检索结果-南通市图书馆

Journal of Bionic Engineering 2024年第3期21卷 1360-1374页

作者： Weilan Liu Kunlong Li Yizhou Shen Huanyu Zhao Yaru ni Zeyu Cai Lingfeng Zhao Zhen Wang Institute of Advanced Materials(IAM) School of Materials Science and EngineeringNanjing Tech UniversityNanjing211816China College of Materials Science and Technology Nanjing University of Aeronautics and AstronauticsNanjing211100China Aviation Industry Aerodynamics Research Institute of China Shenyang110000China

Superhydrophobic coatings with high non-wetting properties are widely applied in anti-icing ***,the micro-nanostructures on the surfaces of superhydrophobic coatings are fragile under external forces,resulting in reduced ***,mechanical strength and durability play a crucial role in the utilization of superhydrophobic *** this study,we employed a two-step spraying method to fabricate superhydrophobic FEVE-based coatings with exceptional mechanical durability,utilizing fluorinated TiO_(2)nanoparticles and fluorinated Al_(2)O_(3)microwhiskers as the *** composite coating exhibited commendable non-wetting properties,displaying a contact angle of 164.84°and a sliding angle of 4.3°.On this basis,the stability of coatings was significantly improved due to the interlocking effect of Al_(2)O_(3)*** 500 tape peeling cycles,500 sandpaper abrasion tests,and 50 kg falling sand impact tests,the coatings retained superhydrophobicity,exhibiting excellent durability and application ***,the ice adhesion strength on the coatings was measured at only 65.4 kPa,while the icing delay time reached 271.8 s at-15℃.In addition,throughout 500 freezing/melting cycles,statistical analysis revealed that the superhydrophobic coatings exhibited a freezing initiation temperature as low as-17.25℃.

关键词： Superhydrophobic coatings Anti-icing Mechanical durability

Development of the electric automatic steering system for agricultural vehicles

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

International Journal of Agricultural and Biological Engineering 2024年第1期17卷 209-214页

作者： Guangshun An Chong Yu Juan Du Xiang Yin Youliang ni Chengqian Jin School of Agricultural Engineering and Food Science Shandong University of TechnologyZibo 255000ShandongChina Nanjing Research Institute for Agricultural Mechanization of Ministry of Agriculture and Rural Affairs Nanjing 210014China

Automatic guidance of agricultural vehicles requires automatic execution of operation commands received from the navigation controller by using electronically controlled mechanisms for wheel steering,speed changing and work *** steering contributes as a prerequisite technique in automatic and semi-automatic agricultural *** research aimed to develop an electric automatic steering system that was compact in its structure and integrated into original steering mechanism in a simply and convenient way for aftermarket modification.A brushless motor and reducer assembly was utilized to provide an adequate steering torque instead of manual maneuver.A rapid assembling approach was proposed by passing the steering shaft through the hollow output shaft.A digital proportional-integral-differential(PID)algorithm was implemented to calculate the rotation speeds and directions by comparing the desired angle and the actual angle,which was implemented in a printed circuit board with a microcontroller unit(MCU)and interface *** unmanned wheeled tractor was applied as test platform to integrate the newly developed electric automatic steering *** were conducted to evaluate its performance in terms of stability and *** autonomous navigation system guided the tractor along target paths in the field by sending steering commands to the electric automatic steering *** results show that the steering angle error was less than 0.81°when desired steering angle was less than 10°.The lateral error difference was no more than 4.76 cm when repeating following the same target path,which indicated that the electric automatic steering system responded accurately and robustly to steering commands.

关键词： automatic steering automatic navigation agricultural vehicles

Development of a DFN-based probabilistic block theory approach for bench face angle design in open pit mining

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Rock Mechanics and Geotechnical Engineering 2024年第8期16卷 3047-3062页

作者： Jianhua Yan Xiansen Xing Zhihai Li Weida ni Liuyuan Zhao Chun Zhu Yuanyuan He School of Earth Sciences and Engineering Hohai UniversityNanjing210098China POWERCHINA Huadong Engineering Corporation Limited Hangzhou311122China Zhejiang Huadong Construction Corporation Limited Hangzhou310004China The Seventh Geological Brigade of Hubei Geological Bureau Yichang443000China

In open pit mining,uncontrolled block instabilities have serious social,economic and regulatory consequences,such as casualties,disruption of operation and increased regulation *** this reason,bench face angle,as one of the controlling parameters associated with block instabilities,should be carefully designed for sustainable *** study introduces a discrete fracture network(DFN)-based probabilistic block theory approach for the fast design of the bench face angle.A major advantage is the explicit incorporation of discontinuity size and spatial distribution in the procedure of key blocks *** proposed approach was applied to a granite mine in ***,DFN models were generated from a multi-step modeling procedure to simulate the complex structural characteristics of pit ***,a modified key blocks searching method was applied to the slope faces modeled,and a cumulative probability of failure was obtained for each ***,a bench face angle was determined commensurate with an acceptable risk level of *** simulation results have shown that the number of hazardous traces exposed on the slope face can be significantly reduced when the suggested bench face angle is adopted,indicating an extremely low risk of uncontrolled block instabilities.

关键词： Open pit mine Bench face angle Block theory Probabilistic approach Discrete fracture network modeling Fractured rock slope

Molecule aging induced by electron attacking

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第6期93卷 519-525,I0013页

作者： Ping Song Yining Dong Xue Gong Mingbo Ruan Baoxin ni Xuanhao Mei Kun Jiang Weilin Xu State Key Laboratory of Electroanalytical Chemistry and Jilin Province Key Laboratory of Low Carbon Chemical Power Changchun Institute of Applied ChemistryChinese Academy of SciencesChangchun 130022JilinChina School of Applied Chemistry and Engineering University of Science and Technology of Chin1Hefei 230026AnhuiChina Shanghai Key Laboratory of Molecular Catalysis and Innovative Materials Collaborative Innovation Center of Chemistry for Energy MaterialsDepartment of ChemistryFudan UniversityShanghai 200438China

Here we propose a new concept of"molecule aging":with some special treatment,a molecule could be"aged"by losing some unknown tiny particles or pieces from atoms in the molecule,Such"aging"or loss of unknown tiny particles does not change apparently its molecular structure or chemical composition,but some physicochemical properties could be changed *** further confirm such"molecule aging"via a long-term electron attacking to age water(H_(2)O)*** IR spectra show no structural difference between the fresh water and the aged one,while the NMR spectra show that the electron attacking can decrease the size of water *** facts indicate that the electron attacking indeed can"affect"the structure of water molecule slightly but without damaging to its basic molecule *** exploration reveals that the hydrogen evolution reaction(HER)activity of the aged water molecule is lower than the fresh water on the same Pt/C *** density functional theory calculations indicate that the shortened O-H bond in H_(2)O indeed can present lower HER activity,so the observed size decrease of water clusters from NMR probably could be attributed to the shortening of O-H bond in water *** results indicate significantly that the molecule aging can produce materials with new functions for new possible applications.

关键词： Aging of molecules Electron attacking Full width at half maxima Hydrogen evolution reaction

Lift system optimization for hover-capable flapping wing micro air vehicle

在线全文

学校读者我要写书评

暂无评论

Frontiers of Mechanical Engineering 2024年第3期19卷 61-75页

作者： Shengjie XIAO Yongqi SHI Zemin WANG Zhe ni Yuhang ZHENG Huichao DENG Xilun DING Department of Mechanical Engineering and Automation Beihang UniversityBeijing 100191China Department of Mechanical Engineering Tsinghua UniversityBeijing 100084China Shenzhen International Graduate School Tsinghua UniversityShenzhen 518055China

A key challenge is using bionic mechanisms to enhance aerodynamic performance of hover-capable flapping wing micro air vehicle(FWMAV).This paper presented a new lift system with high lift and aerodynamic efficiency,which use a hummingbird as a bionic *** new lift system is able to effectively utilize the high lift mechanism of hummingbirds,and this study innovatively utilizes elastic energy storage elements and installs them at the wing root to help improve aerodynamic performance.A flapping angle of 154°is achieved through the optimization of the flapping mechanism *** optimized wing shape and parameters are obtained through experimental studies on the ***,the max net lift generated is 17.6%of the flapping wing vehicle’s ***,energy is stored and released periodically during the flapping cycle,by imitating the musculoskeletal system at the wing roots of hummingbirds,thereby improving the energy utilization rate of the FWMAV and reducing power consumption by 4.5%under the same ***,strength verification and modal analyses are conducted on the flapping mechanism,and the weight of the flapping mechanism is reduced through the analysis and testing of different *** results show that the lift system can generate a stable lift of 31.98 g with a wingspan of 175 mm,while the lift system weighs only 10.5 g,providing aerodynamic conditions suitable for high maneuverability flight of FWMAVs.

关键词： lift optimization flapping wing elastic energy hovering flapping mechanism

Study on the green extraction of corncob xylan by deep eutectic solvent

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Grain & Oil Science and Technology 2024年第1期7卷 50-59页

作者： Bingyu Jiao Le Wang Haitao Gui Zifu ni Rong Du Yuansen Hu School of Biological Engineering National Engineering Research Center of Wheat and Corn Further ProcessingZhengzhou 450001China

Corn as one of the world's major food crops,its by-product corn cob is also rich in ***,the unreasonable utilization of corn cob often causes the environmental pollution,waste of resources and other *** one of the most abundant polymers in nature,xylan is widely used in food,medicine,materials and other *** cob is rich in xylan,which is an ideal raw material for extracting ***,the intractable lignin is covalently linked to xylan,which increases the difficulty of xylan *** has been reported that the deep eutectic solvent(DES)could preferentially dissolve lignin in biomass,thereby dissolving the ***,the xylan in the extract was separated by ethanol precipitation *** xylan precipitate was obtained after centrifugation,while the supernatant was *** components of the supernatant after ethanol precipitation were separated by the rotary *** ethanol,water and DES were collected for the subsequent extraction of corn cob *** this study,a novel way was provided for the green production of corn cob *** DES was used to extract xylan from corn cob which was used as the raw *** effects of solid-liquid ratio,reaction time,reaction temperature and water content of DES on the extraction rate of corn cob xylan were investigated by the single factor ***,the orthogonal test was designed to optimize the xylan extraction *** structure of corn cob xylan was analyzed and *** results showed that the optimum extraction conditions of corn cob xylan were as follows:the ratio of corn cob to DES was 1:15(g:mL),the extraction time was 3 h,the extraction temperature was 60℃,and the water content of DES was 70%.Under these conditions,the extraction rate of xylan was 16.46%.The extracted corn cob xylan was distinctive triple helix of polysaccharide,which was similar to the structure of commercially available *** was effectively and workably extracted from corn

关键词： Corncob Deep eutectic solvent Xylan Process optimization Extraction

Formation of free-surface vortex and vortex suppression by rotating stopper-rod at end of tundish casting

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第5期31卷 1104-1116页

作者： Qing Fang Peng Zhao Hua Zhang Wen-hao Zhou Gang Yu Jia-hui Wang Hong-wei ni The State Key Laboratory of Refractories and Metallurgy Wuhan University of Science and TechnologyWuhan430081HubeiChina Hunan Valin Xiangtan Iron and Steel Co. Ltd.Xiangtan411101HunanChina Hubei Provincial Key Laboratory for New Processes of Ironmaking and Steelmaking Wuhan University of Science and TechnologyWuhan430081HubeiChina

A rotating stopper-rod technique was proposed to suppress the formation of free-surface vortex in the *** large eddy simulation model coupled with volume of fluid model was developed to study the steel–slag–gas three-phase flow *** critical slag entrapment height of the free-surface vortex and mass of residual steel were predicted at different rotating speeds(30,60,90 and 120 r/min)of the rotating *** numerical model was verified by water model *** results showed that by rotating the stopper-rod in the opposite direction of the vortex above the submerged entry nozzle,the formation of vortex can be effectively disturbed and the critical height of the free-surface vortex can be *** for the 2nd strand,when the rotating speeds are 30,60,90 and 120 r/min,the critical height of the free-surface vortex above the 2nd strand is 7.3,4.7,6.3 and 7.4 cm,respectively.A reasonable rotating speed should be 60 r/min,which can reduce about 2 tons of residual *** rotating speeds just can reduce about 1.6 tons of residual steel.

关键词： Tundish Free-surface vortex Stopper-rod Numerical simulation Multiphase flow

Amorphous electrocatalysts for urea oxidation reaction

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Progress in Natural Science:Materials International 2024年第2期34卷 362-375页

作者： Fenghui Guo Dongle Cheng Qian Chen Hao Liu Zhiliang Wu ning Han Bing-Jie ni Zhijie Chen School of Materials Science and Technology China University of Geosciences Shenzhen Academy of Metrology and Quality Inspection Centre for Technology in Water and Wastewater School of Civil and Environmental Engineering University of Technology Sydney College of Safety and Environmental Engineering Shandong University of Science and Technology Institute of Yellow River Delta Earth Surface Processes and Ecological Integrity Shandong University of Science and Technology Discipline of Chemical Engineering Western Australian School of Mines: Minerals Energy and Chemical Engineering Curtin University Department of Materials Engineering School of Civil and Environmental Engineering The University of New South Wales

Electrochemical urea oxidation reaction(UOR) is a promising alternative to oxygen evolution reaction(OER) for realizing energy-saving hydrogen production. Developing efficient electrocatalysts for UOR becomes a central challenge. Recently, amorphous materials have been extensively used as UOR catalysts because of their numerous defective sites and flexible electronic properties. In this review, recent advancements in the development of amorphous UOR electrocatalysts are analyzed. The UOR mechanism is discussed, and the design of amorphous catalysts is then analyzed. The main catalyst design strategies are illustrated, including nanostructure control,heteroatom doping, composition regulation, and heterostructure construction. Also, electrocatalysts' structureperformance correlation is interpreted. Perspectives in this field are proposed for guiding future studies on the development of high-performance amorphous catalysts towards energy sustainability.

关键词： Catalyst design Component regulation Heteroatom doping Heterostructures Hydrogen energy

A micro-crosslinked amphoteric hydrophobic association copolymer as high temperature-and salt-resistance fluid loss reducer for water-based drilling fluids

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Petroleum Science 2024年第3期21卷 1980-1991页

作者： Jian Li Yu-Xi Ji Xiao-Xiao ni Kai-He Lv Xian-Bin Huang Jin-Sheng Sun School of Petroleum Engineering China University of Petroleum(East China)Qingdao266580ShandongChina Key Laboratory of Unconventional Oil&Gas Development China University of Petroleum(East China)Qingdao26650ShandongChina Inspection and Testing Center of Huabei Oil Field Company PetroChinaRenqiu062552HebeiChina Drilling Fluid Research Institute CNPC Engineering Technology R&D Company LimitedBeijing102206China

During ultradeep oil and gas drilling,fluid loss reducers are highly important for water-based drilling fluids,while preparing high temperature-and salt-resistance fluid loss reducers with excellent rheology and filtration performance remains a ***,a micro-crosslinked amphoteric hydrophobic association copolymer(i.e.,DADC)was synthesized using N,N-dimethyl acrylamide,diallyl dimethyl ammonium chloride,2-acrylamido-2-methylpropane sulfonic acid,hydrophobic monomer,and pentaerythritol triallyl ether *** to the synergistic effects of hydrogen bonds,electrostatic interaction,hydrophobic association,and micro-crosslinking,the DADC copolymer exhibited outstanding temperature-and *** rheological experiments have shown that the DADC copolymer had excellent shear dilution performance and a certain degree of salt-responsive viscosity-increasing *** DADC copolymer could effectively adsorb on the surface of bentonite particles through electrostatic interaction and hydrogen bonds,which bring more negative charge to the bentonite,thus improving the hydration and dispersion of bentonite particles as well as the colloidal stability of the drilling ***,the drilling fluids constructed based on the DADC copolymer exhibited satisfactory rheological and filtration properties(FLHTHP=12 m L)after aging at high temperatures(up to200℃)and high salinity(saturated salt)***,this work provided new insights into designing and fabricating high-performance drilling fluid treatment agents,demonstrating good potential applications in deep and ultradeep drilling engineering.

关键词： Fluid loss reducer Temperature-and salt-resistance Hydrophobic association Amphoteric Micro-crosslinking

Synthesis of spherical nano-ZSM-5 zeolite with intergranular mesoporous for alkylation of ethylbenzene with ethanol to produce m-diethylbenzene

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Chemical Engineering 2024年第3期67卷 298-309页

作者： Siyue Wang Jinhong Li Qingxin Xu Shengjie Song Yu'ni Jiang Lidong Chen Xin Shi Weiguo Cheng Faculty of Chemistry and Chemical Engineering Liaoning Normal UniversityDalian 110629China Beijing Key Laboratory of Ionic Liquids Clean Process Key Laboratory of Green Process and EngineeringInstitute of Process EngineeringChinese Academy of SciencesBeijing 100190China

Catalytic synthesis of m-diethylbenzene(m-DEB)through alkylation of ethylbenzene(EB)may be a promising alternative route in comparison with traditional rectification of mixed DEB,for which the top priority is to develop efficient and stable heterogeneous ***,the spherical nano-ZSM-5 zeolite with abundant intergranular mesoporous is synthesized by the seed-mediated growth method for alkylation of EB with ethanol to produce *** results show that the spherical nano-ZSM-5 zeolite exhibits better stability and higher alkylation activity at a lower temperature than those of commercial micropore *** then,the spherical nano-ZSM-5 is further modified by La_(2)O_(3) through acid treatment followed by immersion *** acid treatment causes nano-ZSM-5 to exhibit the increased pore size but decreased the acid sites,and subsequent La_(2)O_(3) loading reintroduces the weak acid *** a result,the HNO_(3)-La_(2)O_(3)-modified catalyst exhibits a slight increase in EB conversion and DEB yield in comparison with unmodified one,and meanwhile,it still maintains high m-DEB *** catalyst after acid treatment achieves higher catalytic stability besides maintaining the high alkylation activity of EB with *** present study on the spherical nano-HZSM-5 zeolite and its modification catalyst with excellent alkylation ability provides new insights into the production of mDEB.

关键词： Zeolite Modification Alkylation reaction m-diethylbenzene Catalyst Fixed-bed