检索结果-南通市图书馆

Illumination system with compound parabolic retro-reflector for single LCOS panel projection display

在线全文

学校读者我要写书评

暂无评论

Journal of Zhejiang University-Science A(Applied Physics & Engineering) 2007年第12期8卷 2021-2026页

作者： ZHEN Yan-kun YE Zi ZHANG Wen-zi zhao ting-yu yu Fei-hong State Key Lab. of Modern Optical Instrumentation Zhejiang University Hangzhou 310027 China

In this paper, a new illumination system with ultra high performance (UHP) lamp is proposed for projection display. Parabolic reflector (PR) and compound parabolic retro-reflector (CPR) were jointly used to collect and collimate the light generated from UHP lamp. A polarization converter system (PCS) was used to increase the light efficiency of the projection display system. A beam transformer between PCS and 2f imaging systems was directly used to make the illumination meet the requirement of projection display system. With the consideration of the loss of reflection, the light efficiency in this projection display system was estimated to be 15.6%.

关键词： Compound parabolic retro-reflector (CPR) Uniformity Light efficiency Etendue

Water source identification in mines combining LIF technology and ResNet

在线全文

学校读者我要写书评

暂无评论

Journal of Mountain Science 2023年第11期20卷 3392-3401页

作者： YAN Peng-cheng zhao yu-ting LI Guo-dong WANG Jing-bao WANG Wen-chang State Key Laboratory of Deep Coal Mine Exploitation Response and Disaster Prevention Anhui University of Science andTechnologyHuainan 232001China School of Electrical and Information Engineering Anhui University of Science and TechnologyHuainan 232001China Collaborative Innovation Center of Mine Intelligent Equipment and Technology Anhui University of Science&TechnologyHuainan 232001China

The problem of mine water source has always been an important hidden danger in mine safety *** water source under the mine working face may lead to geological disasters,such as mine collapse and water *** research background of mine water source identification involves many fields such as mining production,environmental protection,resource utilization and technological *** is a comprehensive and interdisciplinary subject,which helps to improve the safety and sustainability of mine ***,timely and accurate identification and control of mine water source is very important to ensure mine production ***-Induced Fluorescence(LIF)technology,characterized by high sensitivity,specificity,and spatial resolution,overcomes the time-consuming nature of traditional chemical *** this experiment,sandstone water and old air water were collected from the Huainan mining area as original *** types of mixed water samples were prepared by varying their proportions,in addition to the two original water samples,resulting in a total of seven different water samples for *** preprocessing methods,namely,MinMaxScaler,StandardScaler,Standard Normal Variate(SNV)transformation,and Centering Transformation(CT),were applied to preprocess the original spectral data to reduce noise and *** was determined as the optimal preprocessing method based on class discrimination,data distribution,and data *** maintain the original data features while reducing the data dimension,including the original spectral data,five sets of data were subjected to Principal Component Analysis(PCA)and Linear Discriminant Analysis(LDA)dimensionality *** comparing the clustering effect and Fisher's ratio of the first three dimensions,PCA was identified as the optimal dimensionality reduction ***,two neural network models,CT+PCA+CNN and CT+PCA+ResNet,were constructed by combining Convolutional Neural Networks(

关键词： Water source identification Mine safety LIF technology CT PCA ResNet

在线全文

学校读者我要写书评

暂无评论

基于假设温度减推力起飞的理论依据

西南交通大学学报 2005年第5期40卷 677-679页

作者：赵廷渝中国民航飞行学院教务处四川广汉618307

为正确使用和推广减推力起飞技术,分析了高涵道比涡轮风扇发动机温度特性和大型民航机起飞性能.假设温度是由飞机实际起飞质量确定的相当的大气温度.实施假设温度减推力起飞的必要条件是飞机实际起飞质量小于最大起飞质量,并且假设温度... 详细信息

为正确使用和推广减推力起飞技术,分析了高涵道比涡轮风扇发动机温度特性和大型民航机起飞性能.假设温度是由飞机实际起飞质量确定的相当的大气温度.实施假设温度减推力起飞的必要条件是飞机实际起飞质量小于最大起飞质量,并且假设温度高于发动机推力平台温度.假设温度减推力起飞的风扇转速由发动机相似条件计算.

关键词：减推力起飞假设温度理论依据涡扇发动机

在线全文

学校读者我要写书评

暂无评论

航空发动机数学模型

电子科技大学学报 2005年第4期34卷 545-547页

作者：赵廷渝中国民航飞行学院教务处四川广汉618307

提高模型精度以及保证方程求解收敛是目前发动机建模亟待解决的问题。该文以双转子加力涡喷发动机的数学模型为例,介绍了线性状态空间模型的建立,提出了一种根据发动机进口参数进行飞行包线区域划分的方法,在应用该方法得到的飞行区域内... 详细信息

提高模型精度以及保证方程求解收敛是目前发动机建模亟待解决的问题。该文以双转子加力涡喷发动机的数学模型为例,介绍了线性状态空间模型的建立,提出了一种根据发动机进口参数进行飞行包线区域划分的方法,在应用该方法得到的飞行区域内,发动机模型的结构参数摄动最小。

关键词：航空发动机数学模型线性状态空间飞行包线

基于纳米压痕实验的超声表面滚压镁合金本构参数反演分析

在线全文

学校读者我要写书评

暂无评论

中国有色金属学报 2023年第5期33卷 1469-1479页

作者：赵玉婷周霞大连理工大学运载工程与力学学部工程力学系工业装备结构分析国家重点实验室大连116024

本研究对AZ31B镁合金进行超声表面滚压处理,获得在厚度方向具有细晶层的镁合金板并表征其截面的微观结构;通过纳米压痕实验获得了镁合金截面不同位置的力学性能。将ABAQUS有限元软件与Isight软件相结合,反演得出镁合金测量层简化J-C本... 详细信息

本研究对AZ31B镁合金进行超声表面滚压处理,获得在厚度方向具有细晶层的镁合金板并表征其截面的微观结构;通过纳米压痕实验获得了镁合金截面不同位置的力学性能。将ABAQUS有限元软件与Isight软件相结合,反演得出镁合金测量层简化J-C本构方程参数;对细晶层的力-位移曲线进行有限元计算,探讨了残余应力对镁合金力学性能的影响。结果表明:通过超声表面滚压处理后,试样截面方向形成厚度约为80.68μm的细晶层;截面方向上距镁合金表面越近,镁合金的弹性模量、硬度、残余压应力越大,滚压头的平均位移越小;有限元计算得出镁合金细晶层的残余应力对镁合金塑性性能的提高起到重要作用。通过分析超声表面滚压后AZ31B镁合金的力学性能,对其应用提供了一定的参考和依据。

关键词：超声表面滚压纳米压痕实验有限元计算反演参数

同方期刊数据库

MXene Hybridized Polymer with Enhanced Electromagnetic Energy Harvest for Sensitized Microwave Actuation and Self-Powered Motion Sensing

在线全文

学校读者我要写书评

暂无评论

NANO-MICRO LETTERS 2025年第1期17卷 1-15页

作者： Wang, yu-Ze Wang, yu-Chang Liu, ting-ting zhao, Quan-Liang Li, Chen-Sha Cao, Mao-Sheng Beijing Inst Technol Sch Mat Sci & Engn Beijing 100081 Peoples R China Peking Univ Sch Mat Sci & Engn Beijing 100871 Peoples R China North China Univ Technol Sch Mech & Mat Engn Beijing 100144 Peoples R China Heilongjiang Univ Minist Educ Peoples Republ China Key Lab Funct Inorgan Mat Chem Harbin 150080 Peoples R China

Polymeric microwave actuators combining tissue-like softness with programmable microwave-responsive deformation hold great promise for mobile intelligent devices and bionic soft robots. However, their application is challenged by restricted electromagnetic sensitivity and intricate sensing coupling. In this study, a sensitized polymeric microwave actuator is fabricated by hybridizing a liquid crystal polymer with Ti3C2Tx (MXene). Compared to the initial counterpart, the hybrid polymer exhibits unique space-charge polarization and interfacial polarization, resulting in significant improvements of 230% in the dielectric loss factor and 830% in the apparent efficiency of electromagnetic energy harvest. The sensitized microwave actuation demonstrates as the shortened response time of nearly 10 s, which is merely 13% of that for the initial shape memory polymer. Moreover, the ultra-low content of MXene (up to 0.15 wt%) benefits for maintaining the actuation potential of the hybrid polymer. An innovative self-powered sensing prototype that combines driving and piezoelectric polymers is developed, which generates real-time electric potential feedback (open-circuit potential of similar to 3 mV) during actuation. The polarization-dominant energy conversion mechanism observed in the MXene-polymer hybrid structure furnishes a new approach for developing efficient electromagnetic dissipative structures and shows potential for advancing polymeric electromagnetic intelligent devices.

关键词： Microwave absorption Electromagnetic response Energy harvest Self-sensing Soft actuator

Optical transfer function analysis of circular-pupil wavefront coding systems with separable phase masks

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Physics B 2012年第6期21卷 200-206页

作者：赵廷玉刘钦晓余飞鸿 Department of Physics Zhejiang Sci-Tech University Optical Engineering Department Zhejiang University

This paper proposes a simple method to achieve the optical transfer function of a circular pupil wavefront coding system with a separable phase mask in Cartesian coordinates. Based on the stationary phase method, the optical transfer function of the circular pupil system can be easily obtained from the optical transfer function of the rectangular pupil system by modifying the cut-off frequency and the on-axial modulation transfer function. Finally, a system with a cubic phase mask is used as an example to illustrate the way to achieve the optical transfer function of the circular pupil system from the rectangular pupil system.

关键词： wavefront coding circular pupil separable phase mask stationary phase method

在线全文

学校读者我要写书评

暂无评论

小型核反应堆自主控制及其深空探测应用设想

宇航学报 2019年第1期40卷 1-8页

作者：邱建文徐瑞赵宇庭中广核研究院北京分院北京100086 北京理工大学宇航学院北京100081 深空自主导航与控制工信部重点实验室北京100081

针对空间小型模块化核反应堆的自主控制问题,提出自主控制体系结构,降低反应堆控制对人的依赖程度,满足了深空探测任务对空间堆自主控制的需求。首先介绍了核反应堆自主控制技术和空间探测自主技术的发展现状,分析了空间小型堆的自主控... 详细信息

针对空间小型模块化核反应堆的自主控制问题,提出自主控制体系结构,降低反应堆控制对人的依赖程度,满足了深空探测任务对空间堆自主控制的需求。首先介绍了核反应堆自主控制技术和空间探测自主技术的发展现状,分析了空间小型堆的自主控制需求,然后阐释了自主控制及核反应堆近自主控制的内涵。最后基于空间堆的运行特点,给出小型堆近自主控制分层体系结构的组成元素,并进一步建立了融合决策层和功能层的小型堆多智能体自主控制体系结构。

关键词：小型模块化反应堆自主控制深空探测多智能体

倾斜入射的波前编码系统的点扩散函数扩大效应分析

在线全文

学校读者我要写书评

暂无评论

物理学报 2008年第1期57卷 200-205页

作者：赵廷玉叶子张文字余飞鸿浙江大学光电系现代光学仪器国家重点实验室杭州310027

通过对坐标系统进行旋转,计算得到了三次型波前编码系统的倾斜入射的光瞳函数,并给出了近似表达式.分析表明倾斜入射会产生三次相位扩大效应和离焦扩大效应,它们和入射角的正负无关,且随着入射角绝对值的增大而增大.这表现在点扩散函数(... 详细信息

通过对坐标系统进行旋转,计算得到了三次型波前编码系统的倾斜入射的光瞳函数,并给出了近似表达式.分析表明倾斜入射会产生三次相位扩大效应和离焦扩大效应,它们和入射角的正负无关,且随着入射角绝对值的增大而增大.这表现在点扩散函数(point spread function,PSF)上会扩展PSF包络的两条直角边,表现在调制传递函数(modulation transfer function,MTF)上会降低MTF值.子午面倾斜入射时,子午方向的三次相位扩大效应和离焦放大效应大于弧矢方向,从而导致子午方向的PSF包络扩展更大、MTF降低更多;弧矢面倾斜入射时,弧矢方向的三次相位扩大效应和离焦放大效应大于子午方向,从而导致弧矢方向的PSF包络扩展更大、MTF降低更多.

关键词：倾斜入射波前编码三次相位扩大效应离焦扩大效应