检索结果-南通市图书馆

Mechanical behaviour of fiber-reinforced grout in rock bolt reinforcement

在线全文

学校读者我要写书评

暂无评论

Journal of Rock Mechanics and Geotechnical Engineering 2024年第2期16卷 437-453页

作者： yingchun Li Ammar Ahmed Danqi Li Deep Underground Engineering Research Center Dalian University of TechnologyDalian116024China WA School of Mines:Minerals Energy and Chemical Engineering Curtin UniversityKalgoorlieWA6430Australia

Grouted rock bolts subject to axial loading in the field exhibit various failure modes,among which the most predominant one is the bolt-grout interface ***,mechanical characterization of the grout is essential for understanding its performance in ground *** date,few studies have been conducted to characterize the mechanical behaviour of fiber-reinforced grout(FRG)in rock bolt *** we experimentally studied the mechanical behaviour of FRG under uniaxial compression,indirect tension,and direct shear loading *** also conducted a series of pullout tests of rebar bolt encapsulated with different grouts including conventional cementitious grout and *** was developed using 1.%silica fume(SF)replacement of cement(by weight)and steel fiber to achieve highstrength and crack-resistance to overcome drawbacks of the conventional *** types of steel fibers including straight and wavy steel fibers were further added to enhance the grout *** effect of fiber shape and fiber volume proportion on the grout mechanical properties were *** experimental results showed that the addition of SF and steel fiber by 1.5%fiber volume proportion could lead to the highest compressive,tensile,and shear strengths of the *** minimum volume of fiber that could improve the mechanical properties of grout was found at 0.5%.The scanning electron microscopy(SEM)analysis demonstrated that steel fibers act as an excellent bridge to prevent the cracks from propagating at the interfacial region and hence to aid in maintaining the integrity of the cementitious *** laboratory pullout tests further confirmed that FRG could prevent the cylindrical grout annulus from radial crack and hence improve the rebar’s load carrying ***,FRG has a potential to be utilized in civil and mining applications where high-strength and crack-resistance support is required.

关键词： Fiber-reinforced grout(FRG) Steel fibers Mechanical properties Direct shear test Pullout test

Towards high-strength cold spray additive manufactured metals:Methods,mechanisms,and properties

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2024年第3期170卷 47-64页

作者： Shuo Yin Ningsong Fan Chunjie Huang yingchun Xie Chao Zhang Rocco Lupoi Wenya Li Department of Mechanical Manufacturing&Biomedical EngineeringParsons BuildingTrinity College DublinThe University of DublinDublin 2Ireland Institute of Materials Technology Helmut-Schmidt-University/University of the Federal Armed Forces HamburgHamburg 22043Germany The Key Lab of Guangdong for Modern Surface Engineering Technology National Engineering Laboratory for Modern Materials Surface Engineering TechnologyInstitute of New MaterialsGuangdong Academy of SciencesGuangzhou 510651China College of Mechanical Engineering Yangzhou UniversityYangzhou 225127China State Key Laboratory of Solidification Processing Shaanxi Key Laboratory of Friction Welding TechnologiesNorthwestern Polytechnical UniversityXi’an 720072China

Cold spray,as a solid-state additive manufacturing process,has been attracting increasing attention from both scientific and industrial ***,cold-sprayed deposits generally have unfavorable mechanical properties in their as-fabricated state compared to conventionally manufactured and fusion-based additive-manufactured counterparts due to the inherent microstructural defects in the deposits(e.g.,porosity and incomplete interparticle bonding).This downside reduces its competitiveness and limits its wide applications as an additive manufacturing *** the past years,many strengthening technologies have been developed or introduced to adjust the microstructure and improve the mechanical properties of cold-sprayed *** term“strengthening”in this work specifically refers to improving the mechanical strength,particularly the tensile strength of the cold-sprayed bulk *** to the stage that the strengthening technologies are used in the cold spray process,they can be classified into three categories:pre-process(e.g.,powder heat treatment),in-process(e.g.,powder heating,in-situ micro-forging,laser-assisted cold spray),and post-process(e.g.,post heat treatment,hot isostatic pressing,hot rolling,friction stir processing).Therefore,a comprehensive review of these strengthening technolo-gies is conducted to illuminate the possible correlations between the strengthening mechanisms and the resultant deposit microstructures and mechanical *** review paper aims to help researchers and engineers well understand the different strengthening methods and provide guidance for the cold spray community to develop new strengthening strategies for future high-quality mass production.

关键词： Cold spray Additive manufacturing Strengthening Microstructure Ductility Tensile strength

Effect of Shape and Placement of Twisted Pin Fins in a Rectangular Channel on Thermo-Hydraulic Performance

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Thermal Science 2024年第5期33卷 1773-1793页

作者： LI Yong ZHANG Jin ZHANG yingchun ZHANG Jiajie MA Suxia SUNDEN Bengt XIE Gongnan College of Electrical and Power Engineering Taiyuan University of TechnologyTaiyuan 030024China Key Laboratory of Cleaner Intelligent Control on Coal&Electricity Ministry of EducationTaiyuan 030024China Shanxi Provincial Key Laboratory of High Efficiency Heat Storage and Low Carbon Heat Supply Taiyuan 030008China School of Energy and Power Engineering North University of ChinaTaiyuan 030051China Department of Energy Sciences Lund UniversityP.O.Box 118Lund SE 22100Sweden School of Marine Science and Technology Northwestern Polytechnical UniversityXi'an 710072China

To enhance the thermo-hydraulic performance of cooling channels,this investigation examines the influence of distinct cross-sectional shapes(i.e.,triangular,rectangular,and hexagonal)of twisted pin fins and their arrangements in straight and cross *** ambient air cooling test platform was established to numerically and experimentally investigate the flow and heat transfer characteristics of 360°twisted pin fins at Re=*** findings reveal that straight rows exhibit higher Nu values than cross rows for triangular and rectangular twisted pin fins,and Nu increases with *** contrast,for hexagonal twisted pin fins,only straight rows at Re=1.000 exhibit superior overall thermal performance compared to cross ***,the heat transfer performance of the cooling channel with hexagonal twisted fins surpasses both triangular and rectangular configurations,especially at high Reynolds numbers(Re=22800).Although the heat transfer coefficient of the cooling channel with hexagonal twisted fins is significantly enhanced by 1.2.71.compared to the flat channel,it also exhibits the highest thermal resistance and relative friction among the three types of twisted fins,the maximum of which are 2.1. and ***,the hydrothermal performance factor(HTPF)of the cooling channels with different types of twisted pin fins depends on the Reynolds number and arrangement *** Re=1.200,the highest HTPF achieved for the cross-row hexagonal twisted pin fins is 0.99.

关键词： twisted pin fin cross arrangement heat transfer pressure drop HTPF

An all-in-one FeO_(x)-rGO sponge fabricated by solid-phase microwave thermal shock for water evaporation and purification

在线全文

学校读者我要写书评

暂无评论

Journal of Environmental Sciences 2024年第4期138卷 671-683页

作者： Youkun Sun Xiuwen Zhao Xueling Song Jinchen Fan Junhe Yang yingchun Miao Shuning Xiao School of Materials and Chemistry University of Shanghai for Science and TechnologyShanghai 200093China College of Chemistry and Environmental Science Qujing Normal UniversityQujing 655011China Prytula Igor Collaborate Innovation Center for Diamond Shanghai Jian Qiao UniversityShanghai 201306China

Developing high-efficiency photothermal seawater desalination devices is of significant importance in addressing the shortage of *** much effort made into photothermal materials,there is an urgent need to design a rapidly synthesized photothermal evaporator for the comprehensive purification of complex ***,we report on all-in-one FeOx-rGO photothermal sponges synthesized via solid-phase microwave thermal *** narrow band gap of the semiconductor material Fe_(3)O_(4) greatly reduces the recombination of electron-hole pairs,enhancing non-radiative relaxation light *** abundantπorbitals in rGO promote electron excitation and thermal vibration between the *** of the surface hydrophilicity and hydrophobicity promotes salt resistance while simultaneously achieving the purification of various complex polluted *** optimized GFM-3 sponge exhibitedan enhanced photothermal conversion rate of 97.3% and a water evaporation rate of 2.04 kg/(m^(2)·hr),showing promising synergistic water purification *** findings provide a highly efficient photothermal sponge for practical applicationsof seawater desalination and purification,as well as develop a super-rapid processing methodology for evaporation devices.

关键词： Desalination Photothermal device Microwave synthesis Water purification FeO_(x)-rGO

介孔二氧化硅载体对蛋白药物载药释药及提高酶降解稳定性的初步研究

在线全文

学校读者我要写书评

暂无评论

沈阳药科大学学报 2018年第4期35卷 259-264页

作者：栾嘉瑶高亦鲲王梦洋刘迎春沈阳药科大学制药工程学院辽宁沈阳110016 沈阳药科大学医疗器械学院辽宁沈阳110016 沈阳药科大学药学院辽宁沈阳110016

目的根据模型蛋白的空间尺寸设计介孔二氧化硅载体,初步探索不同孔径载体对蛋白药物载药、释药及稳定性的保护作用。方法以表面活性剂P1.3为胶束模板,以正硅酸乙酯为硅源,制备介孔二氧化硅,利用透射电镜、氮气吸附-脱附等手段表征载体;... 详细信息

目的根据模型蛋白的空间尺寸设计介孔二氧化硅载体,初步探索不同孔径载体对蛋白药物载药、释药及稳定性的保护作用。方法以表面活性剂P1.3为胶束模板,以正硅酸乙酯为硅源,制备介孔二氧化硅,利用透射电镜、氮气吸附-脱附等手段表征载体;以溶菌酶(lysozyme,LYS)和牛血清白蛋白(bovine serum albumin,BSA)为模型蛋白,采用SDS-PAGE电泳分析测定不同孔径载体对LYS和BSA酶降解的保护程度。结果制备出三种孔径(7、1.、22 nm)介孔二氧化硅载体,三种载体对LYS和BSA的载药量均为40%左右,LYS和BSA在三种载体中的总释放度均随孔径的减小而减小,7 nm和1. nm载体分别对LYS和BSA的保护作用最强。结论介孔二氧化硅可用于高效装载蛋白药物并提高其稳定性,载体孔径尺寸越接近蛋白药物的大小,对其保护作用越强。

关键词：介孔二氧化硅溶菌酶牛血清白蛋白稳定性

First-principles study of the relationship between the formation of single atom catalysts and lattice thermal conductivity

在线全文

学校读者我要写书评

暂无评论

Chinese Chemical Letters 2024年第6期35卷 502-506页

作者： Chaozheng He Pei Shi Donglin Pang Zhanying Zhang Long Lin yingchun Ding Department of Chemistry and Chemical Engineering Liaocheng UniversityLiaocheng 252059China Henan Key Laboratory of Materials on Deep-Earth Engineering School of Materials Science and EngineeringHenan Polytechnic UniversityJiaozuo 454000China School of Materials Science and Engineering Henan Polytechnic UniversityJiaozuo 454000China Department of Basic Medicine North Sichuan Medical CollegeNanchong 637000China

Single atom catalysts(SACs)have been in the forefront of catalysts research because of their high efficiency and low cost and provide new ideas for development of renewable energy conversion and storage ***,the relationship between the intrinsic properties of materials such as lattice thermal conductivity and catalysis remains to be *** this work,the lattice thermal conductivity of BN and graphene was calculated by Sheng *** addition,the adsorption properties of 3d-TM(TM=V,Cr,Mn,Fe,Co,Ni)on BN and graphene were investigated using first-principles methods,and it was found that Ni atom can form relatively stable SACs compared to other *** molecular dynamics(MD)simulation and migration barrier of Ni loaded on BN and graphene were *** study found that graphene has higher thermal conductivity and is easier to form SACs than BN,but the SACs formed on BN surface have higher thermodynamic stability.

关键词： First-principles calculation Thermal conductivity Single atom catalysts Graphene BN

Engineering hierarchical quaternary superstructure of an integrated MOF-derived electrode for boosting urea electrooxidation assisted water electrolysis

在线全文

学校读者我要写书评

暂无评论

Green Energy & Environment 2024年第4期9卷 695-701页

作者： Jianjun Tian Changsheng Cao yingchun He Muhammad Imran Khan Xin-Tao Wu Qi-Long Zhu State Key Laboratory of Structural Chemistry Fujian Institute of Research on the Structure of MatterChinese Academy of Sciences(CAS)Fuzhou350002China Fujian Science&Technology Innovation Laboratory for Optoelectronic Information of China Fuzhou350108China University of Chinese Academy of Sciences Beijing100049China Research Institute of Sciences and Engineering(RISE) University of SharjahSharjah27272United Arab Emirates

Controllable design of the catalytic electrodes with hierarchical superstructures is expected to improve their electrochemical ***,a self-supported integrated electrode(NiCo-ZLDH/NF)with a unique hierarchical quaternary superstructure was fabricated through a self-sacrificing template strategy from the metal–organic framework(Co-ZIF-67)nanoplate arrays,which features an intriguing well-defined hierarchy when taking the unit cells of the NiCo-based layered double hydroxide(NiCo-LDH)as the primary structure,the ultrathin LDH nanoneedles as the secondary structure,the mesoscale hollow plates of the LDH nanoneedle arrays as the tertiary structure,and the macroscale three-dimensional frames of the plate arrays as the quaternary ***,the distinctive structure of NiCo-ZLDH/NF can not only accelerate both mass and charge transfer,but also expose plentiful accessible active sites with high intrinsic activity,endowing it with an excellent electrochemical performance for urea oxidation reaction(UOR).Specially,it only required the low potentials of 1.335,1.368 and 1.388 V to deliver the current densities of 1.,1.0 and 200 mA cm^(-2),respectively,much superior to those for typical *** NiCo-ZLDH/NF as the bifunctional electrode for both anodic UOR and cathodic HER,an energy-saving electrolysis system was further explored which can greatly reduce the needed voltage of 21. mV to deliver the current density of 1.0 mA cm^(-2),as compared to the conventional water electrolysis system composed of *** work manifests that it is prospective to explore the hierarchically nanostructured electrodes and the innovative electrolytic technologies for high-efficiency electrocatalysis.

关键词： Hierarchical superstructures Metal–organic frameworks Layered double hydroxides Urea oxidation reaction Hydrogen evolution reaction

Linkages among leaf nutrient concentration,resorption efficiency, litter decomposition and their stoichiometry to canopy nitrogen addition and understory removal in subtropical plantation

在线全文

学校读者我要写书评

暂无评论

Ecological Processes 2024年第02期13卷 90-102页

作者： Jawad Ali Shah Wenfei Liu Saif Ullah Honglang Duan Fangfang Shen yingchun Liao Guomin Huang Jianping Wu Ministry of Education Key Laboratory for Transboundary Ecosecurity of Southwest China Yunnan Key Laboratory of Plant Reproductive Adaptation and Evolutionary Ecology and Institute of Biodiversity School of Ecology and Environmental Science Yunnan University Laboratory of Soil Ecology and Health in Universities of Yunnan Province Yunnan University Jiangxi Key Laboratory for Restoration of Degraded Ecosystems & Watershed Ecohydrology Nanchang Institute of Technology Key Laboratory of Forest Cultivation in Plateau Mountain of Guizhou Province Institute for Forest Resources and Environment of Guizhou College of ForestryGuizhou University

Background The prevalence of understory removal and anthropogenic nitrogen(N) deposition has significantly altered the ecological processes of forest ecosystems at both regional and global scales. However, it remains a pressing challenge to understand how N deposition and understory removal affect leaf nutrient dynamics, nutrient resorption, litter decomposition, and their linkages for better managing forest ecosystems under nutrient imbalances induced by N enrichment. To address this research gap, a field manipulation experiment was carried out in a subtropical Cunninghamia lanceolata plantation with four treatments including: control(CK), canopy N addition(CN), understory removal(UR), and canopy N addition plus understory removal(CN × UR). Green and senesced leaf N and phosphorus(P) concentrations, N and P resorption efficiencies, litter decomposition, and their correlations were *** The results revealed that the average N concentrations of green early and late leaves in UR were increased by 6.61.and 1..89% compared to CK. UR had the highest whereas CN had the lowest P concentrations in green leaves across the two sampling seasons. Following this, UR, leaf type, season, and their interactions significantly affected leaf N, P, and N:P(P 1. relative to CN. The regression analysis demonstrated that leaf nutrient status was significantly interconnected with leaf nutrient resorption efficiencies. In addition, leaf nutrient dynamics were strongly correlated with litter nutrients, indicating that both were *** These findings can deepen our knowledge of biogeochemical cycling and reveal contrasting nutrientacquisition strategies on N and P limitation in response to UR and CN. Considering the P limitation, it is important to note that P was resorbed more efficiently, illustrating a

关键词： Nutrient resorption Nitrogen deposition Litter decomposition Stoichiometry Understory removal Subtropical plantation

Yttrium‐and nitrogen‐doped NiCo phosphide nanosheets for high‐efficiency water electrolysis

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Carbon Energy 2024年第8期6卷 214-231页

作者： Guangliang Chen Huiyang Xiang yingchun Guo Jun Huang Wei Chen Zhuoyi Chen Tongtong Li Kostya(Ken)Ostrikov Department of Materials Engineering Huzhou UniversityHuzhouChina School of Materials Science and Engineering Zhejiang Sci‐Tech UniversityHangzhouChina School of Physics and Electronic Information Gannan Normal UniversityGanzhouChina School of Chemistry and Physics Centre for Materials ScienceCentre for Clean Energy Technologies and PracticesCentre for Waste−Free WorldQueensland University of Technology(QUT)BrisbaneQueenslandAustralia

Engineering high‐performance and low‐cost bifunctional catalysts for H_(2)(hydrogen evolution reaction[HER])and O_(2)(oxygen evolution reaction[OER])evolution under industrial electrocatalytic conditions remains ***,for the first time,we use the stronger electronegativity of a rare‐Earth yttrium ion(Y^(3+))to induce in situ NiCo‐layered double‐hydroxide nanosheets from NiCo foam(NCF)treated by a dielectric barrier discharge plasma NCF(PNCF),and then obtain nitrogen‐doped YNiCo phosphide(N‐YNiCoP/PNCF)after the phosphating process using radiofrequency plasma in *** obtained NYNiCoP/PNCF has a large specific surface area,rich heterointerfaces,and an optimized electronic structure,inducing high electrocatalytic activity in HER(331.V vs.2000mA cm^(−2))and OER(464mV vs.2000mA cm^(−2))reactions in 1.KOH electrolyte.X‐ray absorption spectroscopy and density functional theory quantum chemistry calculations reveal that the coordination number of CoNi decreased with the incorporation of Y atoms,which induce much shorter bonds of Ni and Co ions and promote long‐term stability of N‐YNiCoP in HER and OER under the simulated industrial ***,the CoN‐YP_(5)heterointerface formed by plasma N‐doping is the active center for overall water *** work expands the applications of rare‐Earth elements in engineering bifunctional electrocatalysts and provides a new avenue for designing highperformance transition‐metal‐based catalysts in the renewable energy field.

关键词： overall water splitting plasma etching plasma N‐doping rare‐earth electrocatalyst yttrium incorporation