检索结果-南通市图书馆

Progress in Natural Science:Materials International 2024年第3期34卷 470-481页

作者： Xiang Liu Chaojie zhang Shaowei Hu liqiang zhang Haichuan Wang School of Metallurgical Engineering Anhui University of Technology

Macrosegregation and shrinkage porosity in large steel ingots are key factors restricting the homogenization of large cast and forged parts. Due to the complex mechanisms of their formation, they have always been challenging issues in the research on solidification control of large steel ingots. The purpose of this review is to systematically revisit the research progress on the mechanisms of macrosegregation and shrinkage porosity formation in large steel ingots, focusing on the mechanisms of formation of 'A' type segregation, positive segregation at the top, and negative segregation at the bottom, and their impact on the quality of steel ingots. At the same time, the conditions and influencing factors for the formation of shrinkage porosity are analyzed in detail, and the interaction between macrosegregation and shrinkage porosity during the solidification process of steel ingots is *** on existing research results and challenges, prospects for future research directions are proposed,emphasizing the development of high-precision numerical simulation techniques and experimental research methods to deeply understand the internal mechanisms of segregation and porosity formation, providing a scientific basis for formulating effective control strategies.

关键词： Large steel ingot Macrosegregation Mathematical model Shrinkage porosity Solidification process

Intelligent proportioning model of converter scrap based on optimization algorithm

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Progress in Natural Science:Materials International 2024年第1期34卷 37-44页

作者： Chaojie zhang Jinjun Cheng liqiang zhang Yingxue Wang Wei zhang Jianwei Yuan Haichuan Wang School of Metallurgical Engineering Anhui University of Technology National Engineering Research Center for Public Safety Risk Perception and Control by Big Data(RPP) China Academic of Electronics and Information Technology Wuhu Xinxing Pipes Co. Ltd.

Scrap is one of the main raw materials in converter steelmaking. Due to the wide variety of scrap and the significant differences in its prices, the proportioning of scrap presents a challenge in converter steelmaking. This paper explores the optimal proportioning method of scrap for converters using an optimization mathematical model. Initially, the melting characteristics of scrap after being added to the converter's molten iron were investigated using finite element numerical simulations. The study found that when the weight of the scrap is fixed, both the shape and type of the scrap significantly influence the melting time. Subsequently, employing mathematical optimization methods and considering comprehensive process parameters of the 210t converter smelting, including the composition and unit price of the scrap, as well as the requirements of the converter steelmaking process for scrap, an optimization model for the proportioning of scrap in converters was *** model was solved using computer programming languages. Through this optimization model, it is possible to obtain the lowest cost per ton of molten steel in the converter smelting process by determining the optimal proportions of various types of scrap.

关键词： scrap proportioning Optimization model Converter steelmaking mathematical model numerical simulation

Impact crater recognition methods:A review

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Science China Earth Sciences 2024年第6期67卷 1719-1742页

作者： Dong CHEN Fan HU liqiang zhang Yunzhao WU Jianli DU Jiju PEETHAMBARAN College of Civil Engineering Nanjing Forestry UniversityNanjing 210037China Department of Geography State Key Laboratory of Remote Sensing ScienceFaculty of Geographical ScienceBeijing Normal UniversityBeijing 100875China Purple Mountain Observatory Chinese Academy of SciencesNanjing 210023China Key Laboratory of Space Object and Debris Observation Chinese Academy of SciencesNanjing 210023China Department of Mathematics and Computing Science Saint Mary’s UniversityHalifaxNS B3H 3C3Canada

Impact craters are formed due to the high-speed collisions between small to medium-sized celestial *** is the most significant driving force in the evolution of celestial bodies,and the impact craters provide crucial insights into the formation,evolution,and impact history of celestial *** this paper,we present a detailed review of the characteristics of impact craters,impact crater remote sensing data,recognition algorithms,and applications related to impact *** first provide a detailed description of the geometric texture,illumination,and morphology characteristics observed in remote sensing data of *** we summarize the remote sensing data and cataloging databases for the four terrestrial planets(i.e.,the Moon,Mars,Mercury,and Venus),as well as the impact craters on ***,we study the advancement achieved in the traditional methods,machine learning methods,and deep learning methods applied to the classification,segmentation,and recognition of impact ***,based on the analysis results,we discuss the existing challenges in impact crater recognition and suggest some ***,we explore the implementation of impact crater detection algorithms and provide a forward-looking perspective.

关键词： Terrestrial planets Deep space exploration Impact crater Impact crater recognition Deep learning

同方期刊数据库

Application of electromagnetic metallurgy in continuous casting: A review

在线全文

学校读者我要写书评

暂无评论

Progress in Natural Science:Materials International 2024年第1期34卷 1-11页

作者： Jiale Li Yi Nian Xiang Liu Youcheng Zong Xinyu Tang Chaojie zhang liqiang zhang The Intelligent Metallurgy Research Institute School of Metallurgical Engineering Anhui University of Technology

The standards within the global steel industry are constantly advancing, necessitating increasingly rigorous quality control protocols during the continuous casting process. Central to the challenges faced in this domain are persistent defects such as central segregation, V-shaped segregation, and center porosity, which significantly impede the production of high-caliber steel products. The discipline of electromagnetic metallurgy has emerged as a critical solution in reducing these defects, thereby enhancing the efficiency and stability of continuous casting operations. Its demonstrated effectiveness has led to its widespread implementation across global and domestic steel production industries. This paper aims to deliver a comprehensive examination of electromagnetic metallurgy's impact on the final stages of solidification in continuous casting, along with its contributions to the heating and purification processes within the tundish. Additionally, it will explore the potential advancements and applications of this technology in the evolving sphere of continuous casting.

关键词： continuous casting Quality control Final electromagnetic stirring Induction heating Electromagnetic purification

Petrogenesis, oxidation state and volatile content of Dongga tonalite in the Gangdese belt, Xizang: Implication for porphyry Cu mineralization

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Acta Geochimica 2024年第2期43卷 280-295页

作者： liqiang zhang Xilian Chen Shaohao Zou Deru Xu Xuena Wang Hua Wang State Key Laboratory of Nuclear Resources and Environment East China University of TechnologyNanchang 330013China School of Earth Sciences East China University of TechnologyNanchang 330013China

The Gangdese belt in Xizang has experienced both Jurassic subduction and Cenozoic continental collision processes, making it a globally renowned region for magmatic rocks and porphyry copper deposits. Numerous Jurassic intrusions have been identified in the belt. Apart from the quartz diorite porphyry in the large Xietongmen deposit, the Cu mineralization potential of other Jurassic intrusions in this belt remains unclear. This study presents zircon U–Pb dating and trace elements, apatite major and trace elements as well as published whole-rock geochemical and isotopic data of the Dongga tonalite in the central part of the Gangdese belt, aiming to reveal the petrogenesis, oxidation state, volatile content, and Cu mineralization potential of this intrusion. The Dongga tonalite has a zircon U–Pb age of 179.4 ± 0.9 Ma. It exhibits high whole-rock V/Sc values(8.76–14.6), relatively low apatite CeN/CeN*ratios(1.04–1.28), elevated zircon(Eu/Eu*)Nvalues(an average of 0.44), high Ce4+/Ce3+values(205–1896), and high ?FMQ values(1.3–3.7), collectively suggesting a high magmatic oxygen fugacity. The Dongga tonalite features amphibole phenocrysts, relatively high whole-rock Sr/Y ratios(20.3–58.9), and lower zircon Ti temperatures (502–740 ℃), reflecting a high magmatic water content. Estimation of magmatic sulfur content(0.002–0.024 wt%) based on apatite SO3contents indicates an enriched magma sulfur content. Combined with previous studies and the collected Sr–Nd–Hf isotopes, the Dongga tonalite is derived from juvenile lower crust related with subduction of the Neo-Tethys oceanic slab. When compared with Xietongmen orebearing porphyries, the Dongga tonalite exhibits remarkable similarities with the Xietongmen ore-bearing porphyries in terms of magma source, tectonic background, magmatic redox state, and volatile components, which indicates that the Dongga tonalite has a high porphyry Cu mineralization potential, and therefore, provides important guidance for the future mineral

关键词： Tonalite Zircon Apatite Mineralization potential Dongga area Gangdese belt

In-situ imaging electrocatalysis in a solid-state Li-O_(2) battery with CuSe nanosheets as air cathode

在线全文

学校读者我要写书评

暂无评论

Chinese Chemical Letters 2024年第5期35卷 466-470页

作者： Peng Jia Yunna Guo Dongliang Chen Xuedong zhang Jingming Yao Jianguo Lu liqiang zhang Hebei Key Laboratory of Applied Chemistry College of Environmental and Chemical EngineeringYanshan UniversityQinhuangdao 066004China Clean Nano Energy Center State Key Laboratory of Metastable Materials Science and TechnologyYanshan UniversityQinhuangdao 066004China State Key Laboratory of Silicon and Advanced Semiconductor Materials School of Materials Science and EngineeringZhejiang UniversityHangzhou 310058China Key Laboratory of Low Dimensional Materials and Application Technology of Ministry of Education School of Materials Science and EngineeringXiangtan UniversityXiangtan 411105China

The development of highly efficient catalysts in the cathodes of rechargeable Li-O_(2) batteries is a considerable *** enhance the electrochemical performance of the Li-O_(2) battery,it is essential to choose a suitable catalyst *** selenide(CuSe)is considered as a more promising cathode catalyst material for Li-O_(2) battery due to its better conductivity and rich electrochemical active ***,its electrochemical reaction and fundamental catalytic mechanism remain unclear till ***,in-situ environmental transmission electron microscopy technique was used to study the catalysis mechanism of the CuSe nanosheets in Li-O_(2) batteries during discharge and charge *** is found that Li_(2)O was formed and decomposed around the ultrafine-grained Cu during the discharge and charge processes,respectively,demonstrating excellent *** indicate that the freshly formed ultrafine-grained Cu in the conversion reaction catalyzed the latter four-electron-transfer oxygen reduction reaction,leading to the formation of Li_(2)*** study provides important understanding of the electrochemistry of the LiO_(2) nanobatteries,which will aid the development of high-performance Li-O_(2) batteries for energy storage applications.

关键词： In-situ environmental transmission electron microscopy Lithium oxygen batteries CuSe nanosheets Oxygen reduction reaction Oxygen evolution reaction

In situ observation of the electrochemical behavior of Li–CO_(2)/O_(2)batteries in an environmental transmission electron microscope

在线全文

学校读者我要写书评

暂无评论

Carbon Energy 2024年第4期6卷 244-255页

作者： Peng Jia Yunna Guo Dongliang Chen Jingming Yao Xuedong zhang Jianguo Lu Yuqing Qiao liqiang zhang Hebei Key Laboratory of Applied Chemistry College of Environmental and Chemical EngineeringYanshan UniversityQinhuangdaoChina State Key Laboratory of Metastable Materials Science and Technology Clean Nano Energy CenterYanshan UniversityQinhuangdaoChina State Key Laboratory of Silicon and Advanced Semiconductor Materials School of Materials Science and EngineeringZhejiang UniversityHangzhouChina Key Laboratory of Low Dimensional Materials and Application Technology of Ministry of Education School of Materials Science and EngineeringXiangtan UniversityXiangtanChina

Li–CO_(2)/O_(2)batteries,a promising energy storage technology,not only provide ultrahigh discharge capacity but also capture CO_(2)and turn it into renewable *** electrochemical reaction pathways'ambiguity,however,creates a hurdle for their practical *** study used copper selenide(CuSe)nanosheets as the air cathode medium in an environmental transmission electron microscope to in situ study Li–CO_(2)/O_(2)(mix CO_(2)as well as O_(2)at a volume ratio of 1:1)and Li–O_(2)batteries as well as Li–CO_(2)*** discharge reactions take place successively in the Li–CO_(2)/O_(2)–CuSe nanobattery:(I)4Li^(+)+O_(2)+4e^(−)→2Li_(2)O;(II)Li_(2)O+CO_(2)→Li_(2)CO_(3).The charge reaction proceeded via(III)2Li_(2)CO_(3)→4Li^(+)+2CO_(2)+O_(2)+4e^(−).However,Li–O_(2)and Li–CO_(2)nanobatteries showed poor cycling stability,suggesting the difficulty in the direct decomposition of the discharge *** fluctuations of the Li–CO_(2)/O_(2)battery's electrochemistry were also shown to depend heavily on O_(2).The CuSe‐based Li–CO_(2)/O_(2)battery showed exceptional electrochemical *** Li^–CO_(2)/O_(2)battery offered a discharge capacity apex of 15,492 mAh g^(−1) and stable cycling 60 times at 100 mA g^(−1).Our research offers crucial insight into the electrochemical behavior of Li–CO_(2)/O_(2),Li–O_(2),and Li–CO_(2)nanobatteries,which may help the creation of high‐performance Li–CO_(2)/O_(2)batteries for energy storage applications.

关键词： CuSe nanosheets electrochemical reaction in situ environmental transmission electron microscopy Li-CO_(2)battery Li-CO_(2)/O_(2)battery Li-O_(2)battery

Study of the reaction mechanism for preparing powdered activated coke with SO_(2)adsorption capability via one-step rapid activation method under flue gas atmosphere

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of Chemical Engineering 2024年第1期65卷 158-168页

作者： Binxuan Zhou Jingcai Chang Jun Li Jinglan Hong Tao Wang liqiang zhang Ping Zhou Chunyuan Ma School of Environmental Science and Engineering Shandong UniversityQingdao 266237China School of Energy and Power Engineering Shandong UniversityJinan 250061China Weihai Research Institute of Industrial Technology of Shandong University Weihai 264209China

In this study,the impact of different reaction times on the preparation of powdered activated carbon(PAC)using a one-step rapid activation method under flue gas atmosphere is investigated,and the underlying reaction mechanism is *** indicate that the reaction process of this method can be divided into three stages:stage I is the rapid release of volatiles and the rapid consumption of O_(2),primarily occurring within a reaction time range of 0-0.5 s;stage II is mainly the continuous release and diffusion of volatiles,which is the carbonization and activation coupling reaction stage,and the carbonization process is the main in this *** stage mainly occurs at the reaction time range of 0.5 -2.0 s when SL-coal is used as material,and that is 0.5-3.0 s when JJ-coal is used as material;stage III is mainly the activation stage,during which activated components diffuse to both the surface and interior of *** stage mainly involves the reaction stage of CO_(2)and H2O(g)activation,and it mainly occurs at the reaction time range of 2.0-4.0 s when SL-coal is used as material,and that is 3.0-4.0 s when JJ-coal is used as ***,the main function of the first two stages is to provide more diffusion channels and contact surfaces/activation sites for the diffusion and activation of the activated components in the third *** the reaction mechanism would serve as a crucial reference and foundation for designing the structure,size of the reactor,and optimal positioning of the activator nozzle in PAC preparation.

关键词： Reaction mechanism Powdered activated coke preparation SO_(2)adsorption One-step rapid activation Flue gas atmosphere

Enhanced electrochemical performance of nanoscale single crystal NMC811 modification by coating LiNbO_(3)

在线全文

学校读者我要写书评

暂无评论

Chinese Chemical Letters 2024年第5期35卷 514-518页

作者： Fengyu zhang Yali Liang zhangran Ye Lei Deng Yunna Guo Ping Qiu Peng Jia Qiaobao zhang liqiang zhang Clean Nano Energy Center State Key Laboratory of Metastable Materials Science and Technology Yanshan UniversityQinhuangdao 066004China School of New Energy and Materials China University of Petroleum BeijingBeijing 102249China Hebei Key Laboratory of Applied Chemistry College of Environmental and Chemical EngineeringYanshan UniversityQinhuangdao 066004China State Key Laboratory of Physical Chemistry of Solid Surfaces College of MaterialsXiamen UniversityXiamen 361005China

Single crystallization is an important strategy to resolve intergranular cracks and unnecessary side reactions with electrolytes in layered transition metal oxide cathodes LiNi_(0.8)Mn_(0.1)Co_(0.1)O_(2)(NMC811).Due to the limitations of high-temperature sintering and multi-step calcination,single crystal NMC811 generally shows irregular particles with a size of 2-3μ***,the prolonged Li-ion diffusion pathway and the stress generated by the uneven de-/intercalation sluggish Li-ion diffusion kinetics,what is more,cause structural damage such as intragranular cracks.A slow Li extraction rate or particle size reduction will ameliorate the structural damage and improve the cycling *** the most promising cathodes for next-generation power batteries,NMC811 required fast charge performance and cycle *** size reduction appears to be the displacement *** is an effective strategy to mitigate intragranular cracks of single crystal ***,the serious aggregation and increased specific surface area become new *** this article,we synthesized monodisperse nanoscale single crystal NMC811 by molten salt method and modified the surface by LiNbO3 *** electrochemical performance shows that nanoscale single crystal NMC811 has faster kinetic and higher capacity retention,so the strategy of combining nanonization and surface coating is an alternative way to prepare high specific capacity and cycle stable single crystal NMC811.

关键词： Ni-rich NMC811 Molten salt method Nanonization Surface coating Micron cracks

Preparation and Photostriction Properties of BiFeO_(3)-BaTiO_(3)Ceramics

在线全文

学校读者我要写书评

暂无评论

Journal of Wuhan University of Technology(Materials Science) 2024年第5期39卷 1079-1086页

作者： ZHENG Zewei zhang liqiang CHEN Chen CAO Minghe YI Zhiguo LIU Hanxing School of Materials Science and Engineering Wuhan University of TechnologyWuhan 430070China State Key Laboratory of High Performance Ceramics and Superfine Microstructure Shanghai Institute of CeramicsChinese Academy of SciencesShanghai 200050China School of Microelectronics Shanghai UniversityShanghai 200444China International School of Materials Science and Engineering Wuhan University of TechnologyWuhan 430070China

Under illumination by 405,520 and 655 nm monochromatic visible light(light intensity of 30 kW/m^(2)),large photostriction(ΔL/L)of 0.19%,0.13%and 0.26%for 67BiFeO_(3)-33BaTiO_(3)(67BF-33BT)lead-free ferroelectric ceramics are obtained,*** studying the ferroelectric and photoelectric properties in conjunction with in situ Raman spectroscopy,it is found that the photostrictive effect of 67BF-33BT is not caused by the electrical strain induced by abnormal photovoltaic voltage,but related to the optical induced oxygen octahedral *** 67BF-33BT lead-free ferroelectric material with excellent photostrictive response in the visible light region is expected to play an important role in the field of optical drive electromechanical devices.

关键词： ferroelectric ceramics photostrictive effect visible light response