检索结果-南通市图书馆

Development in oxide metallurgy for improving the weldability of high -strength low-alloy steel-Combined deoxidizers and microalloying elements

引用

International Journal of Minerals,Metallurgy and Materials 2024年第6期31卷 1263-1284页

作者： Tingting li jian Yang State Key Laboratory of Advanced Special Steel School of Materials Science and EngineeringShanghai UniversityShanghai 200444China

The mechanisms of oxide metallurgy include inducing the formation of intragranular acicular ferrite(IAF)using micron-sized inclusions and restricting the growth of prior austenite grains(PAGs)by nanosized particles during *** chaotically oriented IAF and refined PAGs inhibit crack initiation and propagation in the steel,resulting in high impact *** work summarizes the com-bined effect of deoxidizers and alloying elements,with the aim to provide a new perspective for the research and practice related to im-proving the impact toughness of the heat affected zone(HAZ)during the high heat input *** complex deoxidation with other strong deoxidants,such as Mg,Ca,Zr,and rare earth metals(REMs),can improve the toughness of the heat-affected zone(HAZ)by re-fining PAGs or increasing IAF ***,it is difficult to identify the specific phase responsible for IAF nucleation because ef-fective inclusions formed by complex deoxidation are usually *** alloying elements,such as C,Si,Al,Nb,or Cr,con-tents can impair HAZ toughness.A high C content typically increases the number of coarse carbides and decreases the potency of IAF ***,Cr,or Al addition leads to the formation of undesirable *** reduces the high-temperature stability of the ***,V,and B can enhance HAZ ***-containing precipitates present good thermal *** or V(C,N)is ef-fective in promoting IAF nucleation due to its good coherent crystallographic relationship with *** formation of the B-depleted zone around the inclusion promotes IAF *** interactions between alloying elements are complex,and the effect of adding dif-ferent alloying elements remains to be *** the future,the interactions between various alloying elements and their effects on ox-ide metallurgy,as well as the calculation of the nucleation effects of effective inclusions using first principles calculations will become the focus of

关键词： oxide metallurgy technology heat affected zone high-strength low-alloy steel intragranular acicular ferrite microalloying element

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Design,fabrication,and characterization of hierarchical mechanical metamaterials

引用

Frontiers of Mechanical Engineering 2024年第1期19卷 73-83页

作者： jian SONG Junfei YAN Bengang yi Automotive Engineering Research Institute BYD Auto Industry Co.Ltd.Shenzhen 518000China College of Civil and Transportation Engineering Shenzhen UniversityShenzhen 518060China

Natural mechanical materials,such as bamboo and bone,often exhibit superior specific mechanical properties due to their hierarchical porous *** the principle of hierarchy as inspiration can facilitate the development of hierarchical mechanical metamaterials(HMMs)across multiple length scales via 3D *** this work,we propose self-similar HMMs that combine octet-truss(OCT)architecture as the first and second orders,with cubic architecture as the third or more *** HMMs were fabricated using stereolithography 3D printing,with the length sizes ranging from approximately 200µm to the centimeter *** compressive stress–strain behaviors of HMMs exhibit a zigzag characteristic,and the toughness and energy absorption can be significantly enhanced by the hierarchical *** compressive moduli are comparable to that of natural materials,and the strengths are superior to that of most polymer/metal foams,alumina hollow/carbon lattices,and other natural ***,the flexural stress–strain curves exhibit a nonlinear behavior,which can be attributed to the hierarchical architecture and local damage *** relatively high mechanical properties can be attributed to the synergistic effect of the stretch-dominated OCT architecture and the bending-dominated cube ***,an ultralight HMM-integrated unmanned aerial vehicle(HMM-UAV)was successfully designed and *** HMM-UAV is~85%lighter than its bulk counterpart,remarkably extending the flight duration time(~53%).This work not only provides an effective design strategy for HMMs but also further expands the application benchmark of HMMs.

关键词： 3D printing mechanical metamaterials hierarchical architecture mechanical behavior unmanned aerial vehicle(UAV)

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Impact of stage-specific limb function exercises guided by a selfmanagement education model on arteriovenous fistula maturation status

引用

World Journal of Clinical Cases 2024年第14期12卷 2316-2323页

作者： yi li li-Jun Huang jian-Wen Hou Dan-Dan Hu Department of Nursing The People's Hospital of Jianyang CityJianyang 641400Sichuan ProvinceChina Department of Nephrology The People's Hospital of Jianyang CityJianyang 641400Sichuan ProvinceChina Department of Head and Neck Surgery Zhejiang Cancer HospitalHangzhou 310000Zhejiang ProvinceChina School of Nursing Shangqiu Institute of TechnologyShangqiu 476005Henan ProvinceChina

BACKGROUND The exercise of limb function is the most economical and safe method to promote the maturation of arteriovenous fistula(AVF).However,due to the lack of a uni-fied exercise standard in China,many patients have insufficient awareness of the importance of AVF,leading to poor effectiveness of limb function *** self-management education model can effectively promote patients to take pro-active health-related *** study focuses on the characteristics of patients during the peri-AVF period and conducts a phased limb function exercise under the guidance of the self-management education model to observe changes in fac-tors such as the maturity of *** To assess the impact of stage-specific limb function exercises,directed by a self-management education model,on the maturation status of *** This study is a randomized controlled trial involving 74 patients with forearm AVFs from the Nephrology Department of a tertiary hospital in Sichuan Province,*** were randomly divided into an observation group and a control group using a random number table *** observation group underwent tailored stage-specific limb func-tion exercises,informed by a self-management education model which took into account the unique features of AVF at various stages,in conjunction with routine ***,the control group was given standard limb function exercises along with routine *** assessment involves the maturity of AVFs post-intervention,post-operative complications,and the self-management level of the fistula in both groups *** were conducted using SPSS version *** data were represented by frequency and percentage and subjected to chi-square test *** data adhering to a normal distribution were presented as mean±*** independent samples t-test was utilized for inter-group comparisons,while the paired t-test was used for intra-group *** measurement data not fitting a normal distr

关键词： Self-management Education model Stage-specific limb function exercises Arteriovenous fistula Maturation status

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

A Novel Anti-Collision Algorithm for Large Scale of UHF RFID Tags Access Systems

引用

Computers, Materials & Continua 2024年第7期80卷 897-912页

作者： Xu Zhang yi He Haiwen yi Yulu Zhang Yuan li Shuai Ma Gui li Zhiyuan Zhao Yue liu Junyang liu Guangjun Wen jian li School of Information and Communication Engineering/yibin Institute University of Electronic Science and Technology of ChinaChengdu611731China Department of IoT Technology Research China Mobile Research InstituteBeijing100053China The 10th Research Institute of China Electronics Technology Group Corporation Chengdu611731China College of Information and Communication National University of Defense TechnologyWuhan430019China

When the radio frequency identification(RFID)system inventories multiple tags,the recognition rate will be seriously affected due to *** on the existing dynamic frame slotted Aloha(DFSA)algorithm,a sub-frame observation and cyclic redundancy check(CRC)grouping combined dynamic framed slotted Aloha(SUBF-CGDFSA)algorithm is *** algorithm combines the precise estimation method of the quantity of large-scale tags,the large-scale tags grouping mechanism based on CRC pseudo-randomcharacteristics,and the Aloha anti-collision optimization mechanism based on sub-frame *** grouping tags and sequentially identifying themwithin subframes,it accurately estimates the number of remaining tags and optimizes frame length accordingly to improve efficiency in large-scale RFID *** outcomes demonstrate that this proposed algorithmcan effectively break through the system throughput bottleneck of 36.8%,which is up to 30%higher than the existing DFSA standard scheme,and has more significant advantages,which is suitable for application in largescale RFID tags scenarios.

关键词： Radio frequency identification anti-collision tags grouping dynamic framed slotted Aloha

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Regulating metal-acid double site balance on mesoporous SiO2-Al2O3 composite oxide for supercritical n-decane cracking

引用

Petroleum Science 2024年第4期21卷 2881-2891页

作者： liu-ling Chen Jun Zhang Chun-Guang li li-Qun Fei Bo Wang Chen-Qi Zhang yi Jiao jian-li Wang Institute of New Energy and Low-Carbon Technology Sichuan University Engineering Research Center of Combustion and Cooling for Aerospace Power Ministry of Education School of Chemical Engineering Sichuan University State Key Laboratory of Industrial Vent Gas Reuse Southwest Institute of Chemical Co. Ltd Science and Technology on Scramjet Laboratory Beijing Power Machinery Research Institute

The balance between metal and acid sites directly affects the preparation of high-performance cracking catalysts with high heat sink and low ***,how to control acid-metal sites balance and its relationship with cracking performance are reported *** this work,a series of Pt/Al2O3-SiO2dual sites catalysts with different metal to acid active sites ratio(CM/CSA) were constructed by ethanolassisted impregnation method and the impact on n-decane cracking under supercritical conditions was systematically and deeply *** results showed that the conversion and carbon deposition increased gradually with varied CM/CSAand reached the balance at CM/CSAof *** proper ratio CM/CSA（0.13） can balance the deep dehydrogenation coking over metal active sites and high heat sink of cracking over acid active sites,the chemical heat sink reaches amazing 1.75 MJ/kg and carbon deposition is only22.03 mg/cm2at 750℃.Meanwhile,the few metal sites at low CM/CSAand the few strong acid sites at high CM/CSAare the main factors limiting the cracking *** CM/CSAlimit the activation of C-H bond and deep dehydrogenation of coking precursor,resulting in relative low cracking activity and carbon deposition,while high CM/CSAlimit the activation of C-C bond and increase the deep *** this contribution,design and construction of metal-acid dual sites can not only provide the technical solution for the preparation of high heat sink and low coking cracking catalyst,but also deepen the understanding of the cracking path of hydrocarbon fuel.

关键词： Metal-acid dual sites balance Catalytic cracking Hydrocarbon fuels Chemical heat sink Carbon deposition

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Self-assembly of perovskite nanocrystals:From driving forces to applications

引用

Journal of Energy Chemistry 2024年第1期88卷 561-578,I0013页

作者： yi li Fei Zhang School of Chemical Engineering and Technology Tianjin UniversityTianjin 300072China Collaborative Innovation Center of Chemical Science and Engineering(Tianjin) Tianjin 300072China

Self-assembly of metal halide perovskite nanocrystals(NCs)into superlattices can exhibit unique collective properties,which have significant application values in the display,detector,and solar cell *** review discusses the driving forces behind the self-assembly process of perovskite NCs,and the commonly used self-assembly methods and different self-assembly structures are ***,we summarize the collective optoelectronic properties and application areas of perovskite superlattice ***,we conclude with an outlook on the potential issues and future challenges in developing perovskite NCs.

关键词： Self-assembly Metal halide perovskite Nanocrystals Driving forces

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Development and validation of a prediction model for early screening of people at high risk for colorectal cancer

引用

World Journal of Gastroenterology 2024年第5期30卷 450-461页

作者： ling-li Xu yi lin li-Yuan Han Yue Wang jian-Jiong li Xiao-Yu Dai Department of General Surgery Ningbo No.2 HospitalNingbo 315000Zhejiang ProvinceChina Center for Health Economics Faculty of Humanities and Social SciencesUniversity of NottinghamNingbo 315100Zhejiang ProvinceChina Department of Global Health Ningbo Institute of Life and Health IndustryUniversity of Chinese Academy of SciencesNingbo 315000Zhejiang ProvinceChina School of Public Health Medical College of Soochow UniversitySuzhou 215123Jiangsu ProvinceChina

BACKGROUND Colorectal cancer(CRC)is a serious threat *** early screening is suggested to be the most effective method to prevent and control CRC,the current situation of early screening for CRC is still not *** China,the incidence of CRC in the Yangtze River Delta region is increasing dramatically,but few studies have been ***,it is necessary to develop a simple and efficient early screening model for *** To develop and validate an early-screening nomogram model to identify individuals at high risk of *** Data of 64448 participants obtained from Ningbo Hospital,China between 2014 and 2017 were retrospectively *** cohort comprised 64448 individuals,of which,530 were excluded due to missing or incorrect *** 63918,7607(11.9%)individuals were considered to be high risk for CRC,and 56311(88.1%)were *** participants were randomly allocated to a training set(44743)or validation set(19175).The discriminatory ability,predictive accuracy,and clinical utility of the model were evaluated by constructing and analyzing receiver operating characteristic(ROC)curves and calibration curves and by decision curve ***,the model was validated internally using a bootstrap resampling *** Seven variables,including demographic,lifestyle,and family history information,were *** logistic regression analysis revealed that age[odds ratio(OR):1.03,95%confidence interval(CI):1.02-1.03,Plifestyle(OR:0.45,95%CI:0.42-0.48,Plifestyle was a protective factor,whereas family history was the most significant risk *** area under the curve was 0.734(95%CI:0.723-0.745)for the final validation set ROC curve and 0.735(95%CI:0.728-0.742)for the training s

关键词： Colorectal cancer Early screening model High-risk population Nomogram model Questionnaire survey Dietary habit living habit

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

基于应变片法的低温条件下热膨胀特征参数的测量方法与装置（英文）

引用

Journal of Zhejiang University-Science A(Applied Physics & Engineering) 2014年第5期15卷 323-330页

作者： Ke TANG Long SHA yi-jian li Tao JIN Shu-juan liU Institute of Refrigeration and Cryogenics Zhejiang University

研究目的:为了满足低温系统的材料选择和结构设计对于材料热膨胀特征参数的需求,研发低温条件下精确、快速、方便操作、低成本的热膨胀特征参数测量方法和系统装置。创新要点:完成了卡玛合金箔应变片在77–293 K低温温区敏感系数的修正... 详细信息

研究目的:为了满足低温系统的材料选择和结构设计对于材料热膨胀特征参数的需求,研发低温条件下精确、快速、方便操作、低成本的热膨胀特征参数测量方法和系统装置。创新要点:完成了卡玛合金箔应变片在77–293 K低温温区敏感系数的修正,保证了基于应变片技术的低温条件材料热膨胀特征参数测量的精度;所研制装置合理的热设计和等速率式温度控制模式使得材料热膨胀特征参数在77–293 K温区的测量可在14小时内快速完成。研究方法:针对77–293 K温区,基于应变片测量方法,研制了采用比例-积分-微分(PID)温控系统的固体材料热膨胀特征参数测量装置(见图2和3)。通过将304不锈钢的测量数据与美国国家标准与技术研究院(NIST)公布数据进行比较,完成了卡玛合金箔应变片在77–293 K低温温区的敏感系数修正(见图7和8)。采用修正后的敏感系数进行无氧铜线性收缩率测量,并与NIST公布数据比较(见图9和表2),验证了该装置在77–293 K低温温区的测量精度。重要结论:获得了77–293 K低温温区卡玛合金箔应变片敏感系数的修正结果;基于修正敏感系数的应变片法测量装置,采用0.3 K/min的等速率式温度控制模式,可实现77–293 K低温温区固体材料热膨胀特征参数的精确、快速测量。

关键词：热膨胀线性收缩率应变片低温

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Comprehensive evaluation of rare case:From diagnosis to treatment of a sigmoid Schwannoma:A case report

引用

World Journal of Gastrointestinal Oncology 2024年第1期16卷 244-250页

作者： Jing-yi li Xi-Zhuang Gao jian Zhang Xiang-Zheng Meng yi-Xian Cao Kun Zhao Clinical Medical College of Jining Medical University Jining Medical UniversityJining 272000Shandong ProvinceChina Department of Gastroenterology The First People's Hospital of JiningJining 272000Shandong ProvinceChina

BACKGROUND Schwannomas are uncommon tumors originating from Schwann cells,forming the neural *** account for approximately 2%-6%of all mesenchymal tumors and are most commonly identified in peripheral nerve trunks,with rarity in the gastrointestinal *** gastrointestinal locations,the stomach harbors the majority of nerve sheath tumors,while such occurrences in the sigmoid colon are exceptionally *** SUMMARY This study presented a clinical case involving a 60-year-old female patient who,during colonoscopy,was diagnosed with a submucosal lesion that was later identified as a nerve sheath *** patient underwent surgical resection,and the diagnosis was confirmed through *** study highlighted an exceptionally uncommon occurrence of a nerve sheath tumor in the sigmoid colon,which was effectively managed within our ***,a comprehensive review of relevant studies was *** The preoperative diagnosis of nerve sheath tumors poses challenges,as the definitive diagnosis still relies on pathology and *** categorized as benign,these tumors have the potential to demonstrate malignant ***,the optimal treatment approach entails the complete surgical excision of the tumor,ensuring the absence of residual lesions at the margins.

关键词： Schwannoma Gastrointestinal stromal tumors Treatment Sigmoid colon Case report

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Passive IoT Localization Technology Based on SD-PDOA in NLOS and Multi-Path Environments

引用

Computers, Materials & Continua 2024年第7期80卷 913-930页

作者： Junyang liu Yuan li Yulu Zhang Shuai Ma Gui li yi He Haiwen yi Yue liu Xiaotao Xu Xu Zhang Jinyao He Guangjun Wen jian li School of Information and Communication Engineering/yibin Institute University of Electronic Science and Technology of ChinaChengdu611731China Department of IoT Technology Research China Mobile Research InstituteBeijing100053China The 10th Research Institute of China Electronics Technology Group Corporation Chengdu611731China College of Information and Communication National University of Defense TechnologyWuhan430019China

Addressing the challenges of passive Radio Frequency Identification(RFID)indoor localization technology in Non-line-of-Sight(NLoS)and multipath environments,this paper presents an innovative approach by introducing a combined technology integrating an improved Kalman Filter with Space Domain Phase Difference of Arrival(SD-PDOA)and Received Signal Strength Indicator(RSSI).This methodology utilizes the distinct channel characteristics in multipath and NLoS contexts to effectively filter out interference and accurately extract localization information,thereby facilitating high precision and stability in passive RFID *** efficacy of this approach is demonstrated through detailed simulations and empirical tests conducted on a custom-built experimental platform consisting of passive RFID tags and an R420 *** findings are significant:in NLoS conditions,the four-antenna localization system achieved a notable localization accuracy of 0.25 m at a distance of 5 *** complex multipath environments,this system achieved a localization accuracy of approximately 0.5 m at a distance of 5 *** compared to conventional passive localization methods,our proposed solution exhibits a substantial improvement in indoor localization accuracy under NLoS and multipath *** research provides a robust and effective technical solution for high-precision passive indoor localization in the Internet of Things(IoT)system,marking a significant advancement in the field.

关键词： Indoor localization multipath and NLoS environments combined SD-PDOA and RSSI technology

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：