检索结果-南通市图书馆

Reynolds-number scaling analysis on lift generation of a flapping and passive rotating wing with an inhomogeneous mass distribution

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Aeronautics 2024年第2期37卷 259-269页

作者： Suyang QIN Haotian HANG Yang XIANG hong liu J.C.Wu center for aerodynamics school of aeronautics and astronauticsshanghai jiao tong universityshanghai 200240china

Insects usually fly by passively rotating wings,which has been applied to the design of flapping-wing Micro-Air Vehicles(MAVs)to reduce mechanical *** this paper,a robotic passive rotating-wing model is designed to investigate wing kinematics and lift generation,which are measured by a high-speed camera and a force transducer,*** addition,flow fields are measured using the Particle Image Velocimetry(PIV).Experimental results demonstrate that passive rotating motion has a coordinative relationship with actively stroking *** the stroke amplitude or frequency increases,the rotating amplitude is *** characterize the active stroking motion,a driving Reynolds number Redrivingis defined,which varies from 68 to 366 in this *** the gravity center of the wing towards trailing ed ge induces the increase of additional torque M,which decreases the wing rotating amplitude and promotes the advance of wing *** find that the timing of wing rotation is gradually delayed and the mean lift coefficient C^(-)_(L)monotonously decreases as *** increasing the additional torque M,C^(-)_(L)is slightly improved and approaches to the lift coefficient of a real fruit fly at driving Re approximately equal to *** instantaneous lifts combined with the vortical structures further demonstrate that the lift generation associated with wing rotation is mainly attributed to the growth of the LeadingEdge Vortex(LEV)and the passive wake capture *** wake capture is influenced by LEV,reversal stroke motion and wing additional torque together,which can only maintain the lift at a high level for a considerable *** high-lift generation mechanisms of flapping and passive rotating flight could shed light on the simplified design of MAVs and the improvement of their aerodynamic performance.

关键词： Flapping flight Unsteady lift Passive rotation Vortex flow Leading-edge vortex

Application of Cone-beam Computed Tomography in Interventional Therapies for Liver Malignancy:A Consensus Statement by the Chinese College of Interventionalists

在线全文

学校读者我要写书评

暂无评论

Journal of Clinical and Translational Hepatology 2024年第10期12卷 886-891页

作者： Bin-Yan Zhong Zhong-zhi Jia Wen Zhang Chang liu Shi-hong Ying zhi-Ping Yan Cai-Fang Ni Clinical Guidelines Committee of Chinese College of Interventionalists Department of Interventional Radiology The First Affiliated Hospital of Soochow UniversitySuzhouJiangsuChina Department of Interventional and Vascular Surgery The Affiliated Changzhou Second People’s Hospital of Nanjing Medical UniversityChangzhouJiangsuChina Department of Interventional Radiology Zhongshan HospitalFudan University Shanghai Institution of Medical ImagingFudan UniversityShanghaiChina Division of Liver Department of General SurgeryWest China HospitalSichuan UniversityChengduSichuanChina Department of Minimal Invasive Surgery Shangjin Nanfu HospitalChengduSichuanChina Department of Radiology First Affiliated HospitalZhejiang University School of MedicineHangzhouZhejiangChina 不详

Despite its crucial role in interventional therapies for liver malignancy,cone-beam computed tomography(CBCT)has not yet been fully integrated into clinical practice due to several complicating factors,including nonstandardized operations and limited recognition of CBCT among interventional *** response,the Chinese College of Interventionalists has released a consensus statement aimed at standardizing and promoting the application of CBCT in the interventional therapies for liver *** statement summarizes CBCT scanning techniques,and operational standards,and highlights its potential applications in clinical practice.

关键词： Cone-beam computed tomography Interventional radiology Liver malignancy Consensus statement Chemoembolization Ablation

Experimental investigation on fluid-induced slip behavior of fault filled with fault gouge

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Rock Mechanics and Geotechnical Engineering 2024年第9期16卷 3661-3672页

作者： Yongshui Kang zhi Geng Bin liu Youqi Huang State Key Laboratory of Geomechanics and Geotechnical Engineering Institute of Rock and Soil MechanicsChinese Academy of SciencesWuhan430071China University of Chinese Academy of Sciences Beijing100049China

Fault zones are usually filled with fault gouge and accompanied by fault *** coupled effect of fault gouge and water significantly impacts the slip behavior of the fault,which may weaken the fault structure and further induce rupture propagation and *** this study,we carried out a laboratory experiment to investigate the fluid-induced slip behavior of fault filled with *** friction evolution characteristic associated with fluid pressure and effective stress was investigated during the slip *** addition,the role transformation process of the gouge on the slip behavior of fault was *** experimental result indicates that the friction on the filled fault surface is significantly affected by fault *** rupture of the gouge promotes fault slip and the fluid pressure plays a vital role in the initiation of fault *** fault gouge enhances the shearing strength of the fault and acts as a barrier before the initial slip under fluid ***,the fault gouge would accelerate the fault slip and transform into lubricant after the initial slip.

关键词： Fault gouge Fluid Slip behavior Friction Shear strength

Elevated nitrogen and co-evolution history with competitors shape the invasion process of Galinsoga quadriradiata

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Plant Ecology 2024年第4期17卷 9-22页

作者： Wen-Gang Zhang Xing-Jiang Song Laís Petri Gang liu Xiao-Yan Chen Rui-Ling liu Fang-Fang Huang Jia-Bin Zou zhi-hong Zhu College of Life Sciences Shaanxi Normal UniversityXi’an 710119China School for Environment and Sustainability University of MichiganAnn ArborMI 48109USA Research Center for UAV Remote Sensing Shaanxi Normal UniversityXi’an 710119China Changqing Teaching&Research Base of Ecology Shaanxi Normal UniversityXi’an 710119China Guangdong Provincial Key Laboratory of Silviculture Protection and UtilizationGuangdong Academy of ForestryGuangzhou 510520China

Invasive plants usually experience population differentiation as they expand from their initial invasive range to the ***,invasive plants usually encounter competitors which shared different co-evolutionary histories with *** factors may lead to varying responses of invasive plant populations to elevated nitrogen deposition during ***,this issue has received limited attention in prior *** address these challenges,we conducted a greenhouse experiment to investigate how population differentiation of Galinsoga quadriradiata interacts with the presence of various competitors in response to increased nitrogen *** types(new or old that shared short or long co-evolutionary history with the invader,respectively)were set to compete with the invasive central and edge populations under different nitrogen addition *** from the central population of ***,originating from the initial invasion range,showed greater total mass,reproduction and interspecific competitiveness compared with the edge *** addition improved growth and reproductive performance in both populations,and the central population had a stronger response compared with the edge *** performance of *** was inhibited more effectively by old competitors than new *** results indicate that population differentiation occurs in terms of growth and competitiveness during the range expansion of ***,with the central population exhibiting superior ***-evolutionary history with competitors is considered unfavorable for invasive plants in this *** results highlight the combined effects of population differentiation in invasive species and their co-evolution history with competitors in the context of global change factors.

关键词： Galinsoga quadriradiata central population edge population interspecific competition population differentiation elevated nitrogen

Magnetic emission intensity enhancement for amorphous alloys by constructing a multi-phase structure withα-Fe nanocrystals

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano Research 2024年第7期17卷 6630-6637页

作者： Ke liu zhi Qin Jie Shen zhi Cheng Shiyue You Liang Ma Jing Zhou Wen Chen State Key Laboratory of Advanced Technology for Materials Synthesis and Processing School of Materials Science and EngineeringWuhan University of TechnologyWuhan 430070China Sanya Science and Education Innovation Park Wuhan University of TechnologySanya 572024China Hubei Longzhong Laboratory Wuhan University of Technology Xiangyang Demonstration ZoneXiangyang 441000China

The perturbation in the magnetic field generated by the rotation or oscillation of magnetic domains in magnetic materials can emit low-frequency electromagnetic waves,which are expected to be used in low-frequency ***,the magnetic emission intensity,defined by the perturbation ability,of current commercially applied amorphous alloys,such as Metglas,cannot meet the application requirements for low-frequency antennas due to the domain motion energy ***,a multi-phase Metglas amorphous alloy was constructed by incorporatingα-Fe nanocrystals using rapid annealing to manipulate the domain *** was found that 3.89 times higher magnetic emission intensity is obtained compared to the pristine due to the synergism of the deformation and displacement ***,the low-frequency magnetic emission performance verification was carried out by preparing magnetoelectric composites as the antenna vibrator by assembling the alloy and macro piezoelectric fiber composites(MFC).Enhancements of magnetic emission intensity are found at 93.3%and 49.2%at the first and second harmonic frequencies compared with the unmodified alloy ***,the approach leads to the development of high-performance communication with a novel standard for evaluation.

关键词： multi-phase amorphous alloys magnetic emission intensity enhancing mechanism magnetic domain pinning theory Jiles-Atherton model analysis

Defects in the grain interiors of 3 mol%yttria-stabilized tetragonal zirconia polycrystal ceramics with 0.25 wt%alumina

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Advanced Ceramics 2024年第4期13卷 469-477页

作者： Yan Xiong Lian Luo Yao Cheng zhi liu Qi liu Weimin Wang Wei Ji School of Materials&Chemical Engineering Hubei Province Key Laboratory of Green Materials for Light IndustryHubei University of TechnologyWuhan 430068China Fujian Institute of Research on the Structure of Mater Chinese Academy of SciencesFuzhou 350002China Jiangxi Provincial Engineering Research Center for Multifunction Zirconia Materials Jiangxi Size Materials Co.Ltd.Jiujiang 332500China State Key Laboratory of Advance Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China

The presence of high-density defects is rarely observed in bulk 3 mol%yttria-stabilized tetragonal zirconia polycrystal(3Y-TZP)ceramics obtained through conventional pressureless *** the present work,fine-grained dense 147 nm 3Y-TZP ceramics were prepared by pressureless sintering of commercial 0.25 wt%alumina-doped zirconia powders at 1300℃.A novel discovery was reported in which large amounts of defects were present in the grain interiors of the *** phenomenon was further examined using three types of powder samples,and the reasons for defect formation were investigated by microstructural characterization using high-resolution transmission electron microscopy(HRTEM)analysis and Rietveld *** results confirmed the essential dependence of the defect formation on the alumina *** authors attributed the defect formation to the significant difference in ionic radii of the solvent and solute during the dissolution of alumina into the zirconia *** sintering kinetics were proposed to be enhanced by the presence of substantial defects,which consequently favored the low-temperature sintering of the alumina-doped zirconia ceramics.

关键词： 3 mol%yttria-stabilized tetragonal zirconia polycrystal(3Y-TzP)ceramics alumina addition microstructure defect

Asperuloside Promotes Apoptosis of Cervical Cancer Cells through Endoplasmic Reticulum Stress-Mitochondrial Pathway

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of Integrative Medicine 2024年第1期30卷 34-41页

作者： QI zhi-min WANG Xia liu Xia ZHAO Juan Medical Examination Center Hebei Province Hospital of Chinese MedicineShijiazhuang(050011)China Department of Gynaecology and Obstetrics Hebei Province Hospital of Chinese MedicineShijiazhuang(050011)China Experimental Center for Teaching Hebei Medical UniversityShijiazhuang(050017)China

Objective: To investigate the effects of asperuloside on cervical cancer based on endoplasmic reticulum(ER) stress and mitochondrial pathway. Methods: Different doses(12.5–800 μg/mL) of asperuloside were used to treat cervical cancer cell lines Hela and CaSki to calculate the half maximal inhibitory concentration(IC_(50)) of asperuloside. The cell proliferation was analyzed by clone formation assay. Cell apoptosis, intracellular reactive oxygen species(ROS) and mitochondrial membrane potential were determined by flow cytometry. The protein expressions of cleaved-caspase-3, Bcl-2, Bax, Cyt-c, cleaved-caspase-4 and glucose-regulated protein 78(GRP78) were analyzed by Western blot. And the inhibitor of ER stress, 4-phenyl butyric acid(4-PBA) was used to treat cervical cancer cells to further verify the role of ER stress in the apoptosis of cervical cancer cells induced by asperuloside. Results: Asperuloside of 325, 650, and 1300 μg/mL significantly inhibited the proliferation and promoted apoptosis of Hela and CaSki cells(P<0.01). All doses of asperuloside significantly increased intracellular ROS levels, reduced mitochondrial membrane potential, significantly reduced Bcl-2 protein expression level, and increased Bax, Cyt-c, GRP78 and cleaved-caspase-4 expressions(P<0.01). In addition, 10 mmol/L 4-PBA treatment significantly promoted cell proliferation and reduced apoptosis(P<0.05), and 650 μg/mL asperuloside could reverse 4-PBA-induced increased cell proliferation, decreased apoptosis and cleaved-caspase-3,-4 and GRP78 protein expressions(P<0.05). Conclusion: Our study revealed the role of asperuloside in cervical cancer, suggesting that asperuloside promotes apoptosis of cervical cancer cells through ER stress-mitochondrial pathway.

关键词： asperuloside Chinese medicine cervical cancer endoplasmic reticulum stress mitochondrial damage apoptosis

Microstructures and mechanical properties of laser-directed energy deposited CrCoNi medium-entropy alloy

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2024年第7期43卷 3286-3300页

作者： Wen-Jie Zhao Chang-Yu liu Peng-Cheng Che zhi-Liang Ning hong-Bo Fan Jian-Fei Sun Yong-Jiang Huang Alfonso H.W.Ngan National Key Laboratory for Precision Hot Processing of Metals Harbin Institute of TechnologyHarbin 150001China Space Environment Simulation Research Infrastructure Harbin Institute of TechnologyHarbin 150001China Department of Mechanical Engineering The University of Hong KongHong Kong 999077China

The distinctive intrinsic heat treatment(IHT)originating from cyclic reheating in the laser-directed energy deposition(LDED) has attracted growing attention in recent *** this investigation,simulations and experimental characterizations were performed to examine the impact of IHT on the micros true ture and mechanical properties of LDED-fabricated CrCoNi medium-entropy alloy(MEA).The results show that the intensity of the IHT is proportional to the utilized laser energy density(LED).As the LED increased,significant dynamic recrystallization and grain refinement occurred within the alloy due to the enhanced intensity of ***,the high LED leads to severe hot cracking within the as-built MEA,resulting in inferior *** decreasing LED,the hot cracking was effectively ***,low LED weakened the intensity of IHT and consequently inhibited kinetic conditions of dynamic recrystallization,resulting in a heterogeneous grain structure characterized by multi-scale-sized *** structure provides significant hetero-deformation-induced hardening during plastic deformation,enabling the alloy to have a sustainable work-hardening *** expect that this work will have implications in taking full advantage of the unique IHT of the LDED process to fabricate ME As with excellent metallurgical quality and mechanical performance.

关键词： Intrinsic heat treatment Laser-directed energy deposition CrCoNi MEA Dynamic recrystallization Heterogeneous grain structure

Effects of orientation on the fatigue crack growth behaviors of the ZK60 magnesium alloy in air and PBS

在线全文

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2024年第1期12卷 281-294页

作者： Jiaqi Hu Zheng liu Zuoliang Ning hong Gao School of Chemical Engineering and Technology Tianjin UniversityTianjin 300072China Tianjin Key Laboratory of Chemical Process Safety and Equipment Technology Tianjin 300072China

Strong anisotropic corrosion and mechanical properties caused by specimen orientations greatly limit the applications of wrought magnesium *** investigate the influences of specimen orientation,the corrosion tests and(corrosion)fatigue crack growth tests were *** rolled and transverse surfaces of the materials show distinct corrosion rate differences in the stable corrosion stage,but the truth is the opposite for the initial stage of *** air,specimen orientations have a significant influence on the plastic deformation mechanisms near the crack tip,which results in different fatigue fracture surfaces and cracking *** with R-T specimens,N-T specimens show a slower fatigue crack growth(FCG)rate in air,which can be attributed to crack closure effects and deformation twinning near the crack *** corrosion environment will not significantly change the main plastic deformation mechanisms for the same type of ***,the FCG rate in phosphate buffer saline(PBS)is one order of magnitude higher than that in air,which is caused by the combined effects of hydrogen-induced cracking and anodic *** to the similar corrosion rates at crack tips,the specimens with different orientations display close FCG rates in PBS.

关键词： Magnesium alloy Orientation Corrosion Fatigue crack growth