检索结果-南通市图书馆

Effects of the extrusion parameters on microstructure,texture and room temperature mechanical properties of extruded Mg-2.49Nd-1.82Gd-0.2Zn-0.2Zr alloy

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2025年第1期32卷 136-146页

作者： Chenjin Zhang Guangyu Yang Lei Xiao Zhiyong kan Jing Guo Qiang Li Wanqi Jie State Key Laboratory of Solidification Processing Northwestern Polytechnical UniversityXi’an 710072China College of Materials Science and Engineering Fuzhou UniversityFuzhou 350108China College of Chemistry and Environmental Science Qujing Normal UniversityQujing 655011China

Microstructure,texture,and mechanical properties of the extruded Mg-2.49Nd-1.82Gd-0.2Zn-0.2Zr alloy were investigated at different extrusion temperatures(260 and 320℃),extrusion ratios(10:1,15:1,and 30:1),and extrusion speeds(3 and 6 mm/s).The experimental results exhibited that the grain sizes after extrusion were much finer than that of the homogenized alloy,and the second phase showed streamline distribution along the extrusion direction(ED).With extrusion temperature increased from 260 to 320℃,the microstructure,texture,and mechanical properties of alloys changed *** dynamic recrystallization(DRX)degree and grain sizes enhanced as the extrusion ratio increased from 10:1 to 30:1,and the strength gradually decreased but elongation(EL)*** the extrusion speed increased from 3 to 6 mm/s,the grain sizes and DRX degree increased significantly,and the samples presented the typical-rare-earth(RE)*** alloy extruded at 260℃ with extrusion ratio of 10:1 and extrusion speed of 3 mm/s showed the tensile yield strength(TYS)of 213 MPa and EL of 30.6%.After quantitatively analyzing the contribution of strengthening mechanisms,it was found that the grain boundary strengthening and dislocation strengthening played major roles among strengthening *** results provide some guidelines for enlarging the industrial application of extruded Mg-RE alloy.

关键词： Mg-rare earth alloys extrusion temperature extrusion ratio extrusion speed strengthening mechanisms

Flexible Strain Sensors with Ultra‑High Sensitivity and Wide Range Enabled by Crack‑Modulated Electrical Pathways

在线全文

学校读者我要写书评

暂无评论

Nano-Micro Letters 2025年第3期17卷 246-264页

作者： Yunzhao Bai Yunlei Zhou Xuanyu Wu Mengfei Yin Liting Yin Shiyuan Qu Fan Zhang kan Li YongAn Huang State Key Laboratory of Intelligent Manufacturing Equipment and Technology Huazhong University of Science and TechnologyWuhan 430074People’s Republic of China Flexible Electronics Research Center Huazhong University of Science and TechnologyWuhan 430074People’s Republic of China Hangzhou Institute of Technology Xidian UniversityHangzhou 311200People’s Republic of China School of Mechano‑Electronic Engineering Xidian UniversityXi’an 710071People’s Republic of China Department of Aerospace and Mechanical Engineering University of Southern CaliforniaLos AngelesCA 90089USA

This study presents a breakthrough in flexible strain sensor technology with the development of an ultrahigh sensitivity and wide-range sensor,addressing the critical challenge of reconciling sensitivity with measurement *** by the structure of bamboo slips,we introduce a novel approach that utilises liquid metal to modulate the electrical pathways within a cracked platinum fabric *** resulting sensor demonstrates a gauge factor greater than 108 and a strain measurement capability exceeding 100%.The integration of patterned liquid metal enables customisable tuning of the sensor’s response,while the porous fabric structure ensures superior comfort and air permeability for the *** design not only optimises the sensor’s performance but also enhances the electrical stability that is essential for practical *** systematic investigation,we reveal the intrinsic mechanisms governing the sensor’s response,offering valuable insights for the design of wearable strain *** sensor’s exceptional performance across a spectrum of applications,from micro-strain to large-strain detection,highlights its potential for a wide range of real-world uses,demonstrating a significant advancement in the field of flexible electronics.

关键词： Flexible strain sensor Fabric Crack Response regulation Epidermal device

A Flexible Smart Healthcare Platform Conjugated with Artificial Epidermis Assembled by Three‑Dimensionally Conductive MOF Network for Gas and Pressure Sensing

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano-Micro Letters 2025年第2期17卷 601-620页

作者： Qingqing Zhou Qihang Ding Zixun Geng Chencheng Hu Long Yang Zitong kan Biao Dong Miae Won Hongwei Song Lin Xu Jong Seung Kim State Key Laboratory of Integrated Optoelectronics College of Electronic Science and EngineeringJilin UniversityChangchun 130012People’s Republic of China Department of Chemistry Korea UniversitySeoul 02841Republic of Korea TheranoChem Incorporation Seoul 02856Republic of Korea

The rising flexible and intelligent electronics greatly facilitate the noninvasive and timely tracking of physiological information in telemedicine *** building bionic-sensitive moieties is vital for designing efficient electronic skin with advanced cognitive functionalities to pluralistically capture external ***,realistic mimesis,both in the skin’s three-dimensional interlocked hierarchical structures and synchronous encoding multistimuli information capacities,remains a challenging yet vital need for simplifying the design of flexible logic ***,we construct an artificial epidermal device by in situ growing Cu_(3)(HHTP)_(2) particles onto the hollow spherical Ti_(3)C_(2)T_(x) surface,aiming to concurrently emulate the spinous and granular layers of the skin’s *** bionic Ti_(3)C_(2)T_(x)@Cu_(3)(HHTP)_(2) exhibits independent NO_(2) and pressure response,as well as novel functionalities such as acoustic signature perception and Morse code-encrypted message ***,a wearable alarming system with a mobile application terminal is self-developed by integrating the bimodular senor into flexible printed *** system can assess risk factors related with asthmatic,such as stimulation of external NO_(2) gas,abnormal expiratory behavior and exertion degrees of fingers,achieving a recognition accuracy of 97.6%as assisted by a machine learning *** work provides a feasible routine to develop intelligent multifunctional healthcare equipment for burgeoning transformative telemedicine diagnosis.

关键词： Ti_(3)C_(2)T_(x)@Cu_(3)(HHTP)_(2)composites NO_(2)/pressure flexible sensors Health-monitoring Machine learning

Dual‑Donor‑Induced Crystallinity Modulation Enables 19.23% Efficiency Organic Solar Cells

在线全文

学校读者我要写书评

暂无评论

Nano-Micro Letters 2025年第3期17卷 376-388页

作者： Anhai Liang Yuqing Sun Sein Chung Jiyeong Shin kangbo Sun Chaofeng Zhu Jingjing Zhao Zhenmin Zhao Yufei Zhong Guangye Zhang Kilwon Cho zhip.ng kan Center On Nanoenergy Research Institute of Science and Technology for Carbon Peak&NeutralitySchool of Physical Science&TechnologyGuangxi UniversityNanning 530004People’s Republic of China Department of Chemical Engineering Pohang University of Science and TechnologyPohang 37673South Korea College of New Materials and New Energies Shenzhen Technology UniversityShenzhen 518118People’s Republic of China Zhejiang Engineering Research Center for Fabrication and Application of Advanced Photovoltaic Materials School of Materials Science and EngineeringNingboTech UniversityNingbo 315100People’s Republic of China State Key Laboratory of Featured Metal Materials and Life-Cycle Safety for Composite Structures Nanning 530004People’s Republic of China

Trap-assisted charge recombination is one of the primary limitationsof restricting the performance of organic solar cells. However, effectivelyreducing the presence of traps in the photoactive layer remains ***, wide bandgap polymer donor PTzBI-dF is demonstrated as an effectivemodulator for enhancing the crystallinity of the bulk heterojunction active layerscomposed of D18 derivatives blended with Y6, leading to dense and orderedmolecular packings, and thus, improves photoluminescence quenching *** a result, the photovoltaic devices exhibit reduced trap-assisted charge recombinationlosses, achieving an optimized power conversion efficiency of over 19%.Besides the efficiency enhancement, the devices comprised of PTzBI-dF as athird component simultaneously attain decreased current leakage, improved chargecarrier mobilities, and suppressed bimolecular charge recombination, leading toreduced energy losses. The advanced crystalline structures induced by PTzBI-dFand its characteristics, such as well-aligned energy level, and complementaryabsorption spectra, are ascribed to the promising performance *** findings suggest that donor phase engineering is a feasible approach to tuning the molecular packings in the active layer, providingguidelines for designing effective morphology modulators for high-performance organic solar cells.

关键词： Trap-assisted charge recombination Photoluminescence Miscibility Current leakage Power conversion efficiency

环境分权对区域工业绿色发展影响的空间溢出效应研究

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

生态经济 2025年第1期41卷 201-209,229页

作者：王晗阚萧江苏师范大学公共管理与社会学院江苏徐州221116

在理论机制分析的基础上,基于2005—2020年我国30个省份的面板数据,采用Super-SBM模型测度了区域工业绿色发展水平,进而采用空间计量模型等方法检验了环境分权对区域工业绿色发展的影响。研究发现:(1)在考虑空间溢出效应的前提下,环境... 详细信息

在理论机制分析的基础上,基于2005—2020年我国30个省份的面板数据,采用Super-SBM模型测度了区域工业绿色发展水平,进而采用空间计量模型等方法检验了环境分权对区域工业绿色发展的影响。研究发现:(1)在考虑空间溢出效应的前提下,环境分权对区域工业绿色发展具有显著的抑制作用,但空间影响程度较为有限。使用工具变量处理内生性问题后,上述核心结论依然成立。(2)环境行政分权、环境监察分权及环境监测分权对工业绿色发展在影响方向或强度上存在显著差异。(3)进一步分析表明,财政分权、地方政府竞争程度的提升,强化了环境分权对工业绿色发展的抑制作用。(4)相比于东部地区,环境分权及其细分指标在中部和西部地区的边际效应更强;相比于2005—2012年,2013—2020年环境分权及细分指标的边际效应有所减弱。因此,建议建立跨级环境治理协作机制,强化数据透明度和公信力,明确权责匹配原则以及在环保垂管体制下细化环境分权政策。

关键词：环境分权工业绿色发展空间溢出效应区域异质性

Lessons Learned from the Tragedy during the 100 km Ultramarathon Race in Baiyin,Gansu Province on 22 May 2021

在线全文

学校读者我要写书评

暂无评论

Advances in Atmospheric Sciences 2021年第11期38卷 1803-1810页

作者： Qinghong ZHAng Chan-Pang ng kan DAI Jun XU Jian TAng Juanzhen SUN Mu MU Department of Atmospheric and Oceanic Sciences School of PhysicsPeking UniversityBeijing 100871China HIWeather International Coordination Office Chinese Academy of Meteorological SciencesBeijing 100081China China Meteorological Administration Beijing 100081China National Center for Atmospheric Science BoulderCO 80307United States Department of Atmospheric and Oceanic Sciences and Institute of Atmospheric Sciences Fudan UniversityShanghai 200438China

Twenty-one runners died of hypothermia during the 100 km Ultramarathon Mountain race in Baiyin,Gansu Province on 22 May *** hypothermia was caused by a combination of low temperatures,precipitation,and high winds associated with a typical large-scale cold front passing by the race site that *** on historical hourly records of 13 meteorological surface stations over the past six years,temperature(3.0°C)and apparent temperature(−5.1°C)at 1200 LST as well as gust wind speed(11.2 m s^(−1))at 1100 LST on the day of the tragedy were found to be within the top or bottom 5th percentile for the month of *** precipitation was only moderate at this time,but when temperature lower than 3.0°C,gust wind speed greater than 11.2 m s^(−1),and precipitation greater than 0.1 mm for any adjacent three hours were combined together,1200 LST 22 May fell within the top 0.1%of *** European Centre for Medium-range Weather Forecasting model produced reasonably good forecasts of the low temperature and high wind one day and seven days before the event,*** on this study,lessons that can be learned from this tragedy are summarized from an academic perspective:Hazard and impact forecasts of high-impact weather events should be developed to increase the value of weather *** forecasts should be issued by government weather agencies and communicated well to the *** more importantly,knowledge of how to evaluate the impact of weather should be delivered to the public in the *** would like to extend our deepest condolences to the families and loved ones of the people who lost their lives in this tragedy,including 21 runners and one *** our efforts honor those who lost their lives by highlighting the value of weather forecasting and calling for greater action in the future.

关键词： low temperature high wind precipitation value of weather forecast

股骨假体对位不齐对骨质疏松患者膝关节内侧单髁置换后外侧间室结构应力的影响

在线全文

学校读者我要写书评

暂无评论

中国组织工程研究 2025年第15期29卷 3153-3158页

作者：刘蒙飞孙荣鑫姜侃新疆医科大学第六附属医院新疆维吾尔自治区乌鲁木齐市830000

背景:假体对位不齐和患者骨质情况是影响单髁置换预后的重要因素,内侧单髁置换后外侧间室骨关节炎进展是导致其高翻修率的主要并发症。因此,这将成为今后的研究热点。目的:分析不同股骨假体倾斜角度对正常骨质和骨质疏松患者内侧单髁置... 详细信息

背景:假体对位不齐和患者骨质情况是影响单髁置换预后的重要因素,内侧单髁置换后外侧间室骨关节炎进展是导致其高翻修率的主要并发症。因此,这将成为今后的研究热点。目的:分析不同股骨假体倾斜角度对正常骨质和骨质疏松患者内侧单髁置换后外侧间室结构应力的影响,并探讨骨质疏松与术后外侧间室骨关节炎的相关性。方法:使用经验证的膝关节有限元模型,建立正常骨质(M1)和骨质疏松(M2)单髁置换模型,并分别建立股骨假体倾斜模型(正常骨质组:内倾3°,6°,9°,12°、标准位置0°、外倾3°,6°,9°,12°;骨质疏松组:内倾3°,6°,9°,12°、标准位置0°、外倾3°,6°,9°,12°),共计18种工况。评估不同股骨假体倾斜角度对外侧间室半月板、胫骨软骨和股骨软骨的应力大小和分布的影响。结果与结论:①两组模型外侧间室半月板表面和胫骨软骨表面的高应力值随假体内倾角度的增加而增加,随假体外倾角度的增加而减小,相同工况下骨质疏松组半月板表面的峰值应力大于正常骨质组,但骨质疏松组胫骨软骨表面的峰值应力却小于正常骨质组;②两组模型外侧间室股骨软骨的高应力值随假体内倾和外倾角度的增加而增加,相同工况下骨质疏松组股骨软骨的峰值应力大于正常骨质组;③提示固定平台股骨假体内倾时,正常骨质和骨质疏松膝关节内侧单髁置换后外侧间室结构的应力均将增加,骨质疏松膝关节外侧间室应力增加更为明显;所以单髁置换过程中应特别注意假体安放位置,尽量避免内倾和外倾;同时,研究结果证实了骨质疏松可能会加重内侧单髁置换后外侧间室骨关节炎的进展。

关键词：膝骨关节炎骨质疏松单髁置换股骨组件生物力学

Locally repairable codes from combinatorial designs

在线全文

学校读者我要写书评

暂无评论

Science China(Information Sciences) 2020年第2期63卷 174-188页

作者： Yu ZHAng Haibin kan Shanghai Key Laboratory of Intelligent Information Processing School of Computer ScienceFudan University Fudan-Zhongan Joint Laboratory of Blockchain and Information Security Shanghai Engineering Research Center of Blockchain Shanghai Institute for Advanced Communication and Data Science

Locally repairable codes（LRCs） were proposed to reduce the repair degree in distributed storage systems. In particular, LRCs with availability are highly desirable for distributed storage systems, since this kind of codes provide the mechanism of local repair for code symbols and parallel reading of hot *** this paper, we propose four types of（n, k, r, t）;LRCs from combinatorial designs. We introduce several constructions of LRCs with strict availability and some constructions of distance-optimal LRCs with information-symbol locality. Most of our constructions in this paper are over F;, i.e., they are suitable for implementation.

关键词： locally repairable codes erasure codes combinatorial designs distributed storage systems codes with availability

LEO satellite clock analysis and prediction for positioning applications

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Geo-Spatial Information Science 2022年第1期25卷 14-33页

作者： kan Wang Ahmed El-Mowafy School of Earth and Planetary Sciences Curtin UniversityPerthAustralia

The positioning service aided by low Earth orbit(LEO)mega-constellations has become a hot topic in recent *** achieve precise positioning,accuracy of the LEO clocks is important for single-receiver *** bridge the gap between the applicable time of the clock products and the time of positioning,the precise LEO clocks need to be predicted over a certain period depending on the sampling interval of the clock *** study discusses the prediction errors for periods from 10 s to 1 h for two typical LEO clock types,*** ultra-stable oscillator(USO)and the oven-controlled crystal oscillator(OCXO).The prediction is based on GNSS-determined precise clock estimates,where the clock stability is related to the GNSS estimation errors,the behaviors of the oscillators themselves,the systematic effects related to the environment and the relativistic effects,and the stability of the time *** on real data analysis,LEO clocks of the two different types are simulated under different conditions,and a prediction model considering the systematic effects is *** to a simple polynomial fitting model usually applied,the proposed model can significantly reduce the prediction errors,*** about 40%-70%in simulations and about 5%-30%for real data containing different miss-modeled *** both clock types,short-term prediction of 1 min would result in a root mean square error(RMSE)of a few centimeters when using a very stable time *** RMSE amounts to about 0.1 m,when a typical real-time time reference of the national center for space studies(CNES)real-time clocks was *** long-term prediction of 1 h,the RMSE could range from below 1 m to a few meters for the USOs,depending on the complexity of the miss-modeled *** OCXOs,the 1 h prediction could lead to larger errors with an RMSE of about 10 m.

关键词： LEO clock prediction USO OCXO relativistic effects