检索结果-南通市图书馆

Design and optimization of a greener sinomenine hydrochloride preparation process considering variations among different batches of the medicinal herb

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Chemical Engineering 2024年第7期71卷 77-90页

作者： Dandan Ren Jiale Xie Tianle Chen Haibin qu Xingchu Gong Pharmaceutical Informatics Institute College of Pharmaceutical SciencesZhejiang UniversityHangzhou 310058China National Key Laboratory of Chinese Medicine Modernization Zhejiang UniversityHangzhou 310058China Jinhua Institute of Zhejiang University Jinhua 321016China

The current methods used to industrially produce sinomenine hydrochloride involve several issues,including high solvent toxicity,long process flow,and low atomic utilization efficiency,and the greenness scores of the processes are below 65 *** solve these problems,a new process using anisole as the extractant was *** exhibits high selectivity for sinomenine and can be connected to the subsequent water-washing *** alkalization of the medicinal material,heating extraction,water washing,and acidification crystallization were carried *** process was modeled and *** design space was *** recommended operating ranges for the critical process parameters were 3.0–4.0 h for alkalization time,60.0–80.0℃ for extraction temperature,2.0–3.0(volume ratio)for washing solution amount,and 2.0–2.4 mol·L^(-1) for hydrochloric acid *** new process shows good robustness because different batches of medicinal materials did not greatly impact crystal purity or sinomenine transfer *** sinomenine transfer rate was about 20%higher than that of industrial *** greenness score increased to 90 points since the novel process proposed in this research solves the problems of long process flow,high solvent toxicity,and poor atomic economy,better aligning with the concept of green chemistry.

关键词： Sinomenine hydrochloride Process optimization Anisole

Electrode/Electrolyte Interfacial Chemistry Modulated by Chelating Effect for High-Performance Zinc Anode

在线全文

学校读者我要写书评

暂无评论

Energy & Environmental Materials 2024年第3期7卷 93-99页

作者： Chuanlin Li Guangmeng qu Xixi Zhang Chenggang Wang Xijin Xu School of Physics and Technology University of JinanJinan 250022China School of Chemistry and Chemical Engineering Shandong UniversityJinan 250100China

Although Zn metal has been regarded as the most promising anode for aqueous batteries,its practical application is still restricted by side reactions and dendrite ***,an in-situ solid electrolyte interphase(SEI)film formed on the interface of electrode/electrolyte during the plating/stripping of zinc anodes by introducing trace amounts of multidentate ligand sodium diethyldithiocarbamate(DDTC)additive into 1 M ZnSO_(4).The synergistic effect of in-situ solid electrolyte interphase forming and chelate effect endows Zn^(2+)with uniform and rapid interface-diffusion kinetics against dendrite growth and surface side *** a result,the Zn anode in 1 M ZnSO_(4)+DDTC electrolytes displays an ultra-high coulombic efficiency of 99.5%and cycling stability(more than 2000 h),especially at high current density(more than 600 cycles at 40 mA cm^(-2)).Moreover,the Zn//MnO_(2)full cells in the ZnSO_(4)+DDTC electrolyte exhibit outstanding cyclic stability(with 98.6%capacity retention after 2000 cycles at 10 C).This electrode/electrolyte interfacial chemistry modulated strategy provides new insight into enhancing zinc anode stability for high-performance aqueous zinc batteries.

关键词： chelating effect in-situ SEI ultra-high current density Zn anodes

Optimization on crystallization process of the magnetic core lysozyme

在线全文

学校读者我要写书评

暂无评论

Particuology 2024年第4期87卷 106-113页

作者： Lixia Hou Chunxiao qu Min Su Zhihan Liang Qi Hao School of Chemical Engineering Hebei University of TechnologyTianjin300130China

The continuous growth of the biomedical market highlights the significance of improvement in the ef-ficiency of batch production for protein drug ***,we investigated the effect of polymer-modified Fe_(3)O_(4) nanoparticles on lysozyme(Lys)crystallization at different conditions,using function-alized Fe_(3)O_(4) magnetic nanoparticles(Polymer C@Fe_(3)O_(4))as nucleation *** study revealed that the surface charge density of Polymer C@Fe_(3)O_(4) was highest at a modification mass ratio of Fe_(3)O_(4) to Polymer C is 8∶*** ratio facilitates the augmentation of electrostatic interaction and the promotion of *** adding 15%of the PolymerC@Fe_(3)O_(4) prepared from Fe_(3)O_(4) with an average particle size of 150 nm,the magnetic core lysozyme(M-Lys)crystals with an average particle size of 11.08μm,narrow size distribution,and regular morphology were obtained in a yield of 82.42%within 60 min.

关键词： Protein Crystallization Magnetic particle Lysozyme

Frequency-modulated continuous-wave multiplexed gas sensingbased on optical frequency comb calibration

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Physics B 2024年第9期33卷 152-163页

作者： Linhua Jia Xinghua qu Fumin Zhang State Key Laboratory of Precision Measurement Technology and Instruments Tianjin UniversityTianjin 300072China

Laser absorption spectroscopy has proven to be an effective approach for gas sensing, which plays an important rolein the fields of military, industry, medicine and basic research. This paper presents a multiplexed gas sensing system basedon optical frequency comb (OFC) calibrated frequency-modulated continuous-wave (FMCW) tuning nonlinearity. Thesystem can be used for multi-parameter synchronous measurement of gas absorption spectrum and multiplexed opticalpath. Multi-channel parallel detection is realized by combining wavelength division multiplexing (WDM) and frequencydivision multiplexing (FDM) techniques. By introducing nonlinear optical crystals, broadband spectrum detection is simultaneouslyachieved over a bandwidth of hundreds of nanometers. An OFC with ultra-high frequency stability is used asthe frequency calibration source, which guarantees the measurement accuracy. The test samples involve H13C14N, C_(2)H_(2)and Rb vapor cells of varying densities and 5 parallel measurement experiments are designed. The results show that themeasurement accuracies of spectral absorption line and the optical path are 150 MHz and 20 m, respectively. The schemeoffers the advantages of multiplexed, multi-parameter, wide spectrum and high resolution detection, which can realize theidentification of multi-gas components and the high-precision inversion of absorption lines under different *** proposed sensor demonstrates great potential in the field of high-resolution absorption spectrum measurement for gassensing applications.

关键词： frequency-modulated continuous-wave (FMCW) technology optical frequency comb multiplexing absorption spectroscopy

Enhanced degradation of refractory organics in ORR-EO system with a blue TiO_(2)nanotube array modified Ti-based Ni-Sb co-doped SnO_(2)anode

在线全文

学校读者我要写书评

暂无评论

Chinese Chemical Letters 2024年第8期35卷 391-395页

作者： Yifen He Chao qu Na Ren Dawei Liang Department of Materials Chemistry School of Materials Science&EngineeringBeihang UniversityBeijing 102206China Department of Environmental Science Faculty of Environment&LifeBeijing University of TechnologyBeijing 100124China

Recently,a novel 2-electron oxygen reduction reaction(ORR)based electro-oxidation(EO)system was developed,which utilizes a H_(2)O_(2)generation cathode instead of H_(2)evolution cathode.A Ti-based Ni-Sb co-doped SnO_(2)(Ti/NATO)anode was selected for efficient degradation of refractory organics and O_(3)*** synergistic reaction of O3/H_(2)O_(2)further accelerated the generation of hydroxyl radicals(·OH)in the ORR-EO ***,the catalytic activity and long-term effectiveness of the Ti/NATO anode limited the large-scale application of the ORR-EO *** this study,a blue TiO_(2)nanotube array(blue-TiO_(2)-NTA)inter-layer was introduced into the fabrication process between the Ti substrate and NATO catalyst *** to the Ti/NATO anode,the Ti/blue-TiO_(2)-NTA/NATO anode achieved higher efficiency of organic removal and O_(3)***,the accelerated lifetime of the Ti/blue-TiO_(2)-NTA/NATO anode was increased by 7 times compared to the Ti/NATO *** combined with CNTs-C/PTFE air cathode in ORR-EO system,all anodic oxidation and O_(3)/H_(2)O_(2)processes achieved higher•OH *** 92%of TOC in leachate bio-effluent was effectively eliminated with a relatively low energy cost of 45 kWh/t.

关键词： Electro-oxidation Blue TiO_(2)nanotube array O_(3)/H_(2)O_(2)process Refractory organics Leachate bio-effluent

Mobility of rhenium and selenium during chemical weathering and their implication for petrogenic organic carbon oxidation

在线全文

学校读者我要写书评

暂无评论

Science China Earth Sciences 2024年第3期67卷 740-750页

作者： Yuhong ZHANG Jin WANG Yuanxin qu Chao ZHU Zhangdong JIN State Key Laboratory of Loess and quaternary Geology Institute of Earth EnvironmentChinese Academy of SciencesXi'an 710061China University of Chinese Academy of Sciences Beijing 100049China Xi'an Institute for Innovative Earth Environment Research Xi'an 710061China Institute of Global Environmental Change Xi'an Jiaotong UniversityXi'an 710049China

The oxidative weathering of petrogenic organic carbon(OC_(petro)) is an important source of carbon dioxide(CO_(2)) into the atmosphere on geological timescales and significantly influences the carbon cycle and global climate change. However, at present, a robust proxy to assess OC_(petro)oxidation is lacking. Riverine rhenium(Re) has emerged as a potential proxy to trace OC_(petro)oxidation, but little is known about Re sources and its relationship with OC_(petro)oxidation. To better understand the robustness of this proxy, we analyzed a shale weathering profile from the early Cambrian Shuijingtuo Formation in Chengkou County, Chongqing City, to address the mobility of Re and selenium(Se) and their relationship with the oxidation of OC_(petro)by analyses of the elemental variation and sequential extraction. The results showed that the chemical index of alteration(CIA)increases from the fresh bedrock to the weathered sections, indicating enhanced weathering intensity. Based on the sequential extraction and mass transfer coefficients(τ), Re and Se mainly exist in the organic phase of shale and are paired lost with OC_(petro) during weathering, with no obvious correlation with sulfide minerals. Furthermore, the different proportions of Re and Se loss with OC_(petro) loss can be attributed to their different geochemical behaviors during weathering. Our study supports Re as a robust proxy to trace OC_(petro) oxidation, whereas Se is the potential one. In the future, combined studies on various sedimentary rock profiles with catchment basins are needed to determine the sources of riverine Re and Se and their relationships with OC_(petro) oxidation.

关键词： Rhenium and selenium Shale Mobility OC_(petro) Chemical weathering

Effects of Boron Addition on the Microstructure and Mechanical Properties ofγ′‑Strengthened Directionally Solidified CoNi‑Base Superalloy

在线全文

学校读者我要写书评

暂无评论

Acta Metallurgica Sinica(English Letters) 2024年第8期37卷 1438-1452页

作者： Shasha qu Yingju Li Bingyu Lu Cuiping Wang Yuansheng Yang Institute of Metal Research Chinese Academy of SciencesShenyang 110016China Guangdong Institute of Special Equipment Inspection and Research Foshan 528251China College of Materials and Fujian Provincial Key Laboratory of Materials Genome Xiamen UniversityXiamen 361005China

The effects of B addition on microstructure and mechanical properties of aγ′-strengthened CoNi-base superalloy are *** addition of B leads to a substantial increase in the volume fraction of both the eutectic structure and *** CoNi-base alloy shows a high solubility limit for the element *** become noticeable in the area surrounding the eutectic structure after the B level exceeds 0.46 at.%.It is found that the compression property and stress rupture life of the 4W2Ta alloys exhibit an initial rise followed by a subsequent drop as the B content gradually increases from 0.08 to 0.78 at.%.The 4W2Ta0.46B alloy demonstrates the most excellent high-temperature strength and stress rupture life,revealing that a moderate amount of B in the alloy noticeably enhances its mechanical properties by enhancing the grain boundary cohesion.

关键词： CoNi-base superalloy Borides Grain boundary Microstructure Mechanical properties

Comparison of life cycle assessment of large-scale biogas projects with different raw materials in China

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

International Journal of Agricultural and Biological Engineering 2024年第2期17卷 268-279页

作者： Jiazheng Sun Youpei qu Xiaoyi Lyu Xinjie Ding Xinying Miao Mukesh Kumar Awasthi Jingbo qu School of Energy and Environment City University of Hong KongHong Kong 999077China College of Engineering Northeast Agricultural UniversityHarbin 150030China Key Laboratory of Agricultural Renewable Resources Utilization Technology and Equipment in Cold Areas of Heilongjiang Province Harbin 150030China College of Natural Resources and Environment Northwest A&F UniversityYangling 712100Shaanxi China

The anaerobic digestion(AD)disposal of stover and cattle manure is of great significance to the development of low-carbon economy and green energy in China,but it will also have an impact on the environment,and the degree of influence is different for various raw *** this study,life cycle assessment(LCA)methods were applied to analyze and compare the impact of corn stovers biogas projects(CSBP)and dairy manure biogas projects(DMBP)on the environment during the whole operation *** results of inventory analysis were evaluated by ReCiPe2016 Hierarchy(H)mid-point(problem-oriented)and end-point(destruction-oriented)method,*** results showed that the net energy efficiency of CSBP was higher(763.903 kW·h/FU)and the greenhouse gas(GHG)emission reduction of DMBP was more(5541.418 kg CO_(2)-eq/FU).The anaerobic digestion(AD)units have the greatest environmental impacts,and human carcinogenic toxicity is the largest environmental impact category(1.16-1.43 PE).The key to reducing environmental impact is reducing the input of chemical substances and the waste of electric *** CSBP and DMBP have a favorable impact on ecosystem quality and resources,and CSBP is more beneficial to the environment(-10.297 Pt).Co-digestion is an important measure to reduce the environmental damage from biogas *** research results provide theoretical support for the selection of raw materials for large-scale biogas projects in China,provide technical basis for reducing the impact of actual operation on the environment,and promote the resource utilization of agricultural waste and carbon dioxide emission reduction and sequestration.

关键词： life cycle assessment environmental impact assessment large-scale biogas projects bioenergy carbon dioxide emission reduction

Earthquake potential across the North–South seismic belt of China

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Science Bulletin 2024年第2期69卷 179-182页

作者： Yanchuan Li Xinjian Shan Chunyan qu Guohong Zhang Xiaogang Song State Key Laboratory of Earthquake Dynamics Institute of GeologyChina Earthquake AdministrationBeijing 100029China

The elastic rebound theory,which frames our understanding of earthquakes,suggests that the accumulated elastic strain on faults will ultimately be released through earthquakes[1].As such,identifying the location,rate,and accumulation of slip deficit on faults constitutes a basis for seismic potential assessment[2].Interseismic coupling(ISC)refers to the ratio of the slip deficit rate on a fault to the far-field loading rate,where full and no coupling correspond to 100%and 0%slip deficits,respectively.

关键词： seismic belt fault