检索结果-南通市图书馆

Optoelectronics Letters 2024年第3期20卷 171-176页

作者： SUN Jiaxing LI Honglian yao Yuhang yan Qiongyan DONG Fang College of Quality and Technology Supervising Hebei UniversityBaoding 071000China National and Local Joint Engineering Center of Measuring Instruments and Metrology Systems Baoding 071000China Key Laboratory of Energy Measurement and Safety Detection Technology in Hebei Province Baoding 071000China

The origin of Angelica dahurica medicinal herbs varies, and their pharmacological effects also differ. In order to achieve rapid and accurate identification of the origin of Angelica dahurica medicinal herbs, this study utilizes laser induced breakdown spectroscopy(LIBS) technology combined with machine learning algorithms to identify the original source of Angelica dahurica. Sliced samples of Angelica dahurica were taken from four regions: Hebei, Henan, Zhejiang, and Sichuan. The spectral data from the sliced samples were used as features, and different algorithms including support vector machine(SVM), back propagation(BP) neural network, genetic algorithm-back propagation(GA-BP) neural network, particle swarm optimization-back propagation(PSO-BP) neural network, convolutional neural network(CNN), and CNN-SVM were employed to classify the origin of Angelica dahurica samples.

关键词： neural origin network

Unraveling engineering disturbance effects on deformation in red-bed mudstone railway cuttings:incorporating crack-facilitated moisture diffusion

在线全文

学校读者我要写书评

暂无评论

Journal of Mountain Science 2024年第5期21卷 1663-1682页

作者： HUANG Kang DAI Zhangjun yan Chengzeng yao Junkai CHI Zecheng CHEN Shanxiong State Key Laboratory of Geomechanics and Geotechnical Engineering Institute of Rock and Soil MechanicsChinese Academy of SciencesWuhan 430071China University of Chinese Academy of Sciences Beijing 100049China Faculty of Engineering China University of GeosciencesWuhan 430074China International Joint Research Center for Deep Earth Drilling and Resource Development China University of GeosciencesWuhan 430074China China Academy of Railway Sciences Corporation Limited Beijing 100081China

Red-bed mudstone, prevalent in southwest China, poses a formidable challenge due to its hydrophilic clay minerals, resulting in expansion, deformation, and cracking upon exposure to moisture. This study addresses uplift deformation disasters in high-speed railways by employing a moisture diffusion-deformation-fracture coupling model based on the finite-discrete element method(FDEM). The model integrates the influence of cracks on moisture diffusion. The investigation into various excavation depths reveals a direct correlation between depth and the formation of tensile cracks at the bottom of the railway cutting. These cracks expedite moisture migration, significantly impacting the temporal and spatial evolution of the moisture field. Additionally, crack expansion dominates hygroscopic deformation, with the lateral coordinate of the crack zone determining peak vertical displacement. Furthermore, key factors influencing deformation in railway cuttings, including the swelling factor and initial moisture content at the bottom of the cutting, are explored. The number of tensile and shear cracks increases with greater excavation depth, particularly concerning shear cracks. Higher swelling factors and initial moisture contents result in an increased total number of cracks, predominantly shear cracks. Numerical calculations provide valuable insights, offering a scientific foundation and directional guidance for the precise prevention, control, prediction, and comprehensive treatment of mudstone-related issues in high-speed railways.

关键词： Red-bed mudstone Railway cutting FDEM Moisture diffusion Deformation Crack

Disastrous effects of climate change on High Mountain Asia

在线全文

学校读者我要写书评

暂无评论

Advances in Climate Change Research 2024年第3期15卷 365-366页

作者： Peng CUI yao-Ming MA yan WANG Bin-BinWANG Institute of Geographic Sciences and Natural Resources Research The Chinese Academy of Sciences(CAS)Beijing 100101China Institute of Mountain Hazards and Environment CASChengdu 610041China China-Pakistan Joint Research Center on Earth Sciences CAS-HECIslamabad 45320Pakistan State Key Laboratory of Tibetan Plateau Earth System Environment and Resources(TPESER)Institute of Tibetan Plateau ResearchCASBeijing 100101China

High Mountain Asia(HMA),encompassing the Tibetan Plateau and the surrounding high mountain ranges of the Hindu Kush and Tianshan,is a region characterised by large terrain,complex topography and the interplay of vario... 详细信息

关键词： terrain Tianshan Tibetan

Defects in the grain interiors of 3 mol%yttria-stabilized tetragonal zirconia polycrystal ceramics with 0.25 wt%alumina

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Advanced Ceramics 2024年第4期13卷 469-477页

作者： yan Xiong Lian Luo yao Cheng Zhi Liu Qi Liu Weimin Wang Wei Ji School of Materials&Chemical Engineering Hubei Province Key Laboratory of Green Materials for Light IndustryHubei University of TechnologyWuhan 430068China Fujian Institute of Research on the Structure of Mater Chinese Academy of SciencesFuzhou 350002China Jiangxi Provincial Engineering Research Center for Multifunction Zirconia Materials Jiangxi Size Materials Co.Ltd.Jiujiang 332500China State Key Laboratory of Advance Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China

The presence of high-density defects is rarely observed in bulk 3 mol%yttria-stabilized tetragonal zirconia polycrystal(3Y-TZP)ceramics obtained through conventional pressureless *** the present work,fine-grained dense 147 nm 3Y-TZP ceramics were prepared by pressureless sintering of commercial 0.25 wt%alumina-doped zirconia powders at 1300℃.A novel discovery was reported in which large amounts of defects were present in the grain interiors of the *** phenomenon was further examined using three types of powder samples,and the reasons for defect formation were investigated by microstructural characterization using high-resolution transmission electron microscopy(HRTEM)analysis and Rietveld *** results confirmed the essential dependence of the defect formation on the alumina *** authors attributed the defect formation to the significant difference in ionic radii of the solvent and solute during the dissolution of alumina into the zirconia *** sintering kinetics were proposed to be enhanced by the presence of substantial defects,which consequently favored the low-temperature sintering of the alumina-doped zirconia ceramics.

关键词： 3 mol%yttria-stabilized tetragonal zirconia polycrystal(3Y-TzP)ceramics alumina addition microstructure defect

Magnesium-containing pellet regulating blast furnace ferrous burden interaction:softening-melting behavior and mechanism

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第7期31卷 1623-1635页

作者： Li-ming Ma Jian-liang Zhang yao-zu Wang Xiao-yong Ma Gui-lin Wang zhuo Li Hui-qing Jiang Zheng-jian Liu School of Metallurgical and Ecological Engineering University of Science and Technology BeijingBeijing 100083China School of Intelligence Science and Technology University of Science and Technology BeijingBeijing 100083China Lingyuan Iron and Steel Group Co. Lingyuan 122500LiaoningChina

MgO participates in all stages of sintering,pelletizing,and blast furnace ironmaking,and synergistically optimizing the distribution of MgO in ferrous burden can effectively enhance the interaction within the ferrous burdens and optimize the softening-melting properties of the mixed ***-containing pellets mixed with low-MgO sinter or mixed with high-MgO sinter in the blast furnace ferrous burden structure have opposite softening-melting performance *** the structure of the ferrous burden is magnesium-containing pellets mixed with low-MgO sinter,the magnesium-containing pellets can enhance the interaction of the ferrous burden in the process of softening-melting,which can optimize the composition of the slag phase and improve the slag *** the structure of the ferrous burden is magnesium-containing pellets mixed with high-MgO sinter,the magnesium-containing pellets weaken the interaction of the ferrous burden in the process of softening-melting,increase the content of the high melting point solid-phase particles in the slag,lead to an increase in the viscosity of the slag and difficult separation of the slag and iron,and decrease the permeability of the charge ***,to ensure good permeability of the mixed burden,the following measures are suggested:optimizing the MgO distribution of the ferrous burden,reducing the MgO content of the sinter to 1.96 wt.%,increasing the MgO content of the pellets to 1.03-1.30 wt.%,controlling the MgO/Al_(2)O_(3) ratio of the mixed burden within 1.15-1.32,narrowing the position of the cohesive zone,and maintaining an S value(permeability index)of approximately 150 kPa℃.

关键词： Ironmaking Ferrous burden Softening-melting property Interaction Permeability Slag

Atomic tailoring-induced deficiency in tungsten oxides for high-performance energy-related devices

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Tungsten 2024年第2期6卷 269-277页

作者： Jing-Huang Lin yao-Tian yan Jun-Lei Qi Chen-yang Zha Institute of Applied Physics and Materials Engineering Zhuhai UM Science and Technology Research InstituteUniversity of MacaoTaipaMacao SAR 999078China State Key Laboratory of Advanced Welding and Joining Harbin Institute of TechnologyHarbin 150001China Jiangmen Laboratory of Carbon Science and Technology Hong Kong University of Science and Technology(Guangzhou)Jiangmen 529199China Key Laboratory of Flexible Electronics School of Flexible Electronics(Future Technologies)Institute of Advanced MaterialsNanjing Tech UniversityNanjing 211816China

Nowadays,tungsten oxides,as a typical transition metal oxide,are widely and intensively investigated owing to their excellent material properties and device *** oxygen defi ciency in tungsten oxides is typically the key to enhance their performances for a variety of critical technological *** a gradual increase of oxygen defi ciency,various non-stoichiometric tungsten oxides can be formed by re-adjustment of the atomic arrangement,which exhibits superior performances than their traditional stoichiometric *** review mainly focuses on the recent advances in oxygen-defi cient tungsten oxides from the point of atomic structures,including the forming mechanism of non-stoichiometric tungsten oxides and the superiority of these oxygen-defi cient tungsten oxides in energy-related ***,the challenge and perspective of oxygen-defi cient tungsten oxides are also discussed.

关键词： Oxygen defi ciency Tungsten oxide Atomic structures Catalyst Storage

Populational change of CD4^(+)CD25^(+)Treg cells is responsible for the synergistic effect of the combination of RAMP2 with baicalin in treating recurrent spontaneous abortion mouse models

在线全文

学校读者我要写书评

暂无评论

Traditional Medicine Research 2024年第8期9卷 59-66页

作者： Cong Chen zhuo-Lan Li Jing-Tian Guo Wen-yao Xue Wei Guo Department of Gynecology Jiangsu Province Hospital of Chinese MedicineAffiliated Hospital of Nanjing University of Chinese MedicineNanjing 210029China Jiangsu Key Laboratory of Druggability of Biopharmaceuticals State Key Laboratory of Natural MedicinesSchool of Life Science and TechnologyChina Pharmaceutical UniversityNanjing 211198China

Background: The absence of a safe and effective therapy for recurrent spontaneous abortion due to a maternofetal failure in immunological tolerance remains an intractable clinical obstacle for surgeons. Recently, traditional Chinese medicine has become a feasible alternative for certain diseases, including recurrent spontaneous abortion. However, because of the complex composition of the traditional Chinese medicine formula, its action mechanism remains unclear. Methods: We selected two isolated active ingredients (RAMP and baicalin) from the traditional Chinese medicine formula and used an abortion-prone CBA/J × DBA/2 model to simulate human RSA and compared the changes in fetal resorption rate, Treg cell percentage, and relevant cytokines before and after combination therapy. In addition, The mechanisms were preliminarily discussed using in vitro differentiation models. Results: In CBA/J × DBA/2 abortion-prone mice, the combination therapy resulted in a lower embryo resorption rate compared to that obtained with individual delivery of either RAMP or baicalin, thereby playing an embryo-protective role through the increase in Treg cells for the maintenance of maternal-fetal immune tolerance. In in vitro primary cell differentiation experiments, the concentration of Treg cells significantly increased from 11% to 17.9% after the combination therapy compared to that of the single administration group. Conclusion: the synergistic effects of RAMP and baicalin were responsible for Treg differentiation. The present study provides a solid basis for improving the applicability of traditional Chinese herbs in the treatment of recurrent spontaneous abortion.

关键词： recurrent spontaneous abortion Atractylodes macrocephala Koidz. Scutellaria baicalensis Georgi CBA/J×DBA/2 regulatory T cells

Evaluation of the injection and plugging ability of a novel epoxy resin in cement cracks

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Petroleum Science 2024年第2期21卷 1211-1220页

作者： Guang-yao Leng Wei yan Hai-Mu Ye Er-Dong yao Ji-Bin Duan Zheng-Xian Xu Ke-Pei Li Jing-Ru Zhang Zhong Li State Key Laboratory of Petroleum Resource&Prospecting China University of Petroleum(Beijing)Beijing102249China CNPC Liaohe Oilfield Gas Storage Co.LTD Panjin124000LiaoningChina CNOOC Research Institute Co. Ltd.Beijing100028China

Sustained casing pressure(SCP)is a crucial issue in the oil and gas production *** resins,exhibiting exceptional compressive strength,ductility,and shear bonding strength,have the potential to form reliable *** injectivity and sealing capacity of the epoxy resin is crucial parameters for the success of shallow remediation *** study aimed to develop and assess a novel solid-free resin sealant as an alternative to Portland cement for mitigating fluid *** investigation evaluated the viscosity,compressive strength,and brittleness index of the epoxy resin sealant,as well as its tangential and normal shear strengths in conjunction with casing *** flow characteristics and sealing abilities of conventional cement and epoxy resin were comparatively analyzed in *** results showed that the application of a viscosity reducer facilitated control over the curing time of the epoxy resin,ranging from 1.5 to 6 h,and reduced the initial viscosity from 865.53 to 118.71 m Pa,*** mechanical properties of the epoxy resin initially increased with a rise in curing agent content before experiencing a minor *** epoxy resin containing 30%curing agent exhibited optimal mechanical *** a 14-day curing period,the epoxy resin's compressive strength reached81.37 MPa,2.12 times higher than that of cement,whereas the elastic modulus of cement was 2.99 times greater than that of the epoxy *** brittleness index of epoxy resin is only 3.42,demonstrating high flexibility and *** tangential and normal shear strengths of the epoxy resin exceeded those of cement by 3.17 and 2.82 times,*** a 0.5 mm-wide crack,the injection pressure of the epoxy resin remained below 0.075 MPa,indicating superior injection and flow ***,the injection pressure of cement surged dramatically to 2.61 MPa within 5 *** breakthrough pressure of0.5 PV epoxy resin reached 7.53 MPa,decreasing the crack's perme

关键词： Sustained casing pressure Epoxy resin sealant Curing agent Viscosity reducer Mechanical properties Crack sealing

An experimental and theoretical study on photoluminescence of Ce^(3+)-doped ZnS quantum dots and their application in Aspergillus oryzae

在线全文

学校读者我要写书评

暂无评论

Journal of Rare Earths 2024年第6期42卷 1020-1028,I0001页

作者： yan Lei Guangzhi Zhang Yitong yao Gaiqin Zhu Zhong Chen Jiangrong Dan Hua Liu Shuwang Duo School of Materials and Mechanical and Electrical EngineeringJiangxi Science and Technology Normal University Nanchang330013China

ZnS and ZnS:3.125%Ce^(3+)(ZSC)quantum dots(QDs)were synthesized by a low-temperature solid-phase *** crystal structure,photoluminescence(PL)properties of ZSC QDs,and their effects on the growth and kojic acid production of Aspergillus oryzae(***)were *** is found that both QDs have a cubic blend structure with the average particle size ranging of 2.75-6.14 ***^(3+)doping not only increases the band gap of ZnS QDs from 3.43 to 3.48 eV,but also increases the PL intensity by about 2.23 times,which is due to the fact that the electron carrier concentration is improved,and then the rate of radiative recombination is *** integral emission intensity,biomass,extracellular proteins yield,and kojic acid production of *** cultured with ZSC(ZnS)QDs are about 4.31(3.23),1.61(1.20),1.12(1.09),and 2.99(1.68)times higher than that of medium without QDs,respectively.

关键词： Zns Quantum dots Doping First-principles calculations Aspergllus oryzae Rare earths

Laser Wire Additive Manufacturing of Ti-6Al-4V Alloy and Its Machine Learning Study for Parameters Optimization(Invited)

在线全文

学校读者我要写书评

暂无评论

中国激光 2024年第4期51卷 182-198页

作者： Wu Junyi Zhang Bo Wang Weihua Li Weipeng yao Xiyu Wang Dawei Xing Wei yan Ming Department of Materials Science and Engineering Southern University of Science and TechnologyShenzhen 518055GuangdongChina Songshan Lake Materials Laboratory Dongguan 523830GuangdongChina Institute of Physics Chinese Academy of SciencesBeijing 100190China Jiaxing Research Institute Southern University of Science and TechnologyShenzhen 518055GuangdongChina High Performance Computing Department National Supercomputing CenterShenzhen 518055GuangdongChina

Ti-6Al-4V is a benchmark Ti alloy. Laser wire additive manufacturing(LWAM) offers advanced manufacturing capability to the alloy for applications possibly including exploration of outer space. As a typical multiple-variable process, LWAM is complex, which, however, can be analyzed, predicated or even optimized by artificial intelligence(AI) methods such as machine learning(ML). In this study, printing parameters of the Ti-6Al-4V is firstly optimized using single-track-single-layer experiments, and then single-track-multiple-layer samples are printed, whose properties in terms of hardness and compressive strength are analyzed subsequently by both experiments and ML. The two ML approaches, artificial neural network(ANN) and support vector machine(SVM), are employed to predict the experimental results, whose coefficients of determination R2 show good values. Further optimized properties are realized by adopting genetic algorithm(GA) and simulated annealing(SA) approaches, which contribute to high mechanical properties achieved, for instance, an engineering compressive strength of about 1694 MPa. The results here indicate that important mechanical properties of the LWAM-prepared Ti alloys can be well predicted and enhanced using suitable ML approaches.

关键词： artificial printing additive