检索结果-南通市图书馆

Fabrication of Molecularly imprinted Electrospun Nanofibers with Mono-amidoxime Functional Ligand for Efficient Decontamination of Toxic Organophosphates

引用

Chinese Journal of Polymer Science 2024年第4期42卷 446-456页

作者： Lan Wang peng Jiang ya-Lin Niu Jun-peng Cao Tian-Ying Guo Key Laboratory of Functional Polymer Materials Ministry of EducationInstitute of Polymer ChemistryCollege of Chemistry and Frontier Science Center for the Creation of New Organic SubstancesNankai UniversityTianjin300071China

There is an urgent imperative to discover practical and efficacious artificial catalysts for the expeditious decontamination of toxic organophosphates. Herein, we propose a novel molecularly imprinted approach utilizing electrospun fiber scaffolds. Specifically, an amidoxime-based functional polymer (PMAOX) has been synthesized, which contains amidoxime groups that can act as nucleophiles and ligands for the formation of catalytic active sites. This polymer was blended with polyacrylonitrile (PAN), a well-processable material, to prepare a nanofiber mat using electrospinning techniques. Then, the amidoxime side groups on fiber surface were further cross-linked after the molecular coordination of templates to complete the molecularly imprinting process. This approach can not only enhance the content of functional molecularly imprinted polymers without affecting structural stability, but also combines surface Mi technology to fully expose and leverage the advantages of active sites. The as prepared molecularly imprinted electrospun nanofibers MiF-Zn-PMAOX/PAN-6/4 catalyzes the degradation of paraoxon with a half-life of 32 min, and MiF-Ag-PMAOX/PAN catalyzes the degradation of parathion with a half-life of 18 min. The maximum catalytic rate evidence rate enhancements nearly 3700-fold of the self-hydrolysis. Thus, the mono-amidoxime based molecularly imprinted fibers demonstrate the versatility and superiority as self-detoxifying for organophosphates.

关键词： Organophosphateshydrolysis Electrospinning Molecular imprinting

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Fabricating functionally graded Fe-Cr-Co permanent magnetic alloys via laser powder bed fusion

引用

Journal of iron and Steel Research international 2024年第3期31卷 729-737页

作者： ya-zhou He ya-qing Hou peng Shen Hao Zhang Dong Zhou Hang Su Central iron and Steel Research institute Co. Ltd.Beijing 100081China Material Digital R&D Center China Iron and Steel Research Institute Group Co.Ltd.Beijing 100081China

Laser powder bed fusion(LPBF)in-situ alloying technology offers the possibility to construct gradient materials with varied structures and *** graded Fe-Cr-Co permanent magnetic alloys were fabricated by LPBF and in-situ alloying mixed powders of Fe,Cr,and Co *** effects of different Fe,Cr and Co contents on the microstructure,magnetic properties and hardness of Fe-Cr-Co alloys prepared by LPBF were *** as-built Fe-Cr-Co alloys present a single body-centered-cubic phase and have a homogeneous distribution of *** mechanical properties and magnetic properties of the compositionally graded sample show a gradient *** the increase in Cr content,the Vickers hardness of the sample increases,and the saturation magnetization of the sample *** optimal magnetic properties in an isotropic state are given as coercivity HcB=21.65 kA/m,remanence Br=0.70 T and energy product(BH)_(max)=5.35 kJ/m^(3),which are comparable to or higher than the reported magnetic properties in an isotropic state prepared by traditional powder *** in-situ alloying technology has the potential to further explore Fe-Cr-Co magnetic materials,such as those consisting of multiple or more constituent elements,and to maximize the compositional flexibility of magnetic materials.

关键词： Fe-Cr-Co alloy Laser powder bed fusion in-situ alloying Functional material Magnetic property

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Sex-biased adaptation shapes uniparental gene pools in Tibetans

引用

Science China(Life Sciences) 2024年第3期67卷 611-613页

作者： Min-Sheng peng ya-Ping Zhang State Key Laboratory of Genetic Resources and Evolution Kunming Institute of ZoologyChinese Academy of SciencesKunming 650201China KiZ-CUHK Joint Laboratory of Bioresources and Molecular Research in Common Diseases Kunming Institute of ZoologyChinese Academy of SciencesKunming 650201China Kunming College of Life Science University of Chinese Academy of SciencesKunming 650204China State Key Laboratory for Conservation and Utilization of Bio-Resources in Yunnan School of Life SciencesYunnan UniversityKunming 650091China

During the past two decades, a series of archaeological and genetic investigations substantially improve our perception of the hominin settlement of the Tibetan Plateau(Zhang et al., 2022). in addition to the identifi... 详细信息

关键词： Tibetan Plateau altitude

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

influence of secondary lining thickness on mechanical behaviours of double-layer lining in large-diameter shield tunnels

引用

Underground Space 2024年第5期18卷 130-150页

作者： Shimin Wang Xuhu He Xiaoyu peng ya Wang Zhengxin Li Zihan Song Key Laboratory of Transportation Tunnel Engineering Ministry of EducationSouthwest Jiaotong UniversityChengdu 610031China School of Civil Engineering Southwest Jiaotong UniversityChengdu 610031China

in large-diameter shield tunnels,applying the double-layer lining structure can improve the load-bearing properties and maintain the stability of segmental *** secondary lining thickness is a key parameter in the design of a double lining structure,which is worth being *** on an actual large-diameter shield tunnel,loading model tests are carried out to investigate the effect of the secondary lining thickness on the mechanical behaviours of the double lining *** test results show that within the range of secondary lining thicknesses discussed,the load-bearing limit of the double-layer lining increases with growing secondary lining *** a passive support,the secondary lining acts as an auxiliary load-bearing structure by contacting the *** changes in secondary lining thickness have a significant effect on the contact state between the segment and secondary lining,with both the contact pressure level and the contact area between the two *** double-layer lining structures in large-diameter shield tunnels,it is proposed that the stiffness of the secondary lining needs to be matched to the stiffness of the segment,as this allows them to have a coordinated deformation and a good joint load-bearing effect.

关键词： Large-diameter shield tunnels Double-layer lining structure Secondary lining thickness Stiffness matching Similar model test

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Modulating charge separation and transfer for high-performance photoelectrodes via built-in electric field

引用

international Journal of Minerals,Metallurgy and Materials 2024年第5期31卷 1126-1146页

作者： Houyan Cheng peng Liu Yuntao Cui Ru ya Yuxiang Hu Jinshu Wang Key Laboratory of Advanced Functional Materials of Education Ministry of China Faculty of Engineering and ManufacturingBeijing University of TechnologyBeijing 100124China Key Laboratory of Cryogenic Science and Technology and Beijing Key Lab of Cryo-Biomedical Engineering Technical Institute of Physics and ChemistryChinese Academy of SciencesBeijing 100190China inner Mongolia Academy of Science and Technology Hohhot 010020China

Constructing a built-in electric field has emerged as a key strategy for enhancing charge separation and transfer,thereby improving photoelectrochemical ***,considerable efforts have been devoted to this *** review systematically summarizes the impact of built-in electric fields on enhancing charge separation and transfer mechanisms,focusing on the modulation of built-in electric fields in terms of depth and ***,mechanisms and tuning strategies for built-in electric fields are ***,the state-of-the-art works regarding built-in electric fields for modulating charge separation and transfer are summarized and categorized according to surface and interface ***,current strategies for constructing bulk built-in electric fields in photoelectrodes are explored,and insights into future developments for enhancing charge separation and transfer in high-performance photoelectrochemical applications are provided.

关键词： photoelectrochemical water splitting bulk built-in electric field cation intercalation charge separation and transfer

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Numerical simulation study on the mold strength of magnetic mold casting based on a coupled electromagnetic-structural method

引用

China Foundry 2024年第5期21卷 577-587页

作者： Wei-li peng Jian-hua Zhao Cheng Gu ya-jun Wang College of Materials Science and Engineering Chongqing UniversityChongqing 400045China National Engineering Research Center for Magnesium Alloys Chongqing UniversityChongqing 400044China National Key Laboratory of Advanced Casting Technologies Chongqing UniversityChongqing 400044China

The properties of the magnetic mold in magnetic mold casting directly determine the quality of the final cast *** this study,the magnetic mold properties in magnetic mold casting,were studied utilizing a coupled electromagnetic-structural method through numerical *** study investigated key factors including equivalent stress,the distribution of tensile and compressive stresses,and the area ratio of tensile *** compared molds made entirely of magnetic materials with those made partially of magnetic *** results indicate that as current increases from 4 A to 8 A,both the initial magnetic mold and the material-replaced magnetic mold initially show an increasing trend in equivalent stress,tensile-compressive stress,and the area ratio of tensile stress,peaking at 6 A before *** material replacement,the area ratio of tensile stress at 6 A decreases to 19.84%,representing a reduction of 29.72%.Magnetic molds comprising a combination of magnetic and non-magnetic materials exhibit sufficient strength and a reduced area ratio of tensile stress compared to those made entirely from magnetic *** study provides valuable insights for optimizing magnetic mold casting processes and offers practical guidance for advancing the application of magnetic molds.

关键词： magnetic mold casting coupled electromagnetic-structural method numerical simulation stress analysis

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Regulation of rhizosphere microenvironment by rice husk ash for reducing the accumulation of cadmium and arsenic in rice

引用

Journal of Environmental Sciences 2024年第2期136卷 1-10页

作者： Yi Jiang ya Liu Xuantao Yi peng Zeng Bohan Liao Hang Zhou Jiaofeng Gu College of Environmental Science and Engineering Central South University of Forestry and TechnologyChangsha 410004China Hunan Engineering Laboratory for Control of Rice Quality and Safety Changsha 410004China

it is important to reduce Cd and As content in brown rice in contaminated paddy *** conducted research on the effects of rice husk ash (RHA) on the Cd and As in the rhizosphere microenvironment (soil,porewater,and iron plaque) and measured the Cd,As,and Si content in rice *** main elements in RHA were Si (29.64%) and O (69.17%),which had the maximum adsorption capacity for Cd was 42.49 mg/kg and for As was 18.62 mg/*** pH and available Si content increased,while soil available Cd and As decreased following application of 0.5%–2%*** promote the transformation of Cd to insoluble fraction,while As was transformed from a poorly soluble form to a more active *** reduced Cd content and increased Si content in porewater,and reduced As only at the later rice growth *** increased the amount of iron plaque,thereby decreasing the Cd content in iron plaque,while increased the As content in *** and inorganic As content in brown rice were decreased,to 0.31 mg/kg and 0.18 mg/kg,*** decrease of Cd in brown rice was due to the decrease of Cd mobility in soil,thereby reducing root accumulation,while the decrease of As in brown rice was affected by the transport from roots to ***,RHA can be considered as a safe and efficient in-situ remediation amendment for Cd and As co-contaminated paddy soil.

关键词： Rice husk ash(rha) Cadmium Arsenic Silicon Rice Soil

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Structural transformation from Waugh-type to Keggin-type polyoxomolybdate-based crystalline material for photo/electrocatalysis

引用

Rare Metals 2024年第5期43卷 2241-2250页

作者： Pei-Sen Wang Zi-Tong Wang ya-ya Tan peng Chen Xue-Cheng Zhang Lu-Nan Zhang Yong-Ge Wei Lu-Bin Ni School of Chemistry and Chemical Engineering Yangzhou UniversityYangzhou 225002China Key Lab of Organic Optoelectronics and Molecular Engineering of Ministry of Education Department of ChemistryTsinghua UniversityBeijing 100084China State Key Laboratory of Natural and Biomimetic Drugs Peking UniversityBeijing100191China

An inorganicDorganic hybrid crystalline material(SiMo_(12)O_(40))[Cu(2,2'-bipy)_(2)]_(2)·2H_(2)O(Complex 1,2,2'-bipy=2,2'-bipyridine)was synthesized for the first time by using 2,2'-bipy and transition metal copper to convert Waugh-type polyoxometalate[MnMo_(9)O_(3)_(2)]_(6-)into a Keggin polyoxometalate structure[SiMo_(12)O_(40)]^(4-)under hydrothermal conditions in glass *** crystal tests and a series of characterizations were carried out on Complex *** structure of Complex 1 is composed of[SiMo_(12)O_(40)]^(4-)and[Cu^(Ⅱ)(2,2'-bipy)_(2)]^(2+).The five-coordinated Cu is connected to two 2,2'-bipy through CuDN bonds,forming an approximately square ***,Complex 1 exhibited good photocatalytic performance for methylene blue degradation and electrocatalytic nitrite reduction properties simultaneously.

关键词： Polyoxometalates inorganic-organic hybrid materials Photocatalytic Electrocatalytic

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Promoting electrocatalytic nitrogen reduction to ammonia via dopant boron on two-dimensional materials

引用

Rare Metals 2024年第10期43卷 5117-5125页

作者： ya-Hui Cui Wen-Cheng Ouyang Ai-Jun Gao Chang-Yuan Yu Li-peng Zhang State Key Laboratory of Organic-inorganic Composites College of Chemical EngineeringBeijing University of Chemical Technology College of Materials Science and Engineering Beijing University of Chemical Technology College of Life Science and Technology Beijing University of Chemical Technology

Electrocatalytic nitrogen reduction reaction(NRR) is a key process for producing energy efficient and environment friendly ammonia. Boron-doped two-dimensional materials are highly promising as NRR ***, the interaction between doped boron and matrix materials on NRR catalytic performance is still unclear,which is limiting the development of catalysts containing boron for NRR. Here, NRR on different boron-doped twodimensional(2D) materials was explored by first principle theory. it is found that adsorption energy of intermediate*NNH(E*NNH) can be used as a descriptor to characterize the catalytic activity for NRR. Boron-adsorbed black phosphorus(B-BP) is demonstrated showing excellent NRR catalytic activity and suppressing hydrogen evolution reaction. it is disclosed that the excellent catalytic performance of boron-doped structures comes from a proper quantitatively electron transfer(0.8e) between nitrogen in*NNH and the active site boron atom. This work not only established a descriptor for NRR catalytic activity on B-doped 2D materials, but also screened out a potential NRR catalyst. More importantly, the intrinsic reason and mechanism of high catalytic activity of boron-doped structures were proposed. This work provides a design principle for exploring high-performance NRR electrocatalysts containing boron.

关键词： Boron-doped two-dimensional materials Density functional theory Descriptor Electrocatalytic nitrogen reduction reaction

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Pollution source identification methods and remediation technologies of groundwater: A review

引用

China Geology 2024年第1期7卷 125-137页

作者： ya-ci Liu Yu-hong Fei ya-song Li Xi-lin Bao peng-wei Zhang Fujian Provincial Key Laboratory of Water Cycling and Eco-Geological Processes Institute of Hydrogeology and Environmental GeologyChinese Academy of Geological SciencesXiamen 361000China Key Laboratory of Water and Soil Resources Conservation and Restoration in the Middle and Lower Reaches of Yellow River Basin MNRZhengzhou 450016China

Groundwater is an important source of drinking *** pollution severely endangers drinking water safety and sustainable social *** the case of groundwater pollution,the top priority is to identify pollution sources,and accurate information on pollution sources is the premise of efficient ***,an appropriate pollution remediation scheme should be developed according to information on pollution sources,site conditions,and economic *** methods for identifying pollution sources mainly include geophysical exploration,geochemistry,isotopic tracing,and numerical *** these identification methods,only the numerical modeling can recognize various information on pollution sources,while other methods can only identify a certain aspect of pollution *** remediation technologies of groundwater can be divided into in-situ and ex-situ remediation technologies according to the remediation *** in-situ remediation technologies enjoy low costs and a wide remediation range,but their remediation performance is prone to be affected by environmental conditions and cause secondary *** ex-situ remediation technologies boast high remediation efficiency,high processing capacity,and high treatment concentration but suffer high *** methods for pollution source identification and remediation technologies are applicable to different *** achieve the expected identification and remediation results,it is feasible to combine several methods and technologies according to the actual hydrogeological conditions of contaminated sites and the nature of ***,detailed knowledge about the hydrogeological conditions and stratigraphic structure of the contaminated site is the basis of all work regardless of the adopted identification methods or remediation technologies.

关键词： Groundwater pollution identification of pollution sources Geophysical exploration identification Geochemistry identification isotopic tracing Numerical modeling Remediation technology Hydrogeological conditions Hydrogeological survey engineering

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：