检索结果-南通市图书馆

Numerical simulation on the multiphase flow and reoxidation of the molten steel in a two-strand tundish during ladle change

引用

International Journal of minerals,metallurgy and materials 2024年第7期31卷 1540-1553页

作者： Jingcheng Wang Zhentong Liu Wei chen Hongliang chen Lifeng Zhang School of mechanical Engineering Yanshan UniversityQinhuangdao 066004China School of materials Science and Engineering Tianjin UniversityTianjin 300350China School of mechanical and materials Engineering North China University of TechnologyBeijing 100144China

A 3D mathematical model was proposed to investigate the molten steel–slag–air multiphase flow in a two-strand slab continuous casting(CC)tundish during ladle *** study focused on the exposure of the molten steel and the subsequent reoxidation *** exposure of the molten steel was calculated using the coupled realizable k–εmodel and volume of fluid(VOF)*** diffusion of dissolved oxygen was determined by solving the user-defined scalar(UDS)***,the user-defined function(UDF)was used to describe the source term in the UDS equation and determine the oxidation rate and oxidation *** effect of the refilling speed on the molten steel exposure and dissolved oxygen content was also *** the refilling speed during ladle change reduced the refilling time and the exposure duration of the molten ***,the elevated refilling speed enlarged the slag eyes and increased the average dissolved oxygen content within the tundish,thereby exacerbating the reoxidation *** addition,the time required for the molten steel with a high dissolved oxygen content to exit the tundish varied with the refilling *** the inlet speed was 3.0 m·s^(-1)during ladle change,the molten steel with a high dissolved oxygen content exited the outlet in a short period,reaching a maximum dissolved oxygen content of 0.000525wt%.Conversely,when the inlet speed was 1.8 m·s^(-1),the maximum dissolved oxygen content was 0.000382wt%.The refilling speed during the ladle change process must be appropriately decreased to minimize reoxidation effects and enhance the steel product quality.

关键词： tundish ladle change reoxidation multiphase flow numerical simulation

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Effect of carbon material and surfactant on ink property and resulting surface cracks of fuel-cell microporous layers

引用

Chinese Journal of Chemical Engineering 2024年第5期69卷 1-12页

作者： Zhekun chen Weitong Pan Longfei Tang Xueli chen Fuchen Wang Engineering Research Center of Resource Utilization of Carbon-containing Waste with Carbon Neutrality Ministry of EducationEast China University of Science and TechnologyShanghai 200237China Key Laboratory of Pressure Systems and Safety Ministry of EducationEast China University of Science and TechnologyShanghai 200237China

Ensuring the consistency of electrode structure in proton-exchange-membrane fuel cells is highly desired yet challenging because of wide-existing and unguided cracks in the microporous layer(mPL). The first thing is to evaluate the homogeneity of mPL with cracks quantitatively. This paper proposes the homogeneity index of a full-scale mPL with an area of 50 cm~2, which is yet to be reported in the literature to our knowledge. Besides, the effects of the carbon material and surfactant on the ink and resulting mPL structure have been studied. The ink with a high network development degree produces an mPL with low crack density, but the ink with high PDI produces an mPL with low crack homogeneity. The polarity of the surfactant and the non-polarity of polytetrafluoroethylene(PTFE) are not mutually soluble,resulting in the heterogeneous PTFE distribution. The findings of this study provide guidelines for mPL fabrication.

关键词： Proton-exchange-membrane fuel cell microporous layer Crack density Crack homogeneity Polytetrafluoroethylene distribution Surfactant

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Analytical evaluation of steady-state solute distribution in through- diffusion and membrane behavior test under non-perfectly flushing boundary conditions

引用

Journal of Rock mechanics and Geotechnical Engineering 2024年第1期16卷 258-267页

作者： Guannian chen Yuchao Li Kristin mSample-Lord Shan Tong School of Civil&Environmental Engineering and Geography Science Ningbo UniversityNingbo315211China mOE Key Laboratory of Soft Soils and Geoenvironmental Engineering College of Civil Engineering and ArchitectureZhejiang UniversityHangzhou310058China Ningbo ZCONE High-tech Company Limited Ningbo315000China Department of Civil and Environmental Engineering Villanova UniversityVillanovaPAUSA

The through-diffusion and membrane behavior testing procedure using a closed-system apparatus has been widely used for concurrent measurement of diffusion and membrane efficiency coefficients of low-permeability clay-based barrier ***,the common assumption of perfectly flushing conditions at the specimen boundaries could induce errors in analyses of the diffusion coefficients and membrane *** this study,an innovative pseudo three-dimensional(3D)analytical method was proposed to evaluate solute distribution along the boundary surfaces of the soil-porous disks system,considering the non-perfectly flushing *** results were consistent with numerical models under two scenarios considering different inflow/outflow *** proposed model has been demonstrated to be an accurate and reliable method to estimate solute distributions along the *** calculated membrane efficiency coefficient and diffusion coefficient based on the proposed analytical method are more accurate,resulting in up to 50%less relative error than the traditional approach that adopts the arithmetic mean value of the influent and effluent *** retar-dation factor of the clay specimen also can be calculated with a revised cumulative mass ***,the simulated transient solute transport matched with experimental data from a multi-stage through-diffusion and membrane behavior test,validating the accuracy of the proposed method.

关键词： Diffusion testing membrane behavior Coupled transport Clay barrier Transport modeling

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Generation of polarized electron beams through self-injection in the interaction of a laser with a pre-polarized plasma

引用

High Power Laser Science and Engineering 2024年第3期12卷 62-68页

作者： L.R.Yin X.F.Li Y.J.Gu N.Cao Q.Kong m.Büscher S.m.Weng m.chen Z.m.Sheng Key Laboratory of Nuclear Physics and Ion-beam Application(moE) Institute of Modern PhysicsDepartment of Nuclear Science and TechnologyFudan UniversityShanghaiChina State Key Laboratory of High Field Laser Physics Shanghai Institute of Optics and Fine MechanicsChinese Academy of SciencesShanghaiChina SANKEN(Institute of Scientific and Industrial Research) Osaka UniversityOsakaJapan Sichuan Research Institute Shanghai Jiao Tong UniversityChengduChina Peter Grünberg Institut(PGI-6) Forschungszentrum JülichJülichGermany Institut für Laser-und Plasmaphysik Heinrich-Heine-Universität DüsseldorfDüsseldorfGermany Key Laboratory for Laser Plasmas(moE) School of Physics and AstronomyShanghai Jiao Tong UniversityShanghaiChina Collaborative Innovation Center of IFSA Shanghai Jiao Tong UniversityShanghaiChina Tsung-Dao Lee Institute Shanghai Jiao Tong UniversityShanghaiChina

Polarized electron beam production via laser wakefield acceleration in pre-polarized plasma is investigated by particlein-cell *** evolution of the electron beam polarization is studied based on the Thomas±Bargmann±michel±Telegdi equation for the transverse and longitudinal self-injection,and the depolarization process is found to be influenced by the injection *** the case of transverse self-injection,as found typically in the bubble regime,the spin precession of the accelerated electrons is mainly influenced by the ***,in the case of longitudinal injection in the quasi-1D regime(for example,*** et al.,***.110,135002(2013)),the direction of electron spin oscillates in the laser *** the electrons move around the laser axis,the net influence of the laser field is nearly zero and the contribution of the wakefield can be ***,an ultra-short electron beam with polarization of 99%can be obtained using longitudinal self-injection.

关键词： laser wakefield acceleration longitudinal self-injection particle-in-cell simulation polarized electron beam

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Solid polymer electrolyte-based high areal capacity all-solid-state batteries enabled with ceramic interlayers

引用

Nano Research 2024年第10期17卷 8803-8808页

作者： chenji Hu Daiqian chen Yage Huang Guoyong Xue Xi Liu Jingshu Wang Jun ma Bowen chen Qi chen Linsen Li Yanbin Shen Liwei chen School of Chemistry and Chemical Engineering in-situ Center for Physical SciencesShanghai Electrochemical Energy Device Research Center(SEED)and Frontiers Science Center for Transformative MoleculesShanghai Jiao Tong UniversityShanghai 200240China i-Lab CAS Center for Excellence in NanoscienceSuzhou Institute of Nano-Tech and Nano-Bionics(SINANO)Chinese Academy of SciencesSuzhou 215123China IDONANO Co Ltd Shanghai 201614China Future Battery Research Center Global Institute of Future TechnologyShanghai Jiao Tong UniversityShanghai 200240China

Solid polymer electrolytes(SPEs)based all-solid-state batteries(ASSBs)have attracted extensive attention as a promising candidate for next-generation energy storage *** ASSBs require high fabrication pressure to achieve high areal capacity,under which,however,SPEs struggle and risk damage or failure due to their low mechanical *** is also a lack of study on complex stress and strain SPEs experience during ASSB cell assembly ***,ceramic solid electrolytes are selected as interlayers to address the stress-strain conditions during *** a result,high areal capacity ASSBs with a LiCoO2 loading of 12 mg·cm^(-2) were assembled with SPE-based composite *** 200 cycles were carried out for these cells at a current density of 1 mA·cm^(-2) under room *** capacity decay of the battery at 200 cycles is observed to be as low as 0.06% per *** work identifies a critical issue for application of SPEs in ASSBs and provides a potential strategy for the design of SPE-based ASSBs with high specific energy and long cycle life.

关键词： all-solid-state batteries ceramic interlayer solid polymer electrolyte high areal capacity

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Evaluation of frictional pressure drop correlations for air-water and air-oil two-phase flow in pipeline-riser system

引用

Petroleum Science 2024年第2期21卷 1305-1319页

作者： Nai-Liang Li Bin chen School of Low-carbon Energy and Power Engineering China University of Mining and TechnologyXuzhou221116JiangsuChina State Key Laboratory of multiphase Flow in Power Engineering Xi’an Jiaotong UniversityXi’an710049ShaanxiChina

Accurate prediction of the frictional pressure drop is important for the design and operation of subsea oil and gas transporting system considering the length of the pipeline. The applicability of the correlations to pipeline-riser flow needs evaluation since the flow condition in pipeline-riser is quite different from the original data where they were derived from. In the present study, a comprehensive evaluation of 24prevailing correlation in predicting frictional pressure drop is carried out based on experimentally measured data of air-water and air-oil two-phase flows in pipeline-riser. Experiments are performed in a system having different configuration of pipeline-riser with the inclination of the downcomer varied from-2°to-5°to investigated the effect of the elbow on the frictional pressure drop in the riser. The inlet gas velocity ranges from 0.03 to 6.2 m/s, and liquid velocity varies from 0.02 to 1.3 m/s. A total of885 experimental data points including 782 on air-water flows and 103 on air-oil flows are obtained and used to access the prediction ability of the correlations. Comparison of the predicted results with the measured data indicate that a majority of the investigated correlations under-predict the pressure drop on severe slugging. The result of this study highlights the requirement of new method considering the effect of pipe layout on the frictional pressure drop.

关键词： Frictional pressure drop Pipeline-riser Gas-liquid two-phase flow Severe slugging Correlation

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

CFD investigation of structural effects of internal gas intake on powder conveying performance in fuel supply systems for aerospace engines

引用

Particuology 2024年第9期92卷 140-154页

作者： Guanlong Ren Haijun Sun Fangjun chen Wen Shen Yunzhen Cai Yihua Xu Henrik Ström Bilainu Oboirien Qingang Xiong School of Aircraft Engineering Nanchang Hangkong UniversityNanchang330063China Engineering Research Center of Aero-engine Technology for General Aviation Ministry of EducationNanchang330063China State Key Laboratory of Pulp and Paper Engineering South China University of TechnologyGuangzhou510640China Department of mechanics and maritime Sciences Chalmers University of TechnologyGöteborg41296Sweden Department of Chemical Engineering University of JohannesburgJohannesburg17011South Africa

Optimal design of gas intake in powder fuel supply systems is crucial for performance of aerospace *** is little research on the impact of intake structure on powder conveying *** novel internal intakes were proposed,which are spherical,cube-shaped,and *** validation,CFD simulations demonstrate that fluctuation of mass flow rate of powders in the dome-shaped intake is reduced by about 73.3%compared with the annular external *** trends of phase velocities are similar for the spherical and cube-shaped intakes,while those are similar for the annular external and dome-shaped internal *** of area of gas zone for the annular external and spherical internal intakes is larger than that for the cube-shaped and dome-shaped internal *** and relative pressure drop in the fluidization chamber have a stable stage,and fluctuation of relative pressure drop is small when dome-shaped internal intake is used.

关键词： Powder supply system Intake structure Dense gas-solid flow Two-fluid model Powder fluidization Pressure drop

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Integrating phosphorus management and cropping technology for sustainable maize production

引用

Journal of Integrative Agriculture 2024年第4期23卷 1369-1380页

作者： Haiqing Gong Yue Xiang Jiechen Wu Laichao Luo Xiaohui chen Xiaoqiang Jiao chen chen State Key Laboratory of Nutrient Use and management College of Resources and Environmental SciencesCollege of Resources and Environmental SciencesChina Agricultural UniversityBeijing 100193China Department of Sustainable Development Environmental Science and Engineering(SEED)KTH Royal Institute of TechnologyStockholm SE-10044Sweden Anhui Province Key Lab of Farmland Ecological Conservation and Pollution Prevention School of Resources and EnvironmentAnhui Agricultural UniversityHefei 230036China ministry of Education Key Laboratory for Biodiversity Science and Ecological Engineering National Observations and Research Station for Wetland Ecosystems of the Yangtze EstuaryInstitute of Biodiversity Science and Institute of Eco-ChongmingCollege of Life SciencesFudan UniversityShanghai 200438China

Achieving high maize yields and efficient phosphorus(P)use with limited environmental impacts is one of the greatest challenges in sustainable maize *** plant density is considered an effective approach for achieving high maize ***,the low mobility of P in soils and the scarcity of natural P resources have hindered the development of methods that can simultaneously optimize P use and mitigate the P-related environmental footprint at high plant *** this study,meta-analysis and substance flow analysis were conducted to evaluate the effects of different types of mineral P fertilizer on maize yield at varying plant densities and assess the flow of P from rock phosphate mining to P fertilizer use for maize production in China.A significantly higher yield was obtained at higher plant densities than at lower plant *** application of single superphosphate,triple super-phosphate,and calcium magnesium phosphate at high plant densities resulted in higher yields and a smaller environmental footprint than the application of diammonium phosphate and monoammonium *** scenario analyses suggest that combining the optimal P type and application rate with a high plant density could increase maize yield by 22%.Further,the P resource use efficiency throughout the P supply chain increased by 39%,whereas the P-related environmental footprint decreased by 33%.Thus,simultaneously optimizing the P type and application rate at high plant densities achieved multiple objectives during maize production,indicating that combining P management with cropping techniques is a practical approach to sustainable maize *** findings offer strategic,synergistic options for achieving sustainable agricultural development.

关键词： maize plant density mineral phosphorus fertilizer meta-analysis substance flow analysis

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Transient long-range distance measurement by a Vernier spectral interferometry

引用

Photonics Research 2024年第6期12卷 1107-1114页

作者： LIANG XU KUN WANG chen LIU WENYING chen CHI ZHANG XINLIANG ZHANG Wuhan National Laboratory for Optoelectronics Huazhong University of Science and TechnologyWuhan 430074China Optics Valley Laboratory Wuhan 430074China

Rapid and long-range distance measurements are essential in various industrial and scientific applications,and among them,the dual-comb ranging system attracts great attention due to its high ***,the tem-poral asynchronous sampling results in the tradeoff between frame rate and ranging precision,and the non-ambiguity range(NAR)is also limited by the comb cycle,which hinders the further advancement of the dual-comb ranging *** this constraint,we introduce a Vernier spectral interferometry to improve the frame rate and NAR of the ranging ***,leveraging the dispersive time-stretch technology,the dual-comb interferometry becomes spectral ***,the asynchronous time step is unlimited,and the frame rate is improved to 100 ***,dual-wavelength bands are introduced to implement a Vernier spectral interferometry,whose NAR is enlarged from 1.5 m to 1.5 ***,this fast and long-range system also demonstrated high precision,with a 22.91-nm Allan deviation over 10-ms averaging *** a result,the proposed Vernier spectral interferometry ranging system is promising for diverse applications that necessitate rapid and extensive distance measurement.

关键词： interferometry spectral system

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

machine learning optimization strategy of shaped charge liner structure based on jet penetration efficiency

引用

DEFENCE TECHNOLOGY 2024年第9期39卷 23-41页

作者： Zhao, Ziqi Li, Tong Sheng, Donglin chen, Jian Yan, Amin chen, Yan Wang, Haiying chen, Xiaowei Dai, Lanhong Chinese Acad Sci Inst Mech State Key Lab Nonlinear Mech Beijing 100190 Peoples R China Univ Chinese Acad Sci Sch Future Technol Beijing 100049 Peoples R China Univ Chinese Acad Sci Sch Engn Sci Beijing 100049 Peoples R China Beijing Inst Technol State Key Lab Explos Sci & Technol Beijing 100081 Peoples R China

Shaped charge liner (SCL) has been extensively applied in oil recovery and defense industries. Achieving superior penetration capability through optimizing SCL structures presents a substantial challenge due to intricate rate-dependent processes involving detonation-driven liner collapse, high-speed jet stretching, and penetration. This study introduces an innovative optimization strategy for SCL structures that employs jet penetration efficiency as the primary objective function. The strategy combines experimentally validated finite element method with machine learning (FEm-mL). We propose a novel jet penetration efficiency index derived from enhanced cutoff velocity and shape characteristics of the jet via machine learning. This index effectively evaluates the jet penetration performance. Furthermore, a multi-model fusion based on a machine learning optimization method, called XGBOOST-mFO, is put forward to optimize SCL structure over a large input space. The strategy's feasibility is demonstrated through the optimization of copper SCL implemented via the FEm-mL strategy. Finally, this strategy is extended to optimize the structure of the recently emerging CrmnFeCoNi high-entropy alloy conical liners and hemispherical copper liners. Therefore, the strategy can provide helpful guidance for the engineering design of SCL. (c) 2024 China Ordnance Society. Publishing services by Elsevier B.V. on behalf of KeAi Communications Co. Ltd. This is an open access article under the CC BY-NC-ND license.

关键词： Jet penetration efficiency Shaped charge liner FEm-mL XGBOOST mFO High-entropy alloy LONG ROD PERFORmANCE COmPRESSIBILITY EXTENSION SEARCH DESIGN mODEL

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：