检索结果-南通市图书馆

Asymmetrical fault Current Calculation Method and Influencing factors Analysis of Droop-Controlled Inverters

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

CSEE Journal of Power and Energy Systems 2024年第2期10卷 562-573页

作者： Huimin zhao zhikang Shuai Jun Ge An Luo Weimin Wu z.John Shen College of Electrical and Information Engineering Hunan UniversityChangsha 410006China Electrical Engineering Department Shanghai Maritime UniversityShanghai 201306China Department of Electrical and Computer Engineering Ilinois Institute of TechnologyChicagoIL 60616 USA

Since the fault dynamic of droop-controlled inverter is different from synchronous generators (SGs), protection devices may become invalid, and the fault overcurrent may damage power electronic devices and threaten the safety of the microgrid. Therefore, it is imperative to conduct a comprehensive fault analysis of the inverter to guide the design of protection schemes. However, due to the complexity of droop control strategy, existing literatures have simplified asymmetric fault analysis of droop-controlled inverters to varying degrees. Therefore, accurate fault analysis of a droop-controlled inverter is needed. In this paper, by analyzing the control system, an accurate fault model is established. Based on this, a calculation method for instantaneous asymmetrical fault current is proposed. In addition, the current components and current characteristics are analyzed. It was determined that fault currents are affected by control loops, fault types, fault distance and nonlinear limiters. In particular, the influences of limiters on the fault model, fault current calculation and fault current characteristics were analyzed. Through detailed analysis, it was found that dynamics of the control loop cannot be ignored, the fault type and fault distance determine fault current level, and part of the limiters will totally change the fault current trend. finally, calculation and experimental results verify the correctness of the proposed method.

关键词： Asymmetrical fault analysis droop control fault current calculation method limiter transient fault characteristics

Precipitation of multi-type nano-quasicrystals in a Mg-zn-Y alloy

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2024年第3期12卷 997-1008页

作者： W.z.Wang X.z.zhou L.f.zhang H.Q.Ye z.Q.Yang Shenyang National Laboratory for Materials Science Institute of Metal ResearchChinese Academy of ScienceShenyang 110016China Ji Hua Laboratory Foshan 528251China foshan University Foshan 528231China

Mg-6zn-1Y(at.%)ribbons with strengthening precipitates of multi-type nanoquasicrystals were prepared by melt-spinning followed by aging *** evolution of the rapidly solidified ribbons during isothermal aging was comprehensively studied using various electron microscopy *** new kinds of decagonal quasicrystals were formed in aged ribbons,in addition to precipitation of nanometer icosahedral ***-resolution observations reveal that both decagonal quasicrystals can be modeled by quasiperiodic tiling with decagonal clusters of 2.5 nm in diameter,but overlap of neighboring clusters in both decagonal quasicrystals is different from the Gummelt model observed in other quasicrystals.A shell composed of complex Laves Mg-zn domains was formed surrounding each decagonal quasicrystal precipitate upon prolonged *** addition,all kinds of nanoprecipitates exhibit excellent structure and size stability at 573 *** findings may have implications for not only fundamental studies about quasicrystals,but also microstructural manipulation of high-performance Mg alloys.

关键词： Quasicrystal Mg alloys Rapid solidification Scanning-transmission electron microscopy.

New evidence for the epigenetic regulation of skeletal stem cells

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Science Bulletin 2024年第13期69卷 2004-2006页

作者： Liming zhao Jun Xiao Charles K.f.Chan Institute for Stem Cell Biology and Regenerative Medicine Stanford University School of MedicineStanford CA 94305USA Department of Surgery Division of Plastic and Reconstructive SurgeryStanford University School of MedicineStanford CA 94305USA Department of Orthopaedic Surgery Tongji HospitalTongji Medical CollegeHuazhong University of Science and TechnologyWuhan 430030China

Skeletal stem cells(SSCs)are crucial for skeletal development and regeneration,yet the epigenetic regulation of these cells remains poorly *** studies have delineated the epigenetic landscape across the developmental trajectory of SSCs,highlighting the involvement of Ptip in regulating SSC *** skeletal system undergoes dynamic remodeling throughout *** stem cells(SSCs),residing within the skeleton and lineage-restricted,serve as a cellular reserve to foster development and maintain skeletal *** categorized within the broader mesenchymal stromal/stem cells(MSCs).

关键词： skeletal involvement maintain

Connections Between Induction Generator Effect and Open-loop Modal Proximity to Cause Sub-synchronous Oscillations in Series-compensated Power System

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

CSEE Journal of Power and Energy Systems 2024年第3期10卷 963-973页

作者： Wenjuan Du Yang Wang H.f.Wang Tao zhao Tim Littler College of Electrical Engineering Sichuan UniversityChengduChina School of Electrical Engineering the Queen’s University of BelfastBelfastUK IEEE

The induction generator effect(IGE)and the openloop modal proximity(OLMP)are two different reasons why subsynchronous oscillations(SSOs)in a series-compensated power system(SCPS)may *** IGE attributes the growing SSOs to negative resistance,while the OLMP explains the SSO mechanism from the standpoint of modal *** this paper,we investigate the connections between the IGE and the OLMP through equivalent RLC circuit and open-loop modal *** investigation is conducted for two types of seriescompensated power systems where either a synchronous generator or a DfIG is connected at the sending *** investigation reveals the conditions,in which the IGE and the OLMP may jointly cause the growing SSOs,i.e.,both the IGE and the OLMP can explain why the growing SSOs ***,the investigation indicates that the IGE and the OLMP may be totally irrelevant and lead to growing SSOs *** implies that it is possible that in a SCPS,the growing SSOs are only due to the IGE,and the OLMP is non-existent,and vice ***,when the growing SSOs occurs in a SCPS,examination based on both the IGE and the OLMP should be carefully conducted in order to find if the oscillatory instability is due to the IGE,or the OLMP,or both of them.

关键词： Induction generator effect open-loop modal proximity series compensation sub-synchronous oscillations

In situ digital testing method for quality assessment of soft soil improvement with polyurethane

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Rock Mechanics and Geotechnical Engineering 2024年第5期16卷 1732-1748页

作者： X.f.Wang C.J.Wang W.V.Yue z.J.zhang z.Q.Yue Department of Civil Engineering China University of Geosciences (Beijing)BeijingChina Department of Water Science and Engineering Zhengzhou UniversityZhengzhouChina Department of Geotechnical Engineering Tongji UniversityShanghaiChina Department of Civil Engineering The University of Hong KongChina

This study purposes an in situ testing method on quality assessment of soil *** drilling data includes the spatial distribution and in situ strength of untreated and treated soil along three different drillholes measured by on-site drilling monitoring *** factual drilling data can characterize the degree of soil improvement by penetration injection with permeable *** from on-site drilling monitoring shows that the linear zones represent constant drilling speeds shown in the plot of drill bit advancement *** drilling time,which indicates the spatial distributions of soil *** soil profile at the study site is composed of four layers,which includes fill,untreated silty clay,treated silty clay,and mucky *** results of soil profile are verified by the parallel site *** constant drilling speeds profile the coring-resistant strength of drilled *** comparing with the untreated silty clay,the constant drilling speeds of the treated silty clay have been decreased by 13.0-62.8%.Two drilling-speed-based indices of 61.2%and 65.6%are proposed to assess the decreased average drilling speed and the increased in situ strength of treated silty *** tests,*** compressive strength(UCS)test,have been performed with core sample to investigate and characterize in situ strength by comparing that with drilling *** show that the average predicted strengths of treated silty clay are 2.4-6.9 times higher than the average measured strength of untreated silty *** UCS-based indices of 374.5%and 344.2%verified the quality assessment(QA)results by this new in situ *** method provides a cost-effective tool for quality assessment of soil improvement by utilizing the digital drilling data.

关键词： Drilling process monitoring system Hydraulic rotary drilling process Constant drilling speed Soil improvement Quality assessment

Modelling the brittle rock failure by the quaternion-based bonded-particle model in DEM

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Rock Mechanics Bulletin

Rock Mechanics Bulletin 2024年第2期3卷 87-95页

作者： Tao zhao Philip E.f.Collins Department of Civil and Environmental Engineering Brunel University LondonLondonUB83PHUnited Kingdom

This paper presents an investigation of brittle rock failure by the quaternion-based bonded-particle model in discrete element method(DEM).Unlike traditional approaches that utilize Euler angles or rotation matrices,this model employs unit quaternions to represent the spatial rotations of *** method simplifies the rep-resentation of 3D rotations,providing a more intuitive framework for modelling complex interactions in granular *** numerical model was validated by the uniaxial compression tests on rock,with good agreement with well-documented experimental data in terms of the rock uniaxial compression strength(UCS)and failure *** loading,the rock sample demonstrated a linear-elastic response at an axial strain of smaller than 0.45%.However,as internal bond breakage accumulated,this linear relationship weakened,and the stress-strain curve began to deviate from its initial linear *** bond breakage and the overall deformation of the rock were primarily controlled by the shear bonding *** UCS was achieved at an axial strain of 0.625%,at which point the internal shear bonding force chains were predominantly aligned *** brittle failure occurred when the internal damage of solids nucleated to form an interconnected failure plane,accompanied by a sharp rise in the internal damage *** area of failure plane increased with the loading strain rate,gradually transforming the failure pattern from the local damage to a complete fragmentation.

关键词： Brittle failure Quaternion DEM bonded model Uniaxial compression test Rate dependent Internal damage

Microstructure evolution and shape memory behaviors of Ni_(47)Ti_(44)Nb_(9)alloy subjected to multistep thermomechanical loading with different prestrain levels

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2024年第4期171卷 80-93页

作者： Y.H.zhang H.Li z.W.Yang X.Liu Q.f.Gu State Key Laboratory of Solidification Processing School of Materials Science and EngineeringNorthwestern Polytechnical UniversityXi’an 710072China Shaanxi Key Laboratory of High-Performance Precision forming Technology and Equipment Northwestern Polytechnical UniversityXi’an 710072China

Ni_(47)Ti_(44)Nb_(9)shape memory alloy(SMA)is a promising material in the aerospace field due to its wide transformation *** application of shape memory effect depends on multistep thermomechan-ical loading,viz.,low-temperature deformation and subsequent heating to ***-temperature deformation prestrain plays a pivotal role in shape memory properties tailoring of SMA ***,microstructure evolution and deformation mechanisms of Ni_(47)Ti_(44)Nb_(9)SMA subjected to vari-ous prestrain levels are still *** this end,microstructure evolution and shape memory behaviors of Ni_(47)Ti_(44)Nb_(9)alloy subjected to multistep thermomechanical loading with prestrain levels of 8%-16%at-28℃(M_(s)+30℃)were *** results demonstrate that the stress-strain curve of the specimen exhibits four distinct stages at a maximal prestrain of 16%.Whereas stageⅡand stageⅢend at prestrains of∼8%and∼12%,*** stageⅡ,the stress-induced martensitic transformation is accompanied by the dislocation slip of the NiTi matrix andβ-Nb *** stageⅢ,in addition to the higher density of dislocations and further growth of stress-induced martensite variants(SIMVs),(001)compound twins are introduced as a result of the(001)deformation twinning in stress-induced ***{20-1}martensite twins are gradually introduced in stageⅣ.Correspondingly,after subsequent unloading and heating,a higher density of{114}austenite twins form in the specimen with a larger prestrain of 16%.With increasing prestrain from 8%to 16%,the recoverable strainε_(re)^(T)upon heating increases first and then ***ε_(re)^(T)obtains a maximum of 7.03%at 10%prestrain and de-creases to 6.17%at 16%*** increase ofε_(re)^(T)can be attributed to the formation of new SIMVs,the further growth of existing SIMVs,and the recoverable(001)compound *** the decrease ofε_(re)^(T)is mainly associated with the irrecoverable strain by{20−1}martensite *** effe

关键词： Ni_(47)Ti_(44)Nb_(9)shape memory alloy Wide transformation hysteresis Thermomechanical loading Microstructure evolution Shape memory behaviors Stress-induced martensitic transformation Deformation twinning

Rescattering of stimulated Raman side scattering in nonuniform plasmas

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Matter and Radiation at Extremes 2024年第5期9卷 68-76页

作者： S.Tan Q.Wang Y.Chen W.B.Yao C.z.Xiao J.f.Myatt School of Physics and Electronics Hunan UniversityChangsha 410082China Institute of Applied Physics and Computational Mathematics Beijing 100094China School of Electrical and Information Engineering Anhui University of Science and TechnologyHuainanAnhui 232001China Department of Electrical and Computer Engineering University of Alberta9211116 St.NWEdmontonAlberta T6G 1H9Canada

Rescattering of stimulated Raman side scattering(SRSS)is observed for the first time via two-dimensional(2D)particle-in-cell(PIC)*** construct a theoretical model for the rescattering process,which can predict the region of occurrence of mth-order SRSS and estimate its *** rescattering process is identified by the 2D PIC simulations under typical conditions of a direct-drive inertial confinement fusion *** electrons produced by second-order SRSS propagate nearly perpendicular to the density gradient and gain nearly the same energy as in first-order SRSS,but there is no cascade acceleration to produce superhot *** studies for a wide range of ignition conditions show that SRSS and associated rescatterings are robust and important processes in inertial confinement fusion.

关键词： nonuniform acceleration scattering

Intuitive Human-Robot-Environment Interaction With EMG Signals:A Review

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

IEEE/CAA Journal of Automatica Sinica 2024年第5期11卷 1075-1091页

作者： Dezhen Xiong Daohui zhang Yaqi Chu Yiwen zhao Xingang zhao State Key Laboratory of Robotics Shenyang Institute of AutomationChinese Academy of SciencesShenyang 110016 Institutes for Robotics and Intelligent Manufacturing Chinese Academy of SciencesShenyang 110169 University of Chinese Academy of Sciences Beijing 100049China

A long history has passed since electromyography(EMG)signals have been explored in human-centered robots for intuitive ***,it still has a gap between scientific research and real-life *** studies mainly focused on EMG decoding algorithms,leaving a dynamic relationship between the human,robot,and uncertain environment in real-life scenarios seldomly *** fill this gap,this paper presents a comprehensive review of EMG-based techniques in human-robot-environment interaction(HREI)*** general processing framework is summarized,and three interaction paradigms,including direct control,sensory feedback,and partial autonomous control,are ***-based intention decoding is treated as a module of the proposed *** key issues involving precision,stability,user attention,compliance,and environmental awareness in this field are *** important directions,including EMG decomposition,robust algorithms,HREI dataset,proprioception feedback,reinforcement learning,and embodied intelligence,are proposed to pave the way for future *** the best of what we know,this is the first time that a review of EMG-based methods in the HREI system is *** provides a novel and broader perspective to improve the practicability of current myoelectric interaction systems,in which factors in human-robot interaction,robot-environment interaction,and state perception by human sensations are considered,which has never been done by previous studies.

关键词： robot summarized Robot