检索结果-南通市图书馆

Image Fusion Based on Bioinspired Rattlesnake Visual Mechanism Under Lighting Environments of Day and Night Two Levels

引用

Journal of Bionic Engineering 2024年第3期21卷 1496-1510页

作者： yong wang Hongmin Zou College of Communication Engineering Jilin UniversityChangchun130012China

This study,grounded in Waxman fusion method,introduces an algorithm for the fusion of visible and infrared images,tailored to a two-level lighting environment,inspired by the mathematical model of the visual receptive field of rattlesnakes and the two-mode cells'*** research presented here is segmented into three *** the first segment,we design a preprocessing module to judge the ambient light intensity and divide the lighting environment into two levels:day and *** second segment proposes two distinct network structures designed specifically for these daytime and nighttime *** the daytime images,where visible light information is predominant,we feed the ON-VIS signal and the IR-enhanced visual signal into the central excitation and surrounding suppression regions of the ON-center receptive field in the B channel,***,for nighttime images where infrared information takes precedence,the ON-IR signal and the Visual-enhanced IR signal are separately input into the central excitation and surrounding suppression regions of the ON-center receptive field in the B *** outcome is a pseudo-color fused *** third segment employs five different no-reference image quality assessment methods to evaluate the quality of thirteen sets of pseudo-color images produced by fusing infrared and visible *** images are then compared with those obtained by six other methods cited in the relevant *** empirical results indicate that this study's outcomes surpass the comparative results in terms of average gradient and spatial *** one or two sets of fused images underperformed in terms of standard deviation and entropy when compared to the control *** sets of fused images did not perform as well as the comparison in the QAB/F *** conclusion,the fused images generated through the proposed method show superior performance in terms of scene detail,visual perception,and image sharpness

关键词： Rattlesnake Visible image Infrared image Daylight Bionic

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Long-term operation optimization of circulating cooling water systems under fouling conditions

引用

Chinese Journal of Chemical Engineering 2024年第1期65卷 255-267页

作者： Jiarui Liang yong Tian Shutong Yang yong wang Ruiqi Yin Yufei wang School of Chemical Engineering and Environment China University of PetroleumBeijing102249China CHN Energy Xinjiang Chemical Co. LTDUrumqi830092China College of Mechanical and Transportation Engineering China University of PetroleumBeijing 102249China

Fouling caused by excess metal ions in hard water can negatively impact the performance of the circulating cooling water system(CCWS)by depositing ions on the heat exchanger's ***,the operation optimization of CCWS often prioritizes short-term flow velocity optimization for minimizing power consumption,without considering ***,low flow velocity promotes ***,it's crucial to balance fouling and energy/water conservation for optimal CCWS long-term *** study proposes a mixed-integer nonlinear programming(MINLP)model to achieve this *** model considers fouling in the pipeline,dynamic concentration cycle,and variable frequency drive to optimize the synergy between heat transfer,pressure drop,and *** optimizing the concentration cycle of the CCWS,water conservation and fouling control can be *** model can obtain the optimal operating parameters for different operation intervals,including the number of pumps,frequency,and valve local resistance *** experiments on cycle and environmental temperature reveal that as the cycle increases,the marginal benefits of energy/water conservation *** periods with minimal impact on fouling rate,energy/water conservation can be achieved by increasing the cycle while maintaining a low fouling ***,the proposed model has significant energy/water saving effects and can comprehensively optimize the CCWS through its incorporation of fouling and cycle optimization.

关键词： Computer simulation Circulating water system Fouling Concentration cycle Optimization Variable frequency drive

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Efficient Monolithic Perovskite/Silicon Tandem Photovoltaics

引用

Energy & Environmental Materials 2024年第3期7卷 268-281页

作者： yong wang Yu wang Feng Gao Deren Yang State Key Laboratory of Silicon Materials and School of Materials Science and Engineering Zhejiang UniversityHangzhou 310027China ZJU-Hangzhou Global Scientific and Technological Innovation Center Zhejiang UniversityHangzhou 310014China Department of Physics Chemistry and Biology(IFM)Linköping UniversityLinköping 58183Sweden

Tunable bandgaps make halide perovskites promising candidates for developing tandem solar cells(TSCs),a strategy to break the radiative limit of 33.7%for single-junction solar *** perovskites with market-dominant crystalline silicon(c-Si)is particularly attractive;simple estimates based on the bandgap matching indicate that the efficiency limit in such tandem device is as high as 46%.However,state-of-the-art perovskite/c-Si TSCs only achieve an efficiency of~32.5%,implying significant challenges and also rich *** this review,we start with the operating mechanism and efficiency limit of TSCs,followed by systematical discussions on wide-bandgap perovskite front cells,interface selective contacts,and electrical interconnection layer,as well as photon management for highly efficient perovskite/c-Si *** highlight the challenges in this field and provide our understanding of future research directions toward highly efficient and stable large-scale wide-bandgap perovskite front cells for the commercialization of perovskite/c-Si TSCs.

关键词： 2-terminal electrical interconnection perovskite/silicon tandem photovoltaics photon management wide-bandgap perovskites

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Dynamic performance and parameter optimization of a half-vehicle system coupled with an inerter-based X-structure nonlinear energy sink

引用

Applied Mathematics and Mechanics(English Edition) 2024年第1期45卷 85-110页

作者： yong wang Peili wang Haodong MENG Liqun CHEN .Automotive Engineering Research Institute Jiangsu UniversityZhenjiang 212013Jiangsu ProvinceChina Guangxi Key Laboratory of Automobile Components and Vehicle Technology Guangxi University of Science and TechnologyLiuzhou 545006Guangxi Zhuang Autonomous RegionChina School of Automotive Engineering Changzhou Institute of TechnologyChangzhou 213032Jiangsu ProvinceChina Shanghai Key Laboratory of Mechanics in Energy Engineering Shanghai Frontier Science Center of MechanoinformaticsShanghai Institute of Applied Mathematics and MechanicsSchool of Mechanics and Engineering ScienceShanghai UniversityShanghai 200444China

Inspired by the demand of improving the riding comfort and meeting the lightweight design of the vehicle, an inerter-based X-structure nonlinear energy sink(IXNES) is proposed and applied in the half-vehicle system to enhance the dynamic performance. The X-structure is used as a mechanism to realize the nonlinear stiffness characteristic of the NES, which can realize the flexibility, adjustability, high efficiency, and easy operation of nonlinear stiffness, and is convenient to apply in the vehicle suspension, and the inerter is applied to replacing the mass of the NES based on the mass amplification characteristic. The dynamic model of the half-vehicle system coupled with the IX-NES is established with the Lagrange theory, and the harmonic balance method(HBM) and the pseudo-arc-length method(PALM) are used to obtain the dynamic response under road harmonic excitation. The corresponding dynamic performance under road harmonic and random excitation is evaluated by six performance indices, and compared with that of the original half-vehicle system to show the benefits of the IX-NES. Furthermore, the structural parameters of the IX-NES are optimized with the genetic algorithm. The results show that for road harmonic and random excitation, using the IX-NES can greatly reduce the resonance peaks and root mean square(RMS) values of the front and rear suspension deflections and the front and rear dynamic tire loads, while the resonance peaks and RMS values of the vehicle body vertical and pitching accelerations are slightly *** the structural parameters of the IX-NES are optimized, the vehicle body vertical and pitching accelerations of the half-vehicle system could reduce by 2.41% and 1.16%,respectively, and the other dynamic performance indices are within the reasonable ***, the IX-NES combines the advantages of the inerter, X-structure, and NES, which improves the dynamic performance of the half-vehicle system and provides an effective option for vibrati

关键词： inerter X-structure nonlinear energy sink(NES) half-vehicle system dynamic performance

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Spray characteristics of different regions downstream of a swirl cup

引用

Chinese Journal of Aeronautics 2024年第8期37卷 124-143页

作者： Donghui wang yong HUANG Hongzhou ZHANG Collaborative Innovation Center of Advanced Aero-Engine School of Energy and Power EngineeringBeihang UniversityBeijing 102206China National Key Laboratory of Science and Technology School of Energy and Power EngineeringBeihang UniversityBeijing 102206China

The spray characteristics of different regions downstream of swirl cups play a critical role in cold start and re-ignition of gas *** spray measurements were performed at the fuel pressures of 0.5,0.8,1.0,1.5,and 2.0 MPa and the fuel temperatures of-23,-13,-3,7,17 and 27℃,*** droplet size,droplet velocity,droplet number,and instantaneous spatial spray image of sprays from an aviation kerosene Jet-A were measured using a two-component phase Doppler particle analyzer and a digital off-axis holography *** the fuel pressure and temperature increase,the Sauter Mean Diameter(SMD)and spray non-uniformity of the Spray Shear Layer(SSL)gradually *** the fuel pressure increases,the SMD and spray non-uniformity of the Central Toroidal Recirculation Zone(CTRZ)gradually decrease,and the slopes of these curves both *** the fuel pressure increases,the SMD and spray nonuniformity of the CTRZ rapidly decrease at the fuel temperature of23℃,while slightly decrease at the fuel temperature of 27℃.The droplets in the CTRZ come from 3 different sources:simplex nozzle,venturi,and outside the *** the fuel pressure increases,the proportion of droplets recirculated from outside the CTRZ *** study proposed the concept of the“pressure critical point”for the swirl *** the fuel temperature decreases,the proportion of droplets recirculated from outside the CTRZ increases below the critical pressure,while decreases above the critical *** addition,through the models of liquid film formation and breakup on the curved cylindrical wall,a semi-theoretical model was established to predict the SMD of SSL for swirl *** prediction uncertainty of this model is less than 6%for all 14 conditions in this paper.

关键词： Swirl cup Sauter Mean Diameter(SMD) Spray non-uniformity Atomizing regions Semi-theoretical prediction Spray nozzles

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Design and Implementation of a Fish Disease Diagnosis Knowledge Ontology Model

Design and Implementation of a Fish Disease Diagnosis Knowle...

引用

亚洲精细农业与计算机农业应用联合大会

作者： WEN GAO1, HUI FAN1,yong-QIANG wang1, XIANG-HONG CUI1, AND ZE- TIAN FU2 ( 1ShanDong Institute of Business and Technology, YanTai, 264005, CHINA 2China Agriculture University, Beijing, 100083, CHINA )

The application of ontology technology in expert systems can improve the maintainability, share ability, and extensibility of knowledge base. However, few studies have shown that it is referred to as a kind of operable criterion and paradigms to ontology design in expert system. This paper proposed the systematic methods for ontology modeling in expert system via the construction of the ontology prototype of Fish Disease Diagnosis Knowledge, guided by the method of modeling axioms. The modeling was also established by designing and combining OWL with Protégé. This model provided a reference for design and evolution of the ontology of diagnostic expert knowledge.

关键词： ontology ontology language ontology design tool fish disease diagnosis knowledge model

来源： cnki会议评论

在线全文

cnki会议

学校读者我要写书评

暂无评论

Mold breakout prediction based on computer vision and machine learning

引用

Journal of Iron and Steel Research International 2024年第8期31卷 1947-1959页

作者： Yan-yu wang Qi-can wang yong-chang Zhang yong-hui Cheng Man Yao Xu-dong wang School of Materials Science and Engineering Dalian University of TechnologyDalian 116024LiaoningChina Key Laboratory of Solidification Control and Digital Preparation Technology Dalian University of TechnologyDalian 116024LiaoningChina

Breakout is the most serious production accident in continuous casting and must be detected and predicted by stable and reliable *** sticking region,which forms on the local copper plate and expanded into a"V"shape,is the typical precursor of ***,computer vision technology was exploited to visualize the temperature change rate of the copper plate based on the temperature signals from thermocouples;then,the static and dynamic features of the abnormal sticking region were ***,logistic regression and Adaboost models were used to study and identify these features,resulting in the development of a mold breakout prediction model based on computer vision and machine *** test results demonstrate that the proposed model can effectively distinguish anomalous temperature patterns and considerably reduce false alarms without any missing *** a result,the proposed method could offer valuable insights into the realm of abnormality detection and prediction during continuous casting process.

关键词： Abnormality detection Image processing Adaboost Logistic regression Continuous casting

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Effect of hafnium and molybdenum addition on inclusion characteristics in Co-based dual-phase high-entropy alloys

引用

International Journal of Minerals,Metallurgy and Materials 2024年第7期31卷 1639-1650页

作者： yong wang Wei wang Joo Hyun Park wangzhong Mu Key Laboratory for Ferrous Metallurgy and Resources Utilization of Ministry of Education&Hubei Provincial Key Laboratory for New Processes of Ironmaking and Steelmaking Wuhan University of Science and TechnologyWuhan 430081China Department of Materials Science and Engineering KTH Royal Institute of TechnologySE-10044StockholmSweden Department of Chemical Engineering Northeast Electric Power UniversityJilin 132012China Department of Materials Science and Chemical Engineering Hanyang UniversityAnsan 15588Korea Engineering Materials Division of Materials ScienceDepartment of Engineering Science and MathematicsLuleå University of Technology97187 LuleåSweden

Specific grades of high-entropy alloys(HEAs)can provide opportunities for optimizing properties toward high-temperature *** this work,the Co-based HEA with a chemical composition of Co_(47.5)Cr_(30)Fe_(7.5)Mn_(7.5)Ni_(7.5)(at%)was *** refractory metallic elements hafnium(Hf)and molybdenum(Mo)were added in small amounts(1.5at%)because of their well-known positive effects on high-temperature *** characteristics were comprehensively explored by using a two-dimensional cross-sectional method and extracted by using a three-dimensional electrolytic extraction *** results revealed that the addition of Hf can reduce Al_(2)O_(3)inclusions and lead to the formation of more stable Hf-rich inclusions as the main *** addition cannot influence the inclusion type but could influence the inclusion characteristics by affecting the physical parameters of the HEA *** calculated coagulation coefficient and collision rate of Al_(2)O_(3)inclusions were higher than those of HfO_(2)inclusions,but the inclusion amount played a larger role in the agglomeration behavior of HfO_(2)and Al_(2)O_(3)*** impurity level and active elements in HEAs were the crucial factors affecting inclusion formation.

关键词： high-entropy alloy non-metallic inclusion agglomeration thermodynamics alloying

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Novel method for extraction of ship target with overlaps in SAR image via EM algorithm

引用

Journal of Systems Engineering and Electronics 2024年第4期35卷 874-887页

作者： CAO Rui wang yong School of Electronics and Information Engineering Harbin Institute of TechnologyHarbin 150001China

The quality of synthetic aperture radar(SAR)image degrades in the case of multiple imaging projection planes(IPPs)and multiple overlapping ship targets,and then the performance of target classification and recognition can be *** addressing this issue,a method for extracting ship targets with overlaps via the expectation maximization(EM)algorithm is ***,the scatterers of ship targets are obtained via the target detection ***,the EM algorithm is applied to extract the scatterers of a single ship target with a single ***,a novel image amplitude estimation approach is pro-posed,with which the radar image of a single target with a sin-gle IPP can be *** proposed method can accom-plish IPP selection and targets separation in the image domain,which can improve the image quality and reserve the target information most *** of simulated and real mea-sured data demonstrate the effectiveness of the proposed method.

关键词： expectation maximization(EM)algorithm image processing imaging projection plane(IPP) overlapping ship tar-get synthetic aperture radar(SAR)

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Energy modeling and optimization of building condenser water systems with all-variable speed pumps and tower fans:A case study

引用

Building Simulation 2024年第7期17卷 1085-1111页

作者： yong Cao Chuang wang Sheng wang Xiao Fu Xinguo Ming School of Mechanical Engineering Shanghai Jiao Tong UniversityShanghai 200240China State Key Laboratory of Air-Conditioning Equipment and System Energy Conservation Zhuhai 519070China GREE Electric Appliances Inc.of ZhuhaiZhuhai 519070China School of Environment and Energy Engineering Beijing University of Civil Engineering and ArchitectureBeijing 100044China Beijing Advanced Innovation Centerfor Future Urban Design Beijing University of Civil Engineering and ArchitectureBeijing 100044China

The emergence of building condenser water systems with all-variable speed pumps and tower fans allows for increased efficiency and flexibility of chiller plants in partial load operation but also increases the control complexity of condenser water *** study aims to develop an integrated modeling technique for evaluating and optimizing the energy performance of such a condenser water *** proposed system model is based on the semi-physical semi-empirical chiller,pump,and cooling tower models,with capabilities of fully considering the hydraulic and thermal interactions in the condenser water loop,being solved analytically and much faster than iterative solvers and supporting the explicit optimization of the pump and tower fan frequency.A mathematical approach,based on the system model and constrained optimization technique,is subsequently established to evaluate the energy performance of a typical dual setpoint-based variable speed strategy and find its energy-saving potential and most efficient operation by jointly optimizing pumps and tower *** all-variable speed chiller plant from Wuhan,China,is used for a case study to validate the system model’s accuracy and explore its *** results showed that the system model can accurately simulate the condenser water system’s performance under various operating *** optimizing the frequencies of pumps and tower fans,the total system energy consumption can be reduced by 12%–13%compared to the fixed dual setpoint-based strategy with range and approach setpoints of 4℃and 2℃.In contrast,the energy-saving potential of optimizing the cooling tower sequencing is insignificant.A simple joint speed control method for optimizing the pumps and tower fans emerged,i.e.,the optimal pump and fan frequency are linearly correlated(if both are non-extremes)and depend on the chiller part load ratio only,irrespective of the ambient wet-bulb temperature and chilled water supply *** was also foun

关键词： all-variable speed chiller plant model-based optimization hydraulic and thermal coupling analytical solution dual setpoint-based variable speed control optimal joint speed control

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：