检索结果-南通市图书馆

Optimization Mechanism of Mechanical Properties of Basalt Fiber-Epoxy Resin Composites by Interfacially Enriched Distribution of Nano-Starch Crystals

引用

Chinese Journal of Mechanical Engineering 2024年第3期37卷 289-296页

作者： Yanpeng Wei Jiale Zhao jian Zhuang Peng zhang Zhiwu Han College of Biological and Agricultural Engineering Jilin UniversityChangchun 130025China Key Laboratory of Bionics Engineering Ministry of EducationJilin UniversityChangchun 130025China Weichai Lovol Heavy Industry Co. LTDWeifang 261031China

Fibre reinforced polymer composites have become a new generation of structural materials due to their unique advantages such as high specific strength,designability,good dimensional stability and ease of large-area monolithic ***,the problem of interfacial bonding between the resin matrix and the fibres limits the direct use of reinforcing fibres and has become a central difficulty in the development of basalt fibre-epoxy *** paper proposes a solution for enhancing the strength of the fibre-resin interface using maize starch nanocrystals,which are highly yield and ***,in this paper,corn starch nanocrystals(SNC)were prepared by hydrolysis,and were deposited on the surface of basalt fibers by electrostatic *** that,in order to maximize the modification effect of nano-starch crystals on the interface,the basalt fiber-epoxy resin composite samples were prepared by mixing in a pressureless molding *** test results shown that the addition of basalt fibers alone led to a reduction in the strength of the *** of 0.1 wt%SNC on the surface of basalt fibers can make the strength consistent with pure epoxy *** the adsorption amount of SNC reached 0.5 wt%,the tensile strength of the samples was 23.7%higher than that of pure epoxy *** is due to the formation of ether bond homopolymers between the SNC at the fibre-epoxy interface and the epoxy resin,which distorts the originally smooth interface,leading to increased stress concentration and the development of *** enhances the binding of basalt *** conclusions of this paper can provide an effective,simple,low-cost and non-polluting method of interfacial enhancement modification.

关键词： Basalt fibres Epoxy resin Fibre reinforced composites Starch nanocrystals Eco-friendly

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Exploring changes of precipitation extremes under climate change through global variable-resolution modeling

引用

Science Bulletin 2024年第2期69卷 237-247页

作者： Wei Sun jian Li Rucong Yu Nina Li Yi zhang State Key Laboratory of Severe Weather Chinese Academy of Meteorological SciencesBeijing 100081China Institute of Tibetan Plateau Meteorology China Meteorological AdministrationChengdu 610072China Department of Atmospheric Science Yunnan UniversityKunming 650091China National Meteorological Center China Meteorological AdministrationBeijing 100081China 2035 Future Laboratory PIESAT Information Technology Co.Ltd.Beijing 100105China

Understanding the responses of precipitation extremes to global climate change remains limited owing to their poor representations in models and complicated interactions with multi-scale *** we take the record-breaking precipitation over China in 2021 as an example,and study its changes under three different climate scenarios through a developed pseudo-global-warming(PGW)experimental framework with 60-3 km variable-resolution global ensemble *** to the present climate,the precipitation extreme under a warmer(cooler)climate increased(decreased)in intensity,coverage,and total amount at a range of 24.3%-37.8%(18.7%-56.1%).With the help of the proposed PGW experimental framework,we further reveal the impacts of the multi-scale system interactions in climate change on the precipitation *** the warmer climate,large-scale water vapor transport converged from double typhoons and the subtropical high marched into central China,enhancing the convective energy and instability on the leading edge of the transport *** a result,the mesoscale convective system(Mcs)that directly contributed to the precipitation extreme became stronger than that in the present *** the contrary,the cooler climate displayed opposite changing characteristics relative to the warmer climate,ranging from the large-scale systems to local environments and to the *** summary,our study provides a promising approach to scientifically assess the response of precipitation extremes to climate change,making it feasible to perform ensemble simulations while investigating the multi-scale system interactions over the globe.

关键词： Precipitation extreme Climate change Pseudo-global-warming experiment Variable-resolution modeling Multi-scale system interaction

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

饱和砂土液化后大变形机制的离散元细观分析

引用

岩土力学 2019年第4期40卷 1596-1602,1625页

作者：魏星张昭王刚张建民西南交通大学土木工程学院四川成都610031 重庆大学土木工程学院重庆400045 清华大学水利水电工程系北京100084

采用颗粒流软件模拟了饱和砂土在不排水条件下的循环剪切试验,研究了不同因素对液化的影响,并进一步分析了饱和砂土液化后宏观变形的基本规律。在此基础上,从孔隙分布角度解释了砂土液化后的大变形的细观物理机制。通过自编程序对颗粒... 详细信息

采用颗粒流软件模拟了饱和砂土在不排水条件下的循环剪切试验,研究了不同因素对液化的影响,并进一步分析了饱和砂土液化后宏观变形的基本规律。在此基础上,从孔隙分布角度解释了砂土液化后的大变形的细观物理机制。通过自编程序对颗粒排列和孔隙分布的演化过程进行定量描述,给出孔隙率标准差作为液化后体积收缩势的度量,并研究了孔隙率标准差与液化后大变形的关系。离散元细观数值模拟再现了室内试验中的宏观现象,证实了室内试验中饱和砂土液化后的有限剪切大变形是客观真实的材料响应。土体体积收缩势的累积所导致的孔隙均匀化以及土颗粒间自由空隙增大正是饱和砂土液化后循环剪应变逐渐增大的细观机制。孔隙率标准差作为孔隙均匀化的量化指标,与循环剪应变各周次幅值有良好的相关性。

关键词：颗粒流方法砂土液化孔隙分布液化后大变形

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

面板堆石坝面板竖缝特性对面板应力变形影响分析

引用

岩土力学 2009年第4期30卷 1089-1094页

作者：胡耘张嘎程嵩张建民清华大学水沙科学与水利水电工程国家重点实验室北京100084

采用三维有限元方法,研究了面板竖缝特性对面板堆石坝中面板应力变形的影响。基于类似子结构法概念,建立了精细模拟面板及其分缝特性的三维有限元分析方法。针对马来西亚巴贡面板堆石坝,计算了多种面板竖缝宽度和填料的方案,得到坝体和... 详细信息

采用三维有限元方法,研究了面板竖缝特性对面板堆石坝中面板应力变形的影响。基于类似子结构法概念,建立了精细模拟面板及其分缝特性的三维有限元分析方法。针对马来西亚巴贡面板堆石坝,计算了多种面板竖缝宽度和填料的方案,得到坝体和面板的应力变形。计算结果表明,面板竖缝几何尺寸和填料特性对面板的挠度、顺坡向应力、水平向压应力和周边缝张合变形影响不大,而对面板的水平向拉应力和竖缝压缩量影响很大;面板竖缝填料变软和宽度增大均会导致面板的水平向压应力减小,而竖缝压缩量明显增大;采用软木作为填充材料较之填充硬木,可以大约降低一半的压应力;面板竖缝宽度及其填料特性对同期填筑的面板、特别是邻近的面板水平向压应力影响较大。

关键词：面板堆石坝有限元法类似子结构法竖缝接触面

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

前置掺气坎式阶梯溢洪道体型特点及工程应用试验研究

引用

四川大学学报（工程科学版） 2010年第6期42卷 6-11页

作者：陈剑刚张建民许唯临四川大学水力学与山区河流开发保护国家重点实验室四川成都610065

为了避免阶梯溢洪道中前几级阶梯表面发生空蚀破坏,将掺气坎应用到阶梯溢洪道体型设计中,形成前置掺气坎式阶梯溢洪道。这既能充分利用阶梯增加沿程消能的优点,又能扩宽阶梯溢洪道的应用范围。工程模型试验成果表明,通过对掺气坎和阶梯... 详细信息

为了避免阶梯溢洪道中前几级阶梯表面发生空蚀破坏,将掺气坎应用到阶梯溢洪道体型设计中,形成前置掺气坎式阶梯溢洪道。这既能充分利用阶梯增加沿程消能的优点,又能扩宽阶梯溢洪道的应用范围。工程模型试验成果表明,通过对掺气坎和阶梯的体型优化,各级流量的消能率均达到70%左右。1:40物理模型试验上实测溢洪道阶梯竖直面后的掺气浓度沿程分布均大于5%。研究表明这种新型阶梯溢洪道掺气量与掺气浓度易于控制,底部掺气充分,抗空蚀性能优越,消能率高,可以在高水头、大单宽流量溢洪道中推广应用。

关键词：前置掺气坎阶梯溢洪道水力特性掺气减蚀

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Two MADS-box proteins,AGL9 and AGL15,recruit the FIS-PRC2 complex to trigger the phase transition from endosperm proliferation to embryo development in Arabidopsis

引用

Molecular Plant 2024年第7期17卷 1110-1128页

作者： Shen zhang Devasantosh Mohanty Adnan Muzaffar min Ni Department of Plant and Microbial Biology University of Minnesota at Twin CitiesSaint PaulMinnesota MN 55108United States of AmericaUSA

Spatiotemporal regulation of gene expression by polycomb repressive complex 2(PRc2)is critical for animal and plant *** Arabidopsis fertilization independent seed(FIS)-PRC2 complex functions specifically during plant reproduction from gametogenesis to seed *** a double fertilization event,triploid endosperm proliferates early,followed by the growth of a diploid embryo,which replaces the endosperm in Arabidopsis and many *** genes critical for endosperm proliferation such as IKkU2 and minI3 are activated after *** we report that two MADS-box AGAMOUS-LIKE(AGL)proteins associate with the key endosperm proliferation loci and recruit the FIS-PRC2 repressive complex at 4-5 days after pollination(DAP).Interestingly,AGL9 and AGL15 only accumulate toward the end of endosperm proliferation at 4-5 DAP and promote the deposition of H3K27me3 marks at key endosperm proliferation *** of AGL9 and AGL15 or overexpression of AGL9 or AGL15 significantly influence endosperm proliferation and ***-wide analysis with cleavage Under Targets and tagmentation(CUT&Tag)sequencing and RNA sequencing revealed the landscape of endosperm H3K27me3 marks and gene expression profiles in Col-0 and agl9 ***&Tag qPCR also demonstrated the occupancy of the two MADS-box proteins and FIS-PRC2 on a few representative target *** studies suggest that MADS-box proteins could potentially recruit PRc2 to regulate many other developmental processes in plants or even in fungi and animals.

关键词： AGL9 AGL15 embryo endosperm IKU2 MEDEA minI3

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Superhydrophilic nickel hydroxide ultrathin nanosheets enable high-performance asymmetric supercapacitors

引用

Rare Metals 2024年第1期43卷 138-147页

作者： Yi-Ran Wang Fei zhang jian-min Gu Xiao-Yu Zhao Ran Zhao Xing Wang Tian-Hui Wu Jing Wang Ji-Dong Wang De-Song Wang State Key Laboratory of Metastable Materials Science and Technology(MMST) Hebei Key Laboratory of Applied ChemistryYanshan UniversityQinhuangdao 066004China Department of Food and Pharmaceutical Engineering Suihua UniversitySuihua 152000China School of Chemical Science and Engineering Tongji UniversityShanghai 200092China School of Sciences Hebei University of Science and TechnologyShijiazhuang 050018China

Superhydrophilic surfaces have been applied for supercapacitor;however,during energy storage reaction,how the wettability affects the process of electrochemical reaction specifically is still ***,we demonstrate superhydrophilic surface for promotion of electrochemical reactions by liquid affinity and further explain the mechanism,where the transition of the wettability state caused by the change in surface free energy is the main reason for the obvious increase in specific *** citric acid assistance strategy,an intrinsically hydrophobic Ni(OH)_(2)thick nanosheets(HNHTNs,16 nm)can be transitioned into superhydrophilic Ni(OH)_(2)ultrathin nanosheets(SNHUNs,6.8 nm),where the water contact angle was 0°and the surface free energy increased from 8.6to 65.8 mN·m^(-1),implying *** with HNHTNs,the specific capacitance of SNHUNs is doubled:from 1230 F·g^(-1)(HNHTNs)to 2350 F·g^(-1)(2A·g^(-1))and,even at 20 A·g^(-1),from 833 F·g^(-1)(HNHTNs)to 1670 F·g^(-1).The asymmetric capacitors assembled by SNHUNs and activated carbon show 52.44 Wh·kg^(-1)at 160W·kg^(-1)and excellent stability with~90%retention after5000 cycles(~80%retention after 9500 cycles).The promotion of electrochemical performances is ascribed to the change of surface wettability caused by surface free energy,which greatly increase affinity of electrode to the surrounding liquid environment to reduce the interface resistance and optimize the electron transport path.

关键词： Asymmetric supercapacitor Superhydrophilic interface Transition metal hydroxides Ultrathin nanosheets High specific capacitance

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Reaction mechanism between Al_(2)O_(3)–MgO refractory materials and rare earth high-carbon heavy rail steel

引用

Journal of Iron and Steel Research International 2024年第5期31卷 1153-1163页

作者： Yi Wang Guang-jie Song Ping Shen jian-zhong He Da-xian zhang jian-xun Fu Center for Advanced Solidification Technology(CAST) School of Materials Science and EngineeringState Key Laboratory of Advanced Special SteelShanghai UniversityShanghai200444China State Key Laboratory of Baiyunebo Rare Earth Resources Research and Comprehensive Utilization Baotou014030Inner MongoliaChina Inner Mongolia Baotou Steel Union Co. Ltd.Baotou014030Inner MongoliaChina

Submerged entry nozzle(SEN)clogging is a major problem affecting the production quality of rare earth steel,and finding a suitable refractory outlet can significantly reduce production *** explore the relationship between refractory composition and interface interaction,unprotected coated Al_(2)O_(3)–MgO refractories and SiO2-coated Al_(2)O_(3)–MgO refractories were added to rare earth high-carbon heavy rail steel under laboratory conditions,and the Al_(2)O_(3)–MgO refractory was found to be more *** results show that,from the epoxy resin side to the refractory side,the contour of the refractory interface reaction layer can be divided into two main layers:an iron-rich reaction layer and an iron-poor reaction *** based on the spherical model suggest that the adhesion force is proportional to the size of the refractory particles and inclusions,and the same result applies to the surface *** the inclusions at a smaller size has a specific effect on alleviating the erosion of *** with the erosion mechanism of Al_(2)O_(3)–MgO refractories,the interface reaction mechanism between Al_(2)O_(3)–MgO refractories and molten steel was proposed,which provides ideas for solving SEN clogging.

关键词： Rare earth high-carbon heavy rail steel Al_(2)O_(3)-MgO refractory Adhesion Surface tension Interface interaction

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Research on the MPPT of Photovoltaic Power Generation Based on Improved WOA and P&O under Partial Shading Conditions

引用

Energy Engineering 2024年第4期121卷 951-971页

作者： jian Zhong Lei zhang Ling Qin School of Electrical Engineering Nantong UniversityNantong226019China

Partial shading conditions(PSCs)caused by uneven illumination become one of the most common problems in photovoltaic(PV)systems,which can make the PV power-voltage(P-V)characteristics curve show *** maximum power point tracking(MPPT)methods have shortcomings in tracking to the global maximum power point(GMPP),resulting in a dramatic decrease in output *** order to solve the above problems,intelligent algorithms are used in ***,the existing intelligent algorithms have some disadvantages,such as slow convergence speed and large search ***,an improved whale algorithm(IWOA)combined with the P&O(IWOA-P&O)is proposed for the MPPT of PV power generation in this ***,IWOA is used to track the range interval of the GMPP,and then P&O is used to accurately find the MPP in that *** with other algorithms,simulation results show that this method has an average tracking efficiency of 99.79%and an average tracking time of 0.16 s when tracking ***,experimental verification is conducted,and the results show that the proposed algorithm has better MPPT performance compared to popular particle swarm optimization(PSO)and PSO-P&O algorithms.

关键词： Photovoltaic power generation maximum power point tracking whale algorithm perturbation and observation

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

粒状介质三维复杂应力加载离散元数值试验方法

引用

岩土力学 2018年第12期39卷 4681-4690页

作者：薛龙王睿张建民清华大学土木水利学院岩土工程研究所北京100084 清华大学城市轨道交通绿色与安全建造技术国家工程实验室北京100084

实际荷载条件下(如交通、地震荷载),粒状岩土材料常受到三维复杂应力路径作用。目前,多数粒状岩土材料的本构理论和模型都基于简单应力路径加载条件下的物理试验提出,在更加复杂应力路径下的适用性则需要进一步验证。但受机械控制的限制... 详细信息

实际荷载条件下(如交通、地震荷载),粒状岩土材料常受到三维复杂应力路径作用。目前,多数粒状岩土材料的本构理论和模型都基于简单应力路径加载条件下的物理试验提出,在更加复杂应力路径下的适用性则需要进一步验证。但受机械控制的限制,物理试验中无法实现很多客观存在的三维复杂应力路径加载。为了能够再现并分析三维复杂应力路径下粒状介质的力学响应,提出了一种离散元数值试验方法,该方法采用球形数值试样,通过直接控制试样边界应力达到对3个主应力大小和方向的任意控制,从而可以实现诸多物理试验中无法实现的复杂应力路径。通过与目前常见的一些物理试验进行定性对比,论证了该数值试验方法通过高精度的加载控制和测量能够再现已有物理试验现象。在此基础上,进一步开展了应力主轴的三维旋转,分析了在这种实际存在却无法通过物理试验再现的加载条件下粒状介质的变形规律,初步显示了提出的数值试验方法在深入研究三维复杂应力路径下粒状介质力学响应方面所拥有的能力和优势。

关键词：粒状介质数值试验离散元三维复杂应力路径

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：