检索结果-南通市图书馆

Transforming waste particles into valuable adsorbents via amyloid-mediated molecular engineering

Science China Chemistry 2025年第1期68卷 317-328页

作者： Qingmin yang Jian Zhao Yujia Zhang Xingyu Zhou Hao Ren Bowen Hu Zhongli lei Lixin Chen Peng yang School of Material and Chemical Engineering Bengbu University Anhui Provincial Engineering Laboratory of Silicon-Based Materials School of Chemistry and Chemical Engineering Northwestern Polytechnical University Key Laboratory of Applied Surface and Colloid Chemistry Ministry of Education School of Chemistry and Chemical EngineeringShaanxi Normal University Xi'an Key Laboratory of Polymeric Soft Matter School of Chemistry and Chemical Engineering Shaanxi Normal University International Joint Research Center on Functional Fiber and Soft Smart Textile School of Chemistry and Chemical EngineeringShaanxi Normal University

The high-value utilization of industrial solid waste using a facile and eco-friendly process is of great interest and significance in reducing environmental pollution and developing a green circular economy. Herein, we propose an amyloid-mediated molecular engineering strategy to transform particulate waste into valuable adsorbents for metal ions. Our method has the advantage of aqueous solution fabrication under mild conditions without the use of high-temperature hydrothermal methods and toxic chemical reagents. Amyloid-mediated molecular engineering manipulates the phase transition of bovine serum albumin(BSA)on particulate waste surfaces, resulting in a remarkable ～3.1 times improvement in the adsorption capacity of fly ash, a typical industrial solid waste for gold ions after modification with the phase-transitioned BSA(PTB). The resultant adsorption ability was 69–1,980 times higher than those of conventional and emerging adsorbent materials such as ion exchange resins, activated carbon(AC), covalent organic frameworks(COFs), and metal-organic frameworks(MOFs). We further demonstrated the application of our PTB-modified materials in the recovery of precious metals from low-grade gold ore and electronic waste leachates. Consequently, this strategy could increase the value of waste materials nearly 27 times. In addition, this method is generally extendable to other conventional industrial adsorbents such as resin, clay, and Al2O3, and enhances their adsorption capabilities at least twofold. Overall, this work provides a simple and green approach for improving the adsorption performance of solid particles, and is expected to develop into a universal strategy for transforming waste particles into high-value-added products.

关键词： amyloid-like protein aggregates surface engineering fly ash solid waste adsorption

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Force and impulse multi-sensor based on flexible gate dielectric field effect transistor

引用

International Journal of Minerals,Metallurgy and Materials 2025年第1期32卷 214-220页

作者： Chao Tan Junling Lü Chunchi Zhang Dong Liang lei yang Zegao Wang College of Materials Science and Engineering Sichuan UniversityChengdu 610065China The 54th Research Institute of China Electronics Technology Group Corporation Shijiazhuang 050081China

Nowadays,force sensors play an important role in industrial production,electronic information,medical health,and many other ***-dimensional material-based filed effect transistor(2D-FET)sensors are competitive with nano-level size,lower power consumption,and accurate ***,few of them has the capability of impulse detection which is a path function,expressing the cumulative effect of the force on the particle over a period of *** we fabricated the flexible polymethyl methacrylate(PMMA)gate dielectric MoS_(2)-FET for force and impulse sensor *** systematically investigated the responses of the sensor to constant force and varying forces,and achieved the conversion factors of the drain current signals(I_(ds))to the detected impulse(I).The applied force was detected and recorded by I_(ds)with a low power consumption of~30 *** sensitivity of the device can reach~8000%and the 4×1 sensor array is able to detect and locate the normal force applied on ***,there was almost no performance loss for the device as left in the air for two months.

关键词： flexible gate dielectric transistor force sensor impulse sensor force sensor array

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Effects of the extrusion parameters on microstructure,texture and room temperature mechanical properties of extruded Mg-2.49Nd-1.82Gd-0.2Zn-0.2Zr alloy

引用

International Journal of Minerals,Metallurgy and Materials 2025年第1期32卷 136-146页

作者： Chenjin Zhang Guangyu yang lei Xiao Zhiyong Kan Jing Guo Qiang Li Wanqi Jie State Key Laboratory of Solidification Processing Northwestern Polytechnical UniversityXi’an 710072China College of Materials Science and Engineering Fuzhou UniversityFuzhou 350108China College of Chemistry and Environmental Science Qujing Normal UniversityQujing 655011China

Microstructure,texture,and mechanical properties of the extruded Mg-2.49Nd-1.82Gd-0.2Zn-0.2Zr alloy were investigated at different extrusion temperatures(260 and 320℃),extrusion ratios(10:1,15:1,and 30:1),and extrusion speeds(3 and 6 mm/s).The experimental results exhibited that the grain sizes after extrusion were much finer than that of the homogenized alloy,and the second phase showed streamline distribution along the extrusion direction(ED).With extrusion temperature increased from 260 to 320℃,the microstructure,texture,and mechanical properties of alloys changed *** dynamic recrystallization(DRX)degree and grain sizes enhanced as the extrusion ratio increased from 10:1 to 30:1,and the strength gradually decreased but elongation(EL)*** the extrusion speed increased from 3 to 6 mm/s,the grain sizes and DRX degree increased significantly,and the samples presented the typical-rare-earth(RE)*** alloy extruded at 260℃ with extrusion ratio of 10:1 and extrusion speed of 3 mm/s showed the tensile yield strength(TYS)of 213 MPa and EL of 30.6%.After quantitatively analyzing the contribution of strengthening mechanisms,it was found that the grain boundary strengthening and dislocation strengthening played major roles among strengthening *** results provide some guidelines for enlarging the industrial application of extruded Mg-RE alloy.

关键词： Mg-rare earth alloys extrusion temperature extrusion ratio extrusion speed strengthening mechanisms

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Structural designs and mechanism insights into electrocatalytic oxidation of 5-hydroxymethylfurfural

引用

Journal of Energy Chemistry 2025年第1期100卷 792-814页

作者： Jing lei Huijie Zhang Jian yang Jia Ran Jiqiang Ning Haiyan Wang Yong Hu Key Laboratory of the Ministry of Education for Advanced Catalysis Materials Department of Chemistry Zhejiang Normal University Jinhua Advanced Research Institute Department of Optical Science and Engineering Fudan University College of Chemistry and Materials Engineering Zhejiang A&F University

Biomass conversion offers an efficient approach to alleviate the energy and environmental *** oxidation of 5-hydroxymethylfurfural(HMF) has attracted tremendous attention in the latest few years for the mild synthesis conditions and high conversion efficiency to obtain 2,5-furan dicarboxylic acid(FDCA), but there still remain problems such as limited yield, short cycle life,and ambiguous reaction mechanism. Despite many reviews highlighting a variety of electrocatalysts for electrochemical oxidation of HMF, a detailed discussion of the structural modulation of catalyst and the underlying catalytic mechanism is still lacking. We herein provide a comprehensive summary of the recent development of electrochemical oxidation of HMF to FDCA, particularly focusing on the mechanism studies as well as the advanced strategies developed to regulate the structure and optimize the performance of the electrocatalysts, including heterointerface construction, defect engineering,single-atom engineering, and in situ reconstruction. Experimental characterization techniques and theoretical calculation methods for mechanism and active site studies are elaborated, and challenges and future directions of electrochemical oxidation of HMF are also prospected. This review will provide guidance for designing advanced catalysts and deepening the understanding of the reaction mechanism beneath electrochemical oxidation of HMF to FDCA.

关键词： Structural design

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Constructing quasi-2D perovskite to collect hot carriers to reduce open-circuit voltage loss for efficient inverted perovskite solar cells

引用

Science China Chemistry 2025年

作者： lei Gu Xing Li Chao Wu yang Feng Chunming yang Lin Song Frontiers Science Center for Flexible Electronics Institute of Flexible Electronics Northwestern Polytechnical University Shanghai Synchrotron Radiation Facility Shanghai Advanced Research Institute Chinese Academy of Sciences

Inverted perovskite solar cells （PSCs） have received great attention owing to the high certificated power conversion efficiency（PCE） reaching 26.7%. However, interfacial charge recombination is far superior to perovskite bulk charge recombination due to the use of fullerenes and their derivatives in inverted perovskite solar cells, which induces devastating open circuit voltage（VOC） losses. For this reason the present work attempts to use 4-chloropiperidine hydrochloride for the upper surface modification of perovskite to construct a quasi-two-dimensional （2D） structure with suitable 2D layer widths （n=2, 3 dominant）,which has a smaller electron carrier transport barrier without sacrificing short-circuit current （JSC） in the device. This strategy effectively passivates the interfacial defect states while promoting energy level alignment to achieve carrier dissociation and equilibrium transport at the interface, which in turn resulted in improved fill factor （FF）. In addition, additional energy levels are provided by 2D perovskites to collect hot carriers, resulting in improved device open circuit voltage （VOC）. As a result, the device PCE increases from 22.37%to 24.11%after the 4CPD treatment. In addition, the 4CPD-treated PSCs maintain 90%of the initial PCE after storage in an N2atmosphere at 50°C for 1,080 h, whereas the control devices show a 15%PCE loss under the same aging conditions. This work provides new opportunities to suppress interfacial charge recombination in inverted devices.

关键词：

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Industrial solid wastes to environmental protection materials for removal of gaseous pollutants:A review

引用

Green Energy & Environment 2025年第1期10卷 34-83页

作者： Jiacheng Bao Xin Sun Ping Ning Kai Li Jie yang Fei Wang lei Shi Maohong Fan Faculty of Environmental Science and Engineering Kunming University of Science and TechnologyKunming650500China College of Engineering and Physical Sciences and School of Energy ResourcesUniversity of WyomingLaramieWY82071USA College of Engineering Georgia Institute of TechnologyAtlantaGA30332USA

The application of industrial solid wastes as environmentally functional materials for air pollutants control has gained much attention in recent years due to its potential to reduce air pollution in a cost-effective *** this review,we investigate the development of industrialwaste-based functional materials for various gas pollutant removal and consider the relevant reaction mechanism according to different types of industrial solid *** see a recent effort towards achieving high-performance environmental functional materials via chemical or physical modification,in which the active components,pore size,and phase structure can be *** review will discuss the potential of using industrial solid wastes,these modified materials,or synthesized materials from raw waste precursors for the removal of air pollutants,including SO_(2),NO_(x),Hg^(0),H_(2)S,VOCs,and CO_(2).The challenges still need to be addressed to realize this potential and the prospects for future research *** suggestions for future directions include determining the optimal composition of these materials,calculating the real reaction rate and turnover frequency,developing effective treatment methods,and establishing chemical component databases of raw industrial solid waste for catalysts/adsorbent preparation.

关键词： Industrial solid waste Reaction mechanism Modification method Air pollutants

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

基于降阶广义积分器的LCL型有源电力滤波器电流控制方法研究

引用

中国电机工程学报 2017年第7期37卷 2057-2067页

作者：杨家强杨磊曾争宿紫鹏浙江大学电气工程学院浙江省杭州市310027 广东电网有限责任公司电力科学研究院广东省广州市510080

为了实现LCL型有源电力滤波器(active power filter,APF)在稳定控制的同时,不增加系统的复杂程度,提出了一种基于电网电流检测、逆变侧电流反馈的电流双环控制方法。在不额外增加电流传感器的情况下,通过引入逆变侧电流反馈,实现了对LC... 详细信息

为了实现LCL型有源电力滤波器(active power filter,APF)在稳定控制的同时,不增加系统的复杂程度,提出了一种基于电网电流检测、逆变侧电流反馈的电流双环控制方法。在不额外增加电流传感器的情况下,通过引入逆变侧电流反馈,实现了对LCL滤波器谐振尖峰的有源阻尼。同时,为了准确地跟踪电网中的谐波电流信号,在2阶广义积分器的基础上,提出了基于降阶广义积分器的电流控制器。利用降阶积分器频率选择和相序解耦的特性,同时实现了较高的谐波补偿精度和运算效率。在一台50k VA LCL型APF上对所提出的控制方法进行了实验验证,实验结果证明了该方法的有效性。

关键词：有源电力滤波器降阶广义积分器 LCL滤波器电网电流检测逆变侧电流反馈有源阻尼

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

仿人机器人多传感器定位系统

引用

浙江大学学报（工学版） 2018年第7期52卷 1247-1252页

作者：柯显信张文朕杨阳温雷上海大学机电工程与自动化学院上海200072

为了提高仿人机器人SHFR-III人机交互系统的定位精度和定位可靠性,设计多传感器定位系统,包括基于热释电红外传感器垂直阵列的红外定位系统、基于听觉传感器三角形阵列的听觉定位系统和基于立体双目视觉的视觉定位系统.提出权重随目标... 详细信息

为了提高仿人机器人SHFR-III人机交互系统的定位精度和定位可靠性,设计多传感器定位系统,包括基于热释电红外传感器垂直阵列的红外定位系统、基于听觉传感器三角形阵列的听觉定位系统和基于立体双目视觉的视觉定位系统.提出权重随目标位置和外部环境可变的加权平均融合算法,将3种定位数据的融合结果作为最终定位结果.实验结果证明:多传感器定位系统的限制条件比单传感器定位系统更少,环境适应性更强,有效提高了交互系统的整体定位精度和可靠性.

关键词：仿人机器人传感器阵列双目视觉多传感器定位数据融合

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

High-dense nanocrystalline W-based alloy prepared by hot isostatic pressing with uniform microstructure, ultrahigh hardness and good thermal stability

引用

Tungsten 2025年第1期7卷 120-136页

作者： Zao-Ming Wu Lin He Lin-Sen Ye Xiao-Feng yang Jia-Jia Zhang Hong-Bo lei Institute of Materials China Academy of Engineering Physics

High-density uniform microstructure nanocrystalline W-10wt.% Cr-5wt.% Y（W-10Cr-5Y） alloy with an average grain size of 85 nm and a relative density of 99.8% was successfully prepared.W-Cr-Y alloys with different amounts of second-phase particles were prepared by high-energy ball milling and hot isostatic pressing *** effects of composition design,ball milling parameters,and sintering parameters on the microstructure of W-Cr-Y alloys were studied.A feasible technology for controlling the synthesis of high-density nanocrystalline W-based alloys has been *** microstructure analysis of nanocrystalline W-10Cr-5Y alloy shows that there are two types of doping in the second phase:intergranular doping and intragranular *** "uniform distribution YOx-rich particles" effectively suppresses the grain growth of W and leads to the formation of nanocrystalline W-10Cr-5Y alloy.W-10Cr-5Y has an ultra-high hardness,with a Vickers hardness of 1312±12 kgf·***-temperature annealing treatment shows that W-10Cr-5Y has good thermal stability at 1000 and1100℃,as demonstrated by the comparison of Vickers hardness and grain size between annealed and unannealed alloys.

关键词： Hot isostatic pressing Microstructure Nanocrystalline tungsten Thermal stability Vickers hardness

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

AAV2-PDE6B restores retinal structure and function in the retinal degeneration 10 mouse model of retinitis pigmentosa by promoting phototransduction and inhibiting apoptosis

引用

Neural Regeneration Research 2025年第8期20卷 2408-2419页

作者： Ruiqi Qiu Mingzhu yang Xiuxiu Jin Jingyang Liu Weiping Wang Xiaoli Zhang Jinfeng Han Bo lei Henan Eye Hospital Henan Provincial People’s HospitalPeople’s Hospital of Zhengzhou UniversityZhengzhouHenan ProvinceChina Eye Institute Henan Academy of Innovations in Medical ScienceZhengzhouHenan ProvinceChina Branch of National Clinical Research Center for Ocular Disease Henan Provincial People’s HospitalZhengzhouHenan ProvinceChina Academy of Medical Science Zhengzhou UniversityZhengzhouHenan ProvinceChina

Retinitis pigmentosa is a group of inherited diseases that lead to retinal degeneration and photoreceptor cell ***,there is no effective treatment for retinitis pigmentosa caused by PDE6B ***-associated virus(AAV)-mediated gene therapy is a promising strategy for treating retinitis *** aim of this study was to explore the molecular mechanisms by which AAV2-PDE6B rescues retinal *** do this,we injected retinal degeneration 10(rd10)mice subretinally with AAV2-PDE6B and assessed the therapeutic effects on retinal function and structure using dark-and light-adapted electroretinogram,optical coherence tomography,and ***-independent acquisition-mass spectrometry-based proteomic analysis was conducted to investigate protein expression levels and pathway enrichment,and the results from this analysis were verified by real-time polymerase chain reaction and western ***2-PDE6B injection significantly upregulated PDE6βexpression,preserved electroretinogram responses,and preserved outer nuclear layer thickness in rd10 *** expressed proteins between wild-type and rd10 mice were closely related to visual perception,and treating rd10 mice with AAV2-PDE6B restored differentially expressed protein expression to levels similar to those seen in wild-type *** Encyclopedia of Genes and Genome analysis showed that the differentially expressed proteins whose expression was most significantly altered by AAV2-PDE6B injection were enriched in phototransduction ***,the phototransductionrelated proteins Pde6α,Rom1,Rho,Aldh1a1,and Rbp1 exhibited opposite expression patterns in rd10 mice with or without AAV2-PDE6B ***,Bax/Bcl-2,p-ERK/ERK,and p-c-Fos/c-Fos expression levels decreased in rd10 mice following AAV2-PDE6B *** data suggest that AAV2-PDE6B-mediated gene therapy promotes phototransduction and inhibits apoptosis by inhibiting the ERK signaling pathway and upr

关键词： apoptosis AAV2-PDE6B ERK1/2 gene therapy phototransduction proteomics rd10 retinitis pigmentosa

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：