检索结果-南通市图书馆

Rare Metals 2024年第4期43卷 1786-1792页

作者： Yuan-Feng xie Xing-Cheng xie Zhong-Wu Li rui-Jun Cao Zhong-Kun Lin Qing Li Chen-Guang Lin Powder Metallurgy and Special Materials Research Department General Research Institute for Nonferrous MetalsBeijing100088China

The effects of cryogenic treatment(CT)and tempering-cryogenic treatment(TCT)on the microstructure and properties of coarse-grained WC-10Co cemented carbides with different carbon contents were *** binder phase,WC mean grain sizes,W solubility in the binder,relative magnetic s aturation,densities,hardness,wear resistance and second phase precipitation of cemented carbides with different heat treatments were *** results show that there are significant changes of microstructure and properties in the samples with CT and TCT,especially due to the precipitation of metastable nanoparticles W_(x)Co_(y)C_(z) in the binder during the heat treatments of CT and *** the simultaneous combination of microstructure and nanoparticle-reinforced binder,a dramatically improved combination of hardness and wear resistance of the samples after TCT has been achieved.

关键词： Cryogenic treatment Tempering Coarsegrained cemented carbide Carbon content Nanoparticlereinforced binder

The evolution of robotics:research and application progress of dental implant robotic systems

在线全文

学校读者我要写书评

暂无评论

International Journal of Oral Science 2024年第2期16卷 173-185页

作者： Chen Liu Yuchen Liu rui xie Zhiwen Li Shizhu Bai Yimin Zhao State Key Laboratory of Oral&Maxillofacial Reconstruction and Regeneration Xi’anChina National Clinical Research Center for Oral Diseases Xi’anChina Shaanxi Key Laboratory of Stomatology Xi’anChina Digital Center School of StomatologyThe Fourth Military Medical UniversityXi’anChina

The use of robots to augment human capabilities and assist in work has long been an *** has been developing since the 1960s when the first industrial robot was *** technology has advanced,robotic-assisted surgery has shown numerous advantages,including more precision,efficiency,minimal invasiveness,and safety than is possible with conventional techniques,which are research hotspots and cutting-edge *** article reviewed the history of medical robot development and seminal research papers about current research *** the autonomous dental implant robotic system as an example,the advantages and prospects of medical robotic systems would be discussed which would provide a reference for future research.

关键词： robot robotic application

Analysis of explosion wave interactions and rock breaking effects during dual initiation

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第8期31卷 1788-1798页

作者： Renshu Yang Jinjing Zuo Liwei Ma Yong Zhao zhen Liu Quanmin xie School of Civil and Resource Engineering University of Science and Technology BeijingBeijing 100083China Research Institute of Macro-Safety Science University of Science and Technology BeijingBeijing 100083China State Key Laboratory of Precision Blasting Jianghan UniversityWuhan 430056China

In blasting engineering, the location and number of detonation points, to a certain degree, regulate the propagation direction ofthe explosion stress wave and blasting effect. Herein, we examine the explosion wave field and rock breaking effect in terms of shockwave collision, stress change of the blast hole wall in the collision zone, and crack propagation in the collision zone. The produced shockwave on the collision surface has an intensity surpassing the sum of the intensities of the two colliding explosion shock waves. At the collisionlocation, the kinetic energy is transformed into potential energy with a reduction in particle velocity at the wave front and the wavefront pressure increases. The expansion form of the superposed shock wave is dumbbell-shaped, the shock wave velocity in the collisionarea is greater than the radial shock wave velocity, and the average propagation angle of the explosion shock waves is approximately 60°.Accordingly, a fitted relationship between blast hole wall stress and explosion wave propagation angle in the superposition area is *** the experimental conditions, the superimposed explosion wave stress of the blast hole wall is approximately 1.73 times the singleexplosionwave incident stress. The results of the model test and numerical simulations reveal that large-scale radial fracture cracks weregenerated on the blast hole wall in the superimposed area, and the width of the crack increased. The width of the large-scale radial fracturecracks formed by a strong impact is approximately 5% of the blast hole length. According to the characteristics of blast hole wallcompression, the mean peak pressures of the strongly superimposed area are approximately 1.48 and 1.84 times those of the weakly superimposedand nonsuperimposed areas, respectively.

关键词： blasting shock wave collision high-speed schlieren system crack fracture characteristic explosion wave

Reducing Operation Emissions and Improving Work Efficiency Using a Pure Electric Wheel Drive Tractor

在线全文

学校读者我要写书评

暂无评论

Engineering 2024年第6期37卷 230-245页

作者： Chang-Kai Wen Wen Ren Qing-zhen Zhu Chun-Jiang Zhao zhen-Hao Luo Sheng-Li Zhang Bin xie Zhi-Jun Meng Research Center of Intelligent Equipment Beijing Academy of Agriculture and Forestry SciencesBeijing 100097China State Key Laboratory of Intelligent Agricultural Power Equipment Beijing 100097China BYD Company Limited Shenzhen 518118China College of Agricultural Engineering Jiangsu UniversityZhenjiang 212013China College of Engineering China Agricultural UniversityBeijing 100083China

In response to the problems of excessive greenhouse-gas and particulate emissions and the low traction efficiency of conventional diesel tractors in the field,a purely electric wheel-side drive tractor was studied,including an electric motor drive system,a battery ballast system,and an electro–hydraulic suspension *** paper develops a dynamics model of an electric tractor-ploughing unit under complex soil conditions,leading to the proposal of an active control method for drive wheel torque and a joint control method for the traction force of the suspension system and the front-and rear-axle loads of a ***,the tractor is prototyped and assembled,and ploughing tests are carried *** ploughing results show that the active torque-distribution control method proposed in this study reduces the tractor slip by 14.83%and increases the traction efficiency by 10.28%compared with the average torquedistribution *** with the conventional traction control mode,the joint control method for traction and ballast proposed in this paper results in a 3.7%increase in traction efficiency,a 15.05%decrease in slip,and a 4.9%reduction in total drive motor energy *** study will help to improve the operation quality and traction efficiency of electric tractors in complex soil conditions.

关键词： Electric tractor Ploughing unit Torque distribution Active ballast Traction performance

Catalyst-free and Reprocessable Aromatic Polydithiourethanes

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of Polymer Science 2024年第10期42卷 1435-1441,I0007页

作者： Bo Yang Hai-Jun Feng Tian-Tian Ni Xiao-rui Zhou Tao xie Ning zheng State Key Laboratory of Chemical Engineering College of Chemical and Biological EngineeringZhejiang UniversityHangzhou310058China Department of Colorectal Surgery and Oncology Key Laboratory of Cancer Prevention and InterventionMinistry of EducationThe Second Affiliated HospitalZhejiang University School of MedicineHangzhou310009China

The incorporation of dynamic covalent bonds into thermosets facilitates the reprocessing of polymer networks,thereby meeting the sustainable requirements for polymer ***,the mechanical properties of many materials often decline significantly upon reprocessing due to side reactions caused by harsh processing *** this work,we find that the aromatic dithiocarbamate bond can undergo dissociation under mild conditions without the need for a catalyst,enabling the efficient reprocessing of the corresponding *** a consequence,the mechanical properties of the polydithiourethane can be largely preserved after *** discovery of this dynamic chemistry is anticipated to broaden the potential for material design in dynamic covalent polymer networks.

关键词： Reprocessing Polydithiourethane Dynamic covalent bond

Influence of Heat-setting Temperature on the Microporous Structure and Properties of PP/HDPE Bilayer Microporous Membranes

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Polymer Science 2024年第8期42卷 1243-1252页

作者： Jie xie Yong-Shi Wu Jia-Yi xie rui-Jie Xu Cai-Hong Lei Sai-Nan Song Guang-Quan Li An-Ping Huang School of Materials and Energy Guangdong University of TechnologyGuangzhou 510006China Lanzhou Petrochemical Research Center Petrochemical Research InsititutePetroChinaLanzhou 730060China School of Chemistry and Civil Engineering Shaoguan CollegeShaoguan 512005China

Due to the mechanical stability of PP layer,the PP/HDPE double-layer microporous mem brane could be prepared at a higher heat-setting temperatu re than that of PE monolayer *** this work,the effects of heat-setting temperature on the pore structure and properties of PP/HDPE dou ble-layer membrane were *** the increase of heat-setting temperature from 120℃to 130℃,the length of connecting bridge crystal and crystallinity in the PE layer increase due to the melting of thin lamellae and the stability of connecting bridge structure during *** corresponding air permeability,po rosity,wetta bility of liquid electrolyte and mechanical property of the heat-set microporous membrane increase,exhibiting better electrochemical ***,when the heat-setting temperature is further increased to 140℃,higher than the melting point of PE resin,some pores are closed since the lamellae and connecting bridges melt and shrink during heat-setting,resulting in a decrease of air permeability and *** contrast,there is negligible change in the PP layer within the above heat-setting temperature *** study successfully builds the relationship between the stable pore structure and property of microporous membrane during heat-setting,which is helpful to guide the production of high-pe rformance PP/PE/PP lithium batteries separator.

关键词： PP/HDPE bilayer microporous membranes Heat-setting temperature SAXS

Research progress of slippage characteristic and gas film stability enhancement methods on biomimetic hydrophobic surfaces

在线全文

学校读者我要写书评

暂无评论

Journal of Hydrodynamics 2024年第1期36卷 87-101页

作者： Meng-zhuo Zhang Hai-bao Hu Liu-zhen Ren Lu-yao Bao Jun Wen Luo xie School of Marine Science and Technology Northwestern Polytechnical UniversityXi’an710072China Research and Development Institute of Northwestern Polytechnical University in Shenzhen Shenzhen518063China

The biomimetic hydrophobic surface is a potentially efficient underwater drag reduction method and the drag reduction mechanism of this kind of surface comes from the interfacial *** now,it is a hotspot to grasp the slippage characteristic and explore slippage enhancement *** paper not only summarizes our numerical simulation and experimental results of slippage characteristic at the solid-liquid interface(SLI)of hydrophobic surfaces(HS)and the gas-liquid interface(GLI)of superhydrophobic surfaces(SHS)in recent years,but also introduces some innovative methods that can effectively improve the gas film stability and drag reduction effect of ***,we used the molecular dynamics(MD)simulation method to figure out the effect of the solid-liquid interaction strength,the system temperature and the shear rate on the slippage of SLI,and expound their action mechanism from molecular ***,by MD and multibody dissipative particle dynamics(MDPD)method,the slippage behavior at the GLI was studied under the influence of the microstructure size and the flow driving *** proposed a new kind of hybrid slip boundary condition model to describe the slippage characteristic on *** addition,we found through experiment that a three-dimensional backflow will appear on the GLI under the interfacial adsorption of surfactants,and the backflow direction will reverse with the change of GLI ***,we put forward the wettability step structure and gas injection method to enhance the stability and drag reduction effect of the gas film on SHS.

关键词： Hydrophobic surface superhydrophobic surface interfacial slip underwater drag reduction

Biomimetic porous silicon oxycarbide ceramics with improved specific strength and efficient thermal insulation

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2024年第1期168卷 185-193页

作者： Zhuoqing Zhang Jinghan Li Lei Cao Yu Shi Huajie Yang rui Yang Fan xie Xing Zhang Shi-changxu Innovation Center for Advanced Materials Institute of Metal ResearchChinese Academy of SciencesShenyang 110016China School of Materials Science and Engineering University of Science and Technology of ChinaHefei 230026China School of Materials Science and Engineering Shenyang Ligong UniversityShenyang 110159China Shenyang Aircraft Design and Research Institute Shenyang 110035China

Considering the challenge of aerodynamic heating,the development of high-performance insulating ce-ramic materials with lightweight and low thermal conductivity is crucially important for aerospace vehi-cles to achieve flight at high speed for a long *** this work,macro-porous silicon oxycarbide(SiOC)ceramics with directional pores(DP-SiOC)(mean pore size of 88.1μm)were prepared using polysiloxane precursors via freeze casting and photocrosslinking,followed by *** DP-SiOC samples were lightweight(density∼0.135 g cm^(-3))with a porosity of 90.4%,which showed good shapability through the molding of polysiloxane *** DP-SiOC samples also exhibited an ultra-low thermal con-ductivity of 0.048 W(m K)^(-1)at room temperature,which can also withstand heat treatment at 1200°C for 1 *** addition,scaffolds with triply periodic minimal surfaces(TPMS)were fabricated using digital light processing(DLP)printing,which was further filled with polysiloxane precursors for increasing the strength of *** TPMS scaffolds filled with macro-porous SiOC ceramics(TPMS-DP-SiOC)showed good integration between TPMS and macro-pore structures,which had a porosity∼75%and high specific strength of 9.73×10^(3)N m kg^(-1).The thermal conductivity of TPMS-DP-SiOC samples was 0.255 W(m K)^(-1)at room *** biomimetic TPMS-DP-SiOC ceramics developed in this study are likely used for thermal protection systems.

关键词： Thermal insulation Light weight Macro-porous ceramics SiOC

Root cause of corrosion failure of tin coating on wire clamp in marine atmosphere

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第4期31卷 998-1014页

作者： zhen Zhong Wang-yan Ly Teng-yuan Liu Yi xie Yang Yang zhen-zhu Wang Deng-ke Li Xiao-bo Li Tang-qing Wu School of Materials Science and Engineering Xiangtan UniversityXiangtan 411105HunanChina Electric Power Research Institute of Guangdong Power Grid Co. Ltd.Guangzhou 510080GuangdongChina Shenyang National L aboratory for Materials Science Institute of Metal ResearchChinese Academy of SciencesShenyang 110016LiaoningChina School of Materials Science and Engineering.University of Science and Technology of China Shenyang 110016LiaoningChina Electric Power Research Institute State Grid Hunan Electric Power CompanyChangsha 410007HunanChina School of Mechanical Engineering and Mechanics Xiangtan UniversityXiangtan 411105HunanChina School of Information Science and Engineering Changsha Normal UniversityChangsha 410199HunanChina

The failure cause of a tinned copper wire clamp in marine atmosphere was studied systematically by X-ray photoelectron spectroscopy,scanning electron microscopy with energy dispersive spectroscopy and electrochemical *** main components of the green rust on the surface of the damaged wire clamp are SnO_(2),CuO,Cu_(2)Cl(OH)_(3) and CuCO(OH)_(2).Much of green rust distributes at the platform edge along the axial direction on the crimp connection,and severe corrosion and corrosion pits occur at the platform edge zone along the axial *** enriching Cl-at the marine atmosphere and the existing O_(2) in air collectively enhance the corrosion process of the tin coating and the copper *** element model results show that the residual stress and strain of the tin coating are the largest at the platform edge along the axial direction on the crimp connection,and the corresponding electrode potential of the tin coating at this zone drops *** above results indicate that the residual strain increases the driving force of the corrosion electrochemical reactions and accelerates the corrosion rate and the pit corrosion of the tin coating at this zone.

关键词： Tin coating Marine atmosphere Residual strain-Chloride ion Corrosion failure

Topological Confinement in Reversibly Interlocked Polymer Networks

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of Polymer Science 2024年第2期42卷 133-140,I0004页

作者： Wan-Ting Dai zhen-Hua xie Yu-Bin Ke Yang You Min-Zhi Rong Ming-Qiu Zhang Key Laboratory for Polymeric Composite and Functional Materials of Ministry of Education GD HPPC LabIGCMESchool of ChemistrySun Yat-sen UniversityGuangzhou510275China Spallation Neutron Source Science Center China Spallation Neutron SourceDongguan523803China Institute of High Energy Physics Chinese Academy of SciencesBeijing100049China College of Materials and Metallurgy Guizhou UniversityGuiyang550025China

Recently, we reported a series of reversibly interlocked polymer networks(RILNs), whose mechanical robustness and functionalities improvement was believed to be derived from topological interlocking of two sub-networks, although the direct evidence for the deduction is still lacking. Herein, a specially-designed RILNs system, in which the inter-component hydrogen bonds can be shielded as needed, was prepared and used to study the micro-structures of RILNs, aiming to verify the existence of mechanical interlocking in RILNs. By changing the pH of the swelling solvent, the effect exerted by the inter-component non-covalent bonds was eliminated, so detailed information of the networks structure was exposed. The small angle X-ray scattering(SAXS) and small-angle neutron scattering(SANS) results indicated that swelling-induced structural evolution of the two sub-networks mutually affected each other, even when the inter-component hydrogen bonds were absent, proving the presence of topological interlocking. The findings may help to draw a more accurate physical image and reveal the detailed structureproperty relationship of RILNs.

关键词： Reversibly interlocked polymer networks Small angle X-ray scattering Small-angle neutron scattering Topological confinement