检索结果-南通市图书馆

Advances in Applied Mathematics and Mechanics 2022年第6期14卷 1381-1399页

作者： J.W.Wu H.M.Xia z.p.wang W.wang H.J.Du School of Mechanical Engineering Nanjing University of Science and TechnologyNanjingJiangsu 210094China Singapore Institute of Manufacturing Technology 73 Nanyang DriveSingapore 637662Singapore School of Mechanical and Aerospace Engineering Nanyang Technological University50 Nanyang AvenueSingapore 639798Singapore

Numerical study on dynamic hydroelastic problems is usually rather complex due to the coupling of fluid and solid mechanics.Here,we demonstrate that the performance of a hydroelastic microfluidic oscillator can be analyzed using a simple equivalent circuit model.previous studies reveal that its transition from the steady state to the oscillation state follows the negative-differential-resistance(NDR)mechanism.The performance is mainly determined by a bias fluidic resistor,and a pressurevariant resistor which further relates to the bending stiffness of the elastic diaphragm and the depth of the oscillation chamber.In this work,a numerical study is conducted to examine the effects of key design factors on the device robustness,the applicable fluid viscosity,the flow rate,and the transition pressure.The underlying physics is interpreted,providing a new perspective on hydroelastic oscillation problems.Relevant findings also provide design guidelines of the NDR fluidic oscillator.

关键词： Microfluidic oscillator hydroelastics equivalent circuit model negative differential resistance

precipitation of multi-type nano-quasicrystals in a Mg-zn-Y alloy

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2024年第3期12卷 997-1008页

作者： W.z.wang X.z.zhou L.F.zhang H.Q.Ye z.Q.Yang Shenyang National Laboratory for Materials Science Institute of Metal ResearchChinese Academy of ScienceShenyang 110016China Ji Hua Laboratory Foshan 528251China Foshan University Foshan 528231China

Mg-6zn-1Y(at.%)ribbons with strengthening precipitates of multi-type nanoquasicrystals were prepared by melt-spinning followed by aging treatments.Microstructural evolution of the rapidly solidified ribbons during isothermal aging was comprehensively studied using various electron microscopy techniques.Two new kinds of decagonal quasicrystals were formed in aged ribbons,in addition to precipitation of nanometer icosahedral quasicrystals.Atomic-resolution observations reveal that both decagonal quasicrystals can be modeled by quasiperiodic tiling with decagonal clusters of 2.5 nm in diameter,but overlap of neighboring clusters in both decagonal quasicrystals is different from the Gummelt model observed in other quasicrystals.A shell composed of complex Laves Mg-zn domains was formed surrounding each decagonal quasicrystal precipitate upon prolonged aging.In addition,all kinds of nanoprecipitates exhibit excellent structure and size stability at 573 K.Our findings may have implications for not only fundamental studies about quasicrystals,but also microstructural manipulation of high-performance Mg alloys.

关键词： Quasicrystal Mg alloys Rapid solidification Scanning-transmission electron microscopy.

维普期刊数据库

Flat Band and η-pairing States in a One-Dimensional MoiréHubbard Model

在线全文

学校读者我要写书评

暂无评论

Chinese physics Letters 2024年第4期41卷 69-76页

作者：王冉宋智 College of physics and Materials Science Tianjin Normal UniversityTianjin 300387China School of physics Nankai UniversityTianjin 300071China

A Moirésystem is formed when two periodic structures have a slightly mismatched period,resulting in unusual strongly correlated states in the presence of particle-particle interactions.The periodic structures can arise from the intrinsic crystalline order and periodic external field.We investigate a one-dimensional Hubbard model with periodic on-site potential of period n_(0),which is commensurate to the lattice constant.For large n_(0),the exact solution demonstrates that there is a midgap flat band with zero energy in the absence of Hubbard interaction.Each Moiréunit cell contributes two zero energy levels to the flat band.In the presence of Hubbard interaction,the midgap physics is demonstrated to be well described by a uniform Hubbard chain in which the effective hopping and on-site interaction strength can be controlled by the amplitude and period of the external field.Numerical simulations are performed to demonstrate the correlated behaviors in the finite-sized Moiré Hubbard system,including the existence of an η-pairing state and bound pair oscillation.This finding provides a method to enhance the correlated effect by a spatially periodic external field.

关键词： oscillation interaction field

维普期刊数据库

In situ digital testing method for quality assessment of soft soil improvement with polyurethane

在线全文

学校读者我要写书评

暂无评论

Journal of Rock Mechanics and Geotechnical Engineering 2024年第5期16卷 1732-1748页

作者： X.F.wang C.J.wang W.V.Yue z.J.zhang z.Q.Yue Department of Civil Engineering China University of Geosciences (Beijing)BeijingChina Department of Water Science and Engineering Zhengzhou UniversityZhengzhouChina Department of Geotechnical Engineering Tongji UniversityShanghaiChina Department of Civil Engineering The University of Hong KongChina

This study purposes an in situ testing method on quality assessment of soil improvement.Factual drilling data includes the spatial distribution and in situ strength of untreated and treated soil along three different drillholes measured by on-site drilling monitoring method.These factual drilling data can characterize the degree of soil improvement by penetration injection with permeable polyurethane.Result from on-site drilling monitoring shows that the linear zones represent constant drilling speeds shown in the plot of drill bit advancement *** drilling time,which indicates the spatial distributions of soil profile.The soil profile at the study site is composed of four layers,which includes fill,untreated silty clay,treated silty clay,and mucky soil.The results of soil profile are verified by the parallel site loggings.The constant drilling speeds profile the coring-resistant strength of drilled soils.By comparing with the untreated silty clay,the constant drilling speeds of the treated silty clay have been decreased by 13.0-62.8%.Two drilling-speed-based indices of 61.2%and 65.6%are proposed to assess the decreased average drilling speed and the increased in situ strength of treated silty clay.Laboratory tests,i.***.uniaxial compressive strength(UCS)test,have been performed with core sample to investigate and characterize in situ strength by comparing that with drilling speeds.Results show that the average predicted strengths of treated silty clay are 2.4-6.9 times higher than the average measured strength of untreated silty clay.The UCS-based indices of 374.5%and 344.2%verified the quality assessment(QA)results by this new in situ method.This method provides a cost-effective tool for quality assessment of soil improvement by utilizing the digital drilling data.

关键词： Drilling process monitoring system Hydraulic rotary drilling process Constant drilling speed Soil improvement Quality assessment

Investigation of Microstructure, Microhardness and Thermal properties of Ag-In Intermetallic Alloys prepared by Vacuum Arc Meltings

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Wuhan University of Technology(Materials Science) 2024年第1期39卷 182-187页

作者： ÇELİK Erçevik ATA ESENER pınar ÖzTÜRK Esra AKSÖz Sezen Nevşehir HacıBektaşVeli University Department of Physics50300NevşehirTurkey Erciyes University Graduate School of Natural and Applied Sciences38039KayseriTurkey Kocaeli University Department of Physics41380KocaeliTurkey

Ag-In intermetallic alloys were produced by using vacuum arc furnace. Differential Scanning Calorimetry(DSC) and Energy Dispersive X-Ray Spectrometry(EDX) were used to determine the thermal properties and chemical composition of the phases respectively. Microhardness values of Ag-In intermetallics were calculated with Vickers hardness measurement method. According to the experimental results, Ag-34 wt%In intermetallic system generated the best results of energy saving and storage compared to other intermetallic systems. Also from the microhardness results, it was observed that intermetallic alloys were harder than pure silver and Ag-26 wt%In system had the highest microhardness value with 143.45 kg/mm^(2).

关键词： thermal properties microstructure characterization microhardness alloys material characterization

维普期刊数据库

Stability Investigation and Improvement for DC Cascade Systems with Simplified Impedance-based Stability Criterion

在线全文

学校读者我要写书评

暂无评论

CSEE Journal of power and Energy Systems 2024年第3期10卷 1044-1052页

作者： Junbin Fang zhikang Shuai Yang Li zhibing wang Xiangyang Wu Xia Shen z.John Shen College of Electrical and Information Engineering Hunan UniversityChangsha 410082China Renewable Energy Department of China Electric power Research Institute Beijing 100192China Department of Electrical and Computer Engineering Illinois Institute of TechnologyChicagoIL 60616USA IEEE

In DC distributed power systems(DpSs),the complex impedance interactions possibly lead to DC bus voltage oscillation or collapse.In previous research,the stability analysis of DpSs is implemented based on mathematical analysis in control theory.The specific mechanisms of the instability of the cascade system have not been intuitively clarified.In this paper,the stability analysis of DpSs based on the traditional Nyquist criterion is simplified to the resonance analysis of the seriesconnected port impedance(z=R+jX)of source and load converters.It reveals that the essential reason for impedance instability of a DC cascade system is that the negative damping characteristic(Rport the overall impedance amplifies the internal resonance source at reactance zero-crossing frequency.The simplified stability criterion for DC cascade systems can be concluded as:in the negative damping frequency ranges(Rzero-crossing point of the reactance component(i.e.,X=0).According to the proposed stability criterion,the oscillation modes of cascade systems are classified.A typical one is the internal impedance instability excited by the negative damping,and the other one is that the external disturbance amplified by negativity in a low stability margin.Thus,the impedance reshaping method for stability improvement of the system can be further specified.The validity of the simplified criterion is verified theoretically and experimentally by a positive damping reshaping method.

关键词： DC cascaded system,impedance model impedance reconstruction stability criterion

Fast efficient photon deceleration in plasmas by using two laser pulses at different frequencies

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Matter and Radiation at Extremes 2024年第3期9卷 11-18页

作者： Y.X.wang X.L.zhu S.M.Weng p.Li X.F.Li H.Ai H.R.pan z.M.Sheng Key Laboratory for Laser plasmas(moe) School of Physics and AstronomyShanghai Jiao Tong UniversityShanghai 200240China Collaborative Innovation Center of IFSA Shanghai Jiao Tong UniversityShanghai 200240China Research Center of Laser Fusion of China Academy of Engineering physics MianyangSichuan 621900China State key Laboratory of High Field Laser physics Shanghai Institute of Optics and Fine MechanicsChinese Academy of SciencesShanghai 201800China Tsung-dao Lee Institute Shanghai Jiao Tong UniversityShanghai 200240China

The generation of ultrashort high-power light sources in the mid-infrared(mid-IR)to terahertz(THz)range is of interest for applications in a number of fields,from fundamental research to biology and medicine.Besides conventional laser technology,photon deceleration in plasma wakes provides an alternative approach to the generation of ultrashort mid-IR or THz pulses.Here,we present a photon deceleration scheme for the efficient generation of ultrashort mid-IR or THz pulses by using an intense driver laser pulse with a relatively short wavelength and a signal laser pulse with a relatively long wavelength.The signal pulse trails the driver pulse with an appropriate time delay such that it sits at the front of the second wake bubble that is driven by the driver pulse.Owing to its relatively long wavelength,the signal pulse will be subjected to a large gradient of the refractive index in the plasma wake bubble.Consequently,the photon deceleration in the plasma wake becomes faster and more efficient for signal pulses with longer wavelengths.This greatly enhances the capacity and efficiency of photon deceleration in the generation of ultrashort high-power light sources in the long-wavelength IR and THz spectral ranges.

关键词： laser ultrashort photon

Construction of 2D/2D Ti_(3)C_(2)T_(x)MXene/CdS heterojunction with photothermal effect for efficient photocatalytic hydrogen production

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2024年第4期171卷 1-9页

作者： T.Y.Huang z.Yang S.Y.Yang z.H.Dai Y.J.Liu J.H.Liao G.Y.zhong z.J.Xie Y.p.Fang S.S.zhang Key Laboratory for Biobased Materials and Energy of Ministry of Education Guangdong Laboratory for Lingnan Modern AgricultureCollege of Materials and EnergySouth China Agricultural UniversityGuangzhou 510643China School of physics and Optoelectronics South China University of TechnologyGuangzhou 510640China School of Chemical Engineering and Energy Technology Guangdong Provincial Key Laboratory of Distributed Energy SystemsDongguan University of TechnologyDongguan 523808China

The insensitivity of semiconductors to visible and infrared light is a key constraint on the utilization of light energy in photocatalytic reactions.Constructing photocatalysts with full-spectrum absorption through surface engineering is an effective approach to fully harnessing light energy in semiconductor materials.Herein,a novel stable Ti_(3)C_(2)T_(x)MXene/CdS heterojunction catalyst is obtained by in-situ epitaxial growth of two-dimensional(2D)CdS nanosheets on 2D MXene interface via a solvothermal method.The exceptional light absorption properties of MXene confer outstanding full-spectrum driven photocat-alytic hydrogen evolution capability upon the heterogeneous catalyst.The unique 2D/2D structure effectively mitigated the recombination of photogenerated carriers,enhancing the photocatalytic performance of the catalyst.Moreover,the composite catalyst exhibits a significantly higher surface temperature of 80.4℃under visible light irradiation at an intensity of 0.1 W/cm^(2),which is 1.84 times higher than that of CdS.Under irradiation of visible and near infrared light,the composite catalyst with photothermal ef-fect demonstrates a remarkable hydrogen evolution rate of 65.4 mmol g^(-1)h^(-1),which is 7.2 times higher than that of CdS catalyst.This study introduces a novel approach for constructing full-spectrum absorption catalysts and expands the application of the photothermal effect in photocatalytic hydrogen evolution research.

关键词： Two-dimensional structure Heterostructure photothermal effect photocatalyst Hydrogen evolution

post-layout simulation driven analog circuit sizing

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Science China(Information Sciences) 2024年第4期67卷 289-300页

作者： Xiaohan GAO Haoyi zHANG Siyuan YE Mingjie LIU David z.pAN Linxiao SHEN Runsheng wang Yibo LIN Ru HUANG School of Integrated Circuits Peking University School of Computer Science Peking University Department of Electrical and Computer Engineering University of Texas at Austin Institute of Electronic Design Automation Peking University

post-layout simulation provides accurate guidance for analog circuit design, but post-layout performance is hard to be directly optimized at early design stages. prior work on analog circuit sizing often utilizes pre-layout simulation results as the optimization objective. In this work, we propose a post-layoutsimulation-driven(post-simulation-driven for short) analog circuit sizing framework that directly optimizes the post-layout simulation performance. The framework integrates automated layout generation into the optimization loop of transistor sizing and leverages a coupled Bayesian optimization algorithm to search for the best post-simulation performance. Experimental results demonstrate that our framework can achieve over 20% better post-layout performance in competitive time than manual design and the method that only considers pre-layout optimization.

关键词： analog EDA transistor sizing Bayesian optimization post-layout simulation

Effects of exosomes from mesenchymal stem cells on functional recovery of a patient with total radial nerve injury: A pilot study

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

World Journal of Stem Cells 2024年第1期16卷 19-32页

作者： ErdinçCivelek Serdar Kabatas Eyüp Can Savrunlu Furkan Diren Necati Kaplan Demet Ofluoğlu Erdal Karaöz Department of Neurosurgery University of Health SciencesGaziosmanpaşa Training and Research HospitalGaziosmanpaşa 34255IstanbulTurkey Department of Neurosurgery University of Health Sciences TurkeyGaziosmanpaşa Training and Research HospitalGaziosmanpaşa 34255IstanbulTurkey Center for Stem Cell&Gene Therapy Research and practice University of Health Sciences TurkeyGaziosmanpaşa 34255IstanbulTurkey Department of Neurosurgery Nevşehir State HospitalNevşehir 50300Turkey Department of Neurosurgery Istanbul Rumeli UniversityÇorlu Reyap HospitalÇorlu 59860TekirdağTurkey Department of physical Medicine and Rehabilitation Ofluoğlu KlinikGöztepe 34728IstanbulTurkey Liv Hospital Center for Regenerative Medicine and Stem Cell Research&Manufacturing(LivMedCell)Beşiktaş34340IstanbulTurkey Department of Histology and Embryology Istinye UniversityFaculty of MedicineZeytinburnu 34010IstanbulTurkey Istinye University Center for Stem Cell and Tissue Engineering Research and PracticeBeşiktaş34340IstanbulTurkey

BACKGROUND peripheral nerve injury can result in significant clinical complications that have uncertain prognoses.Currently,there is a lack of effective pharmacological interventions for nerve damage,despite the existence of several small compounds,Despite the objective of achieving full functional restoration by surgical intervention,the persistent challenge of inadequate functional recovery remains a significant concern in the context of peripheral nerve injuries.AIM To examine the impact of exosomes on the process of functional recovery following a complete radial nerve damage.METHODS A male individual,aged 24,who is right-hand dominant and an immigrant,arrived with an injury caused by a knife assault.The cut is located on the left arm,specifically below the elbow.The neurological examination and electrodiagnostic testing reveal evidence of left radial nerve damage.The sural autograft was utilized for repair,followed by the application of 1 mL of mesenchymal stem cell-derived exosome,comprising 5 billion microvesicles.This exosome was split into four equal volumes of 0.25 mL each and delivered microsurgically to both the proximal and distal stumps using the subepineural pathway.The patient was subjected to a period of 180 d during which they had neurological examination and electrodiagnostic testing.RESULTS The duration of the patient’s follow-up period was 180 d.An increasing Tinel’s sign and sensory-motor recovery were detected even at the 10th wk following nerve grafting.Upon the conclusion of the 6-mo post-treatment period,an evaluation was conducted to measure the extent of improvement in motor and sensory functions of the nerve.This assessment was based on the British Medical Research Council scale and the Mackinnon-Dellon scale.The results indicated that the level of improvement in motor function was classified as M5,denoting an excellent outcome.Additionally,the level of improvement in sensory function was classified as S3+,indicating a good outcome.It is noteworthy that these assessments were conducte

关键词： Mesenchymal stem cell Exosomes Radial nerve Sural nerve