检索结果-南通市图书馆

Stepped-up development of accelerator mass spectrometry method for the detection of ^(60)Fe with the HI-13 tandem accelerator

引用

Nuclear Science and Techniques 2024年第4期35卷 136-143页

作者： Yang zhang Sheng-Quan Yan Ming He Qing-zhang Zhao Wen-Hui zhang Chao-Xin Kan Jian-Ming Zhou Kang-Ning Li Xiao-Fei Wang Jian-Cheng Liu Zhao-Hua Peng Zhuo Liang Ai-Ling Li Jian Zheng Qi-Wen Fan yun-Ju Li You-Bao Wang Zhi-Hong Li Yang-Ping Shen Ding Nan Wei Nan yu-qiang zhang Jia-Ying-Hao Li Jun-Wen Tian Jiang-Lin Hou Chang-Xin Guo Zhi-Cheng zhang Ming-Hao Zhu yu-Wen Chen yu-Chen Jiang Tao Tian Jin-Long Ma Yi-Hui Liu Jing-yu Dong Run-Long Liu Mei-yue-Nan Ma Yong-Shou Chen Wei-Ping Liu Bing Guo China Institute of Atomic Energy P.O.Box 275(10)Beijing 102413China College of Science Southern University of Science and TechnologyShenzhen 518055China School of Physics Xi’an Jiaotong UniversityXi’an 710049China

The Moon provides a unique environment for investigating nearby astrophysical events such as *** samples retain valuable information from these events,via detectable long-lived“fingerprint”radionuclides such as^(60)*** this work,we stepped up the development of an accelerator mass spectrometry(AMS)method for detecting^(60)Fe using the HI-13tandem accelerator at the China Institute of Atomic Energy(CIAE).Since interferences could not be sufficiently removed solely with the existing magnetic systems of the tandem accelerator and the following Q3D magnetic spectrograph,a Wien filter with a maximum voltage of±60 kV and a maximum magnetic field of 0.3 T was installed after the accelerator magnetic systems to lower the detection background for the low abundance nuclide^(60)Fe.A 1μm thick Si_(3)N_(4) foil was installed in front of the Q3D as an energy *** particle detection,a multi-anode gas ionization chamber was mounted at the center of the focal plane of the ***,an^(60)Fe sample with an abundance of 1.125×10^(-10)was used to test the new AMS *** results indicate that^(60)Fe can be clearly distinguished from the isobar^(60)*** sensitivity was assessed to be better than 4.3×10^(-14)based on blank sample measurements lasting 5.8 h,and the sensitivity could,in principle,be expected to be approximately 2.5×10^(-15)when the data were accumulated for 100 h,which is feasible for future lunar sample measurements because the main contaminants were sufficiently separated.

关键词： Accelerator mass spectrometry Wien filter Isobar separation Supernovae Chang'e-5 lunar samples

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Fuzzy Nash equilibrium of fuzzy n-person non-cooperative game

引用

Journal of Systems Engineering and Electronics 2010年第1期21卷 47-56页

作者： Xiaohui yu qiang zhang School of Management and Economics Beijing Institute of Technology Beijing 100081 P. R. China

The fuzzy non-cooperative game with fuzzy payoff function is studied. Based on fuzzy set theory with game theory, the fuzzy Nash equilibrium of fuzzy non-cooperative games is proposed. Most of researchers rank fuzzy number by its center of gravity or by the real number with its maximal membership. By reducing fuzzy number into a real number, we lose much fuzzy information that should be kept during the operations between fuzzy numbers. The fuzzy quantities or alternatives are ordered directly by yuan＇s binary fuzzy ordering relation. In doing so, the existence of fuzzy Nash equilibrium for fuzzy non-cooperative games is shown based on the utility function and the crisp Nash theorem. Finally, an illustrative example in traffic flow patterns of equilibrium is given in order to show the detailed calculation process of fuzzy Nash equilibrium.

关键词： operational research Nash equilibrium preference relations fuzzy game theory.

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Density-Functional Theories for Polyelectrolyte Systems

引用

Chinese Journal of Polymer Science 2024年第9期42卷 1302-1312,I0006页

作者： Jia-Wei zhang yu-Hang zhang Bao-Hui Li qiang Wang School of Physics Nankai UniversityTianjin90001China Department of Chemical and Biological Engineering Colorado State University1370 Campus DeliveryFort CollinsCO80523-1370USA

Polymer density-functional theories(PDFTs)have distinct advantages in the study of polyelectrolyte(PE)systems over experiments and molecular *** we give an introductory review of some PDFTs recently developed for PE *** start with a general formalism of PDFTs and its relation to the widely used polymer self-consistent field theory(SCFT),then explain the various correlations that are neglected in SCFT but can be accounted for in PDFTs,including those due to the excluded-volume interaction and chain connectivity of uncharged polymers,the electrostatic correlations of small ions,and the chain correlations in *** also list some applications of PDFTs for PE systems,and finally give some perspectives on future *** hope that our review can attract more researchers to apply and further develop PDFTs as a promising class of theoretical and computational tools.

关键词： Polymer density-functional theories Polyelectrolytes Correlations

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Simulating the GRF of Humanoid Robot Vertical Jumping Using a Simplified Model with a Foot Structure for Foot Design

引用

Journal of Bionic Engineering 2024年第1期21卷 112-125页

作者： Chuanku Yi Xuechao Chen yu zhang zhangguo yu Haoxiang Qi Yaliang Liu qiang Huang School of Mechatronical Engineering Beijing Institute of TechnologyZizhuyaunHaidianBeijing 100081China Beijing Advanced Innovation Center for Intelligent Robots and Systems Beijing Institute of Tec

There are many theories and tools for human or robot motion simulation,but most of them require complex *** LNZN model(a simplified model named by the proposers)simplifies the human model and facilitates simulation of the Ground Reaction Force(GRF)of body landing by spring damping model and ignoring joint rotation movements,which can reduce the amount of computation *** this paper,the LNZN model of human running is selected as the basis and is modified to obtain the LNZN model of a robot,which expands the application of the LNZN *** to the structure of the human foot,a foot structure is then added to the simplified model to reduce the *** also applied driving forces to the new model to simulate the whole high jump motion of the robot to expand the functions of the LNZN *** obtained GRF data were anastomotic to the actual experimental *** addition,the effects of variables,such as the mass,hardness,and damping,of the foot on the GRF at the moment of landing were also ***,based on the guidelines obtained for the design of the robot’s foot structure,we fabricated new robot’s feet and installed them on the actual robot and achieved a better cushioning effect than the original foot in experiments.

关键词： LNZN model-GRF simulation Humanoid foot structure Foot parameters

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Preface:special topic on rechargeable battery technology

引用

Science China Chemistry 2024年第1期67卷 1-3页

作者： yu-Guo Guo qiang zhang Jun Chen Li-Jun Wan CAS Key Laboratory of Molecular Nanostructure and Nanotechnology CAS Research/Education Center for Excellence in Molecular SciencesBeijing National Laboratory for Molecular Sciences(BNLMS)Institute of ChemistryChinese Academy of Sciences(CAS)Beijing 100190China University of Chinese Academy of Sciences Beijing 100049China Beijing Key Laboratory of Green Chemical Reaction Engineering and Technology Department of Chemical EngineeringTsinghua UniversityBeijing 100084China Frontiers Science Center for New Organic Matter Renewable Energy Conversion and Storage Center(RECAST)Haihe Laboratory of Sustainable Chemical TransformationsKey Laboratory of Advanced Energy Materials Chemistry(Ministry of Education)College of ChemistryNankai UniversityTianjin 300071China

Rechargeable batteries play a major role in the transition from fossil energy to renewable energy and are considered the key-enabling decarbonization technology for several industries,including electronics,transportat... 详细信息

关键词： battery artificial technology

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Micro defects formation and dynamic response analysis of steel plate of quasi-cracking area subjected to explosive load

引用

Defence Technology（防务技术） 2024年第1期31卷 580-593页

作者： Zheng-qing Zhou Ze-chen Du Xiao Wang Hui-ling Jiang qiang Zhou yu-long zhang yu-zhe Liu Pei-ze zhang Research Institute of Macro-Safety Science University of Science and TechnologyBeijing100083China School of Civil and Resource Engineering University of Science and Technology BeijingBeijing100083China School of Mechanical Engineering Nantong UniversityNantong226019China China North Industry Advanced Technology Generalization Institute Beijing100089China China Academy of Ordnance Science China

As the protective component,steel plate had attracted extensive attention because of frequently threats of explosive *** this paper,the evolution of microstructure and the mechanism of damage in the quasi-cracking area of steel plate subjected to explosive load were discussed and the relationships between micro defects and dynamic mechanical response were *** the explosion experiment,five observation points were selected equidistant from the quasi-cracking area of the section of the steel plate along the thickness direction,and the characteristics of micro defects at the observation points were analyzed by optical microscope(OM),scanning electron microscope(SEM) and electron backscattered diffraction(EBSD).The observation result shows that many slip bands(SBs) appeared,and the grain orientation changed obviously in the steel plate,the two were the main damage types of micro *** addition,cracks,peeling pits,grooves and other lager micro defects were appeared in the lower area of the *** stress parameters of the observation points were obtained through an effective numerical *** mechanism of damage generation and crack propagation in the quasicracking area were clarified by comparing the specific impulse of each observation point with the corresponding micro *** result shows that the generation and expansion of micro defects are related to the stress area(*** upper compression area,the neutral plane area,and the lower tension area).The micro defects gather and expand at the grain boundary,and will become macroscopic damage under the continuous action of tensile ***,the micro defects at the midpoint of the section of the steel plate in the direction away from the explosion center(*** horizontal direction) were also *** was found that the specific impulse at these positions were much smaller than that in the thickness direction,the micro defects were only SBs and a few micro cracks,and the those decrea

关键词： Explosive load Quasi-cracking area Micro defects Steel plate Dynamic response Numerical simulation

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

From Liquid to Solid‑State Lithium Metal Batteries:Fundamental Issues and Recent Developments

引用

Nano-Micro Letters 2024年第2期16卷 68-125页

作者： Zhao zhang Wei‑qiang Han School of Materials Science and Engineering Zhejiang UniversityHangzhou 310027People’s Republic of China

The widespread adoption of lithium-ion batteries has been driven by the proliferation of portable electronic devices and electric vehicles,which have increasingly stringent energy density *** metal batteries(LMBs),with their ultralow reduction potential and high theoretical capacity,are widely regarded as the most promising technical pathway for achieving high energy density *** this review,we provide a comprehensive overview of fundamental issues related to high reactivity and migrated interfaces in ***,we propose improved strategies involving interface engineering,3D current collector design,electrolyte optimization,separator modification,application of alloyed anodes,and external field regulation to address these *** utilization of solid-state electrolytes can significantly enhance the safety of LMBs and represents the only viable approach for advancing *** review also encompasses the variation in fundamental issues and design strategies for the transition from liquid to solid *** noteworthy is that the introduction of SSEs will exacerbate differences in electrochemical and mechanical properties at the interface,leading to increased interface inhomogeneity—a critical factor contributing to failure in all-solidstate lithium metal *** on recent research works,this perspective highlights the current status of research on developing high-performance LMBs.

关键词： Lithium metal batteries All-solid-state lithium metal battery Li dendrite Solid electrolyte Interface

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Accurate simulations of pure-viscoacoustic wave propagation in tilted transversely isotropic media

引用

Petroleum Science 2024年第2期21卷 866-884页

作者： qiang Mao Jian-Ping Huang Xin-Ru Mu Ji-Dong Yang yu-Jian zhang Geosciences Department China University of Petroleum(East China)Qingdao266580ShandongChina Pilot National Laboratory for Marine Science and Technology(Qingdao) Qingdao266207ShandongChina

Forward modeling of seismic wave propagation is crucial for the realization of reverse time migration(RTM) and full waveform inversion(FWI) in attenuating transversely isotropic media. To describe the attenuation and anisotropy properties of subsurface media, the pure-viscoacoustic anisotropic wave equations are established for wavefield simulations, because they can provide clear and stable wavefields. However, due to the use of several approximations in deriving the wave equation and the introduction of a fractional Laplacian approximation in solving the derived equation, the wavefields simulated by the previous pure-viscoacoustic tilted transversely isotropic(TTI) wave equations has low accuracy. To accurately simulate wavefields in media with velocity anisotropy and attenuation anisotropy, we first derive a new pure-viscoacoustic TTI wave equation from the exact complex-valued dispersion formula in viscoelastic vertical transversely isotropic(VTI) media. Then, we present the hybrid finite-difference and low-rank decomposition(HFDLRD) method to accurately solve our proposed pure-viscoacoustic TTI wave equation. Theoretical analysis and numerical examples suggest that our pure-viscoacoustic TTI wave equation has higher accuracy than previous pure-viscoacoustic TTI wave equations in describing q P-wave kinematic and attenuation characteristics. Additionally, the numerical experiment in a simple two-layer model shows that the HFDLRD technique outperforms the hybrid finite-difference and pseudo-spectral(HFDPS) method in terms of accuracy of wavefield modeling.

关键词： Pure-viscoacoustic TTI wave equation Attenuation anisotropy Seismic modeling Low-rank decomposition method

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Analysis of mechanical strengths of extreme line casing joint considering geometric, material, and contact nonlinearities

引用

Petroleum Science 2024年第3期21卷 1992-2004页

作者： Ji-yun zhang Chi Peng Jian-Hong Fu Quan Cao yu Su Jian-yun Pang Zi-qiang yu Petroleum Engineering School Southwest Petroleum UniversityChengdu610500SichuanChina Engineering Technology Research Institute of CNPC Southwest Oil and Gas Field Company Chengdu610017SichuanChina

To address the challenges associated with difficult casing running,limited annular space,and poor cementing quality in the completion of ultra-deep wells,the extreme line casing offers an effective solution over conventional ***,due to its smaller size,the joint strength of extreme line casing is reduced,which may cause failure when running in the *** address this issue,this study focuses on the CST-ZTΦ139.7 mm×7.72 mm extreme line casing and employs the elastic-plastic mechanics to establish a comprehensive analysis of the casing joint,taking into account the influence of geometric and material nonlinearities.A finite element model is developed to analyze the forces and deformations of the extreme line casing joint under axial tension and external collapse *** model investigates the stress distribution of each thread tooth subjected to various tensile forces and external ***,the tensile strength and crushing strength of the extreme line casing joint are determined through both analytical and experimental *** findings reveal that,under axial tensile load,the bearing surface of each thread tooth experiences uneven stress,with relatively high equivalent stress at the root of each thread *** end thread teeth are valuable spots for *** is observed that the critical fracture axial load of thread decreases linearly with the increase of thread tooth *** external pressure,the circumferential stress is highest at the small end of the external thread,leading to yield *** tensile strength of the joint obtained from the finite element model exhibits a relative error of less than 7%compared to the analytical and experimental values,proving the reliability of the finite element *** tensile strength of the joint is 3091.9 k ***,in terms of anti-collapse capability,the joints demonstrate higher resistance to collapse compared to the casing body,which is consistent with the test resul

关键词： Extreme line casing Elastic-plastic mechanics Finite element analysis Tensile strength Collapse strength

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Enhanced High-Temperature Energy Storage Performance of All-Organic Composite Dielectric via Constructing Fiber-Reinforced Structure

引用

Energy & Environmental Materials 2024年第2期7卷 303-311页

作者： Mengjia Feng yu Feng Changhai zhang Tiandong zhang Xu Tong qiang Gao Qingguo Chen Qingguo Chi Key Laboratory of Engineering Dielectrics and Its Application Ministry of Education Harbin University of Science and Technology School of Electrical and Electronic Engineering Harbin University of Science and Technology

Optimizing the high-temperature energy storage characteristics of energy storage dielectrics is of great significance for the development of pulsed power devices and power control *** a polymer with a higher glass transition temperature（Tg） as the matrix is one of the effective ways to increase the upper limit of the polymer operating ***,current high-Tgpolymers have limitations,and it is difficult to meet the demand for high-temperature energy storage dielectrics with only one *** example,polyetherimide has high-energy storage efficiency,but low breakdown strength at high *** has high corona resistance,but low high-temperature energy storage *** this work,combining the advantages of two polymer,a novel high-Tgpolymer fiberreinforced microstructure is *** is designed as extremely fine fibers distributed in the composite dielectric,which will facilitate the reduction of high-temperature conductivity loss for *** the same time,due to the high-temperature resistance and corona resistance of polyimide,the high-temperature breakdown strength of the composite dielectric is *** the polyimide content with the best hightemperature energy storage characteristics is determined,molecular semiconductors（ITIC） are blended into the polyimide fibers to further improve the high-temperature ***,excellent hightemperature energy storage properties are *** 0.25 vol% ITICpolyimide/polyetherimide composite exhibits high-energy density and high discharge efficiency at 150℃(2.9 J cm-3,90%) and 180℃(2.16 J cm-3,90%).This work provides a scalable design idea for high-performance allorganic high-temperature energy storage dielectrics.

关键词： all-organic energy storage density high-temperature high-temperature breakdown strength

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：