检索结果-南通市图书馆

In-depth understanding of ionic liquid assisted perovskite film formation mechanism for two-step perovskite photovoltaics

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2022年第10期31卷 599-606,I0015页

作者： Fei Wang Patrick Wai-Keung Fong Zhiwei Ren Hai-Lun Xia Kang Zhou Kai Wang Jiajie zhu Xiaoxi Huang Xiao-Yuan Liu Hao Wang Yumeng Shi Haoran Lin quanyao zhu Gang Li Hanlin Hu Hoffman Institute of Advanced Materials Shenzhen PolytechnicShenzhen 518055GuangdongChina Department of Electronic and Information Engineering Research Institute for Smart Energy(RISE)The Hong Kong Polytechnic UniversityHong Kong 999077China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing School of Materials Science and EngineeringWuhan University of TechnologyWuhan 43007HubeiChina International Collaborative Laboratory of 2D Materials for Optoelectronics Science and Technology of Ministry of Education Institute of Microscale OptoelectronicsShenzhen UniversityShenzhen 518060GuangdongChina The Hong Kong Polytechnic University Shenzhen Research Institute Shenzhen 518057GuangdongChina Institute of Flexible Electronics Northwestern Polytechnical UniversityXi’an 710072ShannxiChina School of Physics Science and Engineering Tongji UniversityShanghai 200092China

Ionic liquids(ILs)have been widely applied in the one-step fabrication of perovskite with noticeable enhancement in the device ***,in-depth mechanism of ionic-liquid-assisted perovskite film formation is not well understood for also important two-step perovskite fabrication method,with better control of crystallization *** this work,we introduced ionic liquid methylammonium formate(MAFa)into organic salt to produce perovskite film via a two-step *** investigations on the influence of MAFa on the perovskite thin film formation mechanism were *** liquid is shown to assist lowering the perovskite formation enthalpy upon the density functional theory(DFT)calculation,leading to an accelerated crystallization process evidenced by in-situ UV-Vis absorption measurement.A gradient up-down distribution of ionic liquid has been confirmed by timeof-flight ***,besides the surface passivation,we found the HCOO-can diffuse into the perovskite crystals to fill up the halide vacancies,resulting in significant reduction of trap *** perovskite films with significantly larger grains and less defect density were prepared with the help of MAFa IL,and the corresponding device efficiency over 23%was obtained by two-step process with remarkably improved *** research work provides an efficient strategy to tune the morphology and opto-electronic properties of perovskite materials via ionic-liquid-assisted two-step fabrication method,which is beneficial for upscaling and application of perovskite photovoltaics.

关键词： Halide vacancies Perovskite solar cells Two-step method Ionic liquid

Ionic liquid engineering enabled in-plane orientated 1D perovskite nanorods for efficient mixed-dimensional perovskite photovoltaics

在线全文

学校读者我要写书评

暂无评论

InfoMat 2023年第8期5卷 81-93页

作者： Fei Wang Dawei Duan Kang Zhou YZBXue Xiao Liang Xianfang Zhou Chuangye Ge Chao Zhou Jin Xiang Jiajie zhu quanyao zhu Haoran Lin Yumeng Shi Yonghua Chen Gang Li Hanlin Hu Hoffmann Institute of Advanced Materials Shenzhen PolytechnicShenzhenthe People's Republic of China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing School of Materials Science and EngineeringWuhan University of TechnologyWuhanthe People's Republic of China Oxford Instruments Technology(Shanghai)Co.Ltd. Shanghaithe People's Republic of China International Collaborative Laboratory of 2D Materials for Optoelectronics Science and Technology of Ministry of Education Institute of Microscale OptoelectronicsShenzhen UniversityShenzhenthe People's Republic of China School of Physics Science and Engineering Tongji UniversityShanghaithe People's Republic of China Key Laboratory of Flexible Electronics(KLoFE)&Institute of Advanced Materials(IAM) School of Flexible Electronics(Future Technologies)Nanjing Tech University(NanjingTech)Nanjingthe People's Republic of China Department of Electronic and Information Engineering Research Institute for Smart Energy(RISE)The Hong Kong Polytechnic UniversityKowloonHong Kongthe People's Republic of China

Mixed-dimensional engineering of perovskite material has been demonstrated as a facile and promising strategy to improve both photovoltaic performance and long-term stability of perovskite solar cells(PSCs).In this study,we report an in-plane preferred orientation of 1D perovskite induced by an ionic liquid(IL)of 1-(3-cyanopropyl)-3-methylimidazolium chloride(CPMIMCl)for the first time via sequential deposition approach,leading to a mixed dimensional perovskite thin *** generated one-dimensional(1D)CPMIMPbI3 with in-plane orientation resides at the grain boundaries of three-dimensional(3D)perovskite can be appreciably observed from the morphology level,leading to creation of high-quality films with large grain size with more efficient defect ***,the dispersion of IL in the bulk phase of perovskite material allows for the formation of 1D perovskite for multiple level passivation to inhibit non-radiative recombination and optimize carrier *** IL engineering strategy not only yields a mixed-dimensional perovskite heterostructure with in-plane orientation 1D perovskite nano-rods but also significantly improves the opto-electronic property with suppressed trap *** a result,the CPMIMCl-treated PSCs show an enhanced photovoltaic performance with a champion power conversion efficiency(PCE)up to 24.13%.More importantly,benefiting from the hydrophobicity of formed 1D perovskite and defects suppression,the corresponding PSC demonstrates an excellent longterm stability and maintain 97.1%of its pristine PCE at 25C under 50%RH condition over 1000 *** research provides an innovative perspective for employing the low dimensional engineering to optimize the performance and stability of photovoltaic devices.

关键词： 1D/3D perovskite ionic liquid perovskite solar cells stability

Hot Mixing Behavior and Curing Process of Epoxy Asphalt

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Wuhan University of Technology(Materials Science) 2020年第3期35卷 605-610页

作者： LI Huawei WEI Wei ZHANG Chao XU Feifan LI Xin JING Peng zhu quanyao DING Qingjun YAN Boxiang School of Materials Science and Engineering Wuhan University of TechnologyWuhan 430070China Department of Physics Changji UniversityChangji 831100China State Key Laboratory of Sil-icate Engineering Center Wuhan University of TechnologyWuhan 430070China

A new hot mixed epoxy asphalt system was developed. The reaction process of epoxy resin was characterized by Fourier transform infrared spectroscopy (FTIR). The viscosity was investigated by Brinell viscometer when epoxy resin was mixed with asphalt. The glass transition temperature (Tg), homogeneity, thermal stability and viscoelasticity of epoxy asphalt were analyzed by differential scanning calorimetry (DSC), metallographic microscope, thermogravimetric (TG) and dynamic mechanical analysis (DMA). The results showed that the viscosity of epoxy resin modified asphalt reached 1000 mPa·s for more than 180 minutes at 180 ℃, while the best construction process is mixing at 180 ℃ for 2 hours and curing at 60 ℃ for 4 days. The particle size of asphalt is less than 50 μm. In addition, the mechanical properties of the materials are uniform within the specified pavement thickness.

关键词： epoxy asphalt FTIR curing process viscosity dispersed

聚合物/过渡金属氧化物纳米复合材料在电致变色性能上的研究进展

在线全文

学校读者我要写书评

暂无评论

材料导报 2006年第3期20卷 48-51页

作者：朱泉峣靳艾平陈文武汉理工大学材料科学与工程学院武汉430070

聚合物/过渡金属氧化物纳米复合材料是近年来引人注目的一种新型功能性材料。介绍了这类材料的种类和制备方法,综述了聚合物/过渡金属氧化物的电致变色性能,探讨了聚合物/过渡金属氧化物的电致变色机理。

关键词：聚合物过渡金属氧化物电致变色纳米复合材料

交联聚苯乙烯表面CF4等离子体改性及其真空沿面闪络性能

在线全文

学校读者我要写书评

暂无评论

高电压技术 2018年第12期44卷 3857-3864页

作者：万方超许飞凡魏伟王钧朱泉峣武汉理工大学材料科学与工程学院

绝缘材料的真空沿面闪络性能是目前电气工程领域的研究热点,为此采用大气压介质阻挡放电技术,对交联聚苯乙烯(CLPS)进行CF4等离子体表面改性。通过静态水接触角、原子力显微镜(AFM)、X射线光电子能谱(XPS)等技术,分析改性前后CLPS的表... 详细信息

绝缘材料的真空沿面闪络性能是目前电气工程领域的研究热点,为此采用大气压介质阻挡放电技术,对交联聚苯乙烯(CLPS)进行CF4等离子体表面改性。通过静态水接触角、原子力显微镜(AFM)、X射线光电子能谱(XPS)等技术,分析改性前后CLPS的表面特性;同时测量改性前后的真空沿面闪络性能,讨论了表面微观形貌在纳米尺度上的变化及表面氟含量与闪络电压的关系。结果表明:CF4等离子体可以改变材料表面微观形貌并对表面进行氟化,使得CLPS真空沿面闪络电压提高50%以上。表面高度特征参数Ra随改性时间增加先增加后减小,引入氟以单氟接枝碳原子(C—F)的形式存在,纳米尺度下增加Ra以及在表面分子链中引入C—F键可提高CLPS真空沿面闪络电压。

关键词：交联聚苯乙烯 CF4等离子体表面微观形貌真空沿面闪络表面氟化

TiO_2-CeO_2离子储存电极薄膜的制备与性能研究

在线全文

学校读者我要写书评

暂无评论

稀有金属 2007年第1期31卷 72-76页

作者：靳艾平陈文朱泉峣杨莹武汉理工大学材料科学与工程学院湖北武汉430070

采用溶胶-凝胶技术,以Ti(OC4H9)4和Ce(NO3)3.6H2O为前驱体制备了Ti/Ce不同摩尔配比的TiO2-CeO2复合薄膜。运用X射线衍射(XRD)、扫描电镜(SEM)、紫外-可见光吸收光谱、循环伏安法和电化学交流阻抗等分析了其结构和性能。实验结果表明,当T... 详细信息

采用溶胶-凝胶技术,以Ti(OC4H9)4和Ce(NO3)3.6H2O为前驱体制备了Ti/Ce不同摩尔配比的TiO2-CeO2复合薄膜。运用X射线衍射(XRD)、扫描电镜(SEM)、紫外-可见光吸收光谱、循环伏安法和电化学交流阻抗等分析了其结构和性能。实验结果表明,当Ti/Ce摩尔比为1∶1时,薄膜具有致密的非晶态显微结构;在Li+离子注入/脱出过程中,薄膜有较快的电化学响应和较高的电荷容量,在20 mV.s-1的扫描速率下,注入Li+离子的扩散系数约为1.50×10-11cm2.s-1,并且第20次稳定循环的阴极和阳极电荷密度分别为12和9.5 ***-2,表明薄膜具有良好的循环可逆性。电化学和光学测试表明该薄膜可以作为电致变色装置的对电极。

关键词：溶胶-凝胶技术二氧化钛二氧化铈薄膜离子储存电极

在线全文

学校读者我要写书评

暂无评论

复合材料力矩管扭转性能的研究

武汉大学学报（理学版） 2011年第2期57卷 175-178页

作者：吴非王翔蔡浩鹏朱泉尧武汉理工大学材料科学与工程学院湖北武汉430070

为了研究缠绕角度对玻璃纤维增强复合材料管(GFRP)扭转性能的影响和给在实际应用中提供依据,本文研究采用湿法缠绕成型工艺制得了具有不同缠绕角度的GFRP管.通过测试缠绕管的破坏扭矩来分析影响复合材料缠绕管扭转性能的各项因素,并与... 详细信息

为了研究缠绕角度对玻璃纤维增强复合材料管(GFRP)扭转性能的影响和给在实际应用中提供依据,本文研究采用湿法缠绕成型工艺制得了具有不同缠绕角度的GFRP管.通过测试缠绕管的破坏扭矩来分析影响复合材料缠绕管扭转性能的各项因素,并与理论计算值进行了比较.研究结果表明,缠绕管扭转破坏的主要形式为面内剪切破坏.当缠绕角度在25°至60°范围内变化时,随着缠绕角度的增大,复合材料缠绕管的壁厚逐渐减小,抗剪性能逐渐减弱且扭转破坏形式有分层情况出现.当缠绕角是25°时,缠绕管的抗扭性能最佳,最大扭矩为118N.m,对应的扭转强度为209MPa.

关键词：复合材料缠绕管扭转性能剪切强度破坏扭矩

Dynamic Mechanical and Thermal Properties of Cross-linked Polystyrene/Glass Fiber Composites

在线全文

学校读者我要写书评

暂无评论

Journal of Wuhan University of Technology(Materials Science) 2010年第5期25卷 780-784页

作者：朱泉峣陈文 School of Materials Science and Engineering Wuhan University of Technology State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology

Cross-linked polystyrene/glass fiber composites were fabricated using cross-linked polystyrene （CLPS） as matrix and E-glass fiber as the reinforcement. Surfaces of E-glass fibers were modified by vinyl triethoxysilane （VTES）, vinyl trimethoxysilane （VTMS） and γ-methacryloylpropyl trimethoxysilane （MPS）. The treated glass fibers were analyzed by fourier transform infrared spectroscopy （FTIR）. Dynamic mechanical thermal analysis （DMTA） and thermo-gravimetric analysis （TGA） were employed to investigate the effect of glass fibers surface modification on viscoelastic behavior and thermal properties. The morphology of fracture surfaces of various composites was observed by scanning electron microscopy （SEM）. The results revealed that these coupling agents were connected to the surfaces of the fibers by chemical bonding. Dynamic mechanical properties as well as thermal stability of the composites were improved considerablely, but to varying degrees depending on the fiber modification. The diversities of improvement of properties were attributed to the different interfacial adhesion between CLPS matrix and the glass fibers.

关键词： polymer-matrix composite cross-linked polystyrene (CLPS) fiber/matrix bond dynamic mechanical thermal analysis.

在线全文

学校读者我要写书评

暂无评论

真空中聚苯乙烯交联材料的沿面闪络特性

强激光与粒子束 2012年第8期24卷 1867-1870页

作者：朱泉峣杨清俞悦李兆龙王勐刘瑜陈文武汉理工大学材料科学与工程学院武汉430070 中国工程物理研究院流体物理研究所四川绵阳621900

搭建了真空沿面闪络实验平台,在实验平台上对聚苯乙烯交联材料进行了真空沿面闪络性能测试,探讨了材料的真空沿面闪络电压强度与材料结构、材料内部微量杂质的关系。实验结果表明:随着聚苯乙烯材料交联程度的增加,其真空沿面闪络电压强... 详细信息

搭建了真空沿面闪络实验平台,在实验平台上对聚苯乙烯交联材料进行了真空沿面闪络性能测试,探讨了材料的真空沿面闪络电压强度与材料结构、材料内部微量杂质的关系。实验结果表明:随着聚苯乙烯材料交联程度的增加,其真空沿面闪络电压强度先增加后减少;聚苯乙烯交联材料分子链结构对其真空沿面闪络电压强度有重要影响;材料的真空沿面闪络电压强度还与交联材料内部异质分子数量有关系,微量异质结构的分子将导致沿面闪络电压强度的下降。

关键词：聚苯乙烯交联结构沿面闪络真空脉冲电压