检索结果-南通市图书馆

Numerical study on local failures of reinforced concrete slabs against underwater close-in explosions

在线全文

学校读者我要写书评

暂无评论

Journal of Zhejiang University-Science A(Applied Physics & Engineering) 2024年第8期25卷 650-669页

作者： Fei zhou Hedong LI Hao WU College of Civil Engineering Tongji UniversityShanghai 200092China School of Civil Engineering and Architecture Zhejiang Sci-Tech UniversityHangzhou 310018China

Reinforced concrete(RC)slabs are the primary load-carrying member of underwater *** can suffer severe local failures such as cratering,spalling,or breaching as a result of underwater close-in(UWCI)*** this study,we established a fully validated high-fidelity finite element analysis approach to precisely reproduce the local failures of RC slabs after a UWCI explosion.A recently proposed dynamic constitutive model is used to describe wet *** effects of free water content on the material properties,including the tensile/compressive strength,elastic modulus,strain rate effect,failure strength surface,and equation of state,are comprehensively calibrated based on existing test *** calibrated material parameters are then verified by a single-element test.A high-fidelity finite element analysis(FEA)approach of an RC slab subjected to a UWCI explosion is established using an arbitrary Lagrangian-Eulerian(ALE)*** previous UWCI explosion tests on RC orifice targets and underwater contact explosion tests on saturated concrete slabs showed that the established FEA approach could accurately reproduce the pressure-time history in water and damage patterns,including the cracking,cratering,and spalling,of the RC orifice target and saturated concrete ***,parametric studies conducted by simulating an RC slab subjected to a UWCI explosion showed that:(i)the local failure of an RC slab enlarges with increased charge weight,reduced standoff distance,and reduced structural thickness;(ii)compared to a water-backed RC slab,an air-backed RC slab exhibits much more obvious local and structural ***,to aid the anti-explosion design of relevant underwater facilities,based on over 90 simulation cases empirical formulae are summarized to predict local failure modes,i.e.,no spall,spall,and breach,of water-and air-backed RC slabs subjected to a UWCI explosion.

关键词： Reinforced concrete slab(RC) Underwater close-in(UWCI)explosion Saturated concrete Failure modes Numerical simulation

Cybersecurity Landscape on Remote State Estimation:A Comprehensive Review

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

IEEE/CAA Journal of Automatica Sinica 2024年第4期11卷 851-865页

作者： Jing zhou Jun Shang Tongwen Chen the Department of Electrical and Computer Engineering University of AlbertaEdmonton AB T6G 1H9Canada the Department of Control Science and Engineering and Shanghai Research Institute for Intelligent Autonomous Systems Tongji UniversityShanghai 200092China

Cyber-physical systems(CPSs)have emerged as an essential area of research in the last decade,providing a new paradigm for the integration of computational and physical units in modern control *** state estimation(RSE)is an indispensable functional module of ***,it has been demonstrated that malicious agents can manipulate data packets transmitted through unreliable channels of RSE,leading to severe estimation performance *** paper aims to present an overview of recent advances in cyber-attacks and defensive countermeasures,with a specific focus on integrity attacks against ***,two representative frameworks for the synthesis of optimal deception attacks with various performance metrics and stealthiness constraints are discussed,which provide a deeper insight into the vulnerabilities of ***,a detailed review of typical attack detection and resilient estimation algorithms is included,illustrating the latest defensive measures safeguarding RSE from ***,some prevalent attacks impairing the confidentiality and data availability of RSE are examined from both attackers'and defenders'***,several challenges and open problems are presented to inspire further exploration and future research in this field.

关键词： Cyber-attacks Kalman filtering remote state estimation unreliable transmission channels

Physiological and psychological responses to tended plant communities with varying color characteristics

在线全文

学校读者我要写书评

暂无评论

Journal of Forestry Research 2024年第1期35卷 183-201页

作者： Siyuan Zheng Yanzhen zhou Haiyan Qu School of Architecture and Urban Planning Shenyang Jianzhu UniversityShenyang 110168People’s Republic of China

Exposure to plants has been reported to promote health and reduce stress,and plant color has direct impacts on physical and mental *** used images of common types of tended plant communities in Shenyang,China,with combinations of yellow,green,and red foliage,as experimental stimuli.A total of 27 images were used as visual *** used electroencephalography to measureαwave activity(8-13 Hz)in 40 subjects while they viewed visual *** data were combined with subjective questionnaire data to analyze the relaxing effect of images of tended plant communities with different color types and proportions on *** results revealed that,although there were slight differences between the electroencephalography and psychological findings,women were significantly more relaxed than men after viewing the *** and psychological responses varied with the types and proportions of colors in the tended plant communities:those of foliage with combinations of two or three colors induced stronger responses than images with a single ***,(1)for one-color plant communities,green or yellow plant communities induced a stronger relaxation effect than red plant communities;(2)for two-color plant communities,the optimal color proportion was 55%+45%,and the green+yellow and green+red color combinations induced a stronger relaxation effect;(3)for three-color plant communities,the relaxation effect was strongest when the color proportion was 55%green+25%yellow+20%*** data would provide a plant color matching in future plant landscape design,which may be helpful for creating healthy and relaxing environments.

关键词： Plant community Color type Color ratio Electroencephalography Subjective questionnaire

Adhesion Performances Between Two Orthotropic Solids Influenced by Temperature Increment

在线全文

学校读者我要写书评

暂无评论

Acta Mechanica Solida Sinica 2024年第3期37卷 430-443页

作者： Qing-Hui Luo Yue-Ting zhou School of Aerospace Engineering and Applied Mechanics Tongji UniversityShanghai200092China

The classical adhesive contact models belong to isothermal adhesion theories,where the effect of temperature on adhesion was ***,a number of experimental results indicated that the adhesion behaviors can be significantly affected by *** this paper,the two-dimensional non-slipping anisothermal adhesion behaviors between two orthotropic elastic cylinders are investigated within the framework of the Johnson-Kendall-Roberts *** stated problem is reduced to the coupled singular integral equations by virtue of the Fourier integral transform,which are solved analytically with the analytical function *** closed-form solutions for the stress fields in the presence of thermoelastic effect are *** stable equilibrium state of contact system is determined by virtue of the Griffith energy *** effect of temperature difference on adhesion behaviors between orthotropic solids is *** is found that the difference between the oscillatory and non-oscillatory solutions increases with increasing the degree of anisotropy of orthotropic *** oscillatory solution cannot be well approximated by the non-oscillatory solution for the orthotropic materials with relatively high anisotropy.

关键词： Adhesive contact Non-slipping JKR model Temperature Griffith energy balance

Combustion characteristics of millimeter-sized aluminum particles in fluidized bed under various O_(2)/CO_(2)/H_(2)O atmospheres Author links open overlay panel

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Particuology 2024年第8期91卷 315-322页

作者： Jialing zhou Rui Zhang Dong Liu Key Laboratory of Thermal Control of Electronic Equipment Ministry of Industry and Information TechnologyNanjing210094China Advanced Combustion Laboratory School of Energy and Power EngineeringNanjing University of Science and TechnologyNanjing210094China

Aluminum is an attractive alternative fuel,but it burns very inefficiently due to the formation of a dense Al_(2)O_(3)layer which prevents O_(2)from diffusion to the surface of Al *** previous experiments,the combustion of millimeter-sized Al(mAl)particles in the fluidized bed has achieved a substantial increase in the combustion efficiency,but further improvements are still *** this study,the effects of reaction atmosphere on the fluidized combustion of mAl particles were *** experiments with different O_(2)/H_(2)O/CO_(2)concentrations were *** experimental results indicate that the combustion efficiency of mAl particles in fluidized bed increases as the mole fraction of O_(2),H_(2)O or CO_(2)increases,and the highest combustion efficiency can reach 38.7%.After the analysis of the oxide film on the surface of aluminum particles,it was found that it is easier to generate the unstableθ-Al_(2)O_(3)under CO_(2)atmosphere,and it is easier to generate the unstableγ-Al_(2)O_(3)andθ-Al_(2)O_(3)under H_(2)O *** unstable Al_(2)O_(3)film is more likely to be abraded in the fluidized bed,which leads to the effective improvement of the combustion efficiency.

关键词： Al combustion Fluidized bed Atmosphere Combustion efficiency

Binary Hybrid Artificial Hummingbird with Flower Pollination Algorithm for Feature Selection in Parkinson’s Disease Diagnosis

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Bionic Engineering 2024年第2期21卷 1003-1021页

作者： Liuyan Feng Yongquan zhou Qifang Luo College of Artificial Intelligence Guangxi University for NationalitiesNanning530006China Xiangsihu College of Guangxi University for Nationalities Nanning532100GuangxiChina Guangxi Key Laboratories of Hybrid Computation and IC Design Analysis Nanning530006China

Parkinson’s disease is a neurodegenerative disorder that inflicts irreversible damage on *** experimental data regarding Parkinson’s patients are redundant and irrelevant,posing significant challenges for disease ***,there is a need to devise an effective method for the selective extraction of disease-specific information,ensuring both accuracy and the utilization of fewer *** this paper,a Binary Hybrid Artificial Hummingbird and Flower Pollination Algorithm(FPA),called BFAHA,is proposed to solve the problem of Parkinson’s disease diagnosis based on speech ***,combining FPA with Artificial Hummingbird Algorithm(AHA)can take advantage of the strong global exploration ability possessed by FPA to improve the disadvantages of AHA,such as premature convergence and easy falling into local ***,the Hemming distance is used to determine the difference between the other individuals in the population and the optimal individual after each iteration,if the difference is too significant,the cross-mutation strategy in the genetic algorithm(GA)is used to induce the population individuals to keep approaching the optimal individual in the random search process to speed up finding the optimal ***,an S-shaped function converts the improved algorithm into a binary version to suit the characteristics of the feature selection(FS)*** this paper,10 high-dimensional datasets from UCI and the ASU are used to test the performance of BFAHA and apply it to Parkinson’s disease *** with other state-of-the-art algorithms,BFAHA shows excellent competitiveness in both the test datasets and the classification problem,indicating that the algorithm proposed in this study has apparent advantages in the field of feature selection.

关键词： Artificial Hummingbird Algorithm Flower pollination algorithm Feature selection Parkinson’s disease Meta-heuristic

Implantable Electrochemical Microsensors for In Vivo Monitoring of Animal Physiological Information

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano-Micro Letters 2024年第3期16卷 183-211页

作者： Jin zhou Shenghan zhou Peidi Fan Xunjia Li Yibin Ying Jianfeng Ping Yuxiang Pan Laboratory of Agricultural Information Intelligent Sensing College of Biosystems Engineering and Food ScienceZhejiang UniversityHangzhou 310058People’s Republic of China ZJU-Hangzhou Global Scientific and Technological Innovation Center Zhejiang UniversityHangzhou 311200People’s Republic of China

In vivo monitoring of animal physiological information plays a crucial role in promptly alerting humans to potential diseases in animals and aiding in the exploration of mechanisms underlying human ***,implantable electrochemical microsensors have emerged as a prominent area of *** microsensors not only fulfill the technical requirements for monitoring animal physiological information but also offer an ideal platform for *** have been extensively studied for their ability to monitor animal physiological information in a minimally invasive manner,characterized by their bloodless,painless features,and exceptional *** development of implantable electrochemical microsensors for in vivo monitoring of animal physiological information has witnessed significant scientific and technological advancements through dedicated *** review commenced with a comprehensive discussion of the construction of microsensors,including the materials utilized and the methods employed for *** this,we proceeded to explore the various implantation technologies employed for electrochemical *** addition,a comprehensive overview was provided of the various applications of implantable electrochemical microsensors,specifically in the monitoring of diseases and the investigation of disease ***,a concise conclusion was conducted on the recent advancements and significant obstacles pertaining to the practical implementation of implantable electrochemical microsensors.

关键词： Electrochemical microsensors Implantable sensors In vivo monitoring Animal physiological information

Effect of internal structure of a batch-processing wet-etch reactor on fluid flow and heat transfer

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Chemical Engineering 2024年第8期72卷 177-186页

作者： Qinghang Deng Junqi Weng Lei zhou Guanghua Ye Xinggui zhou State Key Laboratory of Chemical Engineering School of Chemical EngineeringEast China University of Science and TechnologyShanghai 200237China

Batch-processing wet-etch reactors are the key equipment widely used in chip fabrication,and their performance is largely affected by the internal *** work develops a three-dimensional computational fluid dynamics(CFD)model considering heat generation of wet-etching reactions to investigate the fluid flow and heat transfer in the wet-etch *** backflow is observed below and above the wafer region,as the flow resistance in this region is *** temperature on the upper part of a wafer is higher due to the accumulation of reaction heat,and the average temperature of the side wafer is highest as its convective heat transfer is *** the gap between wafer and reactor wall can force the etchant to flow in the wafer region and then facilitate the convective heat transfer,leading to better within-wafer and wafer-to-wafer etch *** inlet angle of 60°balances fluid by-pass and mechanical energy loss,and it yields the best temperature and etch *** batch with 25wafers has much wider flow channels and much lower flow resistance compared with that with 50wafers,and thus it shows better temperature and etch *** results and the CFD model should serve to guide the optimal design of batch-processing wet-etch reactors.

关键词： Wet-etch reactor Batch-processing Computational fluid dynamics Reaction heat Internal structure Etch uniformity

Laser welding study of vacuum sintered HUST-1 lunar regolith simulant

在线全文

学校读者我要写书评

暂无评论

Science China(Technological Sciences) 2024年第9期67卷 2905-2918页

作者： HAN WenBin DING LieYun zhou Cheng zhou Yan DANG Fen National Center of Technology Innovation for Digital Construction Huazhong University of Science and TechnologyWuhan 430074China School of Civil and Hydraulic Engineering Huazhong University of Science and TechnologyWuhan 730074China

Efforts are underway to establish a permanent lunar base on the Moon. In situ lunar regolith is anticipated to be useful as a building material after sintering. However, sintering lunar regolith into a large-scale structure presents challenges. Therefore, the key to lunar construction lies in assembling multiple small-sized sintered modules into a stable, large-sized structure. This study explored the feasibility of welding the sintered HUST-1 lunar regolith simulant(HLRS) using a laser device and conducted experiments using lasers of varying power. The microstructure, mineral composition, element distribution, and shear strength of the welded joint were investigated. A few low-melting minerals were fused and vaporized during welding, leading to the generation of thermal decomposition gas. Furthermore, the welded joint exhibited numerous micro-cracks, pores, and bubbles,resulting in reduced weld shear strength. Finally, the influence of laser power on weld shear strength was investigated, revealing that the highest shear strength(15.69 N/cm) was achieved at a laser power of 1000 W. This study demonstrates the feasibility of laser welding of sintered HLRS for the first time, with potential applications in lunar base construction.

关键词： lunar regolith vacuum sintering laser welding weld shear strength lunar base