检索结果-南通市图书馆

IEEE/CAA Journal of Automatica Sinica 2025年第1期 99-113页

作者： Kamal Rsetam Zhenwei cao Zhihong Man Xian-Ming Zhang the School of Software and Electrical Engineering Swinburne University of Technology the Department of Automated Manufacturing Al Khwarizmi College of Engineering University of Baghdad IEEE

To handle input and output time delays that commonly exist in many networked control systems(NCSs), a new robust continuous sliding mode control(CSMC) scheme is proposed for the output tracking in uncertain single input-single-output(SISO) networked control systems. This scheme consists of three consecutive steps. First, although the network-induced delay in those systems can be effectively handled by using Pade approximation(PA), the unmatched disturbance cames out as another difficulty in the control design. Second, to actively estimate this unmatched disturbance, a generalized proportional integral observer(GPIO) technique is utilized based on only one measured state. Third, by constructing a new sliding manifold with the aid of the estimated unmatched disturbance and states, a GPIO-based CSMC is synthesized, which is employed to cope with not only matched and unmatched disturbances, but also networkinduced delays. The stability of the entire closed-loop system under the proposed GPIO-based CSMC is detailedly *** promising tracking efficiency and feasibility of the proposed control methodology are verified through simulations and experiments on Quanser's servo module for motion control under various test conditions.

关键词：

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

职业教育发展对实体经济的影响研究

黑龙江高教研究 2025年第1期43卷 147-154页

作者：刘聪阮晓文曹辉南京工业职业技术大学江苏南京210023 江苏大学江苏镇江212013

基于2005一2021年的省际面板数据,采用双向固定效应模型,实证分析了职业教育发展对实体经济的影响效应和作用机制。研究发现,职业教育发展会显著促进实体经济增长,且该结论在替换变量和工具变量估计的稳健性检验下依然成立;异质性分析表... 详细信息

基于2005一2021年的省际面板数据,采用双向固定效应模型,实证分析了职业教育发展对实体经济的影响效应和作用机制。研究发现,职业教育发展会显著促进实体经济增长,且该结论在替换变量和工具变量估计的稳健性检验下依然成立;异质性分析表明,职业教育发展对经济发展程度和教育发展水平欠发达地区的实体经济促进效应更大;机制验证表明,职业教育发展会通过培育匠心劳动者、提高新质生产力和繁荣创业活跃度促进实体经济增长。未来,为更好建设以实体经济为支撑的现代化产业体系,应加快推进中国式职业教育现代化建设,并注重发展策略的精准性。

关键词：职业教育实体经济新质生产力

中国式现代化对西方中心主义文明观的破题与超越

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

保山学院学报 2025年第1期44卷 22-28页

作者：曹鏸中国农业大学马克思主义学院北京100083

从文明观的视角出发,中国式现代化代表着具有悠久历史传统的中华文明与马克思主义相结合,以全新形态进入当代人类文明体系中。中国式现代化从话语解构和范式升维两路径实现了西方中心主义文明观的现实批判,在复原现代化本真含义、打破... 详细信息

从文明观的视角出发,中国式现代化代表着具有悠久历史传统的中华文明与马克思主义相结合,以全新形态进入当代人类文明体系中。中国式现代化从话语解构和范式升维两路径实现了西方中心主义文明观的现实批判,在复原现代化本真含义、打破消费主义幻境、回击话语启示陷阱三方面破解了西方中心主义文明观的现代化迷障,实现对资本逻辑和西方现代化模板的话语解构,并在“自我-他者-世界”三重向度上构成了对西方中心主义文明观发展范式、合作范式、文明范式的超越升华。

关键词：中国式现代化西方中心主义文明观现代化

Removal of Cd^(2+) from water by Friedel's salt (FS:3cao·A1_2O_3 ·CaCl_2 ·10H_2O): Sorption characteristics and mechanisms

在线全文

学校读者我要写书评

暂无评论

Journal of Environmental Sciences 2013年第9期25卷 1719-1725页

作者： Juanjuan Zhang He Zhao Hongbin cao Heping Li Zhibao Li Key Laboratory of Green Process and Engineering Institute of Process Engineering Chinese Academy of Sciences College of Chemical and Biologic Engineering Changsha University of Science and Technology National Engineering Laboratory for Hydrometallurgical Cleaner Production Technology

The development of low-cost and efficient new mineral adsorbents has been a hot topic in recent years. In this study, Friedel＇s salt （FS：3cao·A12O3 ·CaCl2 ·10H2O）, a hexagonal layered inorganic absorbent, was synthesized to remove Cd2＋ from water. The adsorption process was simulated by Langmuir and Freundlich models. The adsorption mechanism was further analyzed with TEM, XRD, FT-IR analysis and monitoring of metal cations released and solution pH variation. The results indicated the adsorbent FS had an outstanding ability for Cd（Ⅱ） adsorption. The maximum adsorption capacity of the FS for Cd（Ⅱ） removal can reach up to 671.14 mg/g. The nearly equal numbers of Cd2＋ adsorbed and Ca2＋ released demonstrated that ion-exchange （both surface and inner） of the FS for Cd（Ⅱ） played an important role during the adsorption process. Furthermore, the surface of the FS after adsorption was microscopically disintegrated while the inner lamellar structure was almost unchanged. The behavior of Cd（Ⅱ） adsorption by FS was significantly affected by surface reactions. The mechanisms of Cd2＋ adsorption by the FS mainly included surface complexation and surface precipitation. In the present study, the adsorption process was fitted better by the Langmuir isotherm model （R2 = 0.9999） than the Freundlich isotherm model （R2 = 0.8122）. Finally, due to the high capacity for ion-exchange on the FS surface, FS is a promising layered inorganic adsorbent for the removal of Cd（Ⅱ） from water.

关键词： Friedel’s salt cadmium adsorption isotherm mechanism

Melting Evaluation of Phase Change Materials Impregnated into Cascaded Metal Foams with Regionalized Enhancement

在线全文

学校读者我要写书评

暂无评论

Journal of Thermal Science 2025年第1期 223-241页

作者： WEI Xinyi ZHANG Nan ZHANG Zhaoli cao Xiaoling YUAN Yanping School of Mechanical Engineering Southwest Jiaotong University

Metal foam promotes the heat transfer of phase change materials(PCMs) in the penalty of reducing the energy storage density of the composite *** this work,the effects of constant porosity(0.96,0.94,0.92,or 0.90) and pore density(PPI) of metal foam on heat transfer of composite PCMs are *** rate could be enhanced by employing with low porosity copper ***,aiming to the right bottom phase changing "dead region",a regionalized enhancement strategy of cascaded metal foams is *** dynamic melting performances of all the composite PCMs are comprehensively *** results reveal that the cascaded configuration is beneficial for *** show that the horizontal strategy enhances melting performance:a maximum of 17.98% reduction in total melting time could be reached when the rear part porosity is 90%.The energy storage density rate could be raised by 5.48%.Besides,the vertical strategy performs with a better average temperature uniformity of 0.441 and brings a lower temperature in the heated *** sum up,the regionalized enhancement of copper foam provides better performance in the phase change *** shows significant potential for solar heat storage and thermal protection.

关键词：

Si-C Foam Porous-Medium Combustion Power-Generation System for Low-Calorific-Value Biomass Syngas

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Thermal Science 2025年第1期 206-222页

作者： YANG Jianwen CHEN Wei cao Bingwei LIU Xinhui LI Hang College of Mechanical and Aerospace Engineering Jilin University School of Mechanical and Vehicle Engineering Changchun University

Syngas produced from the gasification of organic feedstocks from biomass is one of the clean and sustainable sources of *** advantages of simple access and renewability of biomass energy can meet the energy needs of temporary power *** study presents a biomass power-generation system for vehicular *** biomass and a free-piston Stirling engine generator（FPSEG） as the primary material and prime mover,respectively,biomass energy is converted into electricity by combusting the syngas to heat the *** and key parameter design for biomass gasification and thermoelectric conversion systems within a power generation system were performed.A porous medium area was constructed using Si-C foam ceramics to obtain an energy-conversion experimental *** effects of bed height,porosity,porous-region diameter,and air-intake conditions on the power-generation performance were investigated,and optimisations were performed for the thermoelectric conversion *** rate of increase during FPSEG power generation first increased and then decreased with increasing bed height,peaking at a bed height of 40 *** increasing porous-region diameter accelerated FPSEG power generation,whereas porosity changes in the porous media did not significantly affect the rate of change during FPSEG power *** increasing air intake,the rate of increase during power generation first increased and then *** maximum change rate and the highest thermoelectric conversion efficiency of the power-generation system occurred at 9.5 m3/h and 6.5 m3/h（～45.1%）air intakes,*** the thermal inertia and combustion structure of the thermoelectric conversion system significantly increased the power-generation rate of the system,with 1.8 W/s being observed at a 9.7 m3/h air intake.

关键词：

Zeros of Complete Symmetric Polynomials over Finite Fields

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Systems Science & Complexity 2024年第4期37卷 1772-1788页

作者： cao Wei School of Mathematics and Statistics Minnan Normal UniversityZhangzhou 363000China

Wan and Zhang(2021) obtained a nontrivial lower bound for the number of zeros of complete symmetric polynomials over finite fields,and proposed a problem whether their bound can be *** this paper,the author improves Wan-Zhang's bound from three *** proposed results are based on the estimates related to the number of certain permutations and the value sets of non-permutation polynomials associated to the complete symmetric *** the author believes that there are still possibilities to improve the bounds and hence Wan-Zhang's bound.

关键词： Complete symmetric polynomial finite field permutation polynomial value set

Carbon nanotube transistor technology for More-Moore scaling

在线全文

学校读者我要写书评

暂无评论

Nano Research 2021年第9期14卷 3051-3069页

作者： Qing cao Department of Materials Science and Engineering Department of Electrical and Computer EngineeringDepartment of Chemistry Seitz Materials Research LaboratoryUniversity of Illinois at Urbana-ChampaignUrbanaIL 61820USA

Scaling of silicon field-effect transistors has fueled the exponential development of microelectronics in the past 60 years,but is now close to its physical limits with the critical dimensions of state-of-the-art silicon devices approaching the sub-10 nm *** nanotubes have been suggested to hold great promise of replacing the central role of silicon in the next-generation logic switches with their unique geometrical and electrical *** this article,I firstly examine the scaling advantages of carbon nanotubes compared to silicon from technology-development perspective,and then review the latest progress on addressing the manufacturability issues for scaled carbon-nanotube transistors,from materials to device-integration ***,the possible pathways for nanotube transistors to transition into commercial applications are discussed.

关键词： carbon nanotube transistor scaling

Orbitronics for energy-efficient magnetization switching

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Science China(Information Sciences) 2025年第1期 398-399页

作者： Yuxuan YAO Daoqian ZHU Qingtao XIA Jianing LIANG Yuhao JIANG Zhiyang PENG Jiaxu LI Chen XIAO Renyou XU Wenwen WANG Xiantao SHANG Shiyang LU Dapeng ZHU Hong-Xi LIU Kaihua cao Weisheng ZHAO Fert Beijing Institute School of Integrated Circuit Science and Engineering Beihang University National Key Lab of Spintronics Institute of International Innovation Beihang University Qingdao Research Institute Beihang University Truth Memory Corporation

Spin-orbit torque （SOT）,as a promising writing method for magnetic random-access memory （MRAM）,has garnered widespread interest for over a decade [1].Heavy metals,such as β-W,have been broadly adopted as spin current sources,but suffer from phase change at a limited thickness,resulting in a dramatic reduction of the charge-tospin conversion efficiency θSH[2].The thickness limitation leads to stringent etching conditions and large distribution among devices,posing challenges for simultaneously satisfying SOT efficiency,etching-stop margins,and back-end-ofline （BEOL） compatibility.

关键词：

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

大跨度钢混组合梁斜拉桥钢锚梁制造关键技术

山西建筑 2025年第2期51卷 183-186页

作者：曹军文陕西西安710000

结合公司近几年生产制造的大跨度钢混组合梁斜拉桥钢锚梁结构,以禹门口黄河大桥为例,介绍了钢锚梁结构组成,分析了大跨度钢混组合梁斜拉桥钢锚梁制造重难点,针对该项目钢锚梁结构复杂、熔透焊缝多的特点,论述了大跨度钢混组合梁斜拉桥... 详细信息

结合公司近几年生产制造的大跨度钢混组合梁斜拉桥钢锚梁结构,以禹门口黄河大桥为例,介绍了钢锚梁结构组成,分析了大跨度钢混组合梁斜拉桥钢锚梁制造重难点,针对该项目钢锚梁结构复杂、熔透焊缝多的特点,论述了大跨度钢混组合梁斜拉桥钢锚梁的制造关键技术,解决了加工制造过程中焊接变形及尺寸精度控制等诸多技术难题。

关键词：钢混组合梁斜拉桥钢锚梁制造关键技术