检索结果-南通市图书馆

The earliest evidence for a microblade adaptation in the remote,high altitude regions of the Tibetan Plateau

Science China Earth Sciences 2024年第5期67卷 1561-1573页

作者： Yingshuai JIN Xiaoling ZHANg Shejiang wa.g Junyi gE Wei HE wa DA Yunyao TAN ziyi YANg Christopher MORgAN Xing gAO Institute of Vertebrate Paleontology and Paleoanthropology Chinese Academy of SciencesBeijing 100044China University of the Chinese Academy of Sciences Beijing 100049China Cultural Relics Conservation Institute of the Xizang Autonomous Region Lhasa 850000China Nagqu Culture and Tourism Bureau Nagqu 852000China University of Nevada Reno 89557USA

Microblade assemblages are among the most common prehistoric archaeological materials found on the Tibetan Plateau(TP)and are thought to indicate large scale migration to and settlement of the *** microblade sites,however,have been systematically excavated,especially in the remotest,highest-elevation regions of the *** timing of the large-scale arrival,spread,and permanent settlement of people on the TP therefore remains *** this paper,we report on a recently excavated site,Locality 3 of the Nwya Devu Site(ND3),located at 4600 meters above sea level(masl),near the shore of Ngoin Lake,on the interior *** analyses reveal a fairly typical microblade technological orientation and two types of microblade cores:wedge-shaped and semi-conical,which are similar to those found throughout North *** Optically Stimulated Luminescence(OSL)dating and AMS^(14)C dating,the age of ND3 ranges from 11 to 10 *** date range indicates ND3 is the oldest microblade site yet recorded in the remote,high-elevation regions of the TP and thus provides important information about when and how hunter-gatherers using microblades began exploiting the higher altitudes of the *** together,studies at ND3 and throughout the TP suggest that a microblade adaptation is associated with the first prolonged human occupation of the plateau and that microblades played a significant role in mediating the risks and facilitating the mobility necessary to permanently inhabit the TP.

关键词： The interior of Tibetan Plateau Nwya Devu locality 3 Microblade Early Holocene High altitude adaption

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Supramolecular Manipulation of Intracellular Acidic Vesicles to Improve Cellular Self-Repair and Self-Defense

引用

CCS Chemistry 2024年第6期6卷 1487-1498页

作者： ziyi wa.g Chen Sun Yu Dong Yuan-Fu Ding Chen Zhao Ian wa Ho Jiahong Lu Ruibing wa.g State Key Laboratory of Quality Research in Chinese Medicine Institute of Chinese Medical SciencesUniversity of MacaoTaipaMacao 999078China

Lysosomes are the“cell stomach”that digests various species including macromolecules and pathogens for self-repair and self-defense upon fusion with endosomes,autophagosomes,and ***,artificially manipulating intracellular vesicles could potentially promote lysosome-mediated intracellular digestion for disease prevention and ***,a supramolecular strategy to efficiently tether and fuse acidic vesicles(i.e.,lysosomes,late endosomes,autolysosomes,and phagosomes)has been developed for the first time to enhance the digestion of cellular wastes and foreign matter,including pathogens.A linear polyethylene glycol(PEg)derivative dually tagged with morpholine(MOR)and adamantane(ADA)on the opposite side,namely,MOR-PEg-ADA,was designed to target intracellular acidic vesicles via MOR and to decorate their surfaces with ***,the addition of cucurbit[7]uril(CB[7])grafted hyaluronic acid(HA)induced supramolecular tethering and fusion of acidic vesicles via strong host-guest interactions between CB[7]of CB[7]-HA and ADA residing on the surface of acidic *** a proof-ofconcept,the overall cellular metabolism,including endogenous autophagy and the exogenous endocytosis and phagocytosis,was effectively upregulated,demonstrating that supramolecular regulation of the dynamics of intracellular acidic vesicles may promote the lysosome’s digestion to significantly improve cellular self-repair and self-defense.

关键词： supramolecular chemistry organelle regulation intracellular acidic vesicles lysosomes selfdefense self-repair

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Added value of ratio of cross diameters of the appendix in ultrasound diagnosis of acute appendicitis

引用

World Journal of gastrointestinal Surgery 2024年第1期16卷 21-28页

作者： Feng-wa.gu Si-Ze Wu Department of Ultrasound The First Affiliated Hospital of Hainan Medical UniversityHaikou 570102Hainan ProvinceChina

BACKgROUND The maximum outer diameter(MOD)of the appendix is an essential parameter for diagnosing acute appendicitis,but there is space for improvement in ultrasound(US)diagnostic *** To investigate whether combining the ratio of the cross diameters(RATIO)of the appendix with MOD of the appendix can enhance the diagnostic performance of acute *** A retrospective study was conducted,and medical records of 233 patients with acute appendicitis and 112 patients with a normal appendix were *** MOD and RATIO of the appendix were calculated and tested for their diagnostic performance of acute appendicitis,both individually and in *** The RATIO for a normal appendix was 1.32±0.16,while for acute appendicitis it was 1.09±*** cut-off value for RATIO was determined to be≤*** area under the receiver operating characteristic curve(AUC)for diagnosing acute appendicitis using RATIO≤1.18 and MOD>6 mm was 0.870 and 0.652,*** was a significant difference in AUC between RATIO≤1.18 and MOD>6 mm(Pg the combination of RATIO≤1.18 and MOD>6 mm with MOD>6 mm alone,the combination showed increased specificity,positive predictive value(PPV),and ***,the sensitivity and negative predictive value *** Combining RATIO of the appendix≤1.18 and MOD>6 mm can significantly improve the specificity,PPV,and AUC in the US diagnosis of acute appendicitis.

关键词： Acute appendicitis Diameter Ratio Diagnosis Ultrasound

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Strengthening and control of second-phase particle precipitation in ferritic/austenitic/martensitic heat-resistant alloys:a review

引用

Journal of Iron and Steel Research(International) 2024年第1期31卷 3-23页

作者： Xue-cheng Peng Han-jie guo Xin-fang Zhang Yi-wa Luo Ye Sun Jing guo Rong-guang Yang Xiao-dan Zheng School of Metallurgical and Ecological Engineering University of Science and Technology Beijing(USTB)Beijing100083China Beijing Key Laboratory of Special Melting and Preparation of High-End Metal Materials University of Science and Technology Beijing(USTB)Beijing100083China Beijing Shougang gitane New MATERIALS Co. Ltd.Beijing102206China

Heat-resistant alloys with excellent mechanical properties are widely used in various fields,and further improvement in their properties is essential to meet the requirements in new-generation advanced supercritical boilers,nuclear reactors,superheaters,and other new materials *** effectively enhance the comprehensive performance of heat-resistant alloys,second-phase particle strengthening has been widely studied,and in the face of different service envi-ronments of advanced heat-resistant steels,the selection of suitable second-phase particles is essential to maximize the performance of these *** this end,three major types of reinforcing phases in heat-resistant alloys such as carbides,rare earth oxides,and intermetallic compounds are summarized.A comparative analysis of the precipitation behavior of the reinforcing phases with different types as well as the risks and means of controlling their use in service,is *** parameters for the application of various types of second-phase particles in heat-resistant alloys are provided to support the design and preparation of new ultrahigh-performance heat-resistant alloys.

关键词： Heat-resistant alloy Second-phase particle Carbide Rare earth oxide Intermetallic compound Strengthening

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Challenges and opportunities in the production of magnesium parts by directed energy deposition processes

引用

Journal of Magnesium and Alloys 2024年第5期12卷 1663-1686页

作者： gürel Cama Ali günen Iskenderun Technical University Faculty of Engineering and Natural SciencesDepartment of Mechanical Engineering31200˙Iskenderun-HatayTurkey Iskenderun Technical University Faculty of Engineering and Natural SciencesDepartment of Metallurgy and Materials Engineering31200 Iskenderun-HatayTurkey

Mg-alloys have gained considerable attention in recent years for their outstanding properties such as lightweight,high specific strength,and corrosion resistance,making them attractive for applications in medical,aerospace,automotive,and other transport ***,their widespread application is hindered by their low formability at room temperature due to limited slip *** Mg-alloys have low mechanical properties due to the presence of casting defects such as porosity and anisotropy in addition to the high *** casting methods benefit from established process optimization techniques for these problems,additive manufacturing methods are increasingly replacing casting methods in Mg alloys as they provide more precise control over the microstructure and allow specific grain orientations,potentially enabling easier optimization of anisotropy properties in certain *** metal additive manufacturing(MAM)technology also results in some manufacturing defects such as inhomogeneous microstructural evolution and porosity and additively manufactured Mg alloy parts exhibit lower properties than the wrought parts,they in general exhibit superior properties than the cast ***,MAM is a promising technique to produce Mg alloy *** energy deposition processes,particularly wire arc directed energy deposition(wa-DED),have emerged as an advantageous additive manufacturing(AM)technique for metallic materials including magnesium alloys,offering advantages such as high deposition rates,improved material efficiency,and reduced production costs compared to subtractive ***,the inherent challenges associated with magnesium,such as its high reactivity and susceptibility to oxidation,pose unique hurdles in the application of this *** review paper delves into the progress made in the application of DED technology to Mg-alloys,its challenges,and ***,the predominant imperfections,notably inhomo

关键词： Additive manufacturing DED processes Arc-DED Wire arc additive manufacturing(waAM) 3-D printing High deposition rate

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Deuterium distribution and behavior of blisters in pre-damaged and undamaged tungsten

引用

Tungsten 2024年第3期6卷 647-656页

作者： Cong Li Xiao-wa wa.g Ran-Ran Su Xuan-Xin Hu Shu-guang Wei Han-Jun Tu Li-Qun Shi Hong-Liang Zhang Key Laboratory of Nuclear Physics and Ion-Beam Application Institute of Modern Physics Fudan University School of Mechanical Engineering Shanghai Jiao Tong University Department of Materials Science and Engineering University of Wisconsin

Tungsten(W),as a plasma-facing material,is subjected to high fluence plasma,resulting in both radiation damage and deuterium(D) *** study explores the blistering behavior and D supersaturated layers in both pre-damaged and undamaged W *** achieve a uniform damage profile similar to neutron irradiation,carbon(C) ions with multiple energies and angles were *** samples were further irradiated with low-energy D ions under two fluences at temperatures from ～380 to 640 *** various experimental techniques,we found that pre-damaged W samples can effectively suppress the formation of blistering and lower the threshold temperature at which the surface remains free of *** also observed the prominent D supersaturated peaks within the depth of 20 nm in both pre-damaged and undamaged ***,a close correlation between blistering and the D supersaturation was *** results suggest that neutron irradiation in the fusion reactors could increase the critical D concentration for blistering,while a greater depth of damage facilitated the inward diffusion of D,thereby reducing the D concentration gradient and alleviating surface blistering.

关键词： Tungsten Deuterium Supersaturated layer Blister Ion irradiation Pre-damage

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Heavy Metal Remediation in AgoèNyivéLandfill Soils: Enhancing Stability through Organic Amendments

引用

Open Journal of Applied Sciences 2024年第4期14卷 961-975页

作者： Bassaï Magnoudéwa Bodjona Diyakadola Dihéénane Bafai gado Tchangbedji waste Management Treatment and Valorization Laboratory (GTVD) Faculty of Sciences University of Lom&#233 Lom&#233 Togo

The burial of waste in developing countries, which is often carried out without respect for environmental standards, constitutes a risk of contamination of soils and even groundwater given the toxic elements they contain. The objective of this work is to carry out a study of the retention of heavy metals through the contribution of cattle manure to soil samples from the final Agoè Nyivé landfill in Lomé, Togo. Soil samples from the final landfill were taken from the surface and depth at several locations to form a composite sample. The amendment of the composite sample was carried out with bovine manure on the mock-up in the Laboratory for six months. The determination of the total contents of heavy metals by the atomic absorption spectrophotometer (SAA) on the composite sample showed high contents exceeding the thresholds recommended by the AFNOR NF U 44-041 standard. Sequential extraction on these composite samples showed that the mobile portions of lead, cadmium, copper and zinc are respectively estimated at 78.06%, 50%, 28.89% and 91.59%. The bovine manure used to amend the landfill samples presents physicochemical parameters that can contribute to rendering heavy metals immobile in the soil matrix under natural conditions. The addition of manure initially made it possible to increase the values of pH, electrical conductivity, cation exchange capacity and organic matter, which promote the retention of heavy metals. Secondly, the addition of manure made it possible to reduce the mobile portion of the heavy metals studied;from 78.06% to 14.39% for lead, from 50% to 11.52% for cadmium, from 28.89% to almost 0% for copper and from 91.15% to 80.58% for zinc. The use of cattle manure as an amendment on the composite sample was decisive in reducing the mobility of heavy metals in the polluted soils of the final landfill.

关键词： Pollution Heavy Metals Soil Sequential Extraction Discharge

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Artificial intelligence system for outcome evaluations of human in vitro fertilization-derived embryos

引用

中华医学杂志(英文版) 2024年第16期137卷 2024 Jul 12页

作者： Sun Ling Li Jiahui Zeng Simiao Luo Qiangxiang Miao Hanpei Liang Yunhao Cheng Linling Sun Zhuo Tai wa Hou Han Yibing Yin Yun Wu Keliang Zhang Kang Department of Reproductive Medicine Guangzhou Women and Children’s Medical Center Guangzhou Medical University Guangzhou Guangdong China guangzhou National Laboratory Guangzhou Guangdong China Department of Reproductive Medicine Jiangmen Central Hospital Jiangmen Guangdong China Department of Ophthalmology Dongguan People’s Hospital The First School of Clinical Medicine Southern Medical University Dongguan Guangdong China Institute for Artificial Intelligence in Medicine Faculty of Medicine Macau University of Science and Technology Macau Special Administrative Region China Wenzhou Eye Hospital Institute for Advanced Studies on Eye Health and Diseases Wenzhou Medical University Wenzhou Zhejiang China Kiang Wu Hospital Macau Special Administrative Region China Faculty of Business City University of Macau Macau Special Administrative Region China State Key Laboratory of Reproductive Medicine and Offspring Health Center for Reproductive Medicine Institute of Women Children and Reproductive Health and Key laboratory of Reproductive Endocrinology of Ministry of Education Shandong University Jinan Shandong China

Background: In vitro fertilization (IVF) has emerged as a transformative solution for infertility. However, achieving favorable live-birth outcomes remains challenging. Current clinical IVF practices in IVF involve the collection of heterogeneous embryo data through diverse methods, including static images and temporal videos. However, traditional embryo selection methods, primarily reliant on visual inspection of morphology, exhibit variability and are contingent on the experience of practitioners. Therefore, an automated system that can evaluate heterogeneous embryo data to predict the final outcomes of live births is highly ***: We employed artificial intelligence (AI) for embryo morphological grading, blastocyst embryo selection, aneuploidy prediction, and final live-birth outcome prediction. We developed and validated the AI models using multitask learning for embryo morphological assessment, including pronucleus type on day 1 and the number of blastomeres, asymmetry, and fragmentation of blastomeres on day 3, using 19,201 embryo photographs from 8271 patients. A neural network was trained on embryo and clinical metadata to identify good-quality embryos for implantation on day 3 or day 5, and predict live-birth outcomes. Additionally, a 3D convolutional neural network was trained on 418 time-lapse videos of preimplantation genetic testing (PgT)-based ploidy outcomes for the prediction of aneuploidy and consequent live-birth ***: These two approaches enabled us to automatically assess the implantation potential. By combining embryo and maternal metrics in an ensemble AI model, we evaluated live-birth outcomes in a prospective cohort that achieved higher accuracy than experienced embryologists (46.1%vs. 30.7% on day 3, 55.0%vs. 40.7% on day 5). Our results demonstrate the potential for AI-based selection of embryos based on characteristics beyond the observational abilities of human clinicians (area under the curve: 0.769, 95% confidenc

关键词： Artificial intelligence Fertilizationin vitro Embryo implantation Blastocyst Aneuploidy Neural networks, computer Live birth

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Physico-Chemical Characterization of Wood Ash for Agronomic Purposes

引用

Journal of Agricultural Chemistry and Environment 2024年第2期13卷 235-250页

作者： Ayi Kévin Ajavon Bassaï Magnoudéwa Bodjona Diyakadola Dihéénane Bafai Laboratory waste Management Treatment and Recovery (GTVD) Faculty of Sciences University of Lome Lome Togo

The oil refinery of the food products company SOPAL, located in the port area of TOgO, produces an average of 200 kg of eucalyptus wood ash per day. This ash is stored in large quantities within the premises of the refinery, without any disposal solution. The aim of this study is to identify the physico-chemical properties of SOPAL’s wood ash for agronomic valorization. Physico-chemical analyses reveal the presence of major and secondary elements such as potassium (15.71 g/kg DM), phosphorus (27.90 g/kg DM), calcium (9.76 g/kg DM), magnesium (0.03 g/kg DM), sodium (1.24 g/kg DM), iron (1.49 g/kg DM) and manganese (7.82 g/kg DM). The pH is alkaline (12.97) with fairly high conductivity (24.10 mS/Cm). Heavy metals identified are cobalt (0.19 mg/kg DM), cadmium (0.10 mg/kg DM), lead (1.14 mg/kg DM), copper (19.77 mg/kg DM) and nickel (12.82 mg/kg DM). The results show that the ash contains considerable amount of major and secondary elements for agronomic uses.

关键词： Industry Wood Ash Heavy Metals Valorization

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Comprehensive Overview of Populus simonii Research in the Recent Years

引用

Open Journal of Ecology 2024年第5期14卷 419-434页

作者： Dandan Zhang Faujiah Nurhasanah Ritonga Tuya Siqin Runxian Song Zicheng Zhang Mingwei Tang Peilin Sun wa.gao Heilongjiang Institute of Atomic Energy Harbin China graduate School Padjadjaran University Bandung Indonesia Key Laboratory of Molecular Epigenetics of the Ministry of Education Northeast Normal University Changchun China

As an important ecological tree species in northern China, Populus simonii plays a crucial role in maintaining ecological balance and promoting environmental sustainability. The academic community has conducted a series of in-depth studies on this species, covering key areas such as genomics, survival mechanisms, and genetic breeding. Through the analysis of the genomic structure and function of P. simonii, we have not only revealed the molecular basis for its adaptation to harsh environments but also identified key genes that promote its growth and resistance to pests and diseases. Furthermore, exploring the survival mechanisms of P. simonii has deepened our understanding of its stress resistance traits, including how it effectively copes with abiotic stresses such as drought, salinization, and heavy metal pollution. In genetic breeding, significant progress has been made through the application of modern biotechnology, improving the growth rate and wood quality of P. simonii and enhancing its environmental adaptability and disease resistance. These research findings have not only enriched our knowledge of the biological characteristics of P. simonii but also provided a solid scientific foundation for its application in ecological restoration, forestry production, and environmental management.

关键词： Breeding Ecological Restoration genomics Populus simonii Resistance Mechanisms

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：