检索结果-南通市图书馆

Recent advances and future prospects on Ni_(3)S_(2)-Based electrocatalysts for efficient alkaline water electrolysis

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Green Energy & Environment 2024年第4期9卷 659-683页

作者： Shiwen wang Zhen Geng Songhu Bi yuwei wang Zijian Gao Liming Jin Cunman Zhang Clean Energy Automotive Engineering Center School of Automotive StudiesTongji UniversityShanghai201804China

Green hydrogen(H_(2))produced by renewable energy powered alkaline water electrolysis is a promising alternative to fossil fuels due to its high energy density with zero-carbon emissions.However,efficient and economic H_(2) production by alkaline water electrolysis is hindered by the sluggish hydrogen evolution reaction(HER)and oxygen evolution reaction(OER).Therefore,it is imperative to design and fabricate high-active and low-cost non-precious metal catalysts to improve the HER and OER performance,which affects the energy efficiency of alkaline water electrolysis.Ni_(3)S_(2) with the heazlewoodite structure is a potential electrocatalyst with near-metal conductivity due to the Ni–Ni metal network.Here,the review comprehensively presents the recent progress of Ni_(3)S_(2)-based electrocatalysts for alkaline water electrocatalysis.Herein,the HER and OER mechanisms,performance evaluation criteria,preparation methods,and strategies for performance improvement of Ni_(3)S_(2)-based electrocatalysts are discussed.The challenges and perspectives are also analyzed.

关键词： Alkaline water electrolysis Hydrogen Electrocatalysts Ni_(3)S_(2)

Development of advanced anion exchange membrane from the view of the performance of water electrolysis cell

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第3期90卷 348-369,I0009页

作者： Chao Liu Zhen Geng Xukang wang Wendong Liu yuwei wang Qihan Xia Wenbo Li Liming Jin Cunman Zhang Clean Energy Automotive Engineering Center Tongji UniversityShanghai 201804China School of Automotive Studies Tongji UniversityShanghai 201804China

Green hydrogen produced by water electrolysis combined with renewable energy is a promising alternative to fossil fuels due to its high energy density with zero-carbon emissions.Among water electrolysis technologies,the anion exchange membrane(AEM) water electrolysis has gained intensive attention and is considered as the next-generation emerging technology due to its potential advantages,such as the use of low-cost non-noble metal catalysts,the relatively mature stack assembly process,etc.However,the AEM water electrolyzer is still in the early development stage of the kW-level stack,which is mainly attributed to severe performance decay caused by the core component,i.e.,AEM.Here,the review comprehensively presents the recent progress of advanced AEM from the view of the performance of water electrolysis cells.Herein,fundamental principles and critical components of AEM water electrolyzers are introduced,and work conditions of AEM water electrolyzers and AEM performance improvement strategies are discussed.The challenges and perspectives are also analyzed.

关键词： Hydrogen Water electrolysis Anion exchange membrane Electrolysis cell

Progress in electrocatalytic nitrate reduction for green energy: Catalyst engineering, mechanisms, and techno-economic feasibility

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第8期95卷 380-406页

作者： Hafiz Muhammad Adeel Sharif Hafiz Muhammad Farooq Khan Sadeeq Ullah yuwei wang Muhammad Ahmad Bo Yang Changping Li Muhammad Bilal Asif Research Center for Eco-Environmental Engineering Dongguan University of Technology College of Chemistry and Engineering Shenzhen University FMH College of Medicine and Dentistry School of Environment and Civil Engineering Research Center for Eco-Environment Engineering Dongguan University of Technology Advanced Membranes and Porous Materials Center (AMPMC) Physical Sciences and Engineering (PSE) King Abdullah University of Science and Technology (KAUST)

Ammonia（NH3） is an irreplaceable chemical that has been widely demanded to keep the sustainable development of modern society.However,its industrial production consumes a huge amount of energy and releases extraordinary greenhouse gases（GHGs）,leading to various environmental issues.Achieving the green production of ammonia is a great challenge,which has been extensively pursued in the last decade.In this review,the most promising strategy,electrochemical nitrate reduction reaction（e-NO3RR）,is comprehensively investigated to give a complete understanding of its development and mechanism and provide guidance for future directions.However,owing to the complex reactions and limited selectivity,a comprehensive understanding of the mechanisms is crucial to further development and commercialization.Moreover,NO3-RR is a promising strategy for simultaneous water treatment and NH3production.A detailed overview of the recent progress in NO3-RR for NH3production with nontransition and transition metal based electrocatalysts is summarized.In addition,critical advanced techniques,future challenges,and prospects are discussed to guide future research on transition metal-based catalysts for commercial NH3synthesis by NO3-reduction.

关键词： Ammonia synthesis Electrolysis Green energy Nitrate reduction Pollution to solution Transition metal catalysts

Wearable and interactive multicolored photochromic fiber display

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Light(Science & Applications) 2024年第3期13卷 454-465页

作者： Pan Li yuwei wang Xiaoxian He Yuyang Cui Jingyu Ouyang Ju Ouyang Zicheng He Jiayu Hu Xiaojuan Liu Hang Wei Yu wang Xiaoling Lu Qian Ji Xinyuan Cai Li Liu Chong Hou Ning Zhou Shaowu Pan Xiangru wang Huamin Zhou Cheng-Wei Qiu Yan-Qing Lu Guangming Tao State Key Laboratory of Material Processing and Die&Mould Technology School of Materials Science and Engineering and Wuhan National Laboratory for OptoelectronicsHuazhong University of Science and TechnologyWuhan 430074China Key Laboratory of Vascular Aging(HUST) Ministry of EducationWuhan 430030China School of Optoelectronic Science and Engineering University of Electronic Science and Technology of ChinaChengdu 611731China Department of Electrical and Computer Engineering National University of SingaporeSingapore 117583Singapore National Laboratory of Solid State Microstructures Key Laboratory of Intelligent Optical Sensing and ManipulationCollege of Engineering and Applied Sciencesand Collaborative Innovation Center of Advanced MicrostructuresNanjing UniversityNanjing 210023China School of Performing Arts Wuhan Conservatory of MusicWuhan 430060China School of Mechanical Science and Engineering Huazhong University of Science and TechnologyWuhan 430074China School of Architecture and Urban Planning Huazhong University of Science and TechnologyWuhan 430074China School of Fashion Beijing Institute of Fashion TechnologyBeijing 100029China School of Optical and Electronic Information Huazhong University of Science and TechnologyWuhan 430074China Tongji Medical College Huazhong University of Science and TechnologyWuhan 430074China State Key Laboratory for Modification of Chemical Fibers and Polymer Materials College of Materials Science and EngineeringDonghua UniversityShanghai 201620China

Endowing flexible and adaptable fiber devices with light-emitting capabilities has the potential to revolutionize the current design philosophy of intelligent,wearable interactive devices.However,significant challenges remain in developing fiber devices when it comes to achieving uniform and customizable light effects while utilizing lightweight hardware.Here,we introduce a mass-produced,wearable,and interactive photochromic fiber that provides uniform multicolored light control.We designed independent waveguides inside the fiber to maintain total internal reflection of light as it traverses the fiber.The impact of excessive light leakage on the overall illuminance can be reduced by utilizing the saturable absorption effect of fluorescent materials to ensure light emission uniformity along the transmission direction.In addition,we coupled various fluorescent composite materials inside the fiber to achieve artificially controllable spectral radiation of multiple color systems in a single fiber.We prepared fibers on mass-produced kilometer-long using the thermal drawing method.The fibers can be directly integrated into daily wearable devices or clothing in various patterns and combined with other signal input components to control and display patterns as needed.This work provides a new perspective and inspiration to the existing field of fiber display interaction,paving the way for future human–machine integration.

关键词： fiber interactive colored

Photo-induced Ag modulating carbon dots:Greatly improved fluorescent properties and derived sensing application

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Chemical Letters 2024年第1期35卷 338-342页

作者： yuwei wang Ye Li Guixiang Yang Xiaofeng Yang Chenglu Yan Huaqiao Peng Huiyong wang Juan Du Baozhan Zheng Yong Guo Department of Chemistry Sichuan UniversityChengdu 610064China Institute of Quality Standard and Testing Technology for Agro-products Sichuan Academy of Agricultural SciencesChengdu 610066China Key Laboratory of Aviation Fuel&Chemical Airworthiness and Green Development The Second Research Institute of Civil Aviation Administration of ChinaChengdu 610041China School of Chemistry and Chemical Engineering Henan Normal UniversityXinxiang 453007China

Carbon dots(CDs)have been attracted much attention and widely studied due to their excellent fluorescence(FL)properties,better biocompatibility and outstanding photo/chemical stability.However,the disadvantage of lower quantum yield(QY)still limits its wide application.Herein,we reported a novel and convenient strategy to prepare photo-induced Ag/CDs(p-Ag/CDs)by irradiating the mixed Ag+and hydrophobic CDs(h-CDs)acetone solution with ultraviolet(UV)light.The obtained p-Ag/CDs exhibit a greatly enhanced FL emission together with a blue shift(460 nm)than h-CDs(520 nm).The QY of p-Ag/CDs is measured to be 51.1%,which is 10.4 times higher than that of h-CDs(4.9%),indicating that photo-induced Ag modulation can effectively improve the optical properties of CDs.The mechanisms for the FL enhancement and blue shift of h-CDs are studied in detail.The results prove that the greatly enhanced FL emission is from the generated Ag nanoparticles(AgNPs)by UV light irradiation based on metal-enhanced fluorescence(MEF),and the increased oxygen-contained groups in this process lead to the blue shift in CDs fluorescence.Interestingly,the p-Ag/CDs exhibit higher sensitivity and selectivity for sulfide ions(S2-)detection than that of h-CDs,which have a lower response to S2-.This work not only offers a novel strategy to improve the FL properties of materials but also endows them with new functions and broadens their application fields.

关键词： Carbon dots Photo-induced Ag modulating Fluorescent enhancement High quantum yield Derived sensing application Sulfide determination

Two-dimensional materials for future information technology: status and prospects

在线全文

学校读者我要写书评

暂无评论

Science China(Information Sciences) 2024年第6期67卷 1-147页

作者： Hao QIU Zhihao YU Tiange ZHAO Qi ZHANG Mingsheng XU Peifeng LI Taotao LI Wenzhong BAO Yang CHAI Shula CHEN Yiqi CHEN Hui-Ming CHENG Daoxin DAI Zengfeng DI Zhuo DONG Xidong DUAN Yuhan FENG Yu FU Jingshu GUO Pengwen GUO Yue HAO Jun HE Xiao HE Jingyi HU Weida HU Zehua HU Xinyue HUANG Ziyang HUANG Ali IMRAN Ziqiang KONG Jia LI Qian LI Weisheng LI Lei LIAO Bilu LIU Can LIU Chunsen LIU Guanyu LIU Kaihui LIU Liwei LIU Sheng LIU Yuan LIU Donglin LU Likuan MA Feng MIAO Zhenhua NI Jing NING Anlian PAN Tian-Ling REN Haowen SHU Litao SUN Yue SUN Quanyang TAO Zi-Ao TIAN Dong wang Hao wang Haomin wang Jialong wang Junyong wang Wenhui wang Xingjun wang Yeliang wang yuwei wang Zhenyu wang Yao WE Department of Applied Physics The Hong Kong Polytechnic University Key Laboratory for Micro-Nano Physics and Technology of Hunan Province College of Materials Science and EngineeringHunan University College of Integrated Circuits Zhejiang University Shenzhen Geim Graphene Center Shenzhen Key Laboratory of Layered Materials for Value-Added ApplicationsTsinghua-Berkeley Shenzhen Institute & Institute of Materials ResearchTsinghua Shenzhen International Graduate SchoolTsinghua University State Key Laboratory of Extreme Photonics and Instrumentation College of Optical Science and EngineeringInternational Research Center for Advanced PhotonicsZijingang CampusZhejiang University National Key Laboratory of Materials for Integrated Circuits Shanghai Institute of Microsystem and Information TechnologyChinese Academy of Sciences CAS Key Laboratory of Nanophotonic Materials and Devices & Key Laboratory of Nanodevices and Applications i-LabSuzhou Institute of Nano-Tech and Nano-Bionics (SINANO)Chinese Academy of Sciences College of Chemistry and Chemical Engineering Hunan University Key Laboratory of Quantum State Construction and Manipulation (Ministry of Education) Department of PhysicsRenmin University of China School of Integrated Circuits Beijing National Research Center for Information Science and Technology (BNRist)Tsinghua University School of Electronic Science and Engineering Nanjing University The State Key Discipline Laboratory of Wide Band Gap Semiconductor Technology Shaanxi Joint Key Laboratory of GrapheneSchool of MicroelectronicsXidian University Key Laboratory of Artificial Micro- and Nano-Structures of Ministry of Education School of Physics and TechnologyWuhan University School of Integrated Circuits Huazhong University of Science and Technology Center for Nanochemistry (CNC) Beijing Science and Engineering Center for NanocarbonsBeijing National Laboratory for Molecular SciencesCollege of Chemistry and Molecular EngineeringPeking University State Key Laboratory for Artificial Microstruct

Over the past 70 years, the semiconductor industry has undergone transformative changes,largely driven by the miniaturization of devices and the integration of innovative structures and materials. Two-dimensional(2D) materials like transition metal dichalcogenides(TMDs) and graphene are pivotal in overcoming the limitations of silicon-based technologies, offering innovative approaches in transistor design and functionality, enabling atomic-thin channel transistors and monolithic 3D integration. We review the important progress in the application of 2D materials in future information technology, focusing in particular on microelectronics and optoelectronics. We comprehensively summarize the key advancements across material production, characterization metrology, electronic devices, optoelectronic devices, and heterogeneous integration on silicon. A strategic roadmap and key challenges for the transition of 2D materials from basic research to industrial development are outlined. To facilitate such a transition, key technologies and tools dedicated to 2D materials must be developed to meet industrial standards, and the employment of AI in material growth, characterizations, and circuit design will be essential. It is time for academia to actively engage with industry to drive the next 10 years of 2D material research.

关键词： two-dimensional (2D) materials information technology production technology standardization of characterization microelectronicdevices optoelectronic devices multi-functional integration

Application of immersed boundary method in turbomachines

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of Aeronautics 2023年第5期36卷 268-279页

作者： Congcong CHEN yuwei wang Zhuo wang Lin DU Xiaofeng SUN School of Energy and Power Engineering Beihang UniversityBeijing 100191China Research Institute of Aero-Engine Beihang UniversityBeijing 100191China

Simulating unsteady turbulent flow in turbomachines is still challenging due to the complexity of blade geometry and relative motion between rotor and stator.This study presents an Immersed Boundary Method(IBM)for high-Reynolds turbomachinery internal flows,and shows the advantage of the automatic grid generation techniques and flexible moving boundary treatments.The wall functions are used in the present method to alleviate the wall resolution restriction of turbulence simulation.The Two-Dimensional(2-D)IBM solver,which was previously developed and tested for a low-speed compressor,is further validated for a well-documented Low-Pressure Turbine(LPT)cascade.Both the blade loading and the total pressure losses in the wake are well captured by the present 2-D solver.The complex Three-Dimensional(3-D)effects in turbomachines motivate the further development of an extended 3-D IBM solver by using a curvilinear-coordinate system that facilitates the hub and casing boundary treatment.The good performance of the 3-D solver is demonstrated through comparison with CFX solver solutions for the rotor configuration of Advanced Noise Control Fan(ANCF).Further effects of the grid resolution on capturing the blade wake are discussed.The results indicate that the present 3-D solver is capable of reproducing the evolution of the blade wake with suitable computational grid.

关键词： Immersed boundary method Turbomachinery Turbulence simulation Wake prediction Wall function

Atmospheric gaseous organic acids in winter in a rural site of the North China Plain

在线全文

学校读者我要写书评

暂无评论

Journal of Environmental Sciences 2022年第3期34卷 190-203页

作者： Xiaoyu Hu Gan Yang Yiliang Liu Yiqun Lu yuwei wang Hui Chen Jianmin Chen Lin wang Shanghai Key Laboratory of Atmospheric Particle Pollution and Prevention(LAP^(3)) Department of Environmental Science and EngineeringFudan UniversityShanghai 200438China IRDR International Center of Excellence on Risk Interconnectivity and Governance on Weather/Climate Extremes Impact and Public Health Fudan UniversityShanghai 200433China Collaborative Innovation Center of Climate Change Nanjing 210023China Shanghai Institute of Pollution Control and Ecological Security Shanghai 200092China

Organic acids are important contributors to the acidity of atmospheric precipitation,but their existence in the Chinese atmosphere is largely unclear.In this study,twelve atmospheric gaseous organic acids,including C_(1)-C_(9) alkanoic acids,methacrylic acid,pyruvic acid,and benzoic acid,were observed in the suburb of wangdu,Hebei Province,a typical rural site in the northern China plain from 16^(th) December,2018 to 22^(nd) January,2019,using a Vocus■ Proton-Transfer-Reaction time-of-flight mass spectrometer(Vocus PTR-ToF).The quantification of C_(2)-C_(4) alkanoic acids by the Vocus PTR-ToF was calibrated according to the titration of a NaOH solution by C_(2)-C_(4) alkanoic acids from home-made permeation sources,and the other organic acids except for formic acid were quantified based on the k_(cap)-sensitivity linearity in the Vocus PTR-ToF,whereas formic acid was not quantified because our instrument setting led to a significant underestimation in its concentration.The average total concentration of eleven gaseous organic acids was 6.96±5.20 ppbv(parts per billion by volume).The average concentration of acetic acid was the highest(3.86±3.00 ppbv),followed by propanoic acid,butyric acid,and methacrylic acid.Domestic straw burning was likely the dominant source of the observed gaseous organic acids according to the good correlations between acetonitrile and organic acids and between particulate K+and organic acids,and traffic emissions could also have contributed.During episodes with continuously high concentrations of organic acids,short-distance transport dominated in wangdu according to the backward trajectory analysis.Baoding,Shijiazhuang,and Hengshui areas were the main source areas based on potential source contribution function and concentration weighing track analysis.

关键词： Gaseous organic acids Vocus PTR-ToF North China plain

A Review of Methods Based on Nanofluids and Biomimetic Structures for the Optimization of Heat Transfer in Electronic Devices

在线全文

学校读者我要写书评

暂无评论

Fluid Dynamics & Materials Processing 2022年第5期18卷 1205-1227页

作者： Lanqi Chen yuwei wang Cong Qi Zhibo Tang Zhen Tian School of Low-Carbon Energy and Power Engineering China University of Mining and TechnologyXuzhou221116China

Nowadays,the utilization rate of electronic products is increasing while showing no obvious sign of reaching a limit.To solve the associated“internal heat generation problem”,scientists have proposed two methods or strategies.The first approach consists of replacing the heat exchange medium with a nanofluid.However,the high surface energy of the nanoparticles makes them prone to accumulate along the heat transfer surface.The second method follows a different approach.It tries to modify the surface structure of the electronic components in order to reduce the fluid-dynamic drag and improve the rate of heat exchange.This article reviews these effects considering different types of nanofluid and different shapes,sizes,and arrangements of“biomimetic grooves”.The idea to use these two methods in a combined fashion(to improve heat transfer and reduce flow resistance at the same time)is also developed and discussed critically to a certain extent.

关键词： Nanofluids biomimetic structure drag reduction characteristic thermal management