检索结果-南通市图书馆

Journal of Magnesium and Alloys 2024年第6期12卷 2312-2326页

作者： Kai Ma Jingfeng Wang Yinhong peng Chaoneng dai Yuanlang Pan Ye Wang Danqian Wang Jinxing Wang Yanlong Ma Fusheng Pan College of Materials Science and Engineering Chongqing UniversityChongqing 400044PR China National Engineering Research Center for Magnesium Alloys Chongqing 400044PR China College of Chemistry and Chemical Engineering Chongqing UniversityChongqing 401331PR China College of Materials Science and Engineering Chongqing University of TechnologyChongqing 400054PR China

In this study,Mg-13.2Gd-4.3Ni alloys containing continuous bulk-shaped long-period stacking ordered(LPSO),lamellar LPSO,and a small amount of eutectic phase were prepared,and the evolution of microstructure at different extrusion temperatures and its influence on mechanical and degradation properties as well as corrosion mechanism were *** before extrusion can effectively promote the precipitation of lamellar LPSO in ***400 with higher volume fraction of non-DRXed grains exhibited higher strength,which was mainly due to strong texture,high dislocation density,and high volume fraction of lamellar *** EX420 with higher volume fraction of DRXed grains showed higher degradation rate,which was mainly due to the higher density of grain *** EX400 exhibited excellent comprehensive properties with tensile yield strength(TYS)of 334 MPa,ultimate tensile strength(UTS)of 484 MPa and elongation(EL)of 7.4%,ultimate compressive strength(UCS)of 638 MPa and compressive yield strength(CYS)of 443 MPa,degradation rate of 86.1 mg/cm^(2)/h at 93℃in 3 wt.%KCl solution.

关键词： Mg-Gd-Ni alloys LPSO Mechanical properties Degradation rate

Towards an ultrafast 3D imaging scanning LiDAR system: a review

在线全文

学校读者我要写书评

暂无评论

Photonics Research 2024年第8期12卷 1709-1729页

作者： ZHI LI YAQI HAN LICAN WU ZIHAN ZANG MAOLIN dai SZE yun SET SHINJI YAMASHITA QIAN LI H.Y.FU Tsinghua Shenzhen International Graduate School Tsinghua University Department of Electrical Engineering and Information Systems The University of Tokyo Research Center for Advanced Science and Technology The University of Tokyo School of Electronic and Computer Engineering Peking University

Light detection and ranging (LiDAR), as a hot imaging technology in both industry and academia, has undergone rapid innovation and evolution. The current mainstream direction is towards system miniaturization and integration. There are many metrics that can be used to evaluate the performance of a LiDAR system, such as lateral resolution, ranging accuracy, stability, size, and price. Until recently, with the continuous enrichment of LiDAR application scenarios, the pursuit of imaging speed has attracted tremendous research interest. Particularly, for autonomous vehicles running on motorways or industrial automation applications, the imaging speed of LiDAR systems is a critical bottleneck. In this review, we will focus on discussing the upper speed limit of the LiDAR system. Based on the working mechanism, the limitation of optical parts on the maximum imaging speed is analyzed. The beam scanner has the greatest impact on imaging speed. We provide the working principle of current popular beam scanners used in LiDAR systems and summarize the main constraints on the scanning speed. Especially, we highlight the spectral scanning LiDAR as a new paradigm of ultrafast ***, to further improve the imaging speed, we then review the parallel detection methods, which include multiple-detector schemes and multiplexing technologies. Furthermore, we summarize the LiDAR systems with the fastest point acquisition rate reported nowadays. In the outlook, we address the current technical challenges for ultrafast LiDAR systems from different aspects and give a brief analysis of the feasibility of different approaches.

关键词： Frequency combs High speed imaging Optical access networks Remote sensing Single pixel imaging Spatial light modulators

Enhancing the Interaction of Carbon Nanotubes by Metal-Organic Decomposition with Improved Mechanical Strength and Ultra-Broadband EMI Shielding Performance

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Nano-Micro Letters 2024年第7期16卷 281-294页

作者： Yu-Ying Shi Si-Yuan Liao Qiao-Feng Wang Xin-yun Xu Xiao-yun Wang Xin-Yin Gu You-Gen Hu peng-Li Zhu Rong Sun Yan-Jun Wan Shenzhen Institute of Advanced Electronic Materials Shenzhen Institutes of Advanced TechnologyChinese Academy of SciencesShenzhen 518055People’s Republic of China Southern University of Science and Technology Shenzhen 518055People’s Republic of China National Key Laboratory of Materials for Integrated Circuits Shanghai Institute of Microsystem and Information TechnologyChinese Academy of SciencesShanghai 200050People’s Republic of China

The remarkable properties of carbon nanotubes(CNTs)have led to promising applications in the field of electromagnetic inter-ference(EMI)***,for macroscopic CNT assemblies,such as CNT film,achieving high electrical and mechanical properties remains challenging,which heavily depends on the tube-tube interac-tions of ***,we develop a novel strategy based on metal-organic decomposition(MOD)to fabricate a flexible silver-carbon nanotube(Ag-CNT)*** Ag particles are introduced in situ into the CNT film through annealing of MOD,leading to enhanced tube-tube *** a result,the electrical conductivity of Ag-CNT film is up to 6.82×10^(5) S m^(-1),and the EMI shielding effectiveness of Ag-CNT film with a thickness of~7.8μm exceeds 66 dB in the ultra-broad frequency range(3-40 GHz).The tensile strength and Young’s modulus of Ag-CNT film increase from 30.09±3.14 to 76.06±6.20 MPa(~253%)and from 1.12±0.33 to 8.90±0.97 GPa(~795%),***,the Ag-CNT film exhibits excellent near-field shield-ing performance,which can effectively block wireless *** innovative approach provides an effective route to further apply macroscopic CNT assemblies to future portable and wearable electronic devices.

关键词： EMI shielding Mechanical strength Carbon nanotubes Metal-organic decomposition Flexibility

Preparation of tungsten-particle-reinforced Zr-based bulk metallic glass composites by two-step spark plasma sintering:microstructure evolution,densification mechanism and mechanical properties

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2024年第4期43卷 1793-1808页

作者： yun-Fei Ma Pan Gong Mao Zhang Hui-EHu Zhen peng Xiao Xu Xin Wang Mehdi Malekan Xue-Feng Tang Lei Deng Jun-Song Jin Xin-yun Wang State Key Laboratory of Materials Processing and Die and Mould Technology School of Materials Science and EngineeringHuazhong University of Science and TechnologyWuhan430074China Research Institute of Huazhong University of Science and Technology in Shenzhen Shenzhen518057China Department of Chemistry and Materials Naval University of EngineeringWuhan430032China School of Materials Science and Engineering Jiangsu UniversityZhenjiang212013China College of Machine Shanghai Dianji UniversityShanghai201306China School of Metallurgy and Materials Engineering College of EngineeringUniversity of TehranTehran 11155-4563Iran

A new two-step spark plasma sintering(TSS)process with low-temperature pre-sintering and high-temperature final sintering has been successfully applied to prepare the tungsten-particle(Wp)-reinforced bulk metallic glass composites(Wp/BMGCs).Compared to normal spark plasma sintering(NS),the densification rate and relative density of Wp/BMGCs can be improved by selecting TSS with appropriate sintering pressure in the low temperature pre-sintering ***,the compressive strength and plastic strain of 30%Wp/BMGCs prepared by TSS are both higher than those of the samples prepared by *** TSS process can significantly enhance the compressive strength of 30%Wp/BMGCs by 12%and remarkably increase the plastic strain by 50%,while the trend is completely opposite for 50%Wp/***-in situ experiments and finite element simulations reveal that uneven temperature distribution among particles during low-temperature pre-sintering causes local overheating at contact points between particles,accelerating formation of sintering neck between particles and plastic deformation of *** the volume fraction of Wp is low,TSS can improve the interface bonding between particles by increasing the number of sintering *** makes the fracture mode of Wp/BMGCs being predominantly transgranular ***,as the volume fraction of Wp increases,the adverse effects of Wp plastic deformation are becoming more and more *** aggregated Wp tends to form a solid"cage structure"that hinders the bonding between particles at the interface;correspondingly,the fracture behavior of Wp/BMGCs is mainly dominated by intergranular ***,reducing the sintering pressure during the low-temperature pre-sintering stage of TSS has been shown to effectively decrease plastic deformation in Wp,resulting in a higher degree of densification and better mechanical properties.

关键词： Bulk metallic glass composites Tungsten particle Two-step spark plasma sintering Densification mechanism Mechanical properties

Spray pyrolysis feasibility of tungsten substitution for cobalt in nickel-rich cathode materials

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第10期31卷 2244-2252页

作者： Zihan Hou Lisheng Guo Xianlong Fu Hongxian Zheng Yuqing dai Zhixing Wang Hui Duan Mingxia Dong Wenjie peng Guochun Yan Jiexi Wang Key Laboratory of Value-added Metallurgy of Hunan Province Engineering Research Center of the Ministry of Education for Advanced Battery MaterialsSchool of Metallurgy and EnvironmentCentral South UniversityChangsha 410083China BASF Shanshan Battery Materials Co.Ltd. Changsha 410205China

Cobalt(Co)serves as a stabilizer in the lattice structure of high-capacity nickel(Ni)-rich cathode ***,its high cost and toxicity still limit its *** general,it is possible to perform transition metal substitution to reduce the Co ***,the traditional coprecipitation method cannot satisfy the requirements of multielement coprecipitation and uniform distribution of elements due to the differences between element concentration and deposition *** this work,spray pyrolysis was used to prepare LiNi_(0.9)Co_(0.1-x)W_(x)O_(2)(LNCW).In this regard,the pyrolysis behavior of ammonium metatungstate was analyzed,together with the substitu-tion of W for *** the possibility of spray pyrolysis,the Ni-Co-W-containing oxide precursor presents a homogeneous distribution of metal elements,which is beneficial for the uniform substitution of W in the final *** was observed that with W substitution,the size of primary particles decreased from 338.06 to 71.76 nm,and cation disordering was as low as 3.34%.As a consequence,the pre-pared LNCW exhibited significantly improved electrochemical *** optimal conditions,the lithium-ion battery assembled with LiNi_(0.9)Co_(0.0925)W_(0.0075)O_(2)(LNCW-0.75mol%)had an improved capacity retention of 82.7%after 200 cycles,which provides insight in-to the development of Ni-rich low-Co *** work presents that W can compensate for the loss caused by Co deficiency to a cer-tain extent.

关键词： lithium-ion batteries Ni-rich low-cobalt W substitution spray pyrolysis

Stabilizing zinc anode using zeolite imidazole framework functionalized separator for durable aqueous zinc-ion batteries

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第3期90卷 23-31,I0003页

作者： Weisong Zhang Xinyan Zhu Ling Kang Ziyu peng Jing Zhu Liang Pan Lei dai Shude Liu Ling Wang Yongguang Liu Zhangxing He School of Chemical Engineering North China University of Science and TechnologyTangshan 063009HebeiChina Shanghai Key Laboratory of Multidimensional Information Processing East China Normal UniversityShanghai 201620China College of Textiles Donghua UniversityShanghai 201620China

Aqueous zinc-ion batteries(AZIBs) hold great promise as a viable alternative to lithium-ion batteries owing to their high energy density and environmental ***,AZIBs are consistently plagued by the formation of zinc dendrites and concurrent side reactions,which significantly diminish their overall service life,In this study,the glass fiber separator(GF) is modified using zeolite imidazole salt framework-8(ZIF-8),enabling the development of efficient ***-8,which is abundant in nitrogen content,efficiently regulates the desolvation of [Zn(H_(2)O)_(6)]^(2+) to inhibit hydrogen ***,it possesses abundant nanochannels that facilitate the uniform deposition of Zn~(2+) via a localized action,thereby hindering the formation of *** insulating properties of ZIF-8 help prevent Zn^(2+) and water from trapping electron reduction at the layer surface,which reduces corrosion of the zinc ***,ZIF-8-GF achieves the even transport of Zn^(2+) and regulates the homogeneous deposition along the Zn(002) crystal surface,thus significantly enhancing the electrochemical performance of the AZIBs,In particular,the Zn|Zn symmetric cell with the ZIF-8-GF separator delivers a stable cycle life at0.5 mA cm^(-2) of 2300 *** Zn|ZIF-8-GF|MnO_(2) cell exhibits reduced voltage polarization while maintaining a capacity retention rate(93.4%) after 1200 cycles at 1.2 A g^(-1) The unique design of the modified diaphragm provides a new approach to realizing high-performance AZIBs.

关键词： Aqueous zinc-ion batteries Separators modifications ZIF-8 Zn deposition Dendrite-free

Chinese expert consensus on the clinical application of drugcoated balloon(2^(nd) Edition)

在线全文

学校读者我要写书评

暂无评论

Journal of Geriatric Cardiology 2024年第2期21卷 135-152页

作者： The Expert Writing Committee of the Chinese Expert Consensus on Clinical Applications of Drug-Coated Balloon(2^(nd)Edition) Jun-Bo GE yun-dai CHEN 不详 Zhongshan Hospital Fudan University Chinese PLA General Hospital

Percutaneous coronary interventions have progressed through the era of plain balloon dilation, bare-metal stent insertion to drug-eluting stent treatment, which has significantly reduced the acute occlusion and restenosis rates of target vessels and improved patient prognosis, making drug-eluting stents the mainstream interventional treatment for coronary artery disease. In recent years, drug-coated balloons(DCBs) have become a new treatment strategy for coronary artery disease, and the drugs used in the coating and the coating technology have progressed in the past years. Without permanent implant, a DCB delivers antiproliferative drugs rapidly and uniformly into the vessel wall via the excipient during a single balloon dilation. Many evidence suggests that DCB angioplasty is an effective measure for dealing with in-stent restenosis and de novo lesions in small coronary *** more clinical studies are published, new evidence is emerging for the use of DCB angioplasty in a wide range of coronary diseases, and the indications are expanding internationally. Based on the latest research from China and elsewhere, the Expert Writing Committee of the Chinese Expert Consensus on Clinical Applications of Drug-Coated Balloon has updated the previous DCB consensus after evidence-based discussions and meetings in terms of adequate preparation of in-stent restenosis lesions, expansion of the indications for coronary de novo lesions, and precise guidance of DCB treatment by intravascular imaging and functional evaluation.

关键词： balloon drugs dealing

Promotion effect of epoxy group neighboring single-atom Cu site on acetylene hydrochlorination

在线全文

学校读者我要写书评

暂无评论

Chinese Chemical Letters 2024年第6期35卷 258-262页

作者： Junchen peng Xue Yin Dandan Dong Zhongyuan Guo Qinqin Wang Minmin Liu Fei He Bin dai Chaofeng Huang School of Chemistry and Chemical Engineering/State Key Laboratory Incubation Base for Green Processing of Chemical Engineering Shihezi UniversityShihezi 832000China College of Chemistry&Chemical Engineering Yantai UniversityYantai 264010China School of Material Science and Engineering University of JinanJi’nan 250022China

Carbon materials have been used as the support for catalysts in the field of acetylene hydrochlorination,the influence of inevitable oxygen-containing moieties on the reaction is often ignored and the mechanism of the oxygen-doping structure remains ***,we explored the effect of the oxygen-containing group(C-O-C)in the support on the activity of single-atom dispersed Cu *** immersing the Cu single-atom catalyst in an alkaline solution,the epoxy species on the carbon support was cleaved to obtain a pure ether species while the Cu site was modified to a more electron-deficient *** turnover frequency value of Cu/O-FLP catalyst with epoxy groups was 1.6-fold higher than that of alkaline treated *** result indicated that the epoxy groups could assist adjacent single-atom Cu sites to synergistically promote the adsorption and cleavage of the reactant hydrogen chloride toward form C-OH and Cu-Cl bonds,and reduce the reaction energy *** presence of electron deficient Cu sites and ether species could induce competitive adsorption of the acetylene and hydrogen chloride,thereby reducing the activity of the *** study highlights the influence of surface oxygen species and the tunability of the support,providing the foundation for the fabrication of higher-activity Cu catalysts for acetylene hydrochlorination.

关键词： Epoxy group Acetylene hydrochlorination Single-atom Cu catalyst Synergistic dissociation

NiO@Ni nanoparticles embedded in N-doped carbon for efficient photothermal CO_(2) methanation coupled with H_(2)O splitting

在线全文

学校读者我要写书评

暂无评论

Nano Research 2024年第4期17卷 2283-2290页

作者： yun Zhou peng Zheng Fang Wang Fangna Gu Wenqing Xu Qinyang Lu Tingyu Zhu Ziyi Zhong Guangwen Xu Fabing Su Institute of Process Engineering Chinese Academy of SciencesBeijing 100190China Key Laboratory on Resources Chemicals and Materials of Ministry of Education Shenyang University of Chemical TechnologyShenyang 110142China Institute of Industrial Chemistry and Energy Technology Shenyang University of Chemical TechnologyShenyang 110142China School of Ecology and Environment Beijing Technology and Business UniversityBeijing 100048China Beijing Key Laboratory of Enze Biomass Fine Chemicals College of New Materials and Chemical EngineeringBeijing Institute of Petrochemical TechnologyBeijing 102617China International School of Beijing 10 An Hua Street Shunyi DistrictBeijing 100048China Department of Chemical Engineering Guangdong Technion Israel Institute of Technology(GTIIT)Shantou 515063China Technion Israel Institute of Technology(IIT) Haifa32000Israel

Photothermal carbon dioxide(CO_(2))methanation has attracted increasing interest in solar fuel synthesis,which employs the advantages of photocatalytic H_(2)O splitting as a hydrogen source and photothermal catalytic CO_(2) *** work prepared three-dimensional(3D)honeycomb N-doped carbon(NC)loaded with core–shell NiO@Ni nanoparticles generated in situ at 500℃(NiO@Ni/NC-500).Under the photothermal catalysis(200℃,1.5 W/cm^(2)),the CH_(4) evolution rate of NiO@Ni/NC-500 reached 5.5 mmol/(g·h),which is much higher than that of the photocatalysis(0.8 mmol/(g·h))and the thermal catalysis(3.7 mmol/(g·h)).It is found that the generated localized surface plasmon resonance enhances the injection of hot electrons from Ni to NiO,while thermal heating accelerates the thermal motion of radicals,thus generating a strong photo-thermal synergistic effect on the *** CO_(2) reduction to CH_(4) follows the*OCH *** work demonstrates the synergistic effect of NiO@Ni and NC can enhance the catalytic performance of photothermal CO_(2) reduction reaction coupled with water splitting reaction.

关键词： Ni localized surface plasmon resonance photothermal methanation

Impact of Annealing on the Melt Recrystallization of a-PDLA/α-PLLA Double-layered Films

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of Polymer Science 2024年第2期42卷 230-238,I0009页

作者： yun-peng Li Hao-Ran Shen Shao-Juan Wang Hao Zhang Jian Hu Rui Xin Xiao-Li Sun Shou-Ke Yan Key Laboratory of Rubber-Plastics Ministry of Education/Shandong Provincial Key Laboratory of Rubber-plasticsQingdao University of Science&TechnologyQingdao266042China State Key Laboratory of Chemical Resource Engineering Beijing University of Chemical TechnologyBeijing100029China

Poly(lactic acid)(PLA) as a bio-based polymer with biodegradability and biocompatibility has attracted much attention. To manipulate its properties for different applications, regulation of crystal structure and crystalline morphology becomes an attractive research topic. In this work, the structure evolution of layered samples containing an amorphous poly(D-lactide)(PDLA) layer and a crystalline poly(L-lactide)(PLLA)layer with highly oriented edge-on α lamellar crystals after annealing at 150 ℃ or/and after melt-recrystallization has been studied by AFM, FTIR,and TEM combined with electron diffraction. The results demonstrate that melt recrystallization of the as-prepared sample leads to the formation of abundant randomly oriented PLA stereo-complex(PLA SC) crystals. Annealing at 150 ℃ results in the formation of a small amount of oriented PLA SC crystals at the interface. These PLA SC crystals show great impact on the recrystallization behavior of sample after melting at 190 ℃ and then crystallizing at 90 ℃. First, they impede the mutual diffusion of the overlying PDLA and underlying PLLA, and thus reduce their stereocomplexation ability as manifested by the decreased amount of PLA SC crystals. Second, they act as substrate to initiate the epitaxial crystallization of the overlying PDLA and underlying PLLA, which ensures the production of a highly oriented structure of PDLA and PLLA after melt recrystallization again.

关键词： Poly(L-lactide) Poly(D-lactide) Double layer Stereocomplex