检索结果-南通市图书馆

A New Method for the Aging Evaluation of Oil-Paper Insulation Using η-Butanol and Methanol

CSEE Journal of Power and Energy Systems 2024年第2期10卷 717-726页

作者： Jianyi Wang Yuanxiang Zhou Jun Liu Zhaowei Wang Song bai Jiayu Lu Department of High Voltage China Electric Power Research InstituteBeijing 100192China State Key Laboratory of Power Grid Environmental Protection Beijing 100192China Electrical Engineering Department Tsinghua UniversityBeijing 100084China Solar Storage Division of State Key Lab of Power System and Generation Equipment School of Electrical EngineeringXinjiang UniversityUrumqi 830047China State Grid Wuwei Electric Power Supply Company Wuwei 733000China

To improve the accuracy and efficiency of the aging life prediction and assessment of transformer oil-paper insulation,and to make up for the deficiencies of traditional characterizers,such as 2-furfural,carbon monoxide,and carbon dioxide,a method for the simultaneous determination of methanol,ethanol,n−propanol,and η-butanol in oil with a single injection is established by headspace-gas chromatography-mass *** measured results show that the determination limits of the four alcohol characterizers can be controlled to 10μg/kg *** on this method,the change patterns of the above four alcohols with thermal aging time and degree of polymerization are obtained through thermal aging experimental ***,η-propanol,and η-butanol in oil indicate nearly linear correlations with thermal aging time and degree of polymerization,similar to that of *** analyzing 52 sets of measured data of 500 kV EHV transformers in operation,η-butanol is found to have excellent performance,and a new method to evaluate the aging state of oil-paper insulation employing η-butanol and methanol is proposed along with the aging attention value *** measured data of 500 kV EHV transformers in operation indicate that the combination of η-butanol and methanol as the preferred characterizers can effectively compensate for the shortcoming of traditional characterizers in the early stages of aging,and the feasibility of the method is *** possible pathways for the generation of η-butanol by cellulose cleavage during the aging of oil-paper are proposed from the chemical structure of cellulose.

关键词： Aging characterization determination method methanol η-butanol oil-paper insulation 500 kV transformers

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Flower-like tin oxide membranes with robust three-dimensional channels for efficient removal of iron ions from hydrogen peroxide

引用

Chinese Journal of Chemical Engineering 2024年第1期65卷 1-7页

作者： Risheng Shen Shilong Li Yuqing Sun Yuan bai Jian Lu Wenheng Jing State Key Laboratory of Materials-Oriented Chemical Engineering Nanjing Tech UniversityNanjing 210009China National Energy Group Science and Technology Research Institute Co. Ltd.Nanjing 210023China

Membrane technology has become the mainstream process for the production of electronic grade hydrogen peroxide(H_(2)O_(2)).But due to the oxidation degradation of the organic membranes(***)by the strong oxidative radicals(e.g.OH)generated via the activation of H_(2)O_(2)by iron ions(Fe^(3+)),the short effective lifetime of membranes remains a *** nano tin oxide(SnO_(2))has great potential for the removal of Fe^(3+)in strongly oxidative H_(2)O_(2)because of its ability to stabilize H2O_(2)and preferentially adsorb Fe^(3+).Herein,we have designed for the first time a flower-like robust SnO_(2)membrane on the ceramic support by in situ template-free one-step hydrothermal *** three-dimensional loose pore structure in the membrane built by interlacing SnO_(2)nanosheets endows the SnO_(2)membrane with a high specific surface area and abundant adsorption sites(AOH).Based on the coordination complexation and electrostatic attraction between the SnO_(2)surface and Fe^(3+),the membrane shows a high Fe3+removal efficiency(83%)and permeability(24 L·m^(-2)·h^(-1)·MPa^(-1))in H_(2)O_(2).This study provides an innovative and simple approach to designing robust SnO_(2)membranes for highly efficient removal of Fe^(3+)in harsh environments,such as strong oxidation conditions.

关键词： Hydrogen peroxide SnO_(2)membrane Adsorption Hydrothermal

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Flow characteristics of radial inflow in impeller rear cavity with baffle plate

引用

Chinese Journal of Aeronautics 2024年第2期37卷 270-282页

作者： Yang bai Xiang LUO Dongdong LIU Zeyu WU Xiaoqiang ZHANG Sipeng WANG Research Institute of Aero-Engine Beihang UniversityBeijing 100191China National Key Laboratory of Science and Technology on Aero-Engine Aero-Thermodynamics Beihang UniversityBeijing 100191China School of Energy and Power Engineering Beihang UniversityBeijing 100191China

The research purpose of this paper is to explore the influence of the baffle plate on the airflow in the rear cavity of the centrifugal impeller and optimize the performance of the secondary air system’s air bleed *** this paper,a comprehensive experimental study was carried out on the flow characteristics in the impeller rear cavity with baffle *** windage torque,flow structure and pressure drop between inlet and outlet were measured *** experiment was carried out with the condition that the range of rotational Reynolds number was from 8.33×10^(5)to 22.2×10^(5)and the range of mass flow rate coefficient was from 0.92×10^(4)to 2.92×10^(4).The results show that the static cavity and the narrow stator-rotor cavity formed by the baffle plate effectively suppress the overall swirl coefficient in the ***,the static pressure and total pressure drop in the rotor-stator cavity were *** influence of the baffle plate on the windage torque of the rotary disk is related to the turbulence *** large turbulence parameters,the windage torque would be reduced with baffle plate,while under small turbulence parameters,the baffle plate would increase with baffle *** general,the baffle plate can improve the flow capacity and optimize the bleed air performance with proper structure and operation conditions.

关键词： Impeller rear cavity Baffle plate Flow structure Windage torque Pressure drop

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Investigations of the mechanical response of dummy HTPB propellant grain under ultrahigh acceleration overload conditions using onboard flight-test measurements

引用

Defence Technology（防务技术） 2024年第2期32卷 473-484页

作者： Yiming Zhang Ningfei Wang Weihua Ma Ran Wang Long bai Yi Wu School of Aerospace Engineering Beijing Institute of TechnologyBeijing 100081China Beijing System Design Institute of Electro-mechanic Engineering Beijing 100854China Xi'an Changfeng Research Institute of Mechanism and Electricity Xi'an 710065China

In this paper,to study the mechanical responses of a solid propellant subjected to ultrahigh acceleration overload during the gun-launch process,specifically designed projectile flight tests with an onboard measurement system were *** projectiles containing dummy HTPB propellant grains were successfully recovered after the flight tests with an ultrahigh acceleration overload value of 8100 *** onboard-measured time-resolved axial displacement,contact stress and overload values were successfully obtained and *** compression tests of the dummy HTPB propellant used in the gunlaunched tests were carried out at low and intermediate strain rates to characterize the propellant's dynamic properties.A linear viscoelastic constitutive model was employed and applied in finite-element simulations of the projectile-launching *** the launch process,the dummy propellant grain exhibited large deformation due to the high acceleration overload,possibly leading to friction between the motor case and propellant *** calculated contact stress showed good agreement with the experimental results,though discrepancies in the overall displacement of the dummy propellant grain were *** dynamic mechanical response process of the dummy propellant grain was analysed in *** results can be used to estimate the structural integrity of the analysed dummy propellant grain during the gun-launch process.

关键词： Gun-launched flight test Dummy HTPB propellant Onboard measurements Utrahigh overload Mechanical response

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

A low-noise,high-gain,and large-dynamic-range photodetector based on a JFET and a charge amplifier

引用

Frontiers of Information Technology & Electronic Engineering 2024年第2期25卷 316-322页

作者： Jinrong WANG Shuang'e WU Chengdong MI Yaner QIU Xin'ai bai Department of Physics Lyuliang UniversityLvliang033001China Guangdong Provincial Key Laboratory of Fiber Laser Materials and Applied Techniques South China University of TechnologyGuangzhou510640China

We demonstrate a low-noise,high-gain,and large-dynamic-range photodetector(PD)based on a junction field-effect transistor(JFET)and a charge amplifier for the measurement of quantum noise in Bell-state detection(BSD).Particular photodiode junction capacitance allows the silicon N-channel JFET 2sk152 to be matched to the noise requirement for charge amplifier *** electronic noise of the PD is effectively suppressed and the signal-to-noise ratio(SNR)is up to 15 dB at the analysis frequency of 2.75 MHz for a coherent laser power of 50.08µ*** combining of the inductor and capacitance,the alternating current(AC)and direct current(DC)branches of the PD can operate linearly in a dynamic range from 25.06µW to 17.50 *** PD can completely meet the requirements of SNR and dynamic range for BSD in quantum optics experiments.

关键词： Quantum noise Bell-state detection(BSD) Photodetector(PD) Junction field-effect transistor(JFET) Charge amplifier

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

不同年级本科护生营养知识知晓程度现状调查

引用

赤峰学院学报（自然科学版） 2023年第7期39卷 38-44页

作者：刘彦淑白志刚内蒙古医科大学护理学院内蒙古呼和浩特010059 大连医科大学护理学院辽宁大连116000

目的:调查了解护理学专业本科生对营养知识的掌握程度,分析不同年级本科护生对营养知识是否存在差异,为本科护生对营养知识的学习提供现实依据。方法:采用问卷调查法,随机抽调内蒙古医科大学2017-2020级本科护生共200名。依据自行设计... 详细信息

目的:调查了解护理学专业本科生对营养知识的掌握程度,分析不同年级本科护生对营养知识是否存在差异,为本科护生对营养知识的学习提供现实依据。方法:采用问卷调查法,随机抽调内蒙古医科大学2017-2020级本科护生共200名。依据自行设计的《营养知识现状调查》问卷进行调查分析,将营养知识进行量化计分。结果:200名本科护生的营养知识的平均分是(15.550±4.509)分,满分30分。2017级本科护生平均得分是(15.96±5.09);2018级本科护生平均得分为(15.64±4.48);2019级本科护生平均得分为(15.30±3.84);2020级本科护生平均得分为(15.30±3.64)。不同年级本科护生的得分情况无显著差异(P>0.05)。结论:本科护生营养知识的整体水平需要进一步提高,高校需重视对本科护生的营养知识教育,建议增加临床营养学相关的课程,提升本科护生的营养知识水平。

关键词：本科护生营养知晓程度

来源：

维普期刊数据库博看期刊

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Optimized Mask-RCNN model for particle chain segmentation based on improved online ferrograph sensor

引用

Friction 2024年第6期12卷 1194-1213页

作者： Shuo WANG Miao WAN Tonghai WU Zichen bai Kunpeng WANG Key Laboratory of Education Ministry for Modern Design and Rotor-Bearing System Xi’an Jiaotong UniversityXi’an 710049China

Ferrograph-based wear debris analysis(WDA)provides significant information for wear fault analysis of mechanical *** decades of offline application,this conventional technology is being driven by the online ferrograph sensor for real-time wear state ***,online ferrography has been greatly limited by the low imaging quality and segmentation accuracy of particle chains when analyzing degraded lubricant oils in practical *** address this issue,an integrated optimization method is developed that focuses on two aspects:the structural re-design of the online ferrograph sensor and the intelligent segmentation of particle *** enhancing the imaging quality of wear particles,the magnetic pole of the online ferrograph sensor is optimized to enable the imaging system directly observe wear particles without penetrating ***,a light source simulation model is established based on the light intensity distribution theory,and the LED installation parameters are determined for particle illumination uniformity in the online ferrograph *** this basis,a Mask-RCNN-based segmentation model of particle chains is constructed by specifically establishing the region of interest(ROI)generation layer and the ROI align layer for the irregular particle *** these measures,a new online ferrograph sensor is designed to enhance the image acquisition and information extraction of wear *** verification,the developed sensor is tested to collect particle images from different degraded oils,and the images are further handled with the Mask-RCNN-based model for particle feature *** results reveal that the optimized online ferrography can capture clear particle images even in highly-degraded lubricant oils,and the illumination uniformity reaches 90%in its imaging *** importantly,the statistical accuracy of wear particles has been improved from 67.2%to 94.1%.

关键词： wear particle analysis online ferrography particle image acquisition particle chain segmentation

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Crack identification in concrete, using digital image correlation and neural network

引用

Frontiers of Structural and Civil Engineering 2024年第4期18卷 536-550页

作者： Jingyi WANG Dong LEI Kaiyang ZHOU Jintao HE Feipeng ZHU Pengxiang bai College of Mechanics and Materials Hohai UniversityNanjing 211100China

In engineering applications,concrete crack monitoring is very *** methods are of low efficiency,low accuracy,have poor timeliness,and are applicable in only a limited number of ***,more comprehensive detection of concrete damage under different scenarios is of high value for practical engineering *** image correlation(DIC)technology can provide a large amount of experimental data,and neural network(NN)can process very rich ***,NN,including convolutional neural networks(CNN)and back propagation neural networks(BP),can be combined with DIC technology to analyze experimental data of three-point bending of plain concrete and four-point bending of reinforced *** addition,strain parameters can be used for training,and displacement parameters can be added for comprehensive *** data obtained by DIC technology are grouped for training,and the recognition results of NN show that the combination of strain and displacement parameters,i.e.,the response of specimen surface and whole body,can make results more objective and *** identification results obtained by CNN and BP show that these technologies can accurately identify *** identification results for reinforced concrete specimens are less affected by noise than those of plain concrete *** is more convenient because it can identify some features directly from images,recognizing the cracks formed by macro *** can issue early warning of the microscopic cracks,but it requires a large amount of data and *** can be seen that CNN is more intuitive and efficient in image processing,and is suitable when low accuracy is adequate,while BP is suitable for occasions with greater accuracy *** two tools have advantages in different situations,and together they can play an important role in engineering monitoring.

关键词： digital image correlation convolutional neural network back propagation neural neural network damage detection concrete

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Broadband absorption performance of 3D-printed polyetheretherketone-based electromagnetic wave-absorbing composites

引用

Chinese Journal of Aeronautics 2024年第8期37卷 547-558页

作者： Lin bai Nan CHANG Meiying ZHAO Chi HOU Yi CAO Dichen LI School of Aeronautics Northwestern Polytechnical UniversityXi’an 710072China Chengdu Aircraft Design and Research Institute Chengdu 610091China Xi’an Key Laboratory of Advanced Structure Design and Application of Aircraft Northwestern Polytechnical UniversityXi’an 710072China State Key Laboratory for Manufacturing System Engineering Xi’an Jiaotong UniversityXi’an 710054China

The rapid development of additive manufacturing technology has offered a new avenue for designing and fabricating high wave-absorbing meta *** this study,the mechanical properties and broadband absorption performance of Poly-Ether-Ether-Ketone(PEEK)–based electromagnetic wave–absorbing composite materials was *** high-performance polymer PEEK was used as the matrix,and the materials with electromagnetic wave loss,such as reduced graphene oxide,Carbonyl Iron(CI),and Flake CI(FCI),were used as *** on the theory of impedance matching,a wave-absorbing structure with a gradual impedance gradient was designed and *** test results showed that at the 2.0–18.0 GHz frequency band,the coverage rate of the effective absorption bandwidth was up to 72.0%,the average optimal reflectivity was–18.09 dB,and the wide-angle absorption range was 0°–30°.The advantages of additive manufacturing technology in designing and fabricating wave-absorbing structures are presented,demonstrating that the technology is an effective method for creating broadband absorbing structures.

关键词： Absorption performance Additive manufacturing Electromagnetic absorption PEEK composite materials Gradual structure Broadband absorption

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

The Capital Market Reaction and the Influencing Mechanism of the Establishment of the Data Basic Institutional System

引用

Social Sciences in China 2024年第1期45卷 134-156页

作者： Liu bai Zhang Ailian School of Business and Management Jilin University

This study uses a sample of A-share listed companies to investigate the impact of China's Data Basic Institutional System on capital market reactions and the mechanism by which it exerts *** findings reveal that within a 5-day period before and after the policy announcement,listed companies with high data resources experience a significantly higher abnormal return compared to those with low data ***,this difference becomes more pronounced as enterprise technology intensity ***,the policy enhances the capital market's perception of the value of data resources and its potential for generating multiplier *** tests confirm that post-implementation of the policy,the capital market reevaluates the long-term value of enterprises associated with data *** comprehensive examination contributes empirical evidence to support academic research,inform policy formulation,and guide strategic planning in relevantindustries.

关键词： data resources technology intensity market value event study abnormal return

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：