检索结果-南通市图书馆

Defence Technology（防务技术） 2024年第3期33卷 209-221页

作者： Yifan li Hongtao yang Aifeng Jiang Dongming Song Yanchun li department of Chemical engineering Nanjing University of Science and TechnologyNanjing 210097China Xi'an Modern Chemistry Research Institute Xi'an 710065China Southwest Technology and engineering Research Institute Chongqing 400039China

Mg-Gd alloy particle has exhibited its unique combustion properties as the fuel of Mg/Teflon/Viton(MTV).Mg-Gd alloy/Teflon/Viton(MGTV)could burn at lower ambient pressure than *** further investigate the reaction of MGTV in air,it was investigated via thermo gravity-differential scanning calorimetry(TG-DSC).Meanwhile,the morphologies and element distributions on the alloy surface during the reaction of MGTV in air were investigated via scanning electronic microscope-mapping-electronic differential ***,a similar experimental protocol on the Mg-Gd alloy particle during oxidation was also *** results showed that owning to a protective oxide shell,the onset oxidation temperature of Mg-Gd alloy is higher than ***,the onset oxidation temperature of the exceeded Mg-Gd alloy in MGTV is significantly lower than that of the exceeded Mg in *** was due to the existence of GdOF,which could significantly lower the oxidation temperature of the exceeded ***,a possible reaction mechanism was *** fascinating oxidation properties of Mg-Gd alloy suggested its promising applications in energetic materials.

关键词： Mg-Gd alloy Energetic materials Morphology EDS GdOF

Low-Frequency Stability Analysis of Power electronic Traction Transformer Based Train-Network System

在线全文

学校读者我要写书评

暂无评论

CSEE Journal of Power and Energy Systems 2024年第4期10卷 1608-1617页

作者： Yi Hong yang li Zhikang Shuai Hanyu yang College of Electrical and information engineering Hunan University and the Advanced Energy Technology Center of State Grid Shanghai Energy Interconnection Research Institute Co.Ltd.Shanghai 201203China College of Electrical and information engineering Hunan UniversityChangsha 410082China College of Electrical engineering and Controal science in Nanjing Tech University Nanjing 211816China

Power electronic traction transformers(PETTs)will be increasingly applied to locomotives in the future for their small volume and light ***,similar to conventional trains,PETTs behave as constant power loads and may cause low-frequency oscillation(LFO)to the train-network *** solve this issue,a mathematical model of the PETT is firstly proposed and verified based on the extended describing function(EDF)method in this *** the proposed model,the LLC converter is simplified to an equivalent circuit consisting of a capacitor and a resistor in *** is further demonstrated that the model can apply to various LLC converters with different topologies and ***,when the parameter differences between cells are not obvious,the PETT can be simplified to a single-phase rectifier(i.e.,conventional train)by equivalent *** on the model of PETT,the system low-frequency stability and influential factors are analyzed by using the generalized Nyquist ***,the correctness and accuracy of theoretical analyses are validated by off-line and hardware-in-the-loop simulation results.

关键词： Extended describing function method impedance model low-frequency oscillation power electronic traction transformer train-network system

High-performance flexible semiconductor fibres for multi-scenario communication applications

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

science China Materials 2024年第7期67卷 2363-2364页

作者： Qinghui lin yang li Guozhen Shen School of information science and engineering University of JinanJinan 250022China School of Microelectronics Shandong UniversityJinan 250101China School of Integrated Circuits and electronics Beijing Institute of Technology Beijing 100081China

With the advances in the field of flexible fibre technology in recent years,a variety of flexible fibres with different preparation processes have emerged[1,2].However,most of the flexible fibres in the past have structural breaks,making them unsuitable for long-term use as wearable fabrics[3,4].Glass semiconductors are widely used in thermally stretched fibres due to their advantages such as controllable fluidity,but they suffer from electronic defects compared with crystalline semi conductors in electronic semiconductors such as silicon(Si)and germanium(Ge)[5].Obviously,the semiconductor component in flexible optic fibres is a key component in regulating their mechanical and electrical properties[6].

关键词： wear fibres fibre

Asynchronous Learning-Based Output Feedback Sliding Mode Control for Semi-Markov Jump Systems: A Descriptor Approach

在线全文

学校读者我要写书评

暂无评论

IEEE/CAA Journal of Automatica Sinica 2024年第6期11卷 1358-1369页

作者： Zheng Wu Yiyun Zhao Fanbiao li Tao yang yang Shi Weihua Gui School of Automation Central South UniversityChangsha 410083China Power electronics Machines and Control GroupThe University of NottinghamNottingham NG72RDUK department of Mechanical engineering University of VictoriaVictoria BC V8W 3P6Canada IEEE

This paper presents an asynchronous output-feed-back control strategy of semi-Markovian systems via sliding mode-based learning *** with most literature results that require exact prior knowledge of system state and mode information,an asynchronous output-feedback sliding sur-face is adopted in the case of incompletely available state and non-synchronization *** holonomic dynamics of the sliding mode are characterized by a descriptor system in which the switching surface is regarded as the fast subsystem and the system dynamics are viewed as the slow *** upon the co-occurrence of two subsystems,the sufficient stochastic admissibility criterion of the holonomic dynamics is derived by utilizing the characteristics of cumulative distribution ***,a recursive learning controller is formulated to guarantee the reachability of the sliding manifold and realize the chattering reduction of the asynchronous switching and sliding ***,the proposed theoretical method is substantia-ted through two numerical simulations with the practical contin-uous stirred tank reactor and F-404 aircraft engine model,respectively.

关键词： Asynchronous switching learning-based control output feedback semi-Markovian jump systems sliding mode con-trol(SMC).

Effect of Heat Treatment on Microstructure and Mechanical Behavior of Cu-Bearing 316L Stainless Steel Produced by Selective Laser Melting

在线全文

学校读者我要写书评

暂无评论

Acta Metallurgica Sinica(English Letters) 2024年第1期37卷 169-180页

作者： Huan yang Ying liu Jianbo Jin Kunmao li Junjie yang lingjian Meng Chunbo li Wencai Zhang Shengfeng Zhou Sino-German College of Intelligent Manufacturing Shenzhen Technology UniversityShenzhen518118China Institute of Advanced Wear and Corrosion Resistance and Functional Materials Jinan UniversityGuangzhou510632China department of Orthopedics First Affiliated Hospital of Jinan UniversityGuangzhou510632China

Cu-bearing stainless steels(SSs)with high strength,excellent plasticity,and effective antimicrobial properties hold significant potential for applications in the marine *** this study,Cu-bearing SSs with copper ranging from 0 to 6.0 wt%were successfully prepared using selective laser melting(SLM)*** the Cu-bearing SSs with different copper contents,the effect of heat treatment on the microstructural and mechanical behaviors was studied *** observations revealed that the subgrain size of Cu-bearing SSs increased with heat treatment at 500℃ and 700℃ for 6 ***,the tensile strength and elongation increased after the heat treatment temperature due to the combined effect of dislocations,twins,andε-Cu precipitated ***,after heat treatment at 700℃,the SLM4.5Cu sample exhibited an abnormal rise in tensile strength and *** finding suggests that the diffusion strengthening caused byε-Cu precipitates exceeded the stacking fault ***,the tensile strength and elongation reached 693.32 MPa and 56.94%,*** work provides an efficient approach for preparing Cu-bearing SSs with exceptional strength and plasticity.

关键词： Selective laser melting Cu-bearing stainless steel(SS) Heat treatment Mechanical properties

Management of triplet excitons transition:fine regulation of Förster and dexter energy transfer simultaneously

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

light(science & Applications) 2024年第2期13卷 302-315页

作者： Jiaqiang Wang Yujie yang Xinnan Sun Xiaoning li liyao Zhang Zhen li Institute of Molecular Aggregation science Tianjin UniversityTianjin300072China School of life sciences Tianjin UniversityTianjin300072China Hubei Key Lab on Organic and Polymeric Opto-electronic Materials Department of ChemistryWuhan UniversityWuhan430072China Wuhan National Laboratory for Optoelectronics Huazhong University of Science and TechnologyWuhan430072China Joint School of National University of Singapore Tianjin UniversityInternational Campus of Tianjin UniversityBinhai New CityFuzhou350207China

Understanding and management of triplet excitons transition in the same molecule remain a great ***,for the first time,by host engineering,manageable transitions of triplet excitons in a naphthalimide derivative NDOH were achieved,and monitored through the intensity ratio(ITADF/IRTP)between thermally activated delayed fluorescence(TADF)and room-temperature phosphorescence(RTP).Energy differences between lowest triplet excited states of host and guest were changed from 0.03 to 0.17 eV,and ITADF/IRTP of NDOH decreased by 200 times,thus red shifting the afterglow *** was proposed that shorter conjugation length led to larger band gaps of host materials,thus contributing to efficient Dexter and inefficient Förster energy ***,no transition to singlet state and only strongest RTP with quantum yield of 13.9%could be observed,when PBNC with loosest stacking and largest band gap acted as *** work provides novel insight for the management and prediction of triplet exciton transitions and the development of smart afterglow materials.

关键词： materials transition transitions

Label Recovery and Trajectory Designable Network for Transfer Fault Diagnosis of Machines With Incorrect Annotation

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

IEEE/CAA Journal of Automatica Sinica 2024年第4期11卷 932-945页

作者： Bin yang Yaguo Lei Xiang li Naipeng li Asoke K.Nandi the Key Laboratory of Education Ministry for Modern Design and Rotor-Bearing System the School of Mechanical EngineeringXi’an Jiaotong UniveristyXi’an 710049 the Hunan Provincial Key Labortory of Health Maintenance for Mechanical Equipment Hunan Univeristy of Science and TechnologyXiangtan 411201China the Key Laboratory of Education Ministry for Modern Design and Rotor-Bearing System Xi’an Jiaotong UniveristyXi’an 710049China the department of electronic and Electrical engineering Brunel University LondonUxbridge UB83PHUK

The success of deep transfer learning in fault diagnosis is attributed to the collection of high-quality labeled data from the source ***,in engineering scenarios,achieving such high-quality label annotation is difficult and *** incorrect label annotation produces two negative effects:1)the complex decision boundary of diagnosis models lowers the generalization performance on the target domain,and2)the distribution of target domain samples becomes misaligned with the false-labeled *** overcome these negative effects,this article proposes a solution called the label recovery and trajectory designable network(LRTDN).LRTDN consists of three ***,a residual network with dual classifiers is to learn features from cross-domain ***,an annotation check module is constructed to generate a label anomaly indicator that could modify the abnormal labels of false-labeled samples in the source *** the training of relabeled samples,the complexity of diagnosis model is reduced via semi-supervised ***,the adaptation trajectories are designed for sample distributions across *** ensures that the target domain samples are only adapted with the pure-labeled *** LRTDN is verified by two case studies,in which the diagnosis knowledge of bearings is transferred across different working conditions as well as different yet related *** results show that LRTDN offers a high diagnosis accuracy even in the presence of incorrect annotation.

关键词： Deep transfer learning domain adaptation incorrect label annotation intelligent fault diagnosis rotating machines

Reducing idleness in financial cloud services via multi-objective evolutionary reinforcement learning based load balancer

在线全文

学校读者我要写书评

暂无评论

science China(information sciences) 2024年第2期67卷 20-40页

作者： Peng yang Laoming ZHANG Haifeng liU Guiying li department of Statistics and Data science Southern University of Science and Technology Guangdong Provincial Key Laboratory of Brain-Inspired Intelligent Computation Department of Computer Science and EngineeringSouthern University of Science and Technology Academy for Advanced Interdisciplinary Studies Southern University of Science and Technology Guangdong OPPO Mobile Telecommunications Corp. Ltd Research Institute of Trustworthy Autonomous Systems Southern University of Science and Technology

In recent years, various companies have started to shift their data services from traditional data centers to the cloud. One of the major motivations is to save on operational costs with the aid of cloud elasticity. This paper discusses an emerging need from financial services to reduce the incidence of idle servers retaining very few user connections, without disconnecting them from the server side. This paper considers this need as a bi-objective online load balancing problem. A neural network based scalable policy is designed to route user requests to varied numbers of servers for the required elasticity. An evolutionary multi-objective training framework is proposed to optimize the weights of the policy. Not only is the new objective of idleness reduced by over 130% more than traditional industrial solutions, but the original load balancing objective itself is also slightly improved. Extensive simulations with both synthetic and real-world data help reveal the detailed applicability of the proposed method to the emergent problem of reducing idleness in financial services.

关键词： evolutionary reinforcement learning evolutionary multi-objective optimization load balance cloud computing

A comprehensive review on microchannel heat sinks for electronics cooling

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

International Journal of Extreme Manufacturing 2024年第2期6卷 133-162页

作者： Zhi-Qiang Yu Mo-Tong li Bing-yang Cao Key Laboratory for Thermal science and Power engineering of Ministry of Education Department of Engineering MechanicsTsinghua UniversityBeijing 100084People’s Republic of China

The heat generation of electronic devices is increasing dramatically,which causes a serious bottleneck in the thermal management of electronics,and overheating will result in performance deterioration and even device *** the development of micro-machining technologies,the microchannel heat sink(MCHS)has become one of the best ways to remove the considerable amount of heat generated by high-power *** has the advantages of large specific surface area,small size,coolant saving and high heat transfer *** paper comprehensively takes an overview of the research progress in MCHSs and generalizes the hotspots and bottlenecks of this *** heat transfer mechanisms and performances of different channel structures,coolants,channel materials and some other influencing factors are ***,this paper classifies the heat transfer enhancement technology and reviews the related studies on both the single-phase and phase-change flow and heat *** comprehensive review is expected to provide a theoretical reference and technical guidance for further research and application of MCHSs in the future.

关键词： microchannel heat sink thermal management of electronics microscale heat transfer heat transfer enhancement