检索结果-南通市图书馆

Transactions of Nonferrous Metals Society of China 2022年第9期32卷 2935-2947页

作者： zhen-yi shao Heng-kang PAN Rui SHU Xiao-song JIANG Min-hao ZHU School of Materials Science and Engineering Southwest Jiaotong UniversityChengdu 610031China School of Materials and Environmental Engineering Chengdu Technological UniversityChengdu 611730China Forschungszentrum Jülich GmbH Institut für Energie-und Klimaforschung-Plasmaphysik52425 JülichGermany

The mechanical properties and microstructures of Al_(2)O_(3)whiskers and graphene nano-platelets(GNPs)co-reinforced Cu-matrix composites were ***-matrix composites with a variation of GNPs amount were fabricated by mechanical alloying followed by vacuum hot-pressing sintering and hot isostatic *** Cu-matrix composite with 0.5 wt.%GNPs(GNPs-0.5)suggests a good interfacial bonding of both Cu/C and Cu/Al_(2)O_(3)*** the hardness and compressive strength of Cu-matrix composites show a consistent tendency that firstly increases to a critical value and then decreases with increasing GNPs *** is suggested that the most possible strengthening mechanisms of both GNPs and Al_(2)O_(3)whisker working in the Cu-matrix composites involve energy dissipating and load transfer,as well as grain refinements for *** synergetic effect of GNPs and Al_(2)O_(3)whiskers is highlighted that the embedded GNPs would hinder the crack path generated at the Al_(2)O_(3)/Cu interface and enhance the already outstanding strengthening effect that Al_(2)O_(3)whiskers provide.

关键词： graphene Al_(2)O_(3)whisker Cu-matrix composite microstructure interfacial interaction

Interfacial microstructure and mechanical properties of diffusion-bonded joints of titanium TC4 (Ti-6Al-4V) and Kovar (Fe-29Ni-17Co) alloys

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2017年第10期24卷 1023-1031页

作者： Ting-feng Song Xiao-song Jiang zhen-yi shao De-feng Mo De-gui Zhu Min-hao Zhu Christina H.Young Zhi-ping Luo School of Materials Science and Engineering Southwest Jiaotong University Department of Material Engineering Chengdu Technological University Key Laboratory of Infrared Imaging Materials and Detectors Shanghai Institute of Technical PhysicsChinese Academy of Sciences Department of Chemistry and Physics Fayetteville State University

Diffusion bonding is a near net shape forming process that can join dissimilar materials through atomic diffusion under a high pressure at a high *** alloy TC4（Ti-6 Al-4 V）and 4 J29 Kovar alloy（Fe-29 Ni-17 Co）were diffusely bonded by a vacuum hot-press sintering process in the temperature range of 700-850°C and bonding time of 120 min,under a pressure of 34.66 *** microstructures and intermetallic compounds of the diffusion-bonded joints were characterized by optical microscopy,scanning electron microscopy,X-ray diffraction（XRD）and energy dispersive spectroscopy（EDS）.The elemental diffusion across the interface was revealed by electron probe *** properties of joints were investigated by micro Vickers hardness and tensile *** of EDS and XRD indicated that（Fe,Co,Ni）-Ti,TiNi,Ti_2Ni,TiNi_2,Fe_2 Ti,Ti_（17） Mn_3 and Al_6 Ti_（19） were formed at the *** the bonding temperature was raised from 700 to 850°C,the voids of interface were reduced and intermetallic layers were *** tensile strength of joints at 53.5 MPa was recorded by the sintering process at 850°C for 120 *** surface of the joint indicated brittle nature,and failure took place through interface of intermetallic *** on the mechanical properties and microstructure of the diffusion-bonded joints,diffusion mechanisms between Ti-6 Al-4 Vtitanium and Fe-29 Ni-17 Co Kovar alloys were analyzed in terms of elemental diffusion,nucleation and growth of grains,plastic deformation and formation of intermetallic compounds near the interface.

关键词： Titanium alloy Kovar alloy Diffusion-bonded joint Microstructure Mechanical property

Elliptical encirclement control capable of reinforcing performances for UAVs around a dynamic target

在线全文

学校读者我要写书评

暂无评论

Defence Technology（防务技术） 2024年第2期32卷 104-119页

作者： Fei Zhang Xingling shao yi Xia Wendong Zhang National Key Laboratory for Electronic Measurement Technology School of Instrument and ElectronicsNorth University of ChinaTaiyuan030051China

Most researches associated with target encircling control are focused on moving along a circular orbit under an ideal environment free from external ***,elliptical encirclement with a time-varying observation radius,may permit a more flexible and high-efficacy enclosing solution,whilst the non-orthogonal property between axial and tangential speed components,non-ignorable environmental perturbations,and strict assignment requirements empower elliptical encircling control to be more challenging,and the relevant investigations are still *** this line,an appointed-time elliptical encircling control rule capable of reinforcing circumnavigation performances is developed to enable Unmanned Aerial Vehicles(UAVs)to move along a specified elliptical path within a predetermined reaching *** remarkable merits of the designed strategy are that the relative distance controlling error can be guaranteed to evolve within specified regions with a designer-specified convergence ***,wind perturbations can be online counteracted based on an unknown system dynamics estimator(USDE)with only one regulating parameter and high computational *** tool demonstrates that all involved error variables are ultimately limited,and simulations are implemented to confirm the usability of the suggested control algorithm.

关键词： Elliptical encirclement Reinforced performances Wind perturbations UAVs

Hydrometallurgical recovery of lithium carbonate and iron phosphate from blended cathode materials of spent lithium-ion battery

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2024年第3期43卷 1275-1287页

作者： shao-Le Song Run-Qing Liu Miao-Miao Sun Ai-Gang zhen Fan-zhen Kong Yue Yang School of Minerals Processing and Bioengineering Central South UniversityChangsha410083China Zhejiang Tianneng New Materials Co. Ltd.Huzhou313103China

The recycling of cathode materials from spent lithium-ion battery has attracted extensive attention,but few research have focused on spent blended cathode *** reality,the blended materials of lithium iron phosphate and ternary are widely used in electric vehicles,so it is critical to design an effective recycling *** this study,an efficient method for recovering Li and Fe from the blended cathode materials of spent LiFePO_(4)and LiNi_(x)Co_(y)Mn_(1-x-y)O_(2)batteries is ***,87%A1 was removed by alkali ***,91.65%Li,72.08%Ni,64.6%Co and 71.66%Mn were further separated by selective leaching with H_(2)SO_(4)and H_(2)O_(2).Li,Ni,Co and Mn in solution were recovered in the form of Li_(2)CO_(3)and hydroxide ***,98.38%Fe was leached from the residue by two stage process,and it is recovered as FePO_(4)·2H_(2)O with a purity of 99.5%by *** and P were present in FePO_(4)·2H_(2)O in amounts of 28.34%and 15.98%,***,the drift and control of various components were discussed,and cost-benefit analysis was used to assess the feasibility of potential application.

关键词： Spent lithium-ion battery Blended cathode materials Recovery Lithium carbonate Iron phosphate

Strain Gradient Finite Element Formulation of Flexoelectricity in Ferroelectric Material Based on Phase-Field Method

在线全文

学校读者我要写书评

暂无评论

ACTA MECHANICA SOLIDA SINICA 2024年第4期37卷 570-579页

作者： Wang, Shuai Su, Hengchang yi, Min shao, Li-Hua Beihang Univ Inst Solid Mech Sch Aeronaut Sci & Engn Natl Key Lab Strength & Struct Integr Beijing 100191 Peoples R China Nanjing Univ Aeronaut & Astronaut State Key Lab Mech & Control Aerosp Struct Nanjing 210016 Peoples R China Nanjing Univ Aeronaut & Astronaut Inst Frontier Sci Nanjing 210016 Peoples R China Nanjing Univ Aeronaut & Astronaut Key Lab Intelligent Nano Mat & Devices Minist Educ Nanjing 210016 Peoples R China Nanjing Univ Aeronaut & Astronaut Coll Aerosp Engn Nanjing 210016 Peoples R China

Flexoelectricity is a two-way coupling effect between the strain gradient and electric field that exists in all dielectrics, regardless of point group symmetry. However, the high-order derivatives of displacements involved in the strain gradient pose challenges in solving electromechanical coupling problems incorporating the flexoelectric effect. In this study, we formulate a phase-field model for ferroelectric materials considering the flexoelectric effect. A four-node quadrilateral element with 20 degrees of freedom is constructed without introducing high-order shape functions. The microstructure evolution of domains is described by an independent order parameter, namely the spontaneous polarization governed by the time-dependent Ginzburg-Landau theory. The model is developed based on a thermodynamic framework, in which a set of microforces is introduced to construct the constitutive relation and evolution equation. For the flexoelectric part of electric enthalpy, the strain gradient is determined by interpolating the mechanical strain at the node via the values of Gaussian integration points in the isoparametric space. The model is shown to be capable of reproducing the classic analytical solution of dielectric materials incorporating the flexoelectric contribution. The model is verified by duplicating some typical phenomena in flexoelectricity in cylindrical tubes and truncated pyramids. A comparison is made between the polarization distribution in dielectrics and ferroelectrics. The model can reproduce the solution to the boundary value problem of the cylindrical flexoelectric tube, and demonstrate domain twisting at domain walls in ferroelectrics considering the flexoelectric effect.

关键词： Flexoelectricity Phase-field method Ferroelectrics Domain configuration MODELS FRAMEWORK SYSTEMS STRESS

Influence of vibration on the lubrication effect of a splash-lubricated gearbox

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Zhejiang University-Science A(Applied Physics & Engineering) 2024年第4期25卷 324-339页

作者： yi LIU Kailin ZHANG Shuai shao Hongxu XIANG Zhijian YE State Key Laboratory of Rail Transit Vehicle System Southwest Jiaotong UniversityChengdu 610031China

In this study,we investigate the effect of rail vibrations on the lubrication and efficiency of a splash-lubricated gearbox;specifically,the gearbox of a rail-transit vehicle.A high-fidelity 3D numerical model of the gearbox in a moving reference system is described,as well as computational fluid dynamics(CFD)simulations of the gearbox with different vibration *** effects of rotational speed,oil-immersion depth,and different oil-injection volume rates on lubrication and efficiency are *** propose a method of evaluating the internal lubrication condition of a splash-lubricated gearbox and quantitatively compare the effects of different operating parameters on lubrication and ***,our experiment to verify the feasibility of the simulation method is *** results show that with vibration,the churning loss and oil supply for the bearings are significantly higher than those under static *** addition,among different vibrational directions,lateral vibration has the greatest influence on the lubrication condition and efficiency of the *** the studied railway-vehicle gearbox,the best lubrication condition is achieved at a rotational speed of 1600 r/min and an oil-immersion depth of two times the tooth height(***).Rotational speed is the operating parameter that has the most significant effect on the lubrication and efficiencyofthegearbox.

关键词： Comprehensive lubrication evaluation Churning loss Moving reference system Splash lubrication Vibrational excitation Gearbox

Equivalent Impedance Parameter Calculation of Three-phase Symmetrical Loads for Harmonic Source Location

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Modern Power Systems and Clean Energy 2024年第1期12卷 251-260页

作者： yi Zhang Bijie Liu Caihua Lin zhenguo shao Yuncong Xu the Department of Electrical Engineering and Automation Fuzhou UniversityFuzhouChina State Grid Fujian Electric Power Research Institute FuzhouChina

The equivalent impedance parameters of loads have been widely used to identify and locate the harmonic ***,the existing calculation methods suffer from outliers caused by the zero-crossing of the *** outliers can result in inaccuracy and unreliability of harmonic source *** address this issue,this paper proposes an innovative method of equivalent impedance parameter calculation of three-phase symmetrical loads that avoid *** correctness and effectiveness of the proposed method are verified by simulations on Simulink using actual monitoring *** results show that the proposed method is not only simple and easy to implement but also highly accurate.

关键词： abc-αβtransformation equivalent impedance parameters of load harmonic source location nonlinear load power quality

Epileptic brain network mechanisms and neuroimaging techniques for the brain network

在线全文

学校读者我要写书评

暂无评论

Neural Regeneration Research 2024年第12期19卷 2637-2648页

作者： yi Guo Zhonghua Lin zhen Fan Xin Tian Department of Neurology Sichuan Provincial People’s HospitalUniversity of Electronic Science and Technology of ChinaChengduSichuan ProvinceChina Sichuan Provincial Center for Mental Health Sichuan Provincial People’s HospitalUniversity of Electronic Science and Technology of ChinaChengduSichuan ProvinceChina Department of Geriatrics Sichuan Provincial People’s HospitalUniversity of Electronic Science and Technology of ChinaChengduSichuan ProvinceChina Department of Neurology Chongqing Key Laboratory of NeurologyThe First Affiliated Hospital of Chongqing Medical UniversityChongqingChina

Epilepsy can be defined as a dysfunction of the brain network,and each type of epilepsy involves different brain-network changes that are implicated diffe rently in the control and propagation of interictal or ictal *** more detailed information on brain network alterations can help us to further understand the mechanisms of epilepsy and pave the way for brain network-based precise therapeutic approaches in clinical *** increasing number of advanced neuroimaging techniques and electrophysiological techniques such as diffusion tensor imaging-based fiber tra ctography,diffusion kurtosis imaging-based fiber tractography,fiber ball imagingbased tra ctography,electroencephalography,functional magnetic resonance imaging,magnetoencephalography,positron emission tomography,molecular imaging,and functional ultrasound imaging have been extensively used to delineate epileptic *** this review,we summarize the relevant neuroimaging and neuroelectrophysiological techniques for assessing structural and functional brain networks in patients with epilepsy,and extensively analyze the imaging mechanisms,advantages,limitations,and clinical application ranges of each technique.A greater focus on emerging advanced technologies,new data analysis software,a combination of multiple techniques,and the construction of personalized virtual epilepsy models can provide a theoretical basis to better understand the brain network mechanisms of epilepsy and make surgical decisions.

关键词： electrophysiological techniques epilepsy functional brain network functional magnetic resonance imaging functional near-infrared spectroscopy machine leaning molecular imaging neuroimaging techniques structural brain network virtual epileptic models

Effects of loneliness and isolation on cardiovascular diseases:a two sample Mendelian Randomization Study

在线全文

学校读者我要写书评

暂无评论

Journal of Geriatric Cardiology 2024年第3期21卷 340-348页

作者： Jia-yin CAI Xin WANG Cong-yi zhenG Xue CAO zhen HU Run-Qing GU yi-Xin TIAN Ye TIAN Lan shao Lin-Feng ZHANG Zeng-Wu WANG Division of Prevention and Community Health National Center for Cardiovascular DiseaseNational Clinical Research Center of Cardiovascular DiseaseState Key Laboratory of Cardiovascular DiseaseFuwai HospitalPeking Union Medical College&Chinese Academy of Medical SciencesBeijingChina

BACKGROUND Loneliness and isolation are associated with multiple cardiovascular diseases(CVDs),but there is a lack of research on whether they were causally *** conducted a Mendelian Randomization(MR)study to explore causal relationships between loneliness and isolation and multiple *** Single nucleotide polymorphisms associated with loneliness and isolation were identified from a genome-wide association study(GWAS)of 455,364 individuals of European ancestry in the IEU GWAS *** data for 15 CVDs were also obtained from the IEU GWAS *** used three MR methods including inverse variance weighting,MR-Egger,and weighted median estimation to assess the causal effect of exposure on ***'s Q test and MR-Egger intercept test were used to evaluate the heterogeneity and *** MR analysis showed that loneliness and isolation were significantly associated with essential hypertension(OR=1.07,95%CI:1.03-1.12),atherosclerotic heart disease(OR=1.04;95%CI:1.02-1.06),myocardial infarction(OR=1.02;95%CI:1-1.04)and angina(OR=1.04;95%CI=1.02-1.06).No heterogeneity and pleiotropy effects were found in this *** Causal relationship of loneliness and isolation with CVDs were found in this study.

关键词： diseases cardiovascular angina

Reliable calculations of nuclear binding energies by the Gaussian process of machine learning

在线全文

学校读者我要写书评

暂无评论

Nuclear Science and Techniques 2024年第6期35卷 130-144页

作者： Zi-yi Yuan Dong Bai zhen Wang Zhong-Zhou Ren School of Physics Science and Engineering Tongji UniversityShanghai 200092China College of Science Hohai UniversityNanjing 211100China Key Laboratory of Advanced Micro-Structure Materials Ministry of EducationShanghai 200092China

Reliable calculations of nuclear binding energies are crucial for advancing the research of nuclear physics. Machine learning provides an innovative approach to exploring complex physical problems. In this study, the nuclear binding energies are modeled directly using a machine-learning method called the Gaussian process. First, the binding energies for 2238 nuclei with Z > 20 and N > 20 are calculated using the Gaussian process in a physically motivated feature space, yielding an average deviation of 0.046 MeV and a standard deviation of 0.066 MeV. The results show the good learning ability of the Gaussian process in the studies of binding energies. Then, the predictive power of the Gaussian process is studied by calculating the binding energies for 108 nuclei newly included in AME2020. The theoretical results are in good agreement with the experimental data, reflecting the good predictive power of the Gaussian process. Moreover, the α-decay energies for 1169 nuclei with 50 ≤ Z ≤ 110 are derived from the theoretical binding energies calculated using the Gaussian process. The average deviation and the standard deviation are, respectively, 0.047 MeV and 0.070 MeV. Noticeably, the calculated α-decay energies for the two new isotopes ^ (204 )Ac(Huang et al. Phys Lett B 834, 137484(2022)) and ^ (207) Th(Yang et al. Phys Rev C 105, L051302(2022)) agree well with the latest experimental data. These results demonstrate that the Gaussian process is reliable for the calculations of nuclear binding energies. Finally, the α-decay properties of some unknown actinide nuclei are predicted using the Gaussian process. The predicted results can be useful guides for future research on binding energies and α-decay properties.

关键词： Nuclear binding energies decay Machine learning Gaussian process