positive correlation with zinc Zn,Fe,and protein *** analysis was divided into two groups:theﬁrst group included all genotypes rich in nutri-ents,while the remaining genotypes with low nutritional content were included in the second group.

关键词： Amylose cluster analysis genotypes grain quality mineral nutrition rice

Planning Target Volume Margin in Linac-Based Stereotactic Radiosurgery for Brain Metastases

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Cancer Therapy 2024年第7期15卷 265-272页

作者： Hany S. Attallah Radwa M. Hamed Khaled M. el-shahat Aliaa Mahmoud Mahmoud Abdallah Ibraheem Haggag Emad Moustafa adel Yassin Department of Radiation Oncology International Medical Center (IMC) Cairo Egypt Department of Radiation Oncology Armed Forces Medical Collogue (AFCM) Cairo Egypt Department of Medical Physics Al Azhar University Cairo Egypt Department of Medical Physics International Medical Center (IMC) Cairo Egypt Department of Medical Physics Department of Clinical Oncology Faculty of Medicine Zagazig University Zagazig Egypt

Background: The treatment of brain metastases with radiotherapy has shifted to the use of Stereotactic Radio-surgery (SRS). The technical issue of expanding the treatment volume around the Gross Tumor Volume (GTV) is a current debate. Radiotherapy centers use variable GTV-PTV margins, ranging from one to 2 mm. Material and Methods: We performed a dosimetric comparison in plans of twenty patients using three margins: PTV zero, PTV1, and PTV2. We also developed imaginary Peel volumes. These volumes are described as follows: Peel1 = PTV1 − GTV, Peel2 = PTV2 − GTV. Results: Our results showed that the mean PTV volume differed significantly across the different margins (p = 0.000). The V12 of the brain significantly varied as a function of PTV margin (p = 0.000). The target coverage and plan quality indices were not significantly different. The Peel volume dosimetric analysis showed that the mean dose was significantly higher in the nearby normal brain tissue: Peel1 (p = 0.022) and Peel 2 (p = 0.013). Conclusion: According to our dosimetric analysis, expanding the GTV into a PTV by 1 mm margin is more convenient than 2 mm.

关键词： SRS Brain Metastases PTV

Improved Manta Ray Foraging Optimizer-based SVM for Feature Selection Problems:A Medical Case Study

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Bionic Engineering 2024年第1期21卷 409-425页

作者： adel Got Djaafar Zouache Abdelouahab Moussaoui Laith Abualigah Ahmed Alsayat Faculty of informatics University of Science and Technology Houari BoumedieneAlgiersAlgeria LRIA Laboratory University of Science and Technology Houari BoumedieneAlgiersAlgeria Computer Science Department University of Mohamed El Bachir El IbrahimiBordj Bou ArreridjAlgeria Computer Science Department University of Ferhat AbbasSetifAlgeria Computer Science Department Prince Hussein Bin Abdullah Faculty for Information TechnologyAl al-Bayt UniversityMafraq 25113Jordan Department of Computer Science College of Computer and Information SciencesJouf UniversityJoufSaudi Arabia Department of electrical and Computer Engineering Lebanese American University13-5053ByblosLebanon Hourani Center for Applied Scientific Research Al-Ahliyya Amman UniversityAmman 19328Jordan MEU Research Unit Middle East UniversityAmman 11831Jordan Applied science research center Applied science private universityAmman 11931Jordan School of Computer Sciences Universiti Sains Malaysia11800 PenangMalaysia School of Engineering and Technology Sunway University Malaysia27500 Petaling JayaMalaysia

Support Vector Machine(SVM)has become one of the traditional machine learning algorithms the most used in prediction and classification ***,its behavior strongly depends on some parameters,making tuning these parameters a sensitive step to maintain a good *** the other hand,and as any other classifier,the performance of SVM is also affected by the input set of features used to build the learning model,which makes the selection of relevant features an important task not only to preserve a good classification accuracy but also to reduce the dimensionality of *** this paper,the MRFO+SVM algorithm is introduced by investigating the recent manta ray foraging optimizer to fine-tune the SVM parameters and identify the optimal feature subset *** proposed approach is validated and compared with four SVM-based algorithms over eight benchmarking ***,it is applied to a disease Covid-19 *** experimental results show the high ability of the proposed algorithm to find the appropriate SVM’s parameters,and its acceptable performance to deal with feature selection problem.

关键词： Support vector machine Parameters tuning Feature selection Bioinspired algorithms Manta ray foraging optimizer

New solutions for four novel generalized nonlinear fractional fifth-order equations

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Ocean Engineering and Science 2024年第1期9卷 59-65页

作者： Mehmet Senol Lanre Akinyemi Henrietta Nkansah Waleed adel Nevsehir HacıBekta¸s Veli University Department of MathematicsNevsehirTurkey Department of Mathematics Lafayette CollegeEastonPennsylvaniaUSA Department of Mathematics University of Cape CoastCape CoastGhana Department of Mathematics and Engineering Physics Faculty of EngineeringMansoura UniversityEgypt UniversitéFrançaise dÉgypte Ismailia Desert RoadEl ShoroukCairoEgypt

In this paper,new four fifth-order fractional nonlinear equations are derived and *** frac-tional terms are defined in the conformable sense and these equations are then solved using two effective methods,namely,the sub-equation and the generalized Kudryashov *** methods were tested on the proposed models and succeeded in finding new solutions with different values of parameters.A graphical representation of some results is provided and proves the efficiency and applicability of the proposed methods for providing solutions with known physical *** methods are good candi-dates for solving other similar problems in the future.

关键词： Conformable derivative Generalized Kudryashov method Sub-equation method Riccati equation Solitons

Efficiency of Bio-Fertilizing as One of the Natural Alternatives to Improve the Growth of Khaya senegalensis and Swietenia mahagoni Trees and for Sustainability

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Agricultural Sciences 2024年第2期15卷 292-310页

作者： Safaa A. S. Ghorab Nashwa H. Mohamed Nader A. el-Shanhorey Nabal S. el-shahat Amr R. Rabie Forestry and Timber Trees Department Horticulture Research Institute Agricultural Research Center Ismailia Egypt Forestry and Timber Trees Department Horticulture Research Institute Agricultural Research Center Alexandria Egypt Botanical Gardens Department Horticulture Research Institute Agricultural Research Center Alexandria Egypt Forestry and Timber Trees Department Horticulture Research Institute Agricultural Research Center Giza Egypt

A field experiment was carried out at Ismailia Research Station, Ismailia Governorate from 2020-2022 to improve the growth of Khaya senegalensis and Swietenia mahagoni by using a combination of mineral fertilizer (NPK) and biological fertilizer (Azotobacter chroococcum, Bacillus megatherium, and Bacillus circulant) as recommended dose under new sandy soils conditions. Split plot designed with four treatments (Control, (50% Mineral fertilizer (M.) + 50% Biological fertilizer (Bio.)), 100% M. and 100% Bio.) of each species. Vegetative growth, leaf area, tree biomass, stored carbon, basal area, tree volume, and in the soil both of microbial account and mineral content were determined. The experimental results showed no significant differences between studied species among the most studied parameters except for Khaya senegalensis which gave the highest significant difference in root biomass and below-stored carbon than Swietenia mahagoni. Evidently, the highest significant growth parameters were 100% mineral fertilizer followed by (50% M. + 50% Bio.) as compared with control. No significant difference between 100% M. and (50% M. + 50% Bio.) of shoot dry biomass (15.19 and 12.02 kg, respectively) and above-stored carbon (0.28 and 0.22 Mt, respectively). Microbial account and mineral content in soil were improved after cultivation of tree species compared to before planting and control, especially with 50% mineral fertilizer and 50% bio-fertilizer treatment. In conclusion, a treatment containing 50% mineral fertilizer and 50% bio-fertilizer has led to the ideal Khaya senegalensis and Swietenia mahagoni growth in sandy soil for cheaper and sustainable.

关键词： Khaya senegalensis Swietenia mahagoni Mineral Fertilizer Bio-Fertilizer Growth Parameters Tree Biomass Stored Carbon Sustainable

Performance Assessment of a Real PV System Connected to a Low-Voltage Grid

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Energy Engineering 2024年第1期121卷 13-26页

作者： Gaber Magdy Mostafa Metwally adel A.elbaset Esam Zaki electrical Engineering Department Faculty of Energy EngineeringAswan UniversityAswanEgypt `2Faculty of Engineering King Salman International UniversityEl-Tor46511Egypt electrical Engineering Department Faculty of EngineeringMinia UniversityMiniaEgypt Department of electromechanics Engineering Faculty of EngineeringHeliopolis UniversityCairoEgypt Computer Department Faculty of EngineeringModern Academy of Engineering&TechnologyCairoEgypt

The generation of photovoltaic(PV)solar energy is increasing continuously because it is renewable,unlimited,and clean *** the past,generation systems depended on non-renewable sources such as oil,coal,and ***,this paper assesses the performance of a 51 kW PV solar power plant connected to a low-voltage grid to feed an administrative building in the 6th of October City,*** performance analysis of the considered grid-connected PV system is carried out using power system simulator for Engineering(PSS/E)*** the PSS/E program,monitors and uses the power analyzer that displays the parameters and measures some parameters such as current,voltage,total power,power factor,frequency,and current and voltage harmonics,the used inverter from the type of grid inverter for the considered *** results conclude that when the maximum solar radiation is reached,the maximum current can be obtained from the solar panels,thus obtaining the maximum power and power *** total voltage harmonic distortion,a current harmonic distortion within permissible limits using active harmonic distortion because this type is fast in processing up to 300 *** connection between solar stations and the national grid makes the system more efficient.

关键词： Low-voltage grid photovoltaic(PV)system total harmonic distortion grid-connected PV system