检索结果-南通市图书馆

Conceptual design of a 714-MHz RFQ for compact proton injectors and development of a new tuning algorithm on its aluminium prototype

在线全文

学校读者我要写书评

暂无评论

Nuclear Science and Techniques 2024年第1期35卷 45-58页

作者： Yi-Xing Lu wen-Cheng Fang yu-Sen Guo Zhen-Tang zhao Shanghai Institute of Applied Physics Chinese Academy of Sciences Shanghai 201800China University of Chinese Academy of Sciences Beijing 101408China Shanghai Advanced Research Institute Chinese Academy of Sciences Shanghai 201204China Shanghai Key Laboratory of Cryogenics&Superconducting RF Technology Shanghai 201800China ShanghaiTech University Shanghai 201210China

Radio frequency quadrupoles(RFQs),which are crucial components of proton injectors,significantly affect the performance of proton accelerator facilities.An RFQ with a high frequency of 714 MHz dedicated to compact proton injectors for medi-cal applications is designed in this study.The RFQ is designed to accelerate proton beams from 50 keV to 4 MeV within a short length of 2 m and can be matched closely with the downstream drift tube linac to capture more particles through a preliminary optimization.To develop an advanced RFQ,challenging techniques,including fabrication and tuning method,must be evaluated and verified using a prototype.An aluminium prototype is derived from the conceptual design of the RFQ and then redesigned to confirm the radio frequency performance,fabrication procedure,and feasibility of the tuning algorithm.Eventually,a new tuning algorithm based on the response matrix and least-squares method is developed,which yields favorable results based on the prototype,i.e.,the errors of the dipole and quadrupole components reduced to a low level after several tuning iterations.Benefiting from the conceptual design and techniques obtained from the prototype,the formal mechanical design of the 2-m RFQ is ready for the next manufacturing step.

关键词： Compact proton injector RFQ IH-DTL High gradient Tuning

Benefit-Risk Assessment of Chinese Medicine Injections for Primary Liver Cancer Based on Multi-criteria Decision Analysis

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Integrative Medicine 2024年第6期30卷 559-564页

作者： ZHANG Rong-rong SHAO Ming-yi FU yu zhao Rui-xia WANG Jing-wen FANG yu-xuan The First Clinical Medical College of Henan University of Traditional Chinese Medicine Zhengzhou450046China Personal Department the First Affiliated Hospital of Henan University of Chinese MedicineZhengzhou450000China Scientific Research Department the First Affiliated Hospital of Henan University of Chinese MedicineZhengzhou450000China Digestive Department the First Affiliated Hospital of Henan University of Chinese MedicineZhengzhou450000China

ObjectiveTo evaluate the benefit-risk of 3 commonly used Chinese medicine injections, Aidi Injection (ADI), Cinobufagin Injection (CINI) and Compound Kushen Injection (CKI), in the treatment of primary liver cancer (PLC), so as to provide a reference for clinical decision-making.MethodsRandomized controlled trials (RCTs) of ADI, CINI and CKI in the treatment of PLC published in the databases of China National Knowledge Infrastructure, Wanfang, China Science and Technology Journal Database, SinoMed, PubMed, Cochrane Library, and Web of Science were retrieved from January 2020 to October 2022. The data of benefit and risk indicators were combined to obtain the effect value. The multi-criteria decision analysis (MCDA) model was applied to build the decision tree. The benefit value, risk value and benefit risk value of the 3 injections in PLC treatment were calculated. Monte Carlo simulation was carried out to calculate the 95% confidence interval and probability of differences among the 3 injections, so as to optimize the evaluation results.ResultsA total of 71 RCTs were included. The benefit values of ADI, CINI and CKI combined with transcatheter arterial chemoembolization (TACE) were 42, 38 and 36, respectively. The risk values were 42, 25 and 37, respectively. The benefit risk values were 42, 31 and 37, respectively. The benefit risk differences of ADI vs. CINI, ADI vs. CKI, and CKI vs. CINI were 11 (−0.86, 17.75), 5 (−5.01, 11.09), and 6 (−1.87, 12.63), respectively. The probability that ADI superior to CINI, ADI superior to CKI, and CKI superior to CINI was 96.26%, 77.27%, and 92.62%, respectively.ConclusionBased on the results of MCDA model, CINI combined with TACE has the greatest risk in the treatment of the PLC. Considering the efficacy and safety, the possible priority of the 3 Chinese medicine injections combined with TACE in the treatment of PLC is ADI, CKI and CINI.

关键词： multi-criteria decision analysis benefit-risk assessment Chinese medicine injections primary livercancer

Enhanced thermoelectric and mechanical properties of Bi0.5Sb1.5Te3 alloy with dispersed yttrium oxide ceramic nanoparticles

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2024年第4期43卷 1758-1768页

作者： Cun-Cheng Li Ming-Wei Zhang Ji-Wu Xin Lei Wei wen-yu zhao School of Materials Science and Engineering Shandong University of Technology School of Electrical and Electronic Engineering Nanyang Technological University State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology

Reducing thermal conductivity while avoiding adverse interfacial reactions during sintering is crucial for improving the thermoelectric performance of Bi2Te3-based composites.Inert ceramic nanoparticles are good candidates for achieving this goal.In this study,we designed and prepared a series of p-type Bi0.5Sb1.5Te3nanocomposites decorated with Y2O3ceramic nanoparticles via ball-milling dispersion and spark-plasma sintering.Owing to the chemical stability of the ceramics,no traces of atomic doping or interfacial reactions were observed.Transport measurements revealed that the Y2O3nanoparticles distributed along the grain boundaries acted as energy-dependent carrier-filtering centers to improve the scattering parameter and Seebeck coefficient,contributing to the elevated power factor even with a decreased electrical conductivity.Moreover,the incorporated Y2O3nanoparticles and various defect structures they induced effectively strengthened the phonon scattering and suppressed the lattice thermal conductivity.Consequently,a peak figure of merit（ZT） of 1.23 at 313 K was achieved for 0.4%Y2O3/Bi0.5Sb1.5Te3,which is 13% higher than that of the matrix.In addition,the Vickers hardness of the composite material was 35% higher than that of the matrix.This study demonstrates the effectiveness of ceramic nanoparticles in synergistic ally improving the thermoelectric and mechanical properties,which may be further extended to other thermoelectric systems.

关键词： Bi 0.5 Sb 1.5 Te 3 alloy Y 2 O 3 ceramic nanoparticles Microstructures Thermoelectric performance Mechanical properties

Design study of charge-stripping scheme of heavy ion beams for HIAF-BRing

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Nuclear Science and Techniques 2024年第5期35卷 30-41页

作者： Jun-Jie Zhang Zhi-You Xu Jin-Quan Zhang wen-wen Ge Liang-Ting Sun Huan-yu zhao Institute of Modern Physics Chinese Academy of SciencesLanzhou 730000China School of Nuclear Science and Technology University of Chinese Academy of SciencesBeijing 100049China

Charge strippers play an essential role in heavy-ion accelerators by stripping the projectile ions to higher charge states to enhance the acceleration efficiency downstream of the stripper.In the high-energy mode of the booster ring(BRing)of the high-intensity heavy-ion accelerator facility,the pre-accelerated ions from the iLinac will be stripped by a carbon foil to higher charge states and then injected into the BRing.The key parameters of the stripper and stripped ions were calculated,and the influence of stripping on the beam quality was discussed.To get high stripping efficiencies,the foil thicknesses and resultant charge state distributions for the typical ions were determined by the code ETACHA.The equilibrium thickness was obtained for the U beam,while the stripper thicknesses for the Xe and Kr beams were determined based on a compromise between the stripped charge states and the stripping efficiency.The energy loss,energy straggling,and emittance growth due to stripping have a non-negligible impact on the transport of the stripped beams and the injection of the ring.Therefore,these parameters were simulated by GEANT4.In addition,the foil’s temperature evolution,which greatly affects the foil lifetime,was simulated by ANSYS.The maximum temperature of the foil bombarded by the U and Xe beams with the nominal parameters will exceed the safe value in terms of the impact of evaporation on the foil’s lifetime.Given the foil temperature constraint,the highest tolerable beam intensity and the injected ion number into the ring were derived for different beam sizes.The results of this paper will present important reference data for the optimization design and commissioning of the beamline and injection to the BRing for the stripped ions.

关键词： High-intensity heavy-ion accelerator facility Charge stripper Energy spread Thermal analysis Emittance growth Injection turns

On the two-layer high-level Green-Naghdi model in a general form

在线全文

学校读者我要写书评

暂无评论

Journal of Hydrodynamics 2024年第1期36卷 78-86页

作者： Bin-bin zhao Tian-yu Zhang Zhan Wang wen-yang Duan Alexander Chesnokov Natalia Shmakova College of Shipbuilding Engineering Harbin Engineering UniversityHarbin150001China Qingdao Innovation and Development Center of Harbin Engineering University Qingdao266000China Lavrentyev Institute of Hydrodynamics NovosibirskRussia

The traditional high-level Green-Naghdi(HLGN)model,which uses the polynomial as the shape function to approximate the variation of the horizontal-and vertical-velocity components along the vertical direction for each-fluid layer,can accurately describe the large-amplitude internal waves in a two-layer system for the shallow configuration(h_(2)/λ■1,h_(1)/λ■1).However,for the cases of the deep configuration(h_(2)/λ■1,h_(1)/λ=O(1)),higher-order polynomial is needed to approximate the variation of the velocity components along the vertical direction for the lower-fluid layer.This,however,introduces additional unknowns,leading to a significant increase in computational time.This paper,for the first time,derives a general form of the HLGN model for a two-layer fluid system,where the general form of the shape function is used during the derivation.After obtaining the general form of the two-layer HLGN equations,corresponding solutions can be obtained by determining the reasonable shape function.Large-amplitude internal solitary waves in a deep configuration are studied by use of two different HLGN models.Comparison of the two HLGN models shows that the polynomial as the shape function for the upper-fluid layer and the production of exponential and polynomial as the shape function for the lower-fluid layer is a good choice.By comparing with Euler’s solutions and the laboratory measurements,the accuracy of the two-layer HLGN model is verified.

关键词： High-level Green-Naghdi(HLGN)model general form internal waves deep configuration

Synergy between CSST galaxy survey and gravitational-wave observation: Inferring the Hubble constant from dark standard sirens

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Science China(Physics,Mechanics & Astronomy) 2024年第3期67卷 7-19页

作者： Ji-yu Song Ling-Feng Wang Yichao Li Ze-Wei zhao Jing-Fei Zhang wen zhao Xin Zhang Key Laboratory of Cosmology and Astrophysics(Liaoning)&College of Sciences Northeastern UniversityShenyang 110819China CAS Key Laboratory for Researches in Galaxies and Cosmology Department of AstronomyUniversity of Science and Technology of ChinaChinese Academy of SciencesHefei 230026China School of Astronomy and Space Sciences University of Science and Technology of ChinaHefei 230026China National Frontiers Science Center for Industrial Intelligence and Systems Optimization Northeastern UniversityShenyang 110819China Key Laboratory of Data Analytics and Optimization for Smart Industry(Ministry of Education) Northeastern Universty Shenyang 110819China

Gravitational waves(GWs) from compact binary coalescences encode the absolute luminosity distances of GW sources. Once the redshifts of GW sources are known, one can use the distance-redshift relation to constrain cosmological parameters. One way to obtain the redshifts is to localize GW sources by GW observations and then use galaxy catalogs to determine redshifts from a statistical analysis of redshift information of the potential host galaxies, commonly referred to as the dark siren method. The third-generation(3G) GW detectors are planned to work in the 2030s and will observe numerous compact binary coalescences.Using these GW events as dark sirens requires high-quality galaxy catalogs from future sky survey projects. The China Space Station Telescope(CSST) will be launched in 2024 and will observe billions of galaxies within a 17500 deg^(2) survey area with redshift up to z ~ 4, providing photometric and spectroscopic galaxy catalogs. In this work, we simulate the CSST galaxy catalogs and the 5-year GW data from the 3G GW detectors and combine them to infer the Hubble constant(H_(0)). Our results show that the measurement precision of H0could reach the sub-percent level, meeting the standard of precision cosmology. We conclude that the synergy between CSST and the 3G GW detectors is of great significance in measuring the Hubble constant.

关键词： CSST galaxy survey galaxy catalogs gravitational waves dark sirens the Hubble constant

Enhanced red luminescence of Ca_(3)Si_(2−x)M_(x)O_(7):Eu^(3+)(M=Al,P)phosphors via partial substitution of Si^(4+) for applications in white light-emitting diodes

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2024年第2期43卷 736-748页

作者： yu-Hao Ma Xi Gao wen-Tao Zhang Zhen-Rui Yang Zhou zhao Chen Qu College of Materials and Chemistry and Chemical Engineering Chengdu University of TechnologyChengdu610059China State Key Laboratory of Geohazard Prevention and Geoenvironment Protection Chengdu University of TechnologyChengdu610059China International Advanced Energy Science Research and Education Center Graduate School of Energy ScienceKyoto UniversityYoshida-HonmachiKyoto606-8501Japan

A red-emitting phosphor Ca_(2.91)Si_(2)O_(7):0.09Eu^(3+) with partial Al^(3+)/P^(5+) substitution on Si^(4+) was synthesized via a simple solid-state method,and the effects of the introduction of the M^(3+/5+)(M=Al,P)ions on the crystal structure and photoluminescence performance of Ca_(2.91)Si_(2−x)M_(x)O_(7):0.09Eu^(3+) phosphors were investigated.The X-ray diffraction(XRD),energy-dispersive X-ray spectroscopy(EDS),and X-ray photoelectron spectroscopy(XPS)results revealed that the structure of Ca_(3)Si_(2)O_(7) remained the same after the introduction of Al^(3+) and P^(5+) ions.The characteristic emission of Eu^(3+)-doped Ca_(3)Si_(2−x)M_(x)O_(7) phosphors exhibited two main peaks at 617 nm(red)and 593 nm(orange)under excitation at 394 nm,which originated from the^(5)D_(0)→^(7)F_(2)and^(5)D_(0)→^(7)F_(1) electron transitions of Eu^(3+) ions.After the partial substitution of Al^(3+) and P^(5+),the red emission intensities of the Ca_(2.91)Si_(2)O_(7):0.09Eu^(3+) phosphors were significantly enhanced by 1.88-and 1.42-fold,respectively,which is attributed to the crystal-field effect around Eu^(3+).Meanwhile,the luminescence intensities of the Ca_(2.91)Si_(1.96)Al_(0.04)O_(7):0.09Eu^(3+) and Ca_(2.91)Si_(1.94)P_(0.06)O_(7):0.09Eu^(3+) phosphors at 210℃ were 79.36%and 77.53%of those at 30°C,respectively,indicating their excellent thermal stability.Moreover,the as-prepared Ca_(2.91)Si_(1.96)Al_(0.04)O_(7):0.09Eu^(3+)and Ca_(2.91)Si_(1.94)P_(0.06)O_(7):0.09Eu^(3+) red-emitting phosphors were combined with a near-ultraviolet chip of 395 nm to fabricate red-light-emitting diode(LED)and white(w)-LED devices with excellent chromaticity features.In summary,Al^(3+)/P^(5+)-substituted Ca_(2.91)Si_(2)O_(7):0.09Eu^(3+) can serve as red-emitting phosphors for applications in w-LEDs.

关键词： Ca_(3)Si_(2)O_(7) Red-emitting phosphor Structure substitution Luminescence enhancement Crystal-field effect White light-emitting diode

Novel high-voltage cathode for aqueous zinc ion batteries:Porous K_(0.5)VOPO_(4)·1.5H_(2)O with reversible solid-solution intercalation and conversion storage mechanism

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第6期93卷 71-78,I0003页

作者： Liyu Wang Mingliang zhao Xiaoyu Zhang Menghua Wu yu Zong yu Chen Xinliang Huang Mingjie Xing Xin Ning wen wen Daming Zhu Xiaochuan Ren Industrial Research Institute of Nonwovens&Technical Textiles College of Textiles&ClothingShandong Engineering Research Center for Specialty Nonwoven MaterialsQingdao UniversityQingdao 266071ShandongChina Shanghai Synchrotron Radiation Facility Shanghai Advanced Research InstituteChinese Academy of SciencesShanghai 201204China

Cathode materials that possess high output voltage,as well as those that can be mass-produced using facile techniques,are crucial for the advancement of aqueous zinc-ion battery(ZIBs)applications,Herein,we present for the first time a new porous K_(0.5)VOPO_(4)·1.5H_(2)O polyanionic cathode(P-KIVP)with high output voltage(above 1.2 V)that can be manufactured at room temperature using straightforward coprecipitation and etching techniques.The P-KVP cathode experiences anisotropic crystal plane expansion via a sequential solid-solution intercalation and phase co nversion pathway throughout the Zn^(2+)storage process,as confirmed by in-situ synchrotron X-ray diffraction and ex-situ X-ray photoelectron spectroscopy.Similar to other layered vanadium-based polyanionic materials,the P-KVP cathode experiences a progressive decline in voltage during the cycle,which is demonstrated to be caused by the irreversible conversion into amorphous VO_(x).By introducing a new electrolyte containing Zn(OTF)_(2) to a mixed triethyl phosphate and water solution,it is possible to impede this irreversible conversion and obtain a high output voltage and longer cycle life by forming a P-rich cathode electrolyte interface layer.As a proof-of-concept,the flexible fiber-shaped ZIBs based on modified electrolyte woven into a fabric watch band can power an electronic watch,highlighting the application potential of P-KVP cathode.

关键词： Aqueous zinc ion battery Cathode Porous material High voltage platform In-situ synchrotron X-ray diffraction

In Situ Atomic Reconstruction Engineering Modulating Graphene-Like MXene-Based Multifunctional Electromagnetic Devices Covering Multi-Spectrum

在线全文

学校读者我要写书评

暂无评论

Nano-Micro Letters 2024年第9期16卷 247-261页

作者： Ting‑Ting Liu Qi Zheng wen‑Qiang Cao yu‑Ze Wang Min Zhang Quan‑Liang zhao Mao‑Sheng Cao School of Materials Science and Engineering Beijing Institute of TechnologyBeijing 100081People’s Republic of China Department of Physics Beijing Technology and Business UniversityBeijing 100048People’s Republic of China School of Mechanical and Materials Engineering North China University of TechnologyBeijing 100144People’s Republic of China

With the diversified development of big data,detection and precision guidance technologies,electromagnetic(EM)functional materials and devices serving multiple spectrums have become a hot topic.Exploring the multispectral response of materials is a challenging and meaningful scientific question.In this study,MXene/TiO_(2)hybrids with tunable conduction loss and polarization relaxation are fabricated by in situ atomic reconstruction engineering.More importantly,MXene/TiO_(2)hybrids exhibit adjustable spectral responses in the GHz,infrared and visible spectrums,and several EM devices are constructed based on this.An antenna array provides excellent EM energy harvesting in multiple microwave bands,with|S11|up to−63.2 dB,and can be tuned by the degree of bending.An ultra-wideband bandpass filter realizes a passband of about 5.4 GHz and effectively suppresses the transmission of EM signals in the stopband.An infrared stealth device has an emissivity of less than 0.2 in the infrared spectrum at wavelengths of 6-14μm.This work can provide new inspiration for the design and development of multifunctional,multi-spectrum EM devices.

关键词： Graphene-like MXene hybrids Multi-spectral response Multi-function antenna Ultra-wideband bandpass filter Electromagnetic device