检索结果-南通市图书馆

Revisiting study on boussinesq modeling of wave transformation over various reef profiles

在线全文

学校读者我要写书评

暂无评论

Water Science and Engineering 2014年第3期7卷 306-318页

作者： Ke-zhao FANG Ji-wei YIN zhong-bo liu Jia-wen SUN Zhi-li ZOU State Key Laboratory of Coastal and Offshore Engineering Dalian University of Technology National Marine Environment Monitoring Center State Oceanic Administration Heilongjiang Province Navigation Investigation and Design Institute

To better understand the complex process of wave transformation and associated hydrodynamics over various fringing reef profiles, numerical experiments were conducted with a one-dimensional （1D） boussinesq wave model. The model is based on higher-order boussinesq equations and a higher-accuracy finite difference method. The dominant energy dissipation in the surf zone, wave breaking, and bottom friction were considered by use of the eddy viscosity concept and quadratic bottom friction law, respectively. Numerical simulation was conducted for a wide range of wave conditions and reef profiles. Good overall agreement between the computed results and the measurements shows that this model is capable of describing wave processes in the fringing reef environment. Numerical experiments were also conducted to track the source of underestimation of setup for highly nonlinear waves. Linear properties （including dispersion and shoaling） are found to contribute little to the underestimation; the low accuracy in nonlinearity and the ad hoc method for treating wave breaking may be the reason for the problem.

关键词： wave-induced setup, wave-induced setdown boussinesq model wave breaking, reef

Preparation of CIP@TiO_(2) composite with broadband electromagnetic wave absorption properties

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第1期31卷 197-205页

作者： Qiang Su Hanqun Wang Yunfei He Dongdong liu Xiaoxiao Huang bo zhong School of Materials Science and Engineering Harbin Institute of TechnologyWeihaiWeihai 264209China School of Materials Science and Engineering Harbin Institute of TechnologyHarbin 150001China

Scholars aim for the improved impedance matching (Z) of materials while maintaining their excellent wave absorption properties. Based on the hydrolysis characteristics of isopropyl titanate, a simple preparation process for the coating of carbonyl iron powder(CIP) with TiO_(2) was designed. Given the TiO2coating, the Z of the CIP@TiO_(2) composite was adjusted well by decreasing the dielectric constant. Moreover, the interfacial polarization of CIP@TiO_(2) was enhanced. Ultimately, the electromagnetic-wave (EMW) absorption property of the CIP@TiO_(2)composite was improved substantially, the minimum reflection loss reached-46.07 dB, and the effective absorption bandwidth can reach 8 GHz at the composite thickness of 1.5 mm. Moreover, compared with CIP, the oxidation resistance of CIP@TiO_(2)showed remarkable improvement. The results revealed that the oxidation starting temperature of CIP@TiO_(2) as about 400℃,whereas the uncoated CIP had an oxidation starting temperature of approximately 250℃. Moreover, the largest oxidation rate temperature of CIP@TiO_(2) increased to around 550℃. This work opens up a novel strategy for the production of high-performance EMW absorbers via structural design.

关键词： carbonyl iron@titanium dioxide electromagnetic-wave absorption impedance matching oxidation resistance

Super-high bed sintering for iron ores:behaviors,causes and solutions of horizontal segregation on strand

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第7期31卷 1590-1596页

作者： Liang-ping Xu Hui-bo liu zhong-lin Dong Qiang zhong Yu-chao Zhao Guang-hui Li School of Minerals Processing and Bioengineering Central South UniversityChangsha 410083HunanChina

Horizontal segregation has been a constraint to the development and application of super-high bed *** eliminate the horizontal segregation of super-high bed sintering,several typical sintering machines were sampled and analyzed,and theoretical calculation was made to compare the bed depth and their differences in different areas within the mixture ***,solutions were proposed and applied to a 265 m^(2) sintering *** results showed that the horizontal seg-regation of the 265 m^(2) sintering machine was dominated by particles larger than 8 mm with horizontal segregation degree of 0.48,while 360 and 550 m^(2) sintering machines were affected by 5-8 mm and 1-3 mm particles with horizontal segregation degree of 0.27 and 0.31,*** analysis indicated the different segregation distribution results from the matching of the bed depth of each area within the mixture ***,the horizontal segregation degree not larger than 0.06 was achieved by optimizing the time parameters and the division of three zones on the 265 m^(2) sintering machine.

关键词： Super-high bed sintering Horizontal segregation Feeder Particle distribution Agglomeration

Super-high bed sintering for iron ores: inhomogeneous phenomena and its mechanism during mineralizing

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第8期31卷 1850-1860页

作者： Hui-bo liu Liang-ping Xu Xi-duan Yang zhong-lin Dong Qiang zhong Guang-hui Li School of Minerals Processing and Bioengineering Central South UniversityChangsha 410083HunanChina

The inhomogeneous sinter properties in super-high bed sintering have been reported in our previous *** inves-tigate the reasons for the inhomogeneous phenomena,detailed sampling and analysis of mixed material bed and sintered bed in super-high bed sintering plant were *** results indicated that the higher porosity and thinner dendrite of silico-ferrite of calcium and aluminum in the upper layer as well as dense structure and higher secondary hematite content in the lower layer led to the heterogeneities of mechanical strength and reduction properties exceeding 20%and 10%,*** the bed top downward,the basicity of mixed material decreased from 2.13 to 1.68 because the average particle size increased from 2.65 to 4.56 *** and fuels gathered in finer particles(-3 mm)of mixed material,and the-3 mm particles of mixed material generated more liquid phase than+3 mm *** heat input of super-high sintering bed was inhomogeneous due to the heat accumulation effect and unreasonable fuel *** inhomo-geneous sintering heat condition in sintering bed resulted in the different quantities and properties of liquid *** inhomogeneous quantities and properties of liquid phase that were influenced by inhomogeneous distribution of chemical composition,particle size,and heat input led to inhomogeneous mineralizing *** mineralizing condition is the key for homogeneous super-high bed sintering.

关键词： Iron ore Super-high bed sintering Mineralization Material segregation Heat accumulation

Tracking Regulatory Mechanism of Trace Fe on Graphene Electromagnetic Wave Absorption

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano-Micro Letters 2024年第4期16卷 79-96页

作者： Kaili Zhang Yuhao liu Yanan liu Yuefeng Yan Guansheng Ma bo zhong Renchao Che Xiaoxiao Huang School of Materials Science and Engineering Harbin Institute of TechnologyHarbin 150001People’s Republic of China MIIT Key Laboratory of Advanced Structural‑Functional Integration Materials&Green Manufacturing Technology Harbin Institute of TechnologyHarbin 150001People’s Republic of China School of Materials Science and Engineering Harbin Institute of Technology at WeihaiWeihai 264209People’s Republic of China Laboratory of Advanced Materials Shanghai Key Lab of Molecular Catalysis and Innovative MaterialsFudan UniversityShanghai 200438People’s Republic of China

Polarization and conductance losses are the fundamental dielectric attenuation mechanisms for graphene-based absorbers, but it is not fully understood in revealing the loss mechanism of affect graphene itself. For the first time, the reduced graphene oxide(RGO) based absorbers are developed with regulatory absorption properties and the absorption mechanism of RGO is mainly originated from the carrier injection behavior of trace metal Fe nanosheets on graphene. Accordingly, the minimum reflection loss(RLmin) of Fe/RGO-2composite reaches-53.38 dB(2.45 mm), and the effective absorption bandwidth achieves 7.52 GHz(2.62 mm) with lower filling loading of 2 wt%. Using off-axis electron hologram testing combined with simulation calculation and carrier transport property experiments, we demonstrate here the carrier injection behavior from Fe to graphene at the interface and the induced charge accumulation and rearrangement, resulting in the increased interfacial and dipole polarization and the conductance loss. This work has confirmed that regulating the dielectric property of graphene itself by adding trace metals can not only ensure good impedance matching, but also fully exploit the dielectric loss ability of graphene at low filler content,which opens up an efficient way for designing lightweight absorbers and may be extended to other types materials.

关键词： Reduced graphene oxide Fe nanosheets Dielectric loss Electromagnetic wave absorption

Super-high bed sintering for iron ores:problems ascertainment

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第5期31卷 1063-1070页

作者： Liang-ping Xu Hui-bo liu Yu-chao Zhao Qiang zhong zhong-lin Dong Guang-hui Li Tao Jiang School of Minerals Processing and Bioengineering Central South UniversityChangsha410083HunanChina

Super-high bed sintering process is an important development direction of iron ore sintering for its lower emission and higher ***,there is a lack of deep understanding of the uneven quality of super-high bed sintering products,and the deterioration of reduction disintegration performance,the thickening of hearth layer and the reduction in energy-saving effect are perplexing enterprises and *** ascertain the problems of super-high bed sintering,ten sintering machines with the areas of 265,280,360,550 and 660 m^(2)and bed depth above 900 mm were sampled and *** results showed that problems were mainly shown in the unevenness of chemical composition,macrostructure,mechanical strength and metallurgical *** chemical composition exhibits severe segregation in both horizontal and vertical directions,with basicity segregation reaching as high as *** uneven macrostructure of sinter is reflected in a 10%difference in porosity and mechanical strength increase in 16%–19%along the vertical *** reducibility and reduction disintegration performance gradually deteriorate along the bed depth,with a difference of 10.5%in reducibility and 7.3%in RDI−0.5 mm(reduction disintegration index of sinter with size smaller than 0.5 mm).

关键词： Super-high bed sintering Uneven sinter performance Segregation Agglomeration Iron ore

Facile fabrication of graphene/g-C_(3)N_(4) for electromagnetic wave absorption

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano Research 2024年第3期17卷 1687-1698页

作者： Qiang Su Yunfei He Dongdong liu Daguang Li Long Xia Xiaoxiao Huang bo zhong School of Materials Science and Engineering Harbin Institute of Technology WeihaiWeihai 264209China Weihai Yunshan Technology Co. Ltd.Weihai 264200China State Key Laboratory on Integrated Optoelectronics College of Electronic Science&EngineeringJilin UniversityChangchun 130012China School of Materials Science and Engineering Harbin Institute of TechnologyHarbin 150001China

With the development of the miniaturization of electronic equipment and lightweight weapon equipment,there are new requirements for electromagnetic wave absorption material(EMWAM).EMWAM has outstanding electromagnetic wave absorption properties and lightweight characteristics become an important direction of *** this study,graphene/g-C_(3)N_(4)(GGCN)EMWAM was first synthesized in situ by simple heat treatment,in which the g-C_(3)N_(4) had a porous structure and dispersed on the surface of *** impedance matching of the GGCN was well adjusted by decreasing the dielectric constant and attenuation constant due to the g-C_(3)N_(4) semiconductor property and the graphite-like *** EMW loss mechanism of GGCN was also analyzed by simulating GGCN’s electric field mode distribution and resistance loss power *** analysis result shows that the distribution of g-C_(3)N_(4) among GGCN sheets can produce more polarization effects and relaxation effects by increasing the lamellar ***,the polarization loss of GGCN could be increased successfully by porous g-C_(3)N_(4).Ultimately,the EMW absorption property of GGCN is optimized significantly,and GGCN exhibits excellent EMW absorption *** the thickness is 2 mm,the effective absorption bandwidth(EAB)can reach 4.6 GHz,and when the thickness is 4.5 mm,the minimum reflection loss(RLmin)at 4.56 GHz can reach-34.69 ***,the practical application of EMWAM was studied by radar cross-section(RCS)simulation,showing that GGCN has a good application prospect.

关键词： graphene/g-C_(3)N_(4) impedance matching simulation analysis dielectric loss excellent electromagnetic wave absorption

Study on 6-DOF active vibration-isolation system of the ultra-precision turning lathe based on GA-BP-PID control for dynamic loads

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Advances in Manufacturing 2024年第1期12卷 33-60页

作者： bo Wang zhong Jiang Pei-Da Hu Department of Precision Instrument Tsinghua UniversityBeijing100084People’s Republic of China Institute of Machinery Manufacturing Technology China Academy of Engineering PhysicsMianyang621900SichuanPeople’s Republic of China

The vibration disturbance from an external environment affects the machining accuracy of ultra-precision machining *** active vibration-isolation systems(AVIS)have been developed based on static *** a vibration-isolation load changes dynamically during ultra-precision turning lathe machining,the system parameters change,and the efficiency of the active vibration-isolation system based on the traditional control strategy *** solve this problem,this paper proposes a vibration-isolation control strategy based on a genetic algorithm-back propagation neural network-PID control(GA-BP-PID),which can automatically adjust the control parameters according to the machining ***-isolation simulations and experiments based on passive vibration isolation,a PID algorithm,and the GA-BP-PID algorithm under dynamic load machining conditions were *** experimental results demonstrated that the active vibration-isolation control strategy designed in this study could effectively attenuate vibration disturbances in the external environment under dynamic load *** design is reasonable and feasible.

关键词： Ultra-precision diamond turning lathe Active vibration isolation Six degrees of freedom Dynamic load Genetic algorithm-back propagation neural network-PID(GA-BP-PID)control

Comparison of Combustion Characteristics of Tars Produced with Tobacco Stem Biomass Gasification

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Renewable Materials 2024年第1期12卷 119-129页

作者： bo Chen Mingjun Wang bo liu Chunping Lu Guohai Jia Yong Chao Chao zhong School of Mechanical Engineering Hunan Institute of EngineeringXiangtan411104China School of Automotive Engineering Xiangtan Institute of TechnologyXiangtan411100China School of Electrical and Information Engineering Hunan Institute of EngineeringXiangtan411104China China Metallurgic Jingcheng(Xiangtan)Heavy Industry Equipment Co. Ltd.Xiangtan411100China Hunan Shuanghuan Fiber Molding Machinery Co. Ltd.Xiangtan411100China

In order to study the combustion characteristics of tar in biomass gasifier inner wall and gasification gas,“tobacco stem semi-tar inside furnace”,“tobacco stem tar inside furnace”and“tobacco stem tar out-of-furnace”were subjected to thermogravimetric experiments,and the combustion characteristics and kinetic characteristics were *** result shows that“tobacco stem semi-tar inside furnace”has the highest value and“tobacco stem tar out-of-furnace”is has the lowest value on ignition characteristics,combustion characteristics and combustible stability;“tobacco stem semi-tar inside furnace”has the lowest value and“tobacco stem tar outside furnace”has the highest value on burnout characteristics;“tobacco stem tar outside furnace”has the highest value and“tobacco stem tar inside furnace”has the lowest value on integrated combustion characteristics.

关键词： Tobacco stem tar gasifier combustion characteristics