检索结果-南通市图书馆

Chinese Medical Journal 2021年第16期134卷 1983-1987页

作者： Ben-Long Shi Yang Li ze-zhang zhu Sai-Hu Mao Zhen Liu Xu Sun Yong Qiu Department of Spine Surgery Affiliated Drum Tower Hospital of Nanjing University Medical SchoolNanjingJiangsu 210008China.

Background:Scoliosis secondary to neurofibromatosis type 1(NF1)in children aged10°/year)were *** age at modulation and the AV before and after modulation were *** with(n=18)and without rapid curve progression(n=10)we... 详细信息

Background:Scoliosis secondary to neurofibromatosis type 1(NF1)in children agedze high-risk indicators of rapid curve ***:Children with EOS due to NF1 who underwent bracing treatment from 2010 to 2017 were retrospectively *** angle velocity(AV)at each visit was calculated,and patients with rapid curve progression(AV of>10°/year)were *** age at modulation and the AV before and after modulation were *** with(n=18)and without rapid curve progression(n=10)were statistically ***:Twenty-eight patients with a mean age of 6.5±1.9 years at the initial visit were *** mean Cobb angle of the main curve was 41.7°±2.4°at the initial visit and increased to 67.1°±8.6°during a mean follow-up of 44.1±8.5 *** overall AV was 6.6°±2.4°/year for all *** the last follow-up,all patients presented curve progression of>5°,and 20(71%)patients had progressed by>20°.Rapid curve progression was observed in 18(64%)patients and was associated with younger age at the initial visit and a higher incidence of modulation change during follow-up(t=2.868,P=0.008 and10°/year is associated with younger age at the initial visit,and modulation change indicated the occurrence of the rapid curve progression phase.

关键词： Bracing treatment Early-onset scoliosis Modulation Neurofibromatosis type 1 Rapid curve progression

Effect of dynamic loading orientation on fracture properties of surrounding rocks in twin tunnels

在线全文

学校读者我要写书评

暂无评论

Journal of Rock Mechanics and Geotechnical Engineering 2024年第2期16卷 393-409页

作者： ze Deng Zheming zhu Lei Zhou Leijun Ma Jianwei Huang Yao zhang Key Laboratory of Deep Earth and Engineering(Ministry of Education) College of Architecture and EnvironmentSichuan UniversityChengdu610065China Failure Mechanics and Engineering Disaster Prevention Key Laboratory of Sichuan Province College of Architecture and EnvironmentSichuan UniversityChengdu610065China Institute for Disaster Management and Reconstruction Sichuan UniversityChengdu610065China

For expedited transportation,vehicular tunnels are often designed as two adjacent tunnels,which frequently experience dynamic stress waves from various orientations during blasting *** analyze the impact of dynamic loading orientation on the stability of the twin-tunnel,a split Hopkinson pressure bar(SHPB)apparatus was used to conduct a dynamic test on the twin-tunnel *** two tunnels were rotated around the specimen’s center to consider the effect of dynamic loading ***-DYNA software was used for numerical simulation to reveal the failure properties and stress wave propagation law of the twin-tunnel *** findings indicate that,for a twin-tunnel exposed to a dynamic load from different orientations,the crack initiation position appears most often at the tunnel corner,tunnel spandrel,and tunnel *** the impact direction is created by a certain angle(30°,45°,60°,120°,135°,and 150°),the fractures are produced in the middle of the line between the left tunnel corner and the right tunnel *** the impact loading angle(a)is 90°,the tunnel sustains minimal damage,and only tensile fractures form in the surrounding *** orientation of the impact load could change the stress distribution in the twin-tunnel,and major fractures are more likely to form in areas where the tensile stress is concentrated.

关键词： Twin-tunnel Dynamic load Split Hopkinson pressure bar(SHPB) Fracture mode Stress distribution Displacement field distribution

Ultrasound-triggered piezocatalytic composite hydrogels for promoting bacterial-infected wound healing

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Bioactive Materials 2023年第6期24卷 96-111页

作者： Dun Liu Lei Li Ben-Long Shi Bo Shi Ming-Ding Li Yong Qiu Di Zhao Qun-Dong Shen ze-zhang zhu Division of Spine Surgery Department of Orthopedic SurgeryAffiliated Drum Tower HospitalMedical School of Nanjing UniversityNanjing210008China Department of Polymer Science and Engineering Key Laboratory of High-Performance Polymer Materials and Technology of MOESchool of Chemistry and Chemical EngineeringNanjing UniversityNanjing210023China Institute of Brain Science and Disease School of Basic MedicineQingdao UniversityQingdaoShandong266001China

Wound healing has become one of the basic issues faced by the medical community because of the susceptibility of skin wounds to bacterial *** such,it is highly desired to design a nanocomposite hydrogel with excellent antibacterial activity to achieve high wound closure ***,based on ultrasound-triggered piezocatalytic therapy,a multifunctional hydrogel is designed to promote bacteria-infected wound *** ultrasonic vibration,the surface of barium titanate(BaTiO_(3),BT)nanoparticles embedded in the hydrogel rapidly generate reactive oxygen species(ROS)owing to the established strong built-in electric field,endowing the hydrogel with superior antibacterial *** modality shows intriguing advantages over conventional photodynamic therapy,such as prominent soft tissue penetration ability and the avoidance of serious skin phototoxicity after systemic administration of ***,the hydrogel based on N-[tris(hydroxymethyl)methyl]acrylamide(THM),N-(3-aminopropyl)methacrylamide hydrochloride(APMH)and oxidized hyaluronic acid(OHA)exhibits outstanding self-healing and bioadhesive properties able to accelerate full-thickness skin wound ***,compared with the widely reported mussel-inspired adhesive hydrogels,OHA/THM-APMH hydrogel due to the multiple hydrogen bonds from unique tri-hydroxyl structure overcomes the shortage that catechol groups are easily oxidized,giving it long-term and repeatable adhesion ***,this hybrid hydrogel confines BT nanoparticles to wound area and locally induced piezoelectric catalysis under ultrasound to eradicate bacteria,markedly improving the therapeutic biosafety and exhibits great potential for harmless treatment of bacteria-infected tissues.

关键词： Multifunctional hydrogels Bioadhesiveness Self-healing Antibacterial ability Piezocatalytic therapy

Solar evaporation for simultaneous oil-water separation and electricity generation with Janus wood-based absorbers

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Frontiers of Environmental Science & Engineering 2024年第2期18卷 13-23页

作者： Yue Yang ze Fu Qi zhang Jiangsu Key Laboratory of Chemical Pollution Control and Resources Reuse School of Environmental and Biological EngineeringNanjing University of Science&TechnologyNanjing 210094China Key Laboratory of Industrial Ecology and Environmental Engineering(Ministry of Education) School of Environmental Science and TechnologyDalian University of TechnologyDalian 116024China National Laboratory of Solid State Microstructures Collaborative Innovation Center of Advanced MicrostructuresCollege of Engineering and Applied SciencesKey Laboratory of Intelligent Optical Sensing and Manipulation(Ministry of Education)Jiangsu Key Laboratory of Artificial Functional MaterialsNanjing UniversityNanjing 210093China

Oily wastewater from ocean oil spills endangers marine ecosystems and human health. Therefore, developing an effective and sustainable solution for separating oil-water mixtures is urgent. Interfacial solar photothermal evaporation is a promising approach for the complete separation of two-phase mixtures using only solar energy. Herein, we report a carbonized wood-based absorber with Janus structure of comprising a hydrophobic top-layer and an oleophobic bottom-layer for simultaneous solar-driven oil-water separation and electricity generation. Under sunlight irradiation, the rapid evaporation of seawater will induce a separation of oil-water mixtures, and cause a high salt concentration region underlying the interface, while the bottom “bulk water” maintains in a low salt concentration, thus forming a salinity gradient. Electricity can be generated by salinity gradient power. Therefore, oil-water separation efficiency of > 99% and derived extra electricity power of ~0.1 W/m2 is achieved under solar radiation, demonstrating the feasibility of oil-water separation and electricity production synchronously directly using solar energy. This work provides a green and cost-effective path for the separation of oil-water mixtures.

关键词： Oily wastewater Carbonized wood Salinity gradient Electricity generation Solar irradiation

Cascade utilization of full spectrum solar energy for achieving simultaneous hydrogen production and all-day thermoelectric conversion

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第9期96卷 318-327页

作者： Tuo zhang Liang Dong Baoyuan Wang Jingkuo Qu Xiaoyuan Ye Wengao zeng ze Gao Bin zhu Ziying zhang Xiangjiu Guan Liejin Guo International Research Center for Renewable Energy(IRCRE) State Key Laboratory of Multiphase Flow in Power EngineeringXi’an Jiaotong UniversityXi’an 710049ShaanxiChina

Solar-driven photocatalytic water/seawater splitting holds great potential for green hydrogen ***,the practical application is hindered by the relatively low conversion efficiency resulting from the inadequate utilization of solar spectrum with significant waste in the form of ***,current equipment struggles to maintain all-day operation subjected to the lack of light during ***,a novel hybrid system integrating photothermal catalytic(PTC)reactor,thermoelectric generator(TEG),and phase change materials(PCM)was proposed and designed(named as PTC-TEG-PCM)to address these challenges and enable simultaneous overall seawater splitting and 24-hour power *** PTC system effectively maintains in an optimal temperature range to maximize photothermal-assisted photocatalytic hydrogen *** TEG component recycles the low-grade waste heat for power generation,complementing the shortcoming of photocatalytic conversion and achieving cascade utilization of full-spectrum solar ***,exceptional thermal storage capability of PCM allow for the conversion of released heat into electricity during nighttime,contributing significantly to the overall power output and enabling PTC-TEG-PCM to operate for more than 12 h under the actual *** to traditional PTC system,the overall energy conversion efficiency of the PTC-TEG-PCM system can be increased by∼500%,while maintaining the solar-to-hydrogen *** advancement of this novel system demonstrated that recycling waste heat from the PTC system and utilizing heat absorption/release capability of PCM for thermoelectric application are effective strategies to improve solar energy *** flexible parameter designing,PTC-TEG-PCM can be applied in various scenarios,offering high efficiency,stability,and sustainability.

关键词： Hybrid solar energy conversion system Photocatalytic overall seawatersplitting Thermoelectric power generation Phase change materials All-day operation

Integrated Active Suspension and Anti-Lock Braking Control for Four-Wheel-Independent-Drive Electric Vehicles

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Mechanical Engineering 2024年第1期37卷 87-98页

作者： ze Zhao Lei zhang Xiaoling Ding Zhiqiang zhang Shaohua Li Liang Gu National Engineering Research Center for Electric Vehicles Beijing Institute of TechnologyBeijing 100081China State Key Laboratory of Mechanical Behavior and System Safety of Traffic Engineering Structures Shijiazhuang Tiedao UniversityShijiazhuang 050043China

This paper presents an integrated control scheme for enhancing the ride comfort and handling performance of a four-wheel-independent-drive electric vehicle through the coordination of active suspension system(ASS)and anti-lock braking system(ABS).First,a longitudinal-vertical coupled vehicle dynamics model is established by integrating a road input *** the coupling mechanisms between longitudinal and vertical vehicle dynamics are *** ASS-ABS integrated control system is proposed,utilizing an H∞controller for ASS to optimize load transfer effect and a neural network sliding mode control for ABS ***,the effectiveness of the proposed control scheme is evaluated through comprehensive tests conducted on a hardware-in-loop(HIL)test *** HIL test results demonstrate that the proposed control scheme can significantly improve the braking performance and ride comfort compared to conventional ABS control methods.

关键词： Four-wheel-independent-drive electric vehicles Active suspension system(ASS) Anti-lock braking system(ABS) Vertical-longitudinal vehicle dynamics

Micro defects formation and dynamic response analysis of steel plate of quasi-cracking area subjected to explosive load

在线全文

学校读者我要写书评

暂无评论

Defence Technology（防务技术） 2024年第1期31卷 580-593页

作者： Zheng-qing Zhou ze-chen Du Xiao Wang Hui-ling Jiang Qiang Zhou Yu-long zhang Yu-zhe Liu Pei-ze zhang Research Institute of Macro-Safety Science University of Science and TechnologyBeijing100083China School of Civil and Resource Engineering University of Science and Technology BeijingBeijing100083China School of Mechanical Engineering Nantong UniversityNantong226019China China North Industry Advanced Technology Generalization Institute Beijing100089China China Academy of Ordnance Science China

As the protective component,steel plate had attracted extensive attention because of frequently threats of explosive *** this paper,the evolution of microstructure and the mechanism of damage in the quasi-cracking area of steel plate subjected to explosive load were discussed and the relationships between micro defects and dynamic mechanical response were *** the explosion experiment,five observation points were selected equidistant from the quasi-cracking area of the section of the steel plate along the thickness direction,and the characteristics of micro defects at the observation points were analyzed by optical microscope(OM),scanning electron microscope(SEM) and electron backscattered diffraction(EBSD).The observation result shows that many slip bands(SBs) appeared,and the grain orientation changed obviously in the steel plate,the two were the main damage types of micro *** addition,cracks,peeling pits,grooves and other lager micro defects were appeared in the lower area of the *** stress parameters of the observation points were obtained through an effective numerical *** mechanism of damage generation and crack propagation in the quasicracking area were clarified by comparing the specific impulse of each observation point with the corresponding micro *** result shows that the generation and expansion of micro defects are related to the stress area(*** upper compression area,the neutral plane area,and the lower tension area).The micro defects gather and expand at the grain boundary,and will become macroscopic damage under the continuous action of tensile ***,the micro defects at the midpoint of the section of the steel plate in the direction away from the explosion center(*** horizontal direction) were also *** was found that the specific impulse at these positions were much smaller than that in the thickness direction,the micro defects were only SBs and a few micro cracks,and the those decrea

关键词： Explosive load Quasi-cracking area Micro defects Steel plate Dynamic response Numerical simulation

Injection molding of highly filled microcrystalline cellulose/polycaprolactone composites with the aid of reversible Diels-Alder reaction

在线全文

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2024年第3期170卷 246-254页

作者： ze Pu Wang WenHong Ruan MinZhi Rong MingQiu zhang Key Laboratory for Polymeric Composite and Functional Materials of MOE GD HPPC LabIGCMESchool of ChemistrySun Yat-Sen UniversityGuangzhou 510275China

To tackle the challenge of producing highly filled polymer composites using the traditional injection molding technique,which is characterized by the fairly high melt viscosity that makes mold filling difficult,the authors propose a solution based on dynamic covalent *** demonstrated by the proof-of-concept experiments,the 4-arm starshaped polycaprolactone(PCL)oligomers and microcrystalline cel-lulose(MCC)are crosslinked by the reversible Diels-Alder(DA)*** flowability of the compounds greatly decreases due to the dissociation of the intercomponent DA bonds at the retro-reaction tempera-ture,and the networked architecture is reconstructed during cooling as a result of the forward DA ***,the high-loading MCC fillers are well distributed in the matrix and covalently bonded to the nearby PCL,forming a striking contrast to the control in which linear PCL acts as the *** DA bonds crosslinked biodegradable PCL composites exhibit decent mechanical strength(20.7 MPa)even at the MCC fraction of 65 wt%,which is superior to those(5-12.2 MPa)of the highly filled PCL composites(with filler contents of 50-63.8 wt%)reported so *** proposed approach has sufficient expansibility for the fabrication of the highly filled polymer composites constructed by other types of matrix and fillers.

关键词： Polymer composites Microcrystalline cellulose Polycaprolactone Injection molding Dynamic reversible chemistry

Multiscale spatiotemporal meteorological drought prediction:A deep learning approach

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Advances in Climate Change Research 2024年第2期15卷 211-221页

作者： Jia-Li zhang Xiao-Meng HUANG Yu-ze SUN Department of Earth System Science Ministry of Education Key Laboratory for Earth System ModellingInstitute for Global Change StudiesTsinghua UniversityBeijing 100084China

Reliable monitoring and thorough spatiotemporal prediction of meteorological drought are crucial for early warning and decision-making regarding drought-related *** utilisation of multiscale methods is effective for a comprehensive evaluation of drought occurrence and progression,given the complex nature of meteorological ***,the nonlinear spatiotemporal features of meteorological droughts,influenced by various climatological,physical and environmental factors,pose significant challenges to integrated prediction that considers multiple indicators and time *** address these constraints,we introduce an innovative deep learning framework based on the shifted window transformer,designed for executing spatiotemporal prediction of meteorological drought across multiple *** formulate four prediction indicators using the standardized precipitation index and the standard precipitation evaporation index as core methods for drought definition using the ERA5 reanalysis *** indicators span time scales of approximately 30 d and one ***-term indicators capture more anomalous variations,whereas long-term indicators attain comparatively higher accuracy in predicting future *** focus on the East Asian region,notable for its diverse climate conditions and intricate terrains,to validate the model's efficacy in addressing the complexities of nonlinear spatiotemporal *** model's performance is evaluated from diverse spatiotemporal viewpoints,and practical application values are analysed by representative drought *** results substantiate the effectiveness of our proposed model in providing accurate multiscale predictions and capturing the spatiotemporal evolution characteristics of *** of the four drought indicators accurately delineates specific facets of the meteorological drought ***,three representative drought events,namely flash drought,sustained drought and severe drought,

关键词： Meteorological drought Spatiotemporal prediction Multiscale Swim transformer Deep learning

Thermally Conductive,Healable Glass Fiber Cloth Reinforced Polymer Composite based onβ-Hydroxyester Bonds Crosslinked Epoxy with Improved Heat Resistance

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of Polymer Science 2024年第5期42卷 643-654,I0009页

作者： Fang Chen Xiao-Yan Pang ze-Ping zhang Min-Zhi Rong Ming-Qiu zhang Key Laboratory for Polymeric Composite and Functional Materials of Ministry of Education GD HPPC LabIGCMESchool of ChemistrySun Yat-sen UniversityGuangzhou510275China Guangdong Provincial Laboratory of Chemistry and Fine Chemical Engineering Jieyang Center Jieyang515200China

To simultaneously endow thermal conductivity,high glass transition temperature(Tg)and healing capability to glass fiber/epoxy(GFREP)composite,dynamic crosslinked epoxy resin bearing reversibleβ-hydroxyl ester bonds was reinforced with boron nitride nanosheets modified glass fiber cloth(GFC@BNNSs).The in-plane heat conduction paths were constructed by electrostatic self-assembly of polyacrylic acid treated GFC and polyethyleneimine decorated ***,the GFC@BNNSs were impregnated with the mixture of lower concentration(3-glycidyloxypropyl)trimethoxysilane grafted BN micron sheets,3,4-epoxycyclohexylmethyl 3,4-epoxycyclohexanecarboxylate and hexahydro-4-methylphthalic anhydride,which accounted for establishing the through-plane heat transport pathways and avoiding serious deterioration of mechanical *** resultant GFREP composite containing less boron nitride particles(17.6 wt%)exhibited superior in-plane(3.29 W·m^(-1)·K^(-1))and through-plane(1.16 W·m^(-1)·K^(-1))thermal conductivities,as well as high Tg of 204℃(Tg of the unfilled epoxy=177℃).The reversible transesterification reaction enabled closure of interlaminar cracks within the composite,achieving decent healing efficiencies estimated by means of tensile strength(71.2%),electrical breakdown strength(83.6%)and thermal conductivity(69.1%).The present work overcame the disadvantages of conventional thermally conductive composites,and provided an efficient approach to prolong the life span of thermally conductive GFREP laminate for high-temperature resistant integrated circuit application.

关键词： Thermally conductive composites Boron nitride High-temperature resistance β-Hydroxyl ester bond Healing