检索结果-南通市图书馆

Journal of materials Science & Technology 2018年第1期34卷 219-227页

作者： J. zhang X.S. Feng J.S. Gao H. Huang z.q. ma L.J. Guo Technical Center Shanghai Aerospace Equipments Manufacturer Shanghai 200245. China

In this study, the effects of main welding parameters （rotation speed （ω） and welding speed （υ）） on the microstructure, micro-hardness distribution and tensile properties of friction stir welded （FSW） 2195-T8 Al-Li alloy were investigated. The effects of T6 post-treatments at different solution and aging conditions on the mechanical properties and microstructure characteristics of the FSW joints were also investigated. The results show that with increasing to and v, both strength and elongation of the joints increase first, and then decrease with further increase of ω and υ. All the joints under varied welding parameters show significant strength loss, and the strength reaches only 65% of the base metal, The effect of T6 post-heat treatment on the mechanical properties of the joints depends on the solution and aging conditions. Two heat treatment processes （480 ℃×0.5 h quenching＋ 180 ℃× 12 h, 520 ℃× 0.5 h quenching＋ 180 ℃×12h aging） are found to increase the joint strength. Furthermore, low temperature quenching （480℃） is more beneficial to the joint strength. The joint strength can reach 85% of the base metal. Whereas both low temperature aging （140 ℃× 56h） and stepped aging （ 100 ℃× 12 h ＋ 180 ℃× 3 h） processes decrease the joint strength. After heat treatment all the joints show decreased ductility due to the obvious grain coarsening in the nugget zone （Nz） and thermo-mechanically affected zone （Tmaz）.

关键词： 2195-T8 Al-Li alloy Friction stir welding Welding parameters Post-heat treatment

Precipitation of multi-type nano-quasicrystals in a Mg-zn-Y alloy

在线全文

学校读者我要写书评

暂无评论

Journal of magnesium and Alloys 2024年第3期12卷 997-1008页

作者： W.z.Wang X.z.zhou L.F.zhang H.q.Ye z.q.Yang Shenyang National Laboratory for materials Science Institute of Metal ResearchChinese Academy of ScienceShenyang 110016China Ji Hua Laboratory Foshan 528251China Foshan University Foshan 528231China

Mg-6zn-1Y(at.%)ribbons with strengthening precipitates of multi-type nanoquasicrystals were prepared by melt-spinning followed by aging *** evolution of the rapidly solidified ribbons during isothermal aging was comprehensively studied using various electron microscopy *** new kinds of decagonal quasicrystals were formed in aged ribbons,in addition to precipitation of nanometer icosahedral ***-resolution observations reveal that both decagonal quasicrystals can be modeled by quasiperiodic tiling with decagonal clusters of 2.5 nm in diameter,but overlap of neighboring clusters in both decagonal quasicrystals is different from the Gummelt model observed in other quasicrystals.A shell composed of complex Laves Mg-zn domains was formed surrounding each decagonal quasicrystal precipitate upon prolonged *** addition,all kinds of nanoprecipitates exhibit excellent structure and size stability at 573 *** findings may have implications for not only fundamental studies about quasicrystals,but also microstructural manipulation of high-performance Mg alloys.

关键词： quasicrystal Mg alloys Rapid solidification Scanning-transmission electron microscopy.

Probing the Bardeen-Kiselev black hole with the cosmological constant caused by Einstein equations coupled with nonlinear electrodynamics using quasinormal modes and greybody bounds

在线全文

学校读者我要写书评

暂无评论

Communications in Theoretical Physics 2024年第6期76卷 102-119页

作者： S R Wu B q Wang z W Long College of Physics Guizhou UniversityGuiyang 550025China College Pharmacy Guizhou University of Traditional Chinese MedicineGuiyang 550025China

In this work,we investigate a static and spherically symmetric Bardeen-Kiselev black hole(BH)with the cosmological constant,which is a solution of the Einstein-non-linear maxwell field *** compute the quasinormal frequencies for the Bardeen-Kiselev BH with the cosmological constant due to electromagnetic and gravitational *** varying the BH parameters,we discuss the behavior of both real and imaginary parts of the BH quasinormal frequencies and compare these frequencies with the Reissner-Nordström-de Sitter BH surrounded by quintessence(RN-dSq).Interestingly,it is shown that the responses of the Bardeen-Kiselev BH with the cosmological constant and the RN-dSq under electromagnetic perturbations are different when the charge parameter q,the state parameter w and the normalization factor c are varied;however,for the gravitational perturbations,the responses of the Bardeen-Kiselev BH with the cosmological constant and the RN-dSq are different only when the charge parameter q is ***,compared with the gravitational perturbations,the electromagnetic perturbations can be used to understand nonlinear and linear electromagnetic fields in curved spacetime *** interesting observation is that,due to the presence of Kiselev quintessence,the electromagnetic perturbations around the Bardeen-Kiselev BH with the cosmological constant damps faster and oscillates slowly;for the gravitational perturbations,the quasinormal mode decays slowly and oscillates *** also study the reflection and transmission coefficients along with the absorption cross section in the Bardeen-Kiselev BH with the cosmological constant;it is shown that the transmission coefficients will increase due to the presence of Kiselev quintessence.

关键词： quasinormal modes greybody factors Bardeen-Kiselev black hole with cosmological constant

Effect of Al_(2)O_(3)on the Mechanical Properties of(B_(4)C+Al_(2)O_(3))/Al Neutron Absorbing materials

在线全文

学校读者我要写书评

暂无评论

Acta Metallurgica Sinica(English Letters) 2024年第8期37卷 1411-1420页

作者： J.X.Cai B.M.Shi N.Li Y.Liu z.G.zhang Y.N.zan q.z.Wang B.L.Xiao z.Y.ma Shi‑Changxu Innovation Center for Advanced materials Institute of Metal ResearchChinese Academy of SciencesShenyang 110016China Key Laboratory of Nuclear materials and Safety Assessment Institute of Metal ResearchChinese Academy of SciencesShenyang 110016China Nuclear Equipment Division Beijing Institute of Nuclear EngineeringChina Nuclear Power Engineering Co.Ltd.Beijing 100840China Department of materials Science School of Mechanical EngineeringShenyang UniversityShenyang 110044China

B_(4)C/Al composites are widely utilized as neutron absorbing materials for the storage and transportation of spent nuclear *** order to improve the high-temperature mechanical properties of B_(4)C/Al composites,in-situ nano-Al_(2)O_(3)was introduced utilizing oxide on Al powder *** this study,the Al_(2)O_(3)content was adjusted by utilizing spheroid Al powder with varying diameters,thereby investigating the impact of Al_(2)O_(3)content on the tensile properties of(B_(4)C+Al_(2)O_(3))/Al *** was found that the pinning effect of Al_(2)O_(3)on the grain boundaries could hinder the recovery of dislocations and lead to dislocation accumulation at high *** the result,with the increase in Al_(2)O_(3)content and the decrease in grain size,the high-temperature strength of the composites increased *** finest Al powder used in this investigation had a diameter of 1.4μm,whereas the resultant composite exhibited a maximum strength of 251 MPa at room temperature and 133 MPa at 350℃,surpassing that of traditional B_(4)C/Al composites.

关键词： Al matrix composites Neutron absorbing materials (B_(4)C+Al_(2)O_(3))/Al composites High-temperature strength

Rational design of AgGaS/znS/znS quantum dots with a near-unity photoluminescence quantum yield via double shelling scheme

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of materials Science & Technology 2024年第2期169卷 235-242页

作者： H.X.Lu H.Liu z.z.Fu Y.Y.Chen H.q.Dai z.Hu W.L.zhang R.q.Guo Institute for Electric Light Sources School of Information Science and TechnologyFudan UniversityShanghai 200433China Institute of Future Lighting Academy for Engineering and TechnologyFudan UniversityShanghai 200433China Yiwu Research Institute of Fudan University YiwuZhejiang 322000China zhongshan-Fudan Joint Innovation Center Zhongshan 528437China

In this study,a two-step method was used to synthesize highly luminescent AgGaS/znS/znS quantum dots(qDs).In the first step,an inner znS shell was formed via a one-pot method,which resulted in a smaller lattice mismatch between the AgGaS core and the outer znS shell,thereby facilitating the formation of a thick outer *** the two-step shelling process,the synthesized AgGaS/znS/znS qDs showed an excellent photoluminescence quantum yield(PLqY)of 96.4%with a peak wavelength of 508 nm,repre-senting the highest PLqY reported thus far for AgGaS ***,the effect of halogen ions in zn precursors on the shelling process was *** was proposed that the capacity of halogen ions to coordinate with the qDs influenced the balance between zn cation diffusion and znS shelling ***,the znS shelling reaction was dominant when znCl_(2)was employed,while zn cation diffusion was the dominant process under the I^(−)-rich *** work provides insights into the interfacial restructuring during the znS shelling and offers a clear map for the tailored synthesis of core/shell qDs.

关键词： AgGaS quantum dots Photoluminescence Core/shell Alloyed core/shell interface

Simulation Analysis of Deformation Control for magnetic Soft Medical Robots

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

IEEE/CAA Journal of Automatica Sinica 2024年第3期11卷 794-796页

作者： Jingxi Wang Baoyu Liu Edmond q.Wu Jin ma Ping Li Key Laboratory of Biomechanics and Mechanobiology(Beihang University) Ministry of Education Beijing Advanced Innovation Center for Biomedical Engineeringthe School of Biological Science and Medical EngineeringBeihang UniversityBeijing100083China IEEE the Department of Automation Shanghai Jiao Tong UniversityShanghai 200240China the Department of Aerospace Medicine Air Force Medical UniversityXi’an 710032China

Dear Editor,This letter presents a biocompatible cross-shaped magnetic soft robot and investigates its deformation mode control strategy through COMSOL modeling and *** soft robots offer novel avenues for precise trea... 详细信息

关键词： robot simulation COMSOL

In situ digital testing method for quality assessment of soft soil improvement with polyurethane

在线全文

学校读者我要写书评

暂无评论

Journal of Rock Mechanics and Geotechnical Engineering 2024年第5期16卷 1732-1748页

作者： X.F.Wang C.J.Wang W.V.Yue z.J.zhang z.q.Yue Department of Civil Engineering China University of Geosciences (Beijing)BeijingChina Department of Water Science and Engineering Zhengzhou UniversityZhengzhouChina Department of Geotechnical Engineering Tongji UniversityShanghaiChina Department of Civil Engineering The University of Hong KongChina

This study purposes an in situ testing method on quality assessment of soil *** drilling data includes the spatial distribution and in situ strength of untreated and treated soil along three different drillholes measured by on-site drilling monitoring *** factual drilling data can characterize the degree of soil improvement by penetration injection with permeable *** from on-site drilling monitoring shows that the linear zones represent constant drilling speeds shown in the plot of drill bit advancement *** drilling time,which indicates the spatial distributions of soil *** soil profile at the study site is composed of four layers,which includes fill,untreated silty clay,treated silty clay,and mucky *** results of soil profile are verified by the parallel site *** constant drilling speeds profile the coring-resistant strength of drilled *** comparing with the untreated silty clay,the constant drilling speeds of the treated silty clay have been decreased by 13.0-62.8%.Two drilling-speed-based indices of 61.2%and 65.6%are proposed to assess the decreased average drilling speed and the increased in situ strength of treated silty *** tests,*** compressive strength(UCS)test,have been performed with core sample to investigate and characterize in situ strength by comparing that with drilling *** show that the average predicted strengths of treated silty clay are 2.4-6.9 times higher than the average measured strength of untreated silty *** UCS-based indices of 374.5%and 344.2%verified the quality assessment(qA)results by this new in situ *** method provides a cost-effective tool for quality assessment of soil improvement by utilizing the digital drilling data.

关键词： Drilling process monitoring system Hydraulic rotary drilling process Constant drilling speed Soil improvement quality assessment

In situ TEM investigation of electron irradiation and aging-induced high-density nanoprecipitates in an Mg-10Gd-3Y-1zn-0.5zr alloy

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of magnesium and Alloys 2024年第5期12卷 1841-1853页

作者： M.Lv H.L.Ge q.q.Jin X.H.Shao Y.T.zhou B.zhang X.L.ma Shenyang National Laboratory for materials Science Institute of Metal ResearchChinese Academy of Sciences72 Wenhua RoadShenyang 110016China School of materials Science and Engineering University of Science and Technology of ChinaShenyang 110016China materials Science and Engineering Research Center Guangxi University of Science and TechnologyLiuzhou 545006China

In-situ electron irradiation and aging are applied to introduce high-density precipitates in an Mg-10Gd-3Y-1zn-0.5zr(GWz1031K,wt.%)alloy to improve the *** results show that the hardness of the Mg alloy after irradiation for 10 h and aging for 9 h at 250℃ is 1.64 GPa,which is approximately 64% higher than that of the samples before being *** is mainly attributed to γ'precipitates on the basal plane after irradiation and the high-density nanoscale β'precipitates on the prismatic plane after aging,which should be closely related to the irradiation-induced homogenous *** latter plays a key role in precipitation *** result paves a way to improve the mechanical properties of metallic materials by tailoring the precipitation through irradiation and aging.

关键词： Mg alloy Electron beam irradiation Hardening Precipitates In-situ TEM

Microstructure evolution and shape memory behaviors of Ni_(47)Ti_(44)Nb_(9)alloy subjected to multistep thermomechanical loading with different prestrain levels

在线全文

学校读者我要写书评

暂无评论

Journal of materials Science & Technology 2024年第4期171卷 80-93页

作者： Y.H.zhang H.Li z.W.Yang X.Liu q.F.Gu State Key Laboratory of Solidification Processing School of Materials Science and EngineeringNorthwestern Polytechnical UniversityXi’an 710072China Shaanxi Key Laboratory of High-Performance Precision Forming Technology and Equipment Northwestern Polytechnical UniversityXi’an 710072China

Ni_(47)Ti_(44)Nb_(9)shape memory alloy(Sma)is a promising material in the aerospace field due to its wide transformation *** application of shape memory effect depends on multistep thermomechan-ical loading,viz.,low-temperature deformation and subsequent heating to ***-temperature deformation prestrain plays a pivotal role in shape memory properties tailoring of Sma ***,microstructure evolution and deformation mechanisms of Ni_(47)Ti_(44)Nb_(9)Sma subjected to vari-ous prestrain levels are still *** this end,microstructure evolution and shape memory behaviors of Ni_(47)Ti_(44)Nb_(9)alloy subjected to multistep thermomechanical loading with prestrain levels of 8%-16%at-28℃(M_(s)+30℃)were *** results demonstrate that the stress-strain curve of the specimen exhibits four distinct stages at a maximal prestrain of 16%.Whereas stageⅡand stageⅢend at prestrains of∼8%and∼12%,*** stageⅡ,the stress-induced martensitic transformation is accompanied by the dislocation slip of the NiTi matrix andβ-Nb *** stageⅢ,in addition to the higher density of dislocations and further growth of stress-induced martensite variants(SIMVs),(001)compound twins are introduced as a result of the(001)deformation twinning in stress-induced ***{20-1}martensite twins are gradually introduced in stageⅣ.Correspondingly,after subsequent unloading and heating,a higher density of{114}austenite twins form in the specimen with a larger prestrain of 16%.With increasing prestrain from 8%to 16%,the recoverable strainε_(re)^(T)upon heating increases first and then ***ε_(re)^(T)obtains a maximum of 7.03%at 10%prestrain and de-creases to 6.17%at 16%*** increase ofε_(re)^(T)can be attributed to the formation of new SIMVs,the further growth of existing SIMVs,and the recoverable(001)compound *** the decrease ofε_(re)^(T)is mainly associated with the irrecoverable strain by{20−1}martensite *** effe

关键词： Ni_(47)Ti_(44)Nb_(9)shape memory alloy Wide transformation hysteresis Thermomechanical loading Microstructure evolution Shape memory behaviors Stress-induced martensitic transformation Deformation twinning

Electromagnetic Performance Analysis of Variable Flux Memory machines with Series-magnetic-circuit and Different Rotor Topologies

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

CES Transactions on Electrical machines and Systems 2024年第1期8卷 3-11页

作者： qiang Wei z.q.zhu Yan Jia Jianghua Feng Shuying Guo Yifeng Li Shouzhi Feng Department of Electronic and Electrical Engineering The University of SheffieldSheffield S13JDU.K. IEEE the CRRC zhuzhou Institute Company Ltd. Zhuzhou 412001China

In this paper,the electromagnetic performance of variable flux memory(VFM)machines with series-magnetic-circuit is investigated and compared for different rotor *** on a V-type VFM machine,five topologies with different interior permanent magnet(IPM)arrangements are evolved and optimized under same *** on two-dimensional(2-D)finite element(FE)method,their electromagnetic performance at magnetization and demagnetization states is *** reveals that the iron bridge and rotor lamination region between constant PM(CPM)and variable PM(VPM)play an important role in torque density and flux regulation(FR)***,the global efficiency can be improved in VFM machines by adjusting magnetization state(MS)under different operating conditions.

关键词： Memory machine Permanent magnet Rotor topologies Series magnetic circuit Variable flux