检索结果-南通市图书馆

Roughness characterization and shearing dislocation failure for rock-backfill interface

International Journal of Minerals,Metallurgy and Materials 2024年第6期31卷 1167-1176页

作者： Meifeng Cai Zhilou Feng Qifeng Guo Xiong yin minghui Ma Xun Xi Key Laboratory of High-Efficient Mine and Safety of Metal Mines of Ministry of Education Beijing 100083China Key Laboratory of Urban and Underground Space Engineering University of Science and Technology BeijingBeijing 100083China Shandong Gold Group Co LtdJinan 250102China

Shearing dislocation is a common failure type for rock–backfill interfaces because of backfill sedimentation and rock strata movement in backfill mining goaf.This paper designed a test method for rock–backfill shearing dislocation.Using digital image techno-logy and three-dimensional(3D)laser morphology scanning techniques,a set of 3D models with rough joint surfaces was established.Further,the mechanical behavior of rock–backfill shearing dislocation was investigated using a direct shear test.The effects of interface roughness on the shear–displacement curve and failure characteristics of rock–backfill specimens were considered.The 3D fractal dimen-sion,profile line joint roughness coefficient(JRC),profile line two-dimensional fractal dimension,and the surface curvature of the frac-tures were obtained.The correlation characterization of surface roughness was then analyzed,and the shear strength could be measured and calculated using JRC.The results showed the following:there were three failure threshold value points in rock–backfill shearing dis-location:30%–50%displacement before the peak,70%–90%displacement before the peak,and 100%displacement before the peak to post-peak,which could be a sign for rock–backfill shearing dislocation failure.The surface JRC could be used to judge the rock–backfill shearing dislocation failure,including post-peak sliding,uniform variations,and gradient change,corresponding to rock–backfill disloca-tion failure on the field site.The research reveals the damage mechanism for rock–backfill complexes based on the free joint surface,fills the gap of existing shearing theoretical systems for isomerism complexes,and provides a theoretical basis for the prevention and control of possible disasters in backfill mining.

关键词： rock–backfill roughness correlation characterization shearing dislocation interface failure

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Torque Limit-based Inertial Control Method Based on Delayed Support for Primary Frequency Control of Wind Turbines

引用

Journal of Modern Power Systems and Clean Energy 2024年第2期12卷 561-570页

作者： Wei Gu Zaiyu Chen Qun Li minghui yin Qiang Li Yun Zou School of Automation Nanjing University of Science and TechnologyNanjing 210094China State Grid Jiangsu Electric Power Co. Ltd.Research InstituteNanjing 211103China

To avoid the secondary frequency dip caused by the steep drop of the electrical power of wind turbines(WTs)at the end of frequency support stage,the torque limit-based iner-tial control(TLIC)method sets the power reference as a linear function of rotor speed,rather than the step form for the step-wise inertial control.However,the compensation effect on the frequency nadir(FN)caused by the load surge is weakened as the TLIC power is no longer in the step form.Specifically,the maximum point of the frequency response component(FRC)contributed by TLIC occurs earlier than the minimum point of FRC corresponding to the load surge,so that the FN cannot be adequately raised.Therefore,this paper first investigates the relation between the peak and nadir times of FRCs stimulated by the TLIC and load power.On this basis,with the compensation principle of matching the peak and nadir times of FRCs,the improved TLIC method based on delayed support is proposed.Finally,the effectiveness of the proposed method is validated via the experiments on the test bench of wind-integrated power system.

关键词： Wind turbine frequency response component torque limit inertial control delayed support

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Acousto-optic scanning multi-photon lithography with high printing rate

引用

Opto-Electronic Advances 2024年第2期7卷 1-3页

作者： minghui Hong Pen-Tung Sah Institute of Micro-Nano Science and Technology Xiamen UniversityXiamen 361005China

As a manufacturing method that is focused on end-users,3D printing has gained a lot of attention in recent years due to its unique advantages in fabricating complex three-dimensional structures.Various new micro-nano 3D printing methods have been developed to meet the demand for high-precision and high-yield manufacturing1-9.Among them,multi-photon-photon lithography(MPL) is a promising 3D nanofabrication technology due to its capability of true 3D digital processing and nanoscale processing resolution beyond the diffraction limit.It has been widely used to fabricate microoptics10,11,photonic crystals12,microfluidics13,meta-surfaces14,and mechanical metamaterials15.

关键词： photon Acous scanning

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Current status and challenges of pig-to-human organ xenotransplantation

引用

Science China(Life Sciences) 2024年第4期67卷 829-831页

作者： minghui Fang Yong-Guang Yang Zheng Hu Key Laboratory of Organ Regeneration&Transplantation of Ministry of Education and National-Local Joint Engineering Laboratory of Animal Models for Human DiseasesThe First Hospital of Jilin UniversityChangchun 130061China

Organ shortage is a global issue.Data collected by the Global Observatory on Donation and Transplantation reveals that over 150,000 solid organ transplants are conducted globally each year,a 52%increase from 2010(http... 详细信息

关键词： globally global shortage

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Rational construction of CuFe_(2)O_(4)@C/Cd_(0.9)Zn_(0.1)S S-scheme heterojunction photocatalyst for extraordinary photothermal-assisted photocatalytic H_(2) evolution

引用

Journal of Energy Chemistry 2024年第5期92卷 240-249页

作者： Dong Zhang minghui Zhu Ran Qin Peixian Chen Maoye yin Dafeng Zhang Junchang Liu Hengshuai Li Xipeng Pu Peiqing Cai School of Physics Science and Information Technology Shandong Key Laboratory of Optical Communication Science and TechnologyLiaocheng UniversityLiaocheng 252000ShandongChina School of Materials Science and Engineering Shandong Provincial Key Laboratory of Chemical Energy Storage and Novel Cell TechnologyLiaocheng UniversityLiaocheng 252000ShandongChina College of Optical and Electronic Technology China Jiliang UniversityHangzhou 310018ZhejiangChina

Rational design of photocatalyst to maximize the use of sunlight is one of the issues to be solved in photocatalysis technology.In this study,the CuFe_(2)O_(4)@C/Cd_(0.9)Zn_(0.1)S(CFO@C/CZS)S-scheme photocatalyst with photothermal effect was synthesized by ultrasonic self-assembly combined with calcination.The dark CFO@C absorbed visible light and partly converted into heat to promote the hydrogen evolution reaction.The presence of heterojunctions inhibited the photogenerated electron-hole recombination.The graphite-carbon layer provided a stable channel for electron transfer,and the presence of magnetic CFO made recycle easier.Under the action of photothermal assistance and heterojunction,the hydrogen evolution rate of the optimal CFO@C/CZS was 80.79 mmol g^(-1) h^(-1),which was 2.55 times and 260.61 times of that of pure CZS and CFO@C,respectively.Notably,the composite samples also exhibit excellent stability and a wide range of environmental adaptability.Through experimental tests and first-principles simulation calculation methods,the plausible mechanism of photoactivity enhancement was proposed.This work provided a feasible strategy of photothermal assistance for the development of heterojunction photocatalysts with distinctive hydrogen evolution.

关键词： Photothermal effect S-scheme heterojunction Photocatalytic hydrogen evolution First-principles calculations

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Promoting effect of FeOx addition on the mechanochemically prepared vanadium-based catalyst for real PCDD/Fs removal and mechanism insight

引用

Journal of Environmental Sciences 2024年第3期137卷 478-487页

作者： minghui Tang Ling Wang Hongxian Li Xinlei Huang Cuicui Du Shengyong Lu State Key Laboratory for Clean Energy Utilization Institute for Thermal Power EngineeringZhejiang UniversityHangzhou 310027China

Industrial-use VOx-based catalysts usually have a higher active temperature window (>250-300℃),which becomes a“bottleneck”for the practical application of PCDD/Fs catalytic degradation technology.In this work,VO_(x)-FeO_(x)/TiO_(2) catalyst prepared via mechanochemically method was investigated for the catalytic removal of PCDD/Fs.The removal efficiency of 1,2-DCBz,pure PCDD/Fs gas generated in the lab,PCDD/Fs from actual fue gas,long-term were studied,and the degradation mechanism was explored using FTIR and TOFMS.The degradation efficiency of 1,2-DCBz and PCDD/Fs on VO_(x)-FeO_(x)/TiO_(2) were higher than that of VO_(x)/TiO_(2)catalyst,and the optimal FeOx addition ratio was 3 wt.%.The characterization results show that the addition of FeOx can effectively improve the pore structure,surface acidity,and VOx dispersion of the catalyst,thus contributing to increasing the V^(5+)content and surface-active oxygen,which is conducive to the improvement of adsorption and redox performance of the catalyst.Under the actual MSWI (municipal solid waste incineration)fue gas,the PCDD/Fs removal efficiency over VTi-3Fe-MC maintained long-term stability,higher than 85%for 240 min.This result was not significantly reduced compared with the data obtained in the laboratory.According to the analysis results of intermediate products by FTIR and GC-TOFMS,it can be inferred that the epoxidation fracture of benzene ring is the rate-limiting step of dioxin catalytic degradation reaction.This work gives an in-depth view into the PCDD/Fs removal over VO_(x)-FeO_(x)/TiO_(2) catalysts and could provide guidelines for the rational design of reliable catalysts for industrial applications.

关键词： PCDD/F removal MSWI fue gas VO_(x)-FeO_(x)/TiO_(2) Mechanochemical GC-TOFMS

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Human brain organoid:trends,evolution,and remaining challenges

引用

Neural Regeneration Research 2024年第11期19卷 2387-2399页

作者： minghui Li Yuhan Yuan Zongkun Hou Shilei Hao Liang Jin Bochu Wang Key Laboratory of Biorheological Science and Technology Ministry of EducationCollege of BioengineeringChongqing UniversityChongqingChina Southwest Hospital/Southwest Eye Hospital Third Military Medical University(Army Medical University)ChongqingChina School of Biology and Engineering/School of Basic Medical Sciences Guizhou Medical UniversityGuiyangGuizhou ProvinceChina

Advanced brain organoids provide promising platforms for deciphering the cellular and molecular processes of human neural development and diseases.Although various studies and reviews have described developments and advancements in brain organoids,few studies have comprehensively summarized and analyzed the global trends in this area of neuroscience.To identify and further facilitate the development of cerebral organoids,we utilized bibliometrics and visualization methods to analyze the global trends and evolution of brain organoids in the last 10 years.First,annual publications,countries/regions,organizations,journals,authors,co-citations,and keywords relating to brain organoids were identified.The hotspots in this field were also systematically identified.Subsequently,current applications for brain organoids in neuroscience,including human neural development,neural disorders,infectious diseases,regenerative medicine,drug discovery,and toxicity assessment studies,are comprehensively discussed.Towards that end,several considerations regarding the current challenges in brain organoid research and future strategies to advance neuroscience will be presented to further promote their application in neurological research.

关键词： bibliometric analysis brain organoids cerebral organoids global trends neuroscience

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Semi-supervised surface defect detection of wind turbine blades with YOLOv4

引用

Global Energy Interconnection 2024年第3期7卷 284-292页

作者： Chao Huang minghui Chen Long Wang Department of Computer and Communication Engineering University of Science and Technology BeijingBeijing 100083P.R.China Shunde Innovation School University of Science and Technology BeijingFoshan 528399P.R.China

Timely inspection of defects on the surfaces of wind turbine blades can effectively prevent unpredictable accidents.To this end,this study proposes a semi-supervised object-detection network based on You Only Looking Once version 4(YOLOv4).A semi-supervised structure comprising a generative adversarial network(GAN)was designed to overcome the difficulty in obtaining sufficient samples and sample labeling.In a GAN,the generator is realized by an encoder-decoder network,where the backbone of the encoder is YOLOv4 and the decoder comprises inverse convolutional layers.Partial features from the generator are passed to the defect detection network.Deploying several unlabeled images can significantly improve the generalization and recognition capabilities of defect-detection models.The small-scale object detection capacity of the network can be improved by enhancing essential features in the feature map by adding the concurrent spatial and channel squeeze and excitation(scSE)attention module to the three parts of the YOLOv4 network.A balancing improvement was made to the loss function of YOLOv4 to overcome the imbalance problem of the defective species.The results for both the single-and multi-category defect datasets show that the improved model can make good use of the features of the unlabeled images.The accuracy of wind turbine blade defect detection also has a significant advantage over classical object detection algorithms,including faster R-CNN and DETR.

关键词： Defect detection Generative adversarial network scSE attention Semi-supervision Wind turbine

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Revealing the anti-sintering phenomenon on silica-supported nickel catalysts during CO_(2)hydrogenation

引用

Journal of Environmental Sciences 2024年第6期140卷 270-278页

作者： Liuqingqing Yang Tiancheng Pu Feixiang Tian Yulian He minghui Zhu State Key Laboratory of Chemical Engineering School of Chemical EngineeringEast China University of Science and TechnologyShanghai 200237China University of Michigan-Shanghai Jiao Tong University Joint Institute Shanghai Jiao Tong UniversityShanghai 200240China School of Chemistry and Chemical Engineering Shanghai Jiao Tong UniversityShanghai 200240China

The CO_(2)catalytic hydrogenation represents a promising approach for gas-phase CO_(2)utilization in a direct manner.Due to its excellent hydrogenation ability,nickel has been widely studied and has shown good activities in CO_(2)hydrogenation reactions,in addition to its high availability and low price.However,Ni-based catalysts are prone to sintering under elevated temperatures,leading to unstable catalytic performance.In the present study,various characterization techniques were employed to study the structural evolution of Ni/SiO_(2)during CO_(2)hydrogenation.An anti-sintering phenomenon is observed for both 9%Ni/SiO_(2)and 1%Ni/SiO_(2)during CO_(2)hydrogenation at 400℃.Results revealed that Ni species were re-dispersed into smaller-sized nanoparticles and formed Ni^(0)active species.While interestingly,this anti-sintering phenomenon leads to distinct outcomes for two catalysts,with a gradual increase in both reactivity and CH_(4)selectivity for 9%Ni/SiO_(2)presumably due to the formation of abundant surface Ni°from redispersion,while an apparent decreasing trend of CH_(4)selectivity for 1%Ni/SiO_(2)sample,presumably due to the formation of ultra-small nanoparticles that diffuse and partially filled the mesoporous pores of the silica support over time.Finally,the redispersion phenomenon was found relevant to the H_(2)gas in the reaction environment and enhanced as the H_(2)concentration increased.This finding is believed to provide in-depth insights into the structural evolution of Ni-based catalysts and product selectivity control in CO_(2)hydrogenation reactions.

关键词： Carbon dioxide utilization CO_(2)hydrogenation Nickel-based catalysts Anti-sintering Structural evolution

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

A review of structural modification and biological activities of oleanolic acid

引用

Chinese Journal of Natural Medicines 2024年第1期22卷 15-30页

作者： YANG Huali DENG minghui JIA Hongwei ZHANG Kaicheng LIU Yang CHENG Maosheng XIAO Wei State Key Laboratory of New-tech for Chinese Medicine Pharmaceutical Process Jiangsu Kanion Pharmaceutical Co.Ltd.Lianyungang 222001China Key Laboratory of Structure-Based Drug Design&Discovery of Ministry of Education School of Pharmaceutical EngineeringShenyang Pharmaceutical UniversityShenyang 110016China

Oleanolic acid(OA),a pentacyclic triterpenoid,exhibits a broad spectrum of biological activities,including antitumor,antiviral,antibacterial,anti-inflammatory,hepatoprotective,hypoglycemic,and hypolipidemic effects.Since its initial isolation and identification,numerous studies have reported on the structural modifications and pharmacological activities of OA and its derivatives.Despite this,there has been a dearth of comprehensive reviews in the past two decades,leading to challenges in subsequent research on OA.Based on the main biological activities of OA,this paper comprehensively summarized the modification strategies and structureactivity relationships(SARs)of OA and its derivatives to provide valuable reference for future investigations into OA.

关键词： Oleanolic acid Derivatives Pentacyclic triterpenoid Structural modification Biological activities

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：