检索结果-南通市图书馆

Journal of Zhejiang University-Science A(Applied Physics & Engineering) 2023年第4期24卷 332-349页

作者： Kang DUAN Ri-hua JIANG Xue-jian LI Lu-chao WANG ze-ying yang School of Civil Engineering Shandong UniversityJinan 250061China

Damage in a rock mass is heavily dependent on the existence and growth of joints,which are also influenced by the complex stress states induced by human activities(e.g.,tunneling and excavation).A proper representation of the loading path is essential for understanding the mechanical behaviors of rock masses.Based on the discrete element method(DEM),the influence of the loading path on the cracking process of a rock specimen containing an open flaw is examined.The effectiveness of the model is confirmed by comparing the simulation results under a uniaxial compression test to existing research findings,where wing crack initiates first and secondary cracks contribute to the failure of the specimen.Simulation results confirm that the cracking process is dependent upon both the confining pressure and the loading path.Under the axial loading test,a higher confining pressure suppresses the development of tensile wing cracks and forces the formation of secondary cracks in the form of shear bands perpendicular to the flaw.Increase of confining pressure also decreases the influence of the loading path on the cracking process.Reduction of confining pressure during an unloading test amplifies the concentration of tensile stress and ultimately promotes the appearance of a tensile splitting fracture at meso-scale.Confining pressure at the failure stage is well predicted by the Hoek-Brown failure criterion under quasi-static conditions.

关键词： Cracking process Loading path Fractured rock mass Discrete element method(DEM) Local stress concentration

Solar evaporation for simultaneous oil-water separation and electricity generation with Janus wood-based absorbers

在线全文

学校读者我要写书评

暂无评论

Frontiers of Environmental Science & Engineering 2024年第2期18卷 13-23页

作者： Yue yang ze Fu Qi Zhang Jiangsu Key Laboratory of Chemical Pollution Control and Resources Reuse School of Environmental and Biological EngineeringNanjing University of Science&TechnologyNanjing 210094China Key Laboratory of Industrial Ecology and Environmental Engineering(Ministry of Education) School of Environmental Science and TechnologyDalian University of TechnologyDalian 116024China National Laboratory of Solid State Microstructures Collaborative Innovation Center of Advanced MicrostructuresCollege of Engineering and Applied SciencesKey Laboratory of Intelligent Optical Sensing and Manipulation(Ministry of Education)Jiangsu Key Laboratory of Artificial Functional MaterialsNanjing UniversityNanjing 210093China

Oily wastewater from ocean oil spills endangers marine ecosystems and human health. Therefore, developing an effective and sustainable solution for separating oil-water mixtures is urgent. Interfacial solar photothermal evaporation is a promising approach for the complete separation of two-phase mixtures using only solar energy. Herein, we report a carbonized wood-based absorber with Janus structure of comprising a hydrophobic top-layer and an oleophobic bottom-layer for simultaneous solar-driven oil-water separation and electricity generation. Under sunlight irradiation, the rapid evaporation of seawater will induce a separation of oil-water mixtures, and cause a high salt concentration region underlying the interface, while the bottom “bulk water” maintains in a low salt concentration, thus forming a salinity gradient. Electricity can be generated by salinity gradient power. Therefore, oil-water separation efficiency of > 99% and derived extra electricity power of ~0.1 W/m2 is achieved under solar radiation, demonstrating the feasibility of oil-water separation and electricity production synchronously directly using solar energy. This work provides a green and cost-effective path for the separation of oil-water mixtures.

关键词： Oily wastewater Carbonized wood Salinity gradient Electricity generation Solar irradiation

Effect of inorganic arsenic in paddy soil on the migration and transformation of selenium species in rice plants

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Environmental Sciences 2024年第9期143卷 35-46页

作者： Ganga Raj Pokhrel Kaiteng Wang Kaiyang ying Yongchen Wu ze Wang Xi Zhu Can Qu Hong Li Fengfu Fu Guidi yang Fujian Provincial Key Laboratory of Agroecological Processing and Safety Monitoring Key Laboratory for Medicinal Plant Chemistry and Chemical BiologyCollege of JunCao Science and EcologyFujian Agriculture and Forestry UniversityFuzhou 350002China Department of Chemistry Birendra Multiple CampusTribhuvan UniversityChitwan 00977-44200BharatpurNepal Key Laboratory for Analytical Science of Food Safety and Biology of Ministry of Education Fujian Provincial Key Lab of Analysis and Detection for Food SafetyCollege of ChemistryFuzhou UniversityFuzhou 350116China

Selenium(Se)in paddy rice is one of the significant sources of human Se nutrition.However,the effect of arsenic(As)pollution in soil on the translocation of Se species in rice plants is unclear.In this research,a pot experiment was designed to examine the effect of the addition of 50 mg As/kg soil as arsenite or arsenate on the migration of Se species from soil to indica Minghui 63 and Luyoumingzhan.The results showed that the antagonism between inorganic As and Se was closely related to the rice cultivar and Se oxidation state in soil.Relative to the standalone selenate treatment,arsenite significantly(p<0.05)decreased the accumulation of selenocystine,selenomethionine and selenate in the roots,stems,sheaths,leaves,brans and kernels of both cultivars by 21.4%-100.0%,40.0%-100.0%,41.0%-100%,5.4%-96.3%,11.3%-100.0% and 26.2%-39.7% respectively,except for selenocystine in the kernels of indica Minghui 63 and selenomethionine in the leaves of indica Minghui 63 and the stems of indica Luyoumingzhan.Arsenate also decreased(p<0.05)the accumulation of selenocystine,selenomethionine and selenate in the roots,stems,brans and kernels of both cultivars by 34.9%-100.0%,30.2%-100.0%,11.3%-100.0% and 5.6%-39.6%respectively,except for selenate in the stems of indica Minghui 63.However,relative to the standalone selenite treatment,arsenite and arsenate decreased(p<0.05)the accumulation of selenocystine,selenomethionine and selenite only in the roots of indica Minghui 63 by 45.5%-100.0%.Our results suggested that arsenite and arsenate had better antagonism toward Se species in selenate-added soil than that in selenite-added soil;moreover,arsenite had a higher inhibiting effect on the accumulation of Se species than arsenate.

关键词： Rice(Oryza sativa L.) Inorganic arsenic Selenium species Translocation Antagonistic effect

Unique polysulfide reaction on VO2 for restraining shuttle effect in soft-packaged Li-S pouch cells

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2024年第6期43卷 2842-2850页

作者： Ruo-Xuan yang Qing-Chun Zhang Jing-Sheng Cai Xuan Cao Qin yang ying-ze Song Wei Zhang State Key Laboratory of Environment-Friendly Energy Materials Tianfu Institute of Research and InnovationSchool of Materials and ChemistrySouthwest University of Science and Technology School of Materials Engineering Changshu Institute of Technology Chongqing Institute of Green and Intelligent Technology Chinese Academy of Sciences

The shuttle phenomenon and retarded conversion kinetics of lithium poly sulfides （LiPSs） are relatively severe in lithium-sulfur （Li-S） pouch cells.Owing to their redox potential in the sulfur working window,VO2na... 详细信息

关键词： Vanadium dioxide

Response of runoff and its components to climate change in the Manas River of the Tian Shan Mountains

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Advances in Climate Change Research 2024年第1期15卷 62-74页

作者： ze-Long yang Peng BAI Key Laboratory of Water Cycle and Related Land Surface Processes Institute of Geographic Sciences and Natural Resources ResearchChinese Academy of SciencesBeijing 10010lChina University of Chinese Academy of Sciences Beijing 100049China

A warming-wetting climate trend has led to increased runoff in most watersheds in the Tian Shan Mountains over the past few decades.However,it remains unclear how runoff components,that is,rainfall runoff(Rrain),snowmelt runoff(Rsnow),and glacier meltwater(Rglacier),responded to historical climate change and how they will evolve under future climate change scenarios.Here,we used a modified Hydrologiska Byrans Vattenbalansavdelning(HBV)model and a detrending method to quantify the impact of precipitation and temperature changes on runoff components in the largest river(Manas River)on the northern slope of the Tian Shan Mountains from 1982 to 2015.A multivariate calibration strategy,including snow cover,glacier area,and runoff was implemented to constrain model parameters associated with runoff components.The downscaled outputs of 12 general circulation models(GCMs)from the Sixth Coupled Model Intercomparison Project(CMIP6)were also used to force the modified HBV model to project the response of runoff and its components to future(2016-2100)climate change under three common socio-economic pathways(SSP126,SSP245,and SSP585).The results indicate that Rrain dominates mean annual runoff with a proportion of 42%,followed by Rsnow(37%)and Rglacier(21%).In terms of inter-annual variation,Rrain and Rsnow show increasing trends(0.93(p0.05)mm per year),while Rglacier exhibits an insignificant(p>0.05)decreasing trend(-0.12 mm per year),leading to an increasing trend in total runoff(1.12 mm per year,p>0.05).The attribution analysis indicates that changes in precipitation and temperature contribute 8.16 and 10.37 mm,respectively,to the increase in runoff at the mean annual scale.Climate wetting(increased precipitation)increases Rrain(5.03 mm)and Rsnow(3.19 mm)but has a limited effect on Rglacier(-0.06 mm),while warming increases Rrain(10.69 mm)and Rglacier(5.79 mm)but decreases Rsnow(-6.12 mm).The negative effect of glacier shrinkage on Rglacier has outweighed the positive effect of warming on Rglaciers resulti

关键词： Tian Shan Rainfall runoff Snowmelt runoff Glacier meltwater Warming-wetting Tipping point

Pressure transient characteristics of non-uniform conductivity fractured wells in viscoelasticity polymer flooding based on oil-water two-phase flow

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Petroleum Science 2024年第1期21卷 343-351页

作者： yang Wang Jia Zhang Shi-Long yang ze-Xuan Xu Shi-Qing Cheng National Key Laboratory of Petroleum Resources and Engineering China University of Petroleum(Beijing)Beijing102249China

Polymer flooding in fractured wells has been extensively applied in oilfields to enhance oil recovery.In contrast to water,polymer solution exhibits non-Newtonian and nonlinear behavior such as effects of shear thinning and shear thickening,polymer convection,diffusion,adsorption retention,inaccessible pore volume and reduced effective permeability.Meanwhile,the flux density and fracture conductivity along the hydraulic fracture are generally non-uniform due to the effects of pressure distribution,formation damage,and proppant breakage.In this paper,we present an oil-water two-phase flow model that captures these complex non-Newtonian and nonlinear behavior,and non-uniform fracture characteristics in fractured polymer flooding.The hydraulic fracture is firstly divided into two parts:high-conductivity fracture near the wellbore and low-conductivity fracture in the far-wellbore section.A hybrid grid system,including perpendicular bisection(PEBI)and Cartesian grid,is applied to discrete the partial differential flow equations,and the local grid refinement method is applied in the near-wellbore region to accurately calculate the pressure distribution and shear rate of polymer solution.The combination of polymer behavior characterizations and numerical flow simulations are applied,resulting in the calculation for the distribution of water saturation,polymer concentration and reservoir pressure.Compared with the polymer flooding well with uniform fracture conductivity,this non-uniform fracture conductivity model exhibits the larger pressure difference,and the shorter bilinear flow period due to the decrease of fracture flow ability in the far-wellbore section.The field case of the fall-off test demonstrates that the proposed method characterizes fracture characteristics more accurately,and yields fracture half-lengths that better match engineering reality,enabling a quantitative segmented characterization of the near-wellbore section with high fracture conductivity and the far-wellbore section with low fracture conduct

关键词： Polymer flooding Non-Newtonian fluid Non-uniform fracture conductivity Two-phase flow Pressure transient analysis

Carbon enhanced nucleophilicity of Na_(3)V_(2)(PO_(4))_(3):A general approach for dendrite-free zinc metal anodes

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第4期91卷 203-212页

作者： Sijun Wang Lingzi Hu Xiaohui Li Dan Qiu Shunhang Qiu Qiancheng Zhou Wenwen Deng Xiaoying Lu ze yang Ming Qiu ying Yu Institute of Nanoscience and Nanotechnology School of Physical Science and TechnologyCentral China Normal UniversityWuhan 430079HubeiChina School of Material Science and Engineering Suzhou University of Science and TechnologySuzhou 215000JiangsuChina Faculty of Science and Technology Technological and Higher Education Institute of Hong KongHong KongChina

Zincophilic property and high electrical conductivity are both very important parameters to design novel Zn anode for aqueous Zn-ion batteries(AZIBs).However,single material is difficult to exhibit zincophilic property and high electrical conductivity at the same time.Herein,originating from theoretical calculation,a zincophilic particle regulation strategy is proposed to address these limitations and carbon coated Na_(3)V_(2)(PO_(4))_(3)is taken as an example to be a protective layer on zinc metal(NVPC@Zn).Na_(3)V_(2)(PO_(4))_(3)(NVP)is a common cathode material for Zn-ion batteries,which is zincophilic.Carbon materials not only offer an electron pathway to help Zn deposition onto NVPC surface,but also enhance the zinc nucleophilicity of Na_(3)V_(2)(PO_(4))_(3).Hence,this hybrid coating layer can tune zinc deposition and resist side reactions such as hydrogen generation and Zn metal corrosion.Experimentally,a symmetrical battery with NVPC@Zn electrode displays highly reversible plating/stripping behavior with a long cycle lifespan over 1800 h at2 mA cm^(-2),much better than carbon and Na_(3)V_(2)(PO_(4))_(3)solely modified Zn electrodes.When the Na_(3)V_(2)(PO_(4))_(3)is replaced with zincophobic Al2O3or zincophilic V2O3,the stability of the modified zinc anodes is also prolonged.This strategy expands the option of zincophilic materials and provides a general and effective way to stabilize the Zn electrode.

关键词： Zinc-ion batteries Zinc anode Carbon enhanced nucleophilicity Zincophilic particle regulation

Compatibility evaluation between waterborne epoxy resin and SBR latex modified asphalt emulsion

在线全文

学校读者我要写书评

暂无评论

Journal of Traffic and Transportation Engineering(English Edition) 2024年第1期11卷 160-171页

作者： Jianhua yang Zhengqi Zhang ying Fang Key Laboratory for Special Area Highway Engineering of Ministry of Education Chang'an UniversityXi'an 710064China

Good compatibility between waterborne epoxy resin(WER)modifier and styrene-butadiene rubber(SBR)latex modified asphalt emulsion(SBRE)is an essential premise for good pavement performance of WER and SBR latex compositely modified asphalt emulsion(WSAE).This study aims to explore the compatibility between WER modifier and SBRE.To achieve the goal,several WER modifiers produced by two methods were first selected to modify SBRE,thus the WSAEs were prepared.Next,storage stability and workability of the WSAEs themselves,and high-temperature performance,rheological behavior and temperature sensitivity of their evaporated residues were compared and evaluated via performing a series of experiments,respectively,thus the WER modifier possessing an optimal modification effect was recommended.Results show that the storage stability of WSAEs is sensitive to the amount of WERs.The incorporation of 1%WERs by the mass of SBRE improves the storage stability of SBRE,while WERs that exceed 1%weaken its storage stability.When the WERs reach 3%and 4%,the 5 d storage stability of prepared WSAEs will be beyond the limitation of specification.Incorporating WERs into SBRE negatively affects the workability of SBRE,and the workability of WSAEs is adversely influenced by the WERs content and the storage time.To ensure the construction,the WSAEs with 3%and 4%WERs should not be stored for more than 36 h and 48 h,respectively.The WERs effectively improve the high-temperature performance of SBRE residue,especially the 3%WERs.Besides,the WERs notably enhance the rheological property and thermal stability of SBRE residue.In contrast,the WER modifier produced by chemically modified method has a smaller adverse impact on the storage stability and workability of WSAE,and a larger enhancement on the high-temperature performance,rheological property and thermal stability of SBRE residue,which is thus recommended to modify SBRE.

关键词： Waterborne epoxy resin SBR modified asphalt emulsion Workability Rheological property Temperature sensitivity Compatibility evaluation

Multiorgan dysfunction syndrome due to high-dose cantharidin poisoning:A case report

在线全文

学校读者我要写书评

暂无评论

World Journal of Clinical Cases 2024年第12期12卷 2074-2078页

作者： Wan-Ling Xu Wen-Jing Tang Wei-ying yang Li-Chao Sun ze-Qun Zhang Wei Li Xiu-Xian Zang Department of Emergency Medicine First Hospital of Jilin UniversityChangchun 130021Jilin ProvinceChina Department of Chinese Traditional Medicine First Hospital of Jilin UniversityChangchun 130021Jilin ProvinceChina

BACKGROUND This report delves into the diagnostic and therapeutic journey undertaken by a patient with high-dose cantharidin poisoning and multiorgan dysfunction syndrome(MODS).Particular emphasis is placed on the comprehensive elucidation of the clinical manifestations of high-dose cantharidin poisoning,the intricate path to diagnosis,and the exploration of potential underlying mechanisms.CASE SUMMARY A patient taking 10 g of cantharidin powder orally subsequently developed MODS.The patient was treated with supportive care,fluid hydration and antibiotics,and hemoperfusion and hemofiltration therapy for 24 h and successfully recovered 8 d after hospital admission.Cantharidin poisoning can cause lifethreatening MODS and is rare clinically.This case underscores the challenge in diagnosis and highlights the need for early clinical differentiation to facilitate accurate assessment and prompt intervention.CONCLUSION This article has reported and analyzed the clinical data,diagnosis,treatment,and prognosis of a case of high-dose cantharidin poisoning resulting in MODS and reviewed the relevant literature to improve the clinical understanding of this rare condition.

关键词： Cantharidin Poisoning Multiorgan dysfunction syndrome Clinical treatment and management Case report

Preface to the special topic on metals and their compounds for lithium ion/metal batteries

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Tungsten 2024年第1期6卷 162-163页

作者： ying-ze Song Wen-Long Cai Gao-Ran Li State Key Laboratory of Environment-Friendly Energy Materials Southwest University of Science and TechnologyMianyang 621010China College of Materials Science and Engineering Sichuan UniversityChengdu 610064China School of Materials Science and Engineering Nanjing University of Science and TechnologyNanjing 210094China

The fast development of electronics and electric devices has inspired the practical application of lithium ion/metal batteries.Along this line,the metals and their compounds as electrode materials as well as the corresponding mechanism for energy storage have gained extensive international attention.The as-organized special topic focuses on W,Mo,Co,Zr,Hf,Re,Ta,Nb,V-based metals and their compounds for lithium ion/metal batteries.This special topic involves four reviews and four research papers totally,providing the latest advances of transition metals and their related compounds for rechargeable lithium ion/metal batteries.

关键词： lithium metals gained