检索结果-南通市图书馆

Journal of Thermal Science 2024年第2期33卷 602-610页

作者： WANG Songbai WU yadong CHEN Yong CAO Zhipeng School of Mechanical Engineering Shanghai Jiao Tong UniversityShanghai200240China AECC Sichuan Gas Turbine Establishment Chengdu610500China

The complex flow phenomenon of rotating instability(RI) and its induced non-synchronous vibration(NSV) have become a significant challenge as they continuously increase aerodynamic load.This study aims to provide an understanding of the non-synchronous blade vibration phenomenon caused by the rotating instability of a transonic axial compressor rotor.In this case,blade vibrations and non-synchronous excitation are captured by strain gauges and unsteady wall pressure transducer sensors.Unsteady numerical simulations for a full-annulus configuration are used to obtain the non-synchronous flow excitation.The results show that the first-stage rotor blade exhibits an NSV close to the first bending mode;NSV is accompanied by a sharp increase in pressure pulsation;amplitude can reach 20%,and unsteady aerodynamic frequency will lock in a structural mode frequency when the blade vibrates in a large-amplitude motion.The predicted NSV frequency aligns well with the experimental results.The dominant mode of circumferential instability flow structure is approximately 47% of the number blades,and the cell size occupies 2-3 pitches in the circumferential direction.The full-annulus unsteady simulations demonstrate that the streamwise oscillation of the shedding and reattachment vortex structure is the main cause of NSV owing to the strong interaction between the tip leakage and separation vortices near the suction surface.

关键词： non-synchronous vibration transonic axial compressor rotor blade rotating instabilities unsteady flow

Extraction of Valuable Metals from Titanium-bearing Blast Furnace Slag by Acid Leaching

在线全文

学校读者我要写书评

暂无评论

Journal of Wuhan University of Technology(Materials Science) 2024年第2期39卷 376-385页

作者：刘燕 CHEN Xuegui MAO Shuaidong XIAO yadong LI Jiacong School of Metallurgy Northeastern UniversityShenyang 110819China Key Laboratory of Ecological Metallurgy of Multi-metal Intergrown Ores of Ministry of Education Shenyang 110819China

To realize the resource utilization of the valuable metals in the titanium-containing blast furnace slag,the process route of “hydrochloric acid leaching-electrolysis-carbonization and carbon dioxide capture-preparation of calcium carbonate” was proposed.In this study,the influences of process conditions on the leaching rates of calcium,magnesium,aluminum,and iron and the phases of the leaching residue were investigated for the leaching process.The experimental results show that the HCl solution could selectively leach the elements from the titanium-containing blast furnace slag.The better leaching conditions are the HCl solution concentration of 4 mol/L,the leaching time of 30 min,the ratio of liquid volume to solid gas of 10 mL/g,and the stirring paddle speed of 300 r/min.Under the conditions,the leaching rates of calcium,magnesium,aluminum,and iron can reach 85.87%,73.41%,81.35%,and 59.08%,and the leaching rate of titanium is 10.71%.The iron and the aluminum are removed from the leachate to obtain iron-aluminum water purification agents,and the magnesium is removed from the leachate to obtain magnesium hydroxide.The leaching residue phase is dominated by perovskite,followed by magnesium silicate and tricalcium aluminate,and the titaniumrich material could be obtained from the leaching residue by desiliconization.

关键词： titanium-containing blast furnace slag acid leaching valuable metals comprehensive utilization

Plasma-etching on monolithic MOFs-based MIM filter boosted chemical sensing

在线全文

学校读者我要写书评

暂无评论

Nano Research 2024年第4期17卷 2800-2807页

作者： Jianxi Liu Li Feng Zhihuan Li Yang Wu Feng Zhou yadong Xu Research&Development Institute Northwestern Polytechnical University in ShenzhenShenzhen 518057China State Key Laboratory of Solidification Processing Center of Advanced Lubrication and Seal MaterialsSchool of Materials Science and EngineeringNorthwestern Polytechnical UniversityXi’an 710072China Yantai Zhongke Research Institute of Advanced Materials and Green Chemical Engineering Shandong Laboratory of Advanced Materials and Green Manufacturing at YantaiYantai 264006China State Key Laboratory of Solid Lubrication Lanzhou Institute of Chemical PhysicsChinese Academy of SciencesLanzhou 730000China

Metal-insulator-metal(MIM)cavity as a lithography-free structure to control light transmission and reflection has great potential in the field of optical sensing.However,the dense top metal layer of the MIM prohibits any external medium from entering the dielectric insulation layer,which limits the application of the cavity in the sensing field.Herein,we demonstrate a series of monolithic metal-organic frameworks(MOFs)based MIM cavities,which are treated by plasma etching to provide channels for chemical diffusion and to advance sensing.We modulate the bandwidth of the MIM filters by controlling the MOF thickness as insulator layers.Oxygen plasma-etching is applied to build channels on the top metal layer without altering their saturation and brightness for chemical sensing performance.The etching time regulates the number and size of channels on the top metal layer.Sensing behavior is demonstrated on the plasma-etched MOFs-based MIM cavity when external chemicals diffuse in the cavity.In addition,we generate patterned structure of the MOFs-based MIM cavity via plasma-mask method,which can transfer to different substrates and produce a controllable structure color change for chemical sensing.Our MIM cavity may promote the advancement and applications of structural color in security imaging,color display,information anticounterfeiting,and color printing.

关键词： metal-organic frameworks(MOFs) spin-coating metal-insulator-metal filter patterns sensing

Influence of Recycled Concrete Fine Powder on durability of Cement Mortar

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Fluid Dynamics & Materials Processing 2024年第1期20卷 45-58页

作者： yadong Bian Xuan Qiu Jihui Zhao Zhong Li Jiana Ouyang School of Architectural and Civil Engineering Zhongyuan University of TechnologyZhengzhou450007China School of Civil Engineering Sun Yat-Sen University&Southern Marine Science and Engineering Guangdong Laboratory(Zhuhai)Zhuhai519082China

In this paper,the durability of cement mortar prepared with a recycled-concrete fine powder(RFP)was examined;including the analysis of a variety of aspects,such as the carbonization,sulfate attack and chloride ion erosion resistance.The results indicate that the influence of RFP on these three aspects is different.The carbonization depth after 30 days and the chloride diffusion coefficient of mortar containing 10%RFP decreased by 13.3%and 28.19%.With a further increase in the RFP content,interconnected pores formed between the RFP particles,leading to an acceleration of the penetration rate of CO_(2)and Cl^(−).When the RFP content was less than 50%,the corrosion resistance coefficient of the compressive strength of the mortar was 0.84-1.05 after 90 days of sulfate attack.But the expansion and cracking of the mortar was effectively alleviated due to decrease of the gypsum production.Scanning electron microscope(SEM)analysis has confirmed that 10%RFP contributes to the formation of a dense microstructure in the cement mortar.

关键词： Recycled concrete fine powder cement mortar carbonization sulfate chloride ion durability

Deep Reinforcement Learning Based Resource Allocation for Fault Detection with Cloud Edge Collaboration in Smart Grid

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

CSEE Journal of Power and Energy Systems 2024年第3期10卷 1220-1230页

作者： Qiyue Li yadong Zhu Jinjin Ding Weitao Li Wei Sun Lijian Ding Hefei University of Technology Engineering Technology Research Center of Industrial Automation Hefei 230009China Electric Power Research Institute of State Grid Anhui Electric Power Co. Ltd.Hefei 230000China Hefei University of Technology Hefei 230009China IEEE CSEE

Real-time fault detection is important for operation of smart grid.It has become a trend of future development to design an anomaly detection system based on deep learning by using the powerful computing power of the cloud.However,delay of Internet transmission is large,which may make the delay time of detection and transmission go beyond the limits.However,the edge-based scheme may not be able to undertake all data detection tasks due to limited computing resources of edge devices.Therefore,we propose a cloud-edge collaborative smart grid fault detection system,next to which edge devices are placed,and equipped with a lightweight neural network with different precision for fault detection.In addition,a sub-optimal and realtime communication and computing resource allocation method is proposed based on deep reinforcement learning.This method greatly speeds up solution time,which can meet the requirements of data transmission delay,maximize the system throughput,and improve communication efficiency.Simulation results show the scheme is superior in transmission delay and improves real-time performance of the smart grid detection system.

关键词： Cloud-edge collaboration communication delay deep reinforcement learning fault detection smart grid

Simulation of the Ecosystem Productivity Responses to Aerosol Diffuse Radiation Fertilization Effects over the Pan-Arctic during 2001–19

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Advances in Atmospheric Sciences 2024年第1期41卷 84-96页

作者： Zhiding ZHANG Xu YUE Hao ZHOU Jun ZHU yadong LEI Chenguang TIAN Jiangsu Key Laboratory of Atmospheric Environment Monitoring and Pollution Control Collaborative Innovation Center of Atmospheric Environment and Equipment TechnologySchool of Environmental Science and EngineeringNanjing University of Information Science&Technology(NUIST)Nanjing 210044China Climate Change Research Center Institute of Atmospheric Physics(IAP)Chinese Academy of Sciences(CAS)Beijing 100029China University of Chinese Academy of Sciences Beijing 100049China State Key Laboratory of Severe Weather&Key Laboratory of Atmospheric Chemistry of CMA Chinese Academy of Meteorological SciencesBeijing 100081China

The pan-Arctic is confronted with air pollution transported from lower latitudes.Observations have shown that aerosols help increase plant photosynthesis through the diffuse radiation fertilization effects(DRFEs).While such DRFEs have been explored at low to middle latitudes,the aerosol impacts on pan-Arctic ecosystems and the contributions by anthropogenic and natural emission sources remain less quantified.Here,we perform regional simulations at 0.2o×0.2ousing a well-validated vegetation model(Yale Interactive terrestrial Biosphere,YIBs)in combination with multi-source of observations to quantify the impacts of aerosol DRFEs on the net primary productivity(NPP)in the pan-Arctic during 2001-19.Results show that aerosol DRFEs increase pan-Arctic NPP by 2.19 Pg C(12.8%)yr^(-1)under clear-sky conditions,in which natural and anthropogenic sources contribute to 8.9% and 3.9%,respectively.Under all-sky conditions,such DRFEs are largely dampened by cloud to only 0.26 Pg C(1.24%)yr^(-1),with contributions of 0.65% by natural and 0.59% by anthropogenic species.Natural aerosols cause a positive NPP trend of 0.022% yr^(-1)following the increased fire activities in the pan-Arctic.In contrast,anthropogenic aerosols induce a negative trend of-0.01% yr^(-1)due to reduced emissions from the middle latitudes.Such trends in aerosol DRFEs show a turning point in the year of 2007 with more positive NPP trends by natural aerosols but negative NPP trends by anthropogenic aerosols thereafter.Though affected by modeling uncertainties,this study suggests a likely increasing impact of aerosols on terrestrial ecosystems in the pan-Arctic under global warming.

关键词： diffuse radiation fertilization effects anthropogenic aerosols natural aerosols pan-Arctic net primary productivity

A novel method for simulating nuclear explosion with chemical explosion to form an approximate plane wave: Field test and numerical simulation

在线全文

学校读者我要写书评

暂无评论

Journal of Rock Mechanics and Geotechnical Engineering 2024年第6期16卷 2137-2153页

作者： Wei Ming Xiaojie Yang yadong Mao Xiang Wang Manchao He Zhigang Tao College of Civil and Architecture Engineering North China University of Science and TechnologyTangshan063210China State Key Laboratory for Tunnel Engineering China University of Mining and Technology-BeijingBeijing100083China School of Mechanics and Civil Engineering China University of Mining and Technology-BeijingBeijing100083China

A nuclear explosion in the rock mass medium can produce strong shock waves,seismic shocks,and other destructive effects,which can cause extreme damage to the underground protection infrastructures.With the increase in nuclear explosion power,underground protection engineering enabled by explosion-proof impact theory and technology ushered in a new challenge.This paper proposes to simulate nuclear explosion tests with on-site chemical explosion tests in the form of multi-hole explosions.First,the mechanism of using multi-hole simultaneous blasting to simulate a nuclear explosion to generate approximate plane waves was analyzed.The plane pressure curve at the vault of the underground protective tunnel under the action of the multi-hole simultaneous blasting was then obtained using the impact test in the rock mass at the site.According to the peak pressure at the vault plane,it was divided into three regions:the stress superposition region,the superposition region after surface reflection,and the approximate plane stress wave zone.A numerical simulation approach was developed using PFC and FLAC to study the peak particle velocity in the surrounding rock of the underground protective cave under the action of multi-hole blasting.The time-history curves of pressure and peak pressure partition obtained by the on-site multi-hole simultaneous blasting test and numerical simulation were compared and analyzed,to verify the correctness and rationality of the formation of an approximate plane wave in the simulated nuclear explosion.This comparison and analysis also provided a theoretical foundation and some research ideas for the ensuing study on the impact of a nuclear explosion.

关键词： Approximate plane wave Multi-hole simultaneous blasting Chemical explosion Nuclear explosion Pressure sensor inclusion

Nano-enabled solar driven-interfacial evaporation:Advanced design and opportunities

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano Research 2023年第5期16卷 6015-6038页

作者： Xin Zhao Xiangtong Meng Hongqi Zou Yanjun Zhang Yangjun Ma yadong du Yuan Shao Jun Qi Jieshan Qiu State Key Laboratory of Organic–Inorganic Composites State Key Laboratory of Chemical Resource EngineeringCollege of Chemical EngineeringBeijing University of Chemical TechnologyBeijing 100029China Guangxi key Laboratory of Green Chemical Materials and Safety Technology Beibu Gulf UniversityQinzhou 535011China

Solar-driven interfacial evaporation(SDIE)is emerging as a promising pathway to solving the worldwide water shortage and water pollution.Nanomaterials(e.g.,plasmonic metals,inorganic/organic semiconductors,and carbon nanomaterials)and related nanochemistry have attracted increasing attention for the solar-to-vapor process in terms of broadband absorption,electronic structure adjustment,and surface/interface chemistry manipulation.Furthermore,the assembly of nanomaterials can contribute to the mass transfer,heat management,and enthalpy regulation of water during solar evaporation.To date,numerous nano-enabled materials and structures have been developed to improve the solar absorption,heat management(i.e.,heat confinement and heat transfer),and water management(i.e.,activation,evaporation,and replenishment).In this review,we focus on a systematical summary about the composition and structure engineering of nanomaterials in SDIE,including size and morphology effects,nanostructure optimizations,and structure-property relationship decoupling.This review also surveys recent advances in nanochemistry(e.g.,preparation chemistry and structural chemistry)deployed to conceptual design of nanomaterials.Finally,the key challenges and future perspectives of nanomaterials for solar evaporation are overviewed.This review aims at providing guidance for the design and construction of nanomaterials for high-efficiency SDIE on the basis of the aspects of materials science and chemical engineering.

关键词： nanomaterials nanochemistry solar-driven interfacial evaporation solar-to-heat conversion light/heat management water activation

Observation of an upward lightning flash with 21 upward positive leaders initiated from different wind turbines in wind farm

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

High Voltage 2024年第1期9卷 163-171页

作者： Li Cai Yifeng Ke Wenchao Fan Ruisheng Yan Mi Zhou Jianguo Wang yadong Fan Engineering Research Center of Ministry of Education for Lightning Protection and Grounding Technology School of Electrical Engineering and AutomationWuhan UniversityWuhanChina

As the wind turbine height increases,the probability of multiple upward leaders flashes within the wind farm increases.In this study,an upward lightning flash containing 21 upward positive leaders(UPLs)initiated from different wind turbines in Zhangbei Wind Farm was analysed.The average speed of the UPLs was 1.2×10^(5) m/s,which mostly decreased to zero before reaching the cloud height.Only four UPLs developed to cloud height,with prolonged periods of bright light on three of them and with a minimum duration of 126 ms.A total of nine return strokes occurred on the other two dissipated leader channels,and the numbers of strokes on the two channels was six and three,respectively.The average interstroke interval for the return strokes was 10.5 ms.Most of these nine return strokes had peak currents smaller than 10 kA.The high-speed video frames confirmed that competition does exist between the UPLs,and the range of shielding effects increases as the height of the ULs increases.The effect of fan rotation on the initiation of upward leaders and the shielding effect between the wind turbines and upward leaders are discussed.

关键词： flash return initiated

Ferroelectric-controlled graphene plasmonic surfaces for all-optical neuromorphic vision

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Science China(Technological Sciences) 2024年第3期67卷 765-773页

作者： CHEN JianBo LIU Yu LI ShangDong LIN Lin LI yadong HUANG Wen GUO JunXiong School of Electronic Information and Electrical Engineering Institute for Advanced StudyChengdu UniversityChengdu 610106China School of Integrated Circuits Tsinghua UniversityBeijing 100084China School of Integrated Circuits(National Exemplary Schoolof Microelectronics) Universityof Electronic Science and Technologyof China Chengdu 610054China Jincheng Research Institute of Opto-mechatronics Industry Jincheng 048000China Shanxi Key Laboratory of Advanced Semiconductor Optoelectronic Devices and Integrated Systems Jincheng 048000China Engineering Research Center of Digital Imaging and Display Ministry of EducationSoochow UniversitySuzhou 215006China

Artificial visual systems can recognize desired objects and information from complex environments, and are therefore highly desired for pattern recognition, object detection, and imaging applications. However, state-of-the-art artificial visual systems with high recognition performances that typically consist of electronic devices face the challenges of requiring huge storage space and high power consumption owing to redundant data. Here, we report a terahertz(THz) frequency-selective surface using a graphene split-ring resonator driven by ferroelectric polarization for efficient visual system applications. The downward polarization of the ferroelectric material offers an ultrahigh electrostatic field for doping p-type graphene with an anticipated Fermi level. By optimizing the geometric parameters of the devices and modulating the carrier behaviors of graphene, our plasmonic devices exhibit a tunable spectral response in a range of 1.7–6.0 THz with continuous transmission values. The alloptical neural network using graphene plasmonic surfaces designed in this study exhibited excellent performance in visual preprocessing and convolutional filtering and achieved an ultrahigh recognition accuracy of up to 99.3% in training the Modified National Institute of Standards and Technology(MNIST) handwritten digit dataset. These features demonstrate the great potential of graphene plasmonic devices for future smart artificial vision systems.

关键词： graphene plasmon ferroelectric frequency selective surface artificial vision system