检索结果-南通市图书馆

Dissolution kinetics and reaction mechanism of Al_(2)O_(3) in molten CaF_(2)-CaO-Al_(2)O_(3) slag

Journal of Iron and Steel Research(International) 2024年第4期31卷 861-869页

作者： Yao-xin Du Yan-wu Dong Zhou-hua Jiang Ganna Stovpchenko yu-shuo li Jun Huang Xin-wei Wang yu-xiao liu School of Metallurgy Northeastern UniversityShenyang 110819LiaoningChina Key Laboratory of Ecological Metallurgy of Multimetallic Mineral Northeastern UniversityShenyang 110819LiaoningChina State Key Laboratory of Rolling and Automation Northeastern UniversityShenyang 110819LiaoningChina E.O.Paton Electric Welding Institute of the National Academy of Science of Ukraine Kiev 03115Ukraine

The dissolution behavior of Al_(2)O_(3) in molten CaF_(2)-CaO-Al_(2)O_(3) slag,a basic slag system of electroslag remelting process,was investigated by rotating cylinder method using corundum rods to simulate Al_(2)O_(3) inclusions in *** experimental results show that the dissolution rate of Al_(2)O_(3);rods in CaF_(2)-CaO-Al_(2)O_(3) slag increases with the increase in rotating speed and temperature,and the rate-controlling step is the mass transfer in the *** dissolution rate of Al_(2)O,in CaF_(2)-CaO-Al_(2)O_(3) slag increases with the increase in the ratio of CaO to Al_(2)O_(3),which is due to the increase in dissolution driving force and the decrease in slag *** apparent activation energy of the mass transfer of AlOs in slag C is calculated to be 222.86 kJ mol^(-1).During the dissolution of Al_(2)0,inclusions in the slag,it reacts with F in liquid slag at first,then reacts with CaO to form the intermediate compounds of xCaO-yAl_(2)O_(3) system,and finally dissolves in molten *** dissolution rate of Al_(2)O_(3) inclusions in CaF_(2)-CaO-Al_(2)O_(3) slag for electroslag remelting is positively correlated with the ratio of the dissolution driving force and slag viscosity,and the correlation coeficient is 2.487×10^(-11).

关键词： Inclusion Electroslag remelting Mass transfer:Dissolution rate-Dissolution driving force

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

XGBoost-based model for predicting hydrogen content in electroslag remelting

引用

Journal of Iron and Steel Research(International) 2023年第5期30卷 887-896页

作者： yu-xiao liu Yan-wu Dong Zhou-hua Jiang yu-shuo li Wei Zha Yao-xin Du Shu-yang Du School of Metallurgy Northeastern UniversityShenyang 110819LiaoningChina Key Laboratory of Ecological Metallurgy of Multimetallic Mineral Northeastern UniversityShenyang 110819LiaoningChina State Key Laboratory of Rolling and Automation Northeastern UniversityShenyang 110819LiaoningChina

An Xtreme Gradient Boosting(XGBoost)-based endpoint hydrogen content prediction model was proposed for the electroslag remelting process,the data collected in the field were pre-processed,and the characteristic variables of the physical parameters related to the variation of hydrogen content in the electroslag remelting process were selected by machine learning analysis and metallurgical *** kernel ridge regression model,ridge regression model,XGBoost model,support vector regression model and gradient boosting regression model were developed and validated using the electroslag remelting data collected from the steel mills,and the model structure and parameters were adjusted several *** prediction accuracy of hydrogen content was compared *** XGBoost model was validated for the test set with the following hit rates:70.59%,82.35% and 100% for the endpoint hits at the allowable hydrogen content error of ±0.05×10^(-6),±0.10×10^(-6) and ±0.50×10^(-6),respectively.

关键词： Electroslag remelting Hydrogen content Machine learning XGBoost Prediction model

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Quick-scanning X-ray absorption fine structure beamline at SSRF

引用

Nuclear Science and Techniques 2024年第6期35卷 1-13页

作者： yu Chen Qian Gao Zheng Jiang Jiong li shuo Zhang Shanghai Synchrotron Radiation Facility Shanghai Advanced Research InstituteChinese Academy of SciencesShanghai 201204China National Synchrotron Radiation Laboratory University of Science and Technology of ChinaHefei 230029China

The layout and characteristics of the hard X-ray spectroscopy beamline(BL11B)at the Shanghai synchrotron radiation facility are described ***11B is a bending-magnet beamline dedicated to conventional and millisecond-scale quick-scanning X-ray absorption fine *** is equipped with a cylindrical collimating mirror,a double-crystal monochromator comprising Si(111)and Si(311),a channel-cut quick-scanning Si(111)monochromator,a toroidal focusing mirror,and a high harmonics rejection *** can provide 5-30 keV of X-rays with a photon flux of~5×10^(11)photons/s and an energy resolution of~1.31×10^(-4)at 10 *** performance of the beamline can satisfy the demands of users in the fields of catalysis,materials,and environmental *** paper presents an overview of the beamline design and a detailed description of its performance and capabilities.

关键词： Bending magnet beamline X-ray absorption fine structure Quick-scanning XAFS In situ Synchrotron radiation

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Strengthening mechanism and forming control of linear friction welded GH4169 alloy joints

引用

Chinese Journal of Aeronautics 2024年第4期37卷 609-626页

作者： yu SU Xiawei YANG Tingxi MENG Xinyuan HE Dong WU Wenya li shuo YIN State Key Laboratory of Solidification Processing School of Materials Science and EngineeringNorthwestern Polytechnical UniversityXi’an 710072China Shaanxi Key Laboratory of Friction Welding Technologies School of Materials Science and EngineeringNorthwestern Polytechnical UniversityXi’an 710072China Department of Mechanical Manufacturing and Biomedical EngineeringParsons BuildingTrinity College DublinThe University of DublinDublin 2Ireland

Numerical simulation and experimental research on linear Friction Welding(LFW) for GH4169 superalloy were carried out. Based on the joint microstructure and mechanical properties,a suitable welding process was determined, which provided an important theoretical basis for the manufacture and repair of aeroengine components such as the superalloy blisk. The results show that the joint strain rate gradually increases with the increase of welding frequency, and the deformation resistance of the thermoplastic metal increases in the welding process, resulting in the interface thermoplastic metal not being extruded in time to form a flash, so the joint shortening amount gradually decreases. The thermoplastic metal in the center of the welding surface is kept at high welding temperature for a long time, resulting in the decrease of the joint strength. The microhardness of the joint shows a “W” distribution perpendicular to the weld, and most of the joints break in the Thermo-Mechanically Affected Zone(TMAZ) with high tensile strength and low *** the welding area is increased without changing the aspect ratio of the welding surface, the interface peak temperature increases gradually, and the joint shortening amount decreases with the increase of the welding interface size.

关键词： linear Friction Welding(LFW) Microstructure Mechanical properties Numerical simulation Joint shortening amount

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

lin28 as a therapeutic target for central nervous system regeneration and repair

引用

Neural Regeneration Research 2024年第2期19卷 397-398页

作者： shuo Wang Shuxin li Shriners Hospitals Pediatric Research Center Department of Neural SciencesLewis Katz School of Medicine at Temple UniversityPhiladelphiaPAUSA

Axon disconnection in the central nervous system(CNS) usually causes signal transduction failure and severe functional deficits in patients with neurological disorders. Currently, there is no cure for patients with CNS axon injury and they usually suffer from life-long neurological defects(e.g., paralysis, loss of sensory function, and autonomic dysfunction) and life-threatening complications(e.g., autonomic dysreflexia).

关键词： paralysis therapeutic system

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Effect of linear friction welding process on microstructure evolution,mechanical properties and corrosion behavior of GH4169 superalloy

引用

Chinese Journal of Aeronautics 2024年第6期37卷 504-520页

作者： yu SU Xiawei YANG Tingxi MENG Dong WU Rui XU Haiyu XU Wenya li shuo YIN State Key Laboratory of Solidification Processing School of Materials Science and EngineeringNorthwestern Polytechnical UniversityXi’an 710072China Department of Mechanical Manufacturing&Biomedical EngineeringParsons BuildingTrinity College DublinThe University of DublinDublin 2Ireland

linear Friction Welding(LFW)technology was used to realize the welding of GH4169 superalloy,and the effect of welding parameters on the microstructure,mechanical properties and corrosion behavior of the joint was *** results show that there is a positive correlation between the weld hardness and the tensile *** the gradual increase of heat input and welding pressure,the joint quality is gradually improved,but the heat affected zone is not significantly *** smaller the grain size of the weld,the higher the strength and plasticity of the *** the increase of the joint shortening amount,the corrosion resistance of the weld first gradually ***,when the shortening reaches a certain level,the corrosion resistance of the joint becomes little *** the increase of solution temperature,the corrosion current density increases and the polarization impedance *** higher the corrosion temperature,the worse the corrosion resistance of the *** is no significant correlation between the joint strength and the corrosion *** corrosion resistance of the joint can be enhanced without changing the joint mechanical properties by reducing the welding frequency and amplitude or increasing the welding pressure.

关键词： linear FrictionWelding(LFW) GH4169 superalloy Microstructure Mechanical properties Corrosion behavior

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Illuminating spin-crossover octanuclear metal-organic cages

引用

Science China Chemistry 2024年第4期67卷 1208-1215页

作者： Zhi-Kun liu Alyona A.Starikova yu-Xia li Ke Sun Meng yu Zi-shuo Yao Jun Tao Key Laboratory of Cluster Science of Ministry of Education School of Chemistry and Chemical EngineeringLiangxiang CampusBeijing Institute of TechnologyBeijing 102488China Institute of Physical and Organic Chemistry Southern Federal UniversityRostov-on-Don 344090Russia

Spin-crossover(SCO)materials that reversibly switch between high-and low-spin states have potential for the storage of spin state-relative information,and have gained much attention incorporating secondary physical properties,such as fluorescence and magneto-optical *** this study,we synthesized three octanuclear metal-organic cages(MOCs)using tetraphenylethylene-based luminophores,aldehydes,and Fe^(Ⅱ)salts,by subcomponent self-assembly approach,namely[Fe1]-[Fe3].By controlling the ligand-field strength and guest encapsulation,we finely tuned their SCO *** them,MOC[Fe2]displayed nearly complete SCO behavior in the solid state,which is rare for high-nuclearity *** also demonstrated the coupling of SCO with fluorescence emission in these MOCs by using isostructural Zn^(Ⅱ)complexes([Zn1]-[Zn3])as control experiments,for the first *** calculations revealed the energy-transfer mechanism between fluorophores and SCOactive centers,which emphasizes the significant contribution of d-d transitions in the interplay between the occurrence of SCO and fluorescence emission.

关键词： metal-organic cages spin crossover fluorescence switching materials DFT calculation

来源：

维普期刊数据库

同方期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Hole cleaning evaluation and installation spacing optimization of cuttings bed remover in extended-reach drilling

引用

Petroleum Science 2024年第3期21卷 2005-2022页

作者： shuo Peng Wen-Jun Huang De-li Gao MOE Key Laboratory of Petroleum Engineering China University of Petroleum-Beijing State Key Laboratory of Petroleum Resources and Engineering China University of Petroleum-Beijing

In extended-reach or long-horizontal drilling, cuttings usually deposit at the bottom of the annulus. Once cuttings accumulate to a certain thickness, complex problems such as excessive torque and drag, tubing buckling, and pipe stuck probably occur, which results in a lot of non-productive time and remedial operations. Cuttings bed remover can efficiently destroy deposited cuttings in time through hydraulic and mechanical stirring effects. This paper aims to build a method for hole cleaning evaluation and installation spacing optimization of cuttings bed remover to improve the wellbore cleaning effect. Firstly,a Computational Fluid Dynamics approach with Eulerian—Eulerian multiphase model was utilized to investigate the mechanism of cuttings transportation, and a new type of cuttings bed remover was designed. Next, an evaluation method of hole cleaning effect of remover was established. After that, the effects of several drilling parameters on hole cleaning including flow rate of drilling fluid, rotational speed of drillpipe, rate of penetration, wellbore size, rheological property of drilling fluid, and remover eccentricity on the performance of cuttings bed remover were investigated. The results demonstrate that the new type of remover with streamline blade performs better than conventional removers. The efficiency of hole cleaning is greatly improved by increasing the rotational speed of drillpipe, flow rate of drilling fluid, remover eccentricity, and 6 rpm Fann dial reading for drilling fluid. While higher rate of penetration and large wellbore size result in worse hole cleaning. These findings can serve as an important guide for the structure optimization design of cuttings bed remover and installation spacing of removers.

关键词： Extended-reach drilling Drilling hydraulics Cuttings transport Hole cleaning Cuttings bed remover

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Efficacy and safety of Usights UC100 illuminated microcatheter in microcatheter-assisted trabeculotomy

引用

International Journal of Ophthalmology(English edition) 2024年第2期17卷 272-277页

作者： shuo yu Ke Xu Chun Zhang Department of Ophthalmology Peking University Third HospitalBeijing 100191China Beijing Key Laboratory of Restoration of Damaged Ocular Nerve Peking University Third HospitalBeijing 100191China

AIM:To evaluate the efficacy and safety of Usights UC100 illuminated microcatheter in microcatheter-assisted trabeculotomy(MAT).METHODS:Totally 10 eyes of 10 patients with primary open angle glaucoma(POAG)who underwent MAT facilitated by Usights UC100(5 eyes)or iTrack(5 eyes)were *** success of this surgery was defined as intraocular pressure(IOP)30%reduction,without oral glaucoma medications,or additional glaucoma ***:The mean pre-operative IOP was 25.38±10.22 mm Hg in the Usights UC100 group and 19.98±3.87 mm Hg in the iTrack *** was achieved in all eyes in both *** success rates for the Usights UC100 group and iTrack groups were in all and 4 eyes,*** microcatheters produced a statistically significant reduction in IOP,and eyes using Usights UC100 achieved a lower IOP than the iTrack group at 3mo followup(12.58±1.52 and 14.84±1.89 mm Hg,respectively),but no statistical significance was *** severe side effects were observed in either ***:MAT using Usights UC100 or iTrack both achieve significant pressure reduction in cases of POAG,and Usights UC100 is as safe as iTrack.

关键词： illuminated microcatheter microcatheterassisted trabeculotomy primary open angle glaucoma

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Simulation of nanofluid natural convection based on single-particle hydrodynamics in energy-conserving dissipative particle dynamics(eDPD)

引用

Applied Mathematics and Mechanics(English Edition) 2024年第8期45卷 1429-1446页

作者： Wei LU shuo CHEN Zhiyuan yu Jiayi ZHAO School of Aerospace Engineering and Applied Mechanics Tongji University Shanghai Key Laboratory of Vehicle Aerodynamics and Vehicle Thermal Management Systems Tongji University School of Energy and Power Engineering University of Shanghai for Science and Technology

In the present study, the nanofliud natural convection is investigated by the energy-conserving dissipative particle dynamics(eDPD) method, where the nanoparticles are considered at the single-particle level. The thermal expansion coefficient β and the viscosity μ of the simulated system containing nanoparticles are calculated and found to be in close alignment with the previous simulation results. The single-particle hydrodynamics in e DPD enables simulations of nanofluid natural convection with higher Rayleigh numbers and greater nanoparticle volume fractions. Additionally, this approach is utilized to simulate the nanoparticle distribution during the enhanced heat transfer process in the nanofluid natural convection. The localized aggregation of nanoparticles enhances the heat transfer performance of the nanofluid under specific Rayleigh numbers and nanoparticles volume fractions.

关键词： 68U01 energy-conserving dissipative particle dynamics (eDPD) heat transfer nanofluid nanoparticle O351.2 single-particle hydrodynamics

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：