检索结果-南通市图书馆

A Displacement Based Analytical Model to Determine Residual Stress Components in a Finite Elastic Thin Plate with Hole-Drilling Method

在线全文

学校读者我要写书评

暂无评论

Journal of Applied Mathematics and Physics 2018年第8期6卷 1571-1580页

作者： Yuming Li Boussad Abbes Fazilay Abbes yingqiao guo Xiaolu Gong Lab. GRESPI/Mécanique Université de Reims Champagne-Ardenne Reims France Université de Technologie de Troyes Troyes France

In order to measure the residual stress components in an elastic thin plate, the hole-drilling strain-gage method has been used. This method enables to determine the relation between the magnitudes and directions of the principal stresses and the strain relaxation about the hole. In the existing analytical models based on stress field, the formulations associated with the hole-drilling method are based on the assumption of an infinite plate, this may cause some errors for a finite plate and it’s difficult to validate these solutions by FE methods. Furthermore, in the composite, the displacement field is continuous but the stress field is not necessarily continuous, the displacement field based method has to be used. In the present paper an analyt-ical model based on a displacement field described by a function with coefficients to determine for a finite round thin plate is presented. The coefficients used in the displacement field are independent on the three residual stress components, and they are determined by minimization of the internal strain energy during the hole-drilling process. Once the coefficients in the dis-placement field are determined, three strains measured in three radial directions are utilized to determine the three residual stress components. The proposed analytical model can be also adapted to infinite plate by assuming that the diameter of the round plate tends to infinite.

关键词： Residual Stress Hold Drilling Displacement Based Internal Strain Energy Analytical Model

AZ91D镁合金表面激光熔覆Al+WC+La_2O_3复合涂层性能的研究

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

电焊机 2017年第1期47卷 31-34页

作者：刘盛耀张英乔郭昱中北大学材料科学与工程学院山西太原030051

在Al+WC复合粉末中添加不同量的La_2O_3,利用激光形成熔覆层。采用金相显微镜、扫描电子显微镜(SEM)、X射线衍射仪(XRD)、能谱仪(EDS)分析不同含量的稀土La_2O_3对涂层的显微组织、物相组成及性能影响。研究表明,由于稀土的加入,复合涂... 详细信息

在Al+WC复合粉末中添加不同量的La_2O_3,利用激光形成熔覆层。采用金相显微镜、扫描电子显微镜(SEM)、X射线衍射仪(XRD)、能谱仪(EDS)分析不同含量的稀土La_2O_3对涂层的显微组织、物相组成及性能影响。研究表明,由于稀土的加入,复合涂层的晶粒进一步细化。当稀土含量为1.2%时涂层的平均显微硬度为280 HV,相比AZ91D镁合金基体的60 HV提高了约4.5倍。

关键词：激光熔覆 Al+WC La_2O_3 显微硬度

Effect of Nb-V microalloying on the hot deformation behavior of medium Mn steels

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2025年第2期32卷 360-368页

作者： Yumeng Wang Qinyi guo Bin Hu Haiwen Luo School of Metallurgical and Ecological Engineering University of Science and Technology BeijingBeijing 100083China

The influence of Nb-V microalloying on the hot deformation behavior and microstructures of medium Mn steel(MMS)was investigated by uniaxial hot compression *** establishing the constitutive equations for simulating the measured flow curves,we successfully constructed deformation activation energy(Q)maps and processing maps for identifying the region of flow *** concluded the following consequences of Nb-V alloying for MMS.(i)The critical strain increases and the increment diminishes with the increasing deformation temperature,suggesting that NbC precipitates more efficiently retard dynamic recrystallization(DRX)in MMS compared with solute Nb.(ii)The deformation activation energy of MMS is significantly increased and even higher than that of some reported high Mn steels,suggesting that its ability to retard DRX is greater than that of the high Mn content.(iii)The hot workability of MMS is improved by narrowing the hot processing window for the unstable flow stress,in which fine recrystallized and coarse unrecrystallized grains are present.

关键词： medium manganese steel niobium-vanadium microalloying flow behavior dynamic recrystallization hot workability

Rock fracture mechanism of buffer blasting with cushion layer at the borehole bottom

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2025年第2期32卷 325-334页

作者： Xinguang Zhu Chenxi Ding Zhe Sui Hong Su Xu guo School of Civil and Resources Engineering University of Science and Technology BeijingBeijing 100083China Key Laboratory for Mechanics in Fluid Solid Coupling Systems Institute of MechanicsChinese Academy of SciencesBeijing 100190China School of Mechanics and Civil Engineering China University of Mining and Technology(Beijing)Beijing 100083China School of Chemical and Blasting Engineering Anhui University of Science and TechnologyHuainan 232001China

This study primarily investigates the rock fracture mechanism of bottom cushion layer blasting and explores the effects of the bottom cushion layer on rock *** involves analyses of the evolution patterns of blasting stress,characteristics of crack distribution,and rock fracture features in the ***,blasting model experiments were carried out using the dynamic caustics principle to investigate the influence of bottom cushion layers and initiation methods on the integrity of the bottom rock *** experimental results indicate that the combined use of bottom cushion layers and inverse initiation effectively protects the integrity of the bottom rock ***,the process of stress wave propagation and dynamic crack propagation in rocks was simulated using the continuum-discontinuum element method(CDEM)and the Landau explosion source model,with varying thicknesses of bottom cushion *** numerical simulation results indicate that with increasing cushion thickness,the absorption of energy generated by the explosion becomes more pronounced,resulting in fewer cracks in the bottom rock *** illustrates the positive role of the cushion layer in protecting the integrity of the bottom rock mass.

关键词： bottom cushion layer blasting crack propagation continuum-discontinuum element method dynamic stress intensity factor

Reducing the measurement errors in nonadiabatic holonomic quantum computers

在线全文

学校读者我要写书评

暂无评论

Science China(Physics,Mechanics & Astronomy) 2025年第1期Mechanics & Astronomy) .卷 64-70页

作者： guo-Fu Xu Department of Physics Shandong University

Nonadiabatic holonomic quantum computers serve as the physical platform for nonadiabatic holonomic quantum *** quantum computation has entered the noisy intermediate-scale era, building accurate intermediate-scale nonadiabatic holonomic quantum computers is clearly necessary. Given that measurements are the sole means of extracting information, they play an indispensable role in nonadiabatic holonomic quantum computers. Accordingly, developing methods to reduce measurement errors in nonadiabatic holonomic quantum computers is of great importance. However, while much attention has been given to the research on nonadiabatic holonomic gates, the research on reducing measurement errors in nonadiabatic holonomic quantum computers is severely lacking. In this study, we propose a measurement error reduction method tailored for intermediate-scale nonadiabatic holonomic quantum computers. The reason we say this is because our method can not only reduce the measurement errors in the computer but also be useful in mitigating errors originating from nonadiabatic holonomic gates. Given these features,our method significantly advances the construction of accurate intermediate-scale nonadiabatic holonomic quantum computers.

关键词： quantum holonomy quantum computation measurement errors

Microstructural evolution during the progressive transformation-induced plasticity effect in a Fe-0.1C-5Mnmedium manganese steel

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2025年第2期32卷 369-379页

作者： Mei Zhang Wenhao Li Yangfei Chen Yang Jiang Xiaofei guo Han Dong School of Materials Science and Engineering Shanghai UniversityShanghai 200444China State Key Laboratory of Advanced Special Steel Shanghai UniversityShanghai 200444China

The microstructural evolution of a cold-rolled and intercritical annealed medium-Mn steel(Fe-0.10C-5Mn)was investigated during uniaxial tensile ***-situ observations under scanning electron microscopy,transmission electron microscopy,and X-ray diffraction analysis were conducted to characterize the progressive transformation-induced plasticity process and associated fracture initiation *** findings were discussed with the local strain measurements via digital image *** results indicated that Lüders band formation in the steel was limited to 1.5%strain,which was mainly due to the early-stage martensitic phase transformation of a very small amount of the less stable large-sized retained austenite(RA),which led to localized stress concentrations and strain hardening and further retardation of *** small-sized RA exhibited high stability and progressively transformed into martensite and contributed to a stably extended Portevin-Le Chatelier *** volume fraction of RA gradually decreased from 26.8%to 8.2%prior to *** the late deformation stage,fracture initiation primarily occurred at the austenite/martensite and ferrite/martensite interfaces and the ferrite phase.

关键词： medium-Mn steel retained austenite progressive transformation-induced plasticity effect local strain fracture initiation

Unraveling the significance of cobalt on transformation kinetics,crystallography and impact toughness in high-strength steels

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2025年第2期32卷 380-390页

作者： Yishuang Yu Jingxiao Zhao Xuelin Wang Hui guo Zhenjia Xie Chengjia Shang Collaborative Innovation Center of Steel Technology University of Science and Technology BeijingBeijing 100083China School of Materials Science and Engineering Shanghai Jiao Tong UniversityShanghai 200240China State Key Laboratory for Advanced Metals and Materials University of Science and Technology BeijingBeijing 100083China

This work reveals the significant effects of cobalt(Co)on the microstructure and impact toughness of as-quenched highstrength steels by experimental characterizations and thermo-kinetic *** results show that the Co-bearing steel exhibits finer blocks and a lower ductile-brittle transition temperature than the steel without ***,the Co-bearing steel reveals higher transformation rates at the intermediate stage with bainite volume fraction ranging from around 0.1 to *** improved impact toughness of the Co-bearing steel results from the higher dense block boundaries dominated by the V1/V2 variant ***,the addition of Co induces a larger transformation driving force and a lower bainite start temperature(BS),thereby contributing to the refinement of blocks and the increase of the V1/V2 variant *** findings would be instructive for the composition,microstructure design,and property optimization of high-strength steels.

关键词： high-strength steel cobalt transformation kinetics crystallography impact toughness

Bandgap characteristics analysis and graded design of a novel metamaterial for flexural wave suppression

在线全文

学校读者我要写书评

暂无评论

Applied Mathematics and Mechanics(English Edition) 2025年第1期46卷 1-24页

作者： Fan YANG Zhaoyang MA Xingming guo Shanghai Key Laboratory of Mechanics in Energy Engineering Shanghai Institute of Applied Mathematics and Mechanics School of Mechanics and Engineering ScienceShanghai University Shanghai Institute of Aircraft Mechanics and Control

A novel elastic metamaterial is proposed with the aim of achieving lowfrequency broad bandgaps and bandgap regulation. The band structure of the proposed metamaterial is calculated based on the Floquet-Bloch theorem, and the boundary modes of each bandgap are analyzed to understand the effects of each component of the unit cell on the bandgap formation. It is found that the metamaterials with a low elastic modulus of ligaments can generate flexural wave bandgaps below 300 Hz. Multi-frequency vibrations can be suppressed through the selective manipulation of bandgaps. The dual-graded design of metamaterials that can significantly improve the bandgap width is proposed based on parametric studies. A new way that can regulate the bandgap is revealed by studying the graded elastic modulus in the substrate. The results demonstrate that the nonlinear gradient of the elastic modulus in the substrate offers better bandgap performance. Based on these analyses, the proposed elastic metamaterials can pave the way for multi-frequency vibration control, low-frequency bandgap broadening, and bandgap tuning.

关键词：

Asking one mechanism in glial cells during neuroinflammation

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Neural Regeneration Research 2025年第4期20卷 1077-1078页

作者： Xiaoli guo Chikako Harada Takayuki Harada Visual Research Project Tokyo Metropolitan Institute of Medical ScienceTokyoJapan

Multiple sclerosis(MS),which is characterized by inflammatory demyelination in the central nervous system(CNS),is the most common neurological disease in the young adult *** autoimmune encephalomyelitis(EAE),an animal model of MS,is often used in preclinical *** data indicate that in addition to immune cells such as T cells and dendritic cells,CNS resident microglia and astrocytes play important roles in demyelinating neuroinflammation(Healy et al.,2022).In particular,microglia are key immune-competent cells that can respond to environmental *** depletion of transforming growth factor-β-activated kinase 1,a mitogen-associated protein kinase kinase kinase,in microglia is reported to reduce CNS inflammation and diminish axonal and myelin damage *** suggests that elucidating the mechanisms of microglia-specific responses during pathologies may help in the development of treatments that reduce EAE/MS disease severity(Goldmann et al.,2013).

关键词： inflammation clinical