检索结果-南通市图书馆

Ultra reliability and massive connectivity provision in integrated internet of military things(IoMT)based on tactical datalink

在线全文

学校读者我要写书评

暂无评论

Defence Technology（防务技术） 2024年第3期33卷 386-398页

作者： Li Bing Yating Gu Lanke Hu Li Bowen yang lihua Jue Wang Yue Yin Northwestern Polytechnical University Xi'an 710072China China Academy of Information and Communications Technology Beijing 100191China China Intelligent and Connected Vehicles(Beijing)Research Institute Co. LtdBeijing 100176China The 20th Research Institute of China Electronic Technology Group Corporation Xi’an 710068China Xidian University Xi'an 710071China

One of the major challenges arising in internet of military things(IoMT)is accommodating massive connectivity while providing guaranteed quality of service(QoS)in terms of ultra-high reliability.In this regard,this paper presents a class of code-domain nonorthogonal multiple accesses(NOMAs)for uplink ultra reliable networking of massive IoMT based on tactical datalink such as Link-16 and joint tactical information distribution system(JTIDS).In the considered scenario,a satellite equipped with Nr antennas servers K devices including vehicles,drones,ships,sensors,handset radios,etc.Nonorthogonal coded modulation,a special form of multiple input multiple output(MIMO)-NOMA is proposed.The discussion starts with evaluating the output signal to interference-plus-noise(SINR)of receiver filter,leading to the unveiling of a closed-form expression for overloading systems as the number of users is significantly larger than the number of devices admitted such that massive connectivity is rendered.The expression allows for the development of simple yet successful interference suppression based on power allocation and phase shaping techniques that maximizes the sum rate since it is equivalent to fixed-point programming as can be proved.The proposed design is exemplified by nonlinear modulation schemes such as minimum shift keying(MSK)and Gaussian MSK(GMSK),two pivotal modulation formats in IoMT standards such as Link-16 and JITDS.Numerical results show that near capacity performance is offered.Fortunately,the performance is obtained using simple forward error corrections(FECs)of higher coding rate than existing schemes do,while the transmit power is reduced by 6 dB.The proposed design finds wide applications not only in IoMT but also in deep space communications,where ultra reliability and massive connectivity is a keen concern.

关键词： Satellite network Deep space communications Internet of military things Non-orthogonal multiple access MIMO Link-16 JITDS

Clinical observation on 90 cases of primary dysmenorrhea treated by buccal acupuncture therapy:a randomized controlled study

在线全文

学校读者我要写书评

暂无评论

Journal of Traditional Chinese Medicine 2024年第1期44卷 172-181页

作者： yang Yi YE Huijun ZHENG Huiling JIN lihua Department of Obstetrics and Gynecology the Second Affiliated Hospital of Zhejiang Chinese Medical UniversityXinhua Hospital of Zhejiang ProvinceHangzhou 310005China

OBJECTIVE:To explore the short-term and long-term efficacy of buccal acupuncture therapy in the treatment of patients with primary dysmenorrhea(PD).METHODS:A total of 90 patients with PD who were admitted to the Second Affiliated Hospital of Zhejiang University of Traditional Chinese Medicine from January 2020 to December 2021 were included in this study and randomly divided into three groups,including the observation group,the control group,and the placebo group,with 30 patients in each group.Patients in the observation group were treated according to the syndrome types of Traditional Chinese Medicine,those in the control group were treated with Saridon,and those in the placebo group received a placebo.The visual analog scale(VAS)scores of these patients were evaluated at different time points(before treatment,5 min after needle retention,30 min after needle retention,1 h after treatment,2 h after treatment,1 d after treatment,and 2 d after treatment).The Cox Menstrual Symptom Scale(CMSS)scores were assessed before the treatment and after three courses of treatment.Besides,these two scales were also evaluated during follow-up.Moreover,the pain score and adverse reactions of these patients were assessed during treatment.RESULTS:After treatment,the VAS and CMSS scores in the observation group decreased significantly(P<0.05)5 and 30 min after needle retention and after treatment.CONCLUSION:Buccal acupuncture therapy is verified to have short-term efficacy in the treatment of PD.In addition,this therapy has an immediate analgesic effect and long-term efficacy in reducing the severity and frequency of PD.

关键词： buccal acupuncture therapy primary dysmenorrhea pain score randomized controlled trial

Efficient and stable PtFe alloy catalyst for electrocatalytic methanol oxidation with high resistance to CO

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第3期90卷 327-336,I0008页

作者： Qian yang Sifan Zhang Fengshun Wu lihua Zhu Guang Li Mingzhi Chen An Pei Yingliang Feng Jiangxi Provincial Key Laboratory of Functional Molecular Materials Chemistry College of Chemistry and Chemical EngineeringFaculty of Materials Metallurgy and ChemistryJiangxi University of Science and TechnologyGanzhou 341000JiangxiChina College of Chemistry and Chemical Engineering Xiamen UniversityXiamen 361005FujianChina

Direct methanol fuel cells(DMFC) are widely considered to be an ideal green energy conversion device but their widespread applications are limited by the high price of the Pt-based catalysts and the instability in terms of surface CO toxicity in long-term operation.Herein,the PtFe alloy nanoparticles(NPs) with small particle size(~4.12 nm) supported on carbon black catalysts with different Pt/Fe atomic ratios(Pt_(1)Fe_(2)/C,Pt_(3)Fe_(4)/C,Pt_(1)Fe_(1)/C,and Pt_(2)Fe_(1)/C) are successfully prepared for enhanced anti-CO poisoning during methanol oxidation reaction(MOR).The optimal atomic ratio of Pt/Fe for the MOR is 1:2,and the mass activity of Pt_(1)Fe_(2)/C(5.40 A mg_(Pt)^(-1)) is 13.5 times higher than that of conventional commercial Pt/C(Pt/C-JM)(0.40 A mg_(Pt)^(-1)).The introduction of Fe into the Pt lattice forms the PtFe alloy phase,and the electron density of Pt is reduced after forming the PtFe alloy.In-situ Fourier transform infrared results indicate that the addition of oxyphilic metal Fe has reduced the adsorption of reactant molecules on Pt during the MOR.The doping of Fe atoms helps to desorb toxic intermediates and regenerate Pt active sites,promoting the cleavage of C-O bonds with good selectivity of CO_(2)(58.1%).Moreover,the Pt_(1)Fe_(2)/C catalyst exhibits higher CO tolerance,methanol electrooxidation activity,and long-term stability than other Pt_(x)Fe_(y)/C catalysts.

关键词： Alloy catalyst PtFe Methanol oxidation In-situ FTIR CO resistance

On asymptotic stability of the 3D Boussinesq equations without heat conduction

在线全文

学校读者我要写书评

暂无评论

Science China Mathematics 2024年第2期67卷 253-280页

作者： lihua Dong Yongzhong Sun School of Physical and Mathematical Sciences Nanjing Tech UniversityNanjing 211816China Department of Mathematics Nanjing UniversityNanjing 210093China

We investigate the asymptotic stability of the solutions to Boussinesq equations without heat conduction with the initial data near a specific stationary solution in the three-dimensional domain Ω=R^(2)×(0,1).It is shown that the solution starting from a small perturbation to the stationary solution converges to it with explicit algebraic rates as time tends to infinity.

关键词： Boussinesq equations stationary solutions asymptotic stability decay rates

Negative enthalpy alloys and local chemical ordering:a concept and route leading to synergy of strength and ductility

在线全文

学校读者我要写书评

暂无评论

National Science Review 2024年第4期11卷 172-184页

作者： Zibing An Tao yang Caijuan Shi Shengcheng Mao lihua Wang Ang Li Wei Li Xianmeng Xue Ming Sun Yifan Bai Yapeng He Fuzeng Ren Zhouguang Lu Ming Yan yang Ren Chain-Tsuan Liu Ze Zhang Xiaodong Han Beijing Key Lab of Microstructure and Property of Advanced Materials College of Materials Science &Engineering Beijing University of Technology Department of Materials Science and Engineering City University of Hong Kong Key Laboratory of Partial Acceleration Physics& Technology Institute of High Energy PhysicsChinese Academy of Sciences Department of Materials Science &Engineering Southern University of Science and Technology Department of Physics City University of Hong Kong State Key Laboratory of Silicon Materials Department of Materials Science and Engineering Zhejiang University

Solid solutions are ubiquitous in metals and alloys. Local chemical ordering(LCO) is a fundamental sub-nano/nanoscale process that occurs in many solid solutions and can be used as a microstructure to optimize strength and ductility. However, the formation of LCO has not been fully elucidated, let alone how to provide efficient routes for designing LCO to achieve synergistic effects on both superb strength and ductility. Herein, we propose the formation and control of LCO in negative enthalpy alloys. With engineering negative enthalpy in solid solutions, genetic LCO components are formed in negative enthalpy refractory high-entropy alloys(RHEAs). In contrast to conventional ‘trial-and-error' approaches, the control of LCO by using engineering negative enthalpy in RHEAs is instructive and results in superior strength(1160 MPa) and uniform ductility(24.5%) under tension at ambient temperature, which are among the best reported so far. LCO can promote dislocation cross-slip, enhancing the interaction between dislocations and their accumulation at large tensile strains; sustainable strain hardening can thereby be attained to ensure high ductility of the alloy. This work paves the way for new research fields on negative enthalpy solid solutions and alloys for the synergy of strength and ductility as well as new functions.

关键词： negative enthalpy alloys local chemical ordering strength ductility dislocation

Investigations on High-Speed Flash Boiling Atomization of Fuel Based on Numerical Simulations

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Computer Modeling in Engineering & Sciences 2024年第5期139卷 1427-1453页

作者： Wei Zhong Zhenfang Xin lihua Wang Haiping Liu School of Aerospace Engineering and Applied Mechanics Tongji UniversityShanghai200092China Beijing Mechanical Equipment Research Institute Beijing100854China

Flash boiling atomization(FBA)is a promising approach for enhancing spray atomization,which can generate a fine and more evenly distributed spray by increasing the fuel injection temperature or reducing the ambient pressure.However,when the outlet speed of the nozzle exceeds 400 m/s,investigating high-speed flash boiling atomization(HFBA)becomes quite challenging.This difficulty arises fromthe involvement ofmany complex physical processes and the requirement for a very fine mesh in numerical simulations.In this study,an HFBA model for gasoline direct injection(GDI)is established.This model incorporates primary and secondary atomization,as well as vaporization and boilingmodels,to describe the development process of the flash boiling spray.Compared to lowspeed FBA,these physical processes significantly impact HFBA.In this model,the Eulerian description is utilized for modeling the gas,and the Lagrangian description is applied to model the droplets,which effectively captures the movement of the droplets and avoids excessive mesh in the Eulerian coordinates.Under various conditions,numerical solutions of the Sauter mean diameter(SMD)for GDI show good agreement with experimental data,validating the proposed model’s performance.Simulations based on this HFBA model investigate the influences of fuel injection temperature and ambient pressure on the atomization process.Numerical analyses of the velocity field,temperature field,vapor mass fraction distribution,particle size distribution,and spray penetration length under different superheat degrees reveal that high injection temperature or low ambient pressure significantly affects the formation of small and dispersed droplet distribution.This effect is conducive to the refinement of spray particles and enhances atomization.

关键词： High-speed flash boiling atomization numerical simulations Eulerian description Lagrangian description gasoline direct injection

CFD-DEM study on the synergistic effect of coke consumption and particle dynamics in the blast furnace raceway

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Particuology 2024年第6期89卷 270-278页

作者： Peng Xu Peng Han Zhijun He Xizhong An Kang Sun lihua Gao Key Laboratory of Green Low-Carbon and Intelligent Metallurgy School of Materials and MetallurgyUniversity of Science and Technology LiaoningAnshan 114000China Key Laboratory for Ecological Metallurgy of Multimetallic Mineral of Ministry of Education School of MetallurgyNortheastern UniversityShenyang110819China

In this study,the gas-solid flow process in the blast furnace raceway is numerically simulated using coupled computational fluid dynamics and the discrete element method(CFD-DEM).The coke reaction kinetics data are imported into the DEM model to reproduce the consumption process of each coke particle.The effects of inlet gas velocity and angle on the morphology of the raceway,coke consumption rate,coke bed temperature,and particle size distribution in the blast process are systematically investigated and analyzed.The results show that the consumption of coke particles promotes the formation of raceways during the blast process.At the same time,a coke mixture layer is produced at the edge of the raceway.The higher the inlet gas velocity,the thicker the coke mixture layer in the middle and upper parts of the raceway region,and the larger the proportion of small particles in the coke mixture layer.The effect of the inlet gas angle on the raceway region is less than the inlet gas velocity.However,with the increase in the inlet gas angle,the high-temperature region of the coke bed extends downward gradually,which is conducive to activating the hearth.

关键词： Blast furnace Raceway Multiphase flow CFD-DEM Modeling

Deep learning-based time-varying channel estimation with basis expansion model for MIMO-OFDM system

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

High Technology Letters 2022年第3期28卷 288-294页

作者：呼博 yang lihua REN Lulu NIE Qian College of Communication and Information Engineering Nanjing University of Posts and TelecommunicationsNanjing 210003P.R.China

For high-speed mobile MIMO-OFDM system,a low-complexity deep learning(DL) based timevarying channel estimation scheme is proposed.To reduce the number of estimated parameters,the basis expansion model(BEM) is employed to model the time-varying channel,which converts the channel estimation into the estimation of the basis coefficient.Specifically,the initial basis coefficients are firstly used to train the neural network in an offline manner,and then the high-precision channel estimation can be obtained by small number of inputs.Moreover,the linear minimum mean square error(LMMSE) estimated channel is considered for the loss function in training phase,which makes the proposed method more practical.Simulation results show that the proposed method has a better performance and lower computational complexity compared with the available schemes,and it is robust to the fast time-varying channel in the high-speed mobile scenarios.

关键词： MIMO-OFDM high-speed mobile time-varying channel deep learning(DL) basis expansion model(BEM)

Tertiary orientation structures enhance the piezoelectricity of MXene/PVDF nanocomposite

在线全文

学校读者我要写书评

暂无评论

Nano Research 2024年第6期17卷 5629-5635页

作者： Yong Ao Tao yang Guo Tian Shenglong Wang Tianpei Xu Lin Deng Jieling Zhang lihua Tang Weili Deng Long Jin Weiqing yang Key Laboratory of Advanced Technologies of Materials(Ministry of Education) School of Materials Science and EngineeringSouthwest Jiaotong UniversityChengdu 610031China Department of Mechanical Engineering The University of AucklandAuckland 1010New Zealand Research Institute of Frontier Science Southwest Jiaotong UniversityChengdu 610031China

With the increasing demand for flexible piezoelectric sensor components,research on polyvinylidene fluoride(PVDF)based piezoelectric polymers is mounting up.However,the low dipole polarization and disordered polarization direction presented in PVDF hinder further improvement of piezoelectric properties.Here,we constructed an oriented tertiary structure,consisting of molecular chains,crystalline region,and MXene sheets,in MXene/PVDF nanocomposite via a temperature-pressure dual-field regulation method.The highly oriented PVDF molecular chains form approximately 90%of theβphase.In addition,the crystalline region structure with long-range orientation achieves out of plane polarization orientation.The parallel orientation arrangement of MXene effectively enhances the piezoelectric performances of the nanocomposite,and the current output of the device increases by nearly 23 times.This high output device is used to monitor exercise action,exploring the potential applications in wearable electronics.

关键词： flexible sensor piezoelectric MXene/polyvinylidene fluoride(PVDF)nanocomposite orientation structures