检索结果-南通市图书馆

Alloy solidification: Assessment and improvement of an easy-to-apply model

Journal of Materials Science & Technology 2022年第35期130卷 1-11页

作者： H.Liu y.Liu S.L.Lu y.Zhang H.chen y.chen M.Qian School of Materials Science and Engineering Southwest Jiaotong UniversityChengdu 610031China Centre for Additive Manufacturing School of EngineeringRMIT UniversityMelbourneVIC 3000Australia School of Materials Science and Engineering Sichuan UniversityChengdu 610065China

It has been a central task of solidification research to predict solute microsegregation. Apart from the Lever rule and the Scheil-Gulliver equation, which concern two extreme cases, a long list of microsegregation models has been proposed. However, the use of these models often requires essential experimental input information, e.g., the secondary dendrite arm spacing(λ), cooling rate( ˙T) or actual solidification range(△T). This requirement disables these models for alloy solidification with no measured values for λ,˙T and △T. Furthermore, not all of these required experimental data are easily obtainable. It is therefore highly desirable to have an easy-to-apply predictive model that is independent of experimental input,akin to the Lever rule or Scheil-Gulliver model. Gong, chen, and co-workers have recently proposed such a model, referred to as the Gong-chen model, by averaging the solid fractions(f_(s)) of the Lever rule and Scheil-Gulliver model as the actual solid fraction. We provide a systematic assessment of this model versus established solidification microsegregation models and address a latent deficiency of the model, i.e.,it allows the Lever rule solid fraction fsto be greater than one(f_(s)> 1). It is shown that the Gong-chen model can serve as a generic model for alloy solidification until fsreaches about 0.9, beyond which(f_(s)> 0.9) its applicability is dictated by both the equilibrium solute partition coefcient(k) and the solute diffusion coefcient in the solid(Ds), which has been tabulated in detail.

关键词： Solidification Microsegregation Solute Back diffusion Eutectic formation

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

STCF conceptual design report (Volume 1): Physics & detector

引用

Frontiers of physics 2024年第1期19卷 1-154页

作者： M.Achasov X.C.Ai L.P.An R.Aliberti Q.An X.Z.Bai y.Bai O.Bakina A.Barnyakov V.Blinov V.Bobrovnikov D.Bodrov A.Bogomyagkov A.Bondar I.Boyko Z.H.Bu F.M.Cai H.Cai J.J.Cao Q.H.Cao X.Cao Z.Cao Q.Chang K.T.Chao D.y.chen H.chen H.X.chen J.F.chen K.chen L.L.chen P.chen S.L.chen S.M.chen S.chen S.P.chen W.chen X.chen X.F.chen X.R.chen y.chen y.Q.chen H.y.cheng J.cheng S.cheng T.G.cheng J.P.Dai L.y.Dai X.C.Dai D.Dedovich A.Denig I.Denisenko J.M.Dias D.Z.Ding L.y.Dong W.H.Dong V.Druzhinin D.S.Du y.J.Du Z.G.Du L.M.Duan D.Epifanov y.L.Fan S.S.Fang Z.J.Fang G.Fedotovich C.Q.Feng X.Feng y.T.Feng J.L.Fu J.Gao y.N.Gao P.S.Ge C.Q.Geng L.S.Geng A.Gilman L.Gong T.Gong B.Gou W.Gradl J.L.Gu A.Guevara L.C.Gui A.Q.Guo F.K.Guo J.C.Guo J.Guo y.P.Guo Z.H.Guo A.Guskov K.L.Han L.Han M.Han X.Q.Hao J.B.He S.Q.He X.G.He y.L.He Z.B.He Z.X.Heng B.L.Hou T.J.Hou y.R.Hou C.y.Hu H.M.Hu K.Hu R.J.Hu W.H.Hu X.H.Hu y.C.Hu J.Hua G.S.Huang J.S.Huang M.Huang Q.y.Huang W.Q.Huang X.T.Huang X.J.Huang y.B.Huang y.S.Huang N.Hüsken V.Ivanov Q.P.Ji J.J.Jia S.Jia Z.K.Jia H.B.Jiang J.Jiang S.Z.Jiang J.B.Jiao Z.Jiao H.J.Jing X.L.Kang X.S.Kang B.C.Ke M.Kenzie A.Khoukaz I.Koop E.Kravchenko A.Kuzmin y.Lei E.Levichev C.H.Li C.Li D.y.Li F.Li G.Li G.Li H.B.Li H.Li H.N.Li H.J.Li H.L.Li J.M.Li J.Li L.Li L.Li L.y.Li N.Li P.R.Li R.H.Li S.Li T.Li W.J.Li X.Li X.H.Li X.Q.Li X.H.Li y.Li y.y.Li Z.J.Li H.Liang J.H.Liang y.T.Liang G.R.Liao L.Z.Liao y.Liao C.X.Lin D.X.Lin X.S.Lin B.J.Liu C.W.Liu D.Liu F.Liu G.M.Liu H.B.Liu J.Liu J.J.Liu J.B.Liu K.Liu K.y.Liu K.Liu L.Liu Q.Liu S.B.Liu T.Liu X.Liu y.W.Liu y.Liu y.L.Liu Z.Q.Liu Z.y.Liu Z.W.Liu I.Logashenko y.Long C.G.Lu J.X.Lu N.Lu Q.F.Lü y.Lu y.Lu Z.Lu P.Lukin F.J.Luo T.Luo X.F.Luo y.H.Luo H.J.Lyu X.R.Lyu J.P.Ma P.Ma y.Ma y.M.Ma F.Maas S.Malde D.Matvienko Z.X.Meng R.Mitchell A.Nefediev y.Nefedov S.L.Olsen Q.Ouyang P.Pakhlov G.Pakhlova X.Pan y.Pan E.Passemar y.P.Pei H.P.Peng L.Peng X.y.Peng X.J.Peng K.Peters S.Pivovarov E.Pyata B.B.Qi y.Q.Qi W.B.Qian y.Qian C.F.Qiao J.J.Qin J.J.Qin L.Q.Qin X.S.Qin T.L.Qiu J.Rademacker C.F.Redmer H.y.Sang Anhui University Hefei 230039China Beihang University Beijing 100191China Budker Institute of Nuclear Physics Novosibirsk 630090Russia CAS Key Laboratory of Theoretical Physics Institute of Theoretical PhysicsChinese Academy of SciencesBeijing 100190China Cavendish Laboratory University of CambridgeJJ Thomson AveCambridge CB30HEUnited Kingdom Central China Normal University Wuhan 430079China Central South University Changsha 410083China China University of Geosciences Wuhan 430074China China University of Mining and Technology Xuzhou 221116China École Polytechnique Fédérale de Lausanne(EPFL) LausanneSwitzerland Fudan University Shanghai 200433China Goethe University Frankfurt D-60325 Frankfurt am MainGermany Guangxi Normal University Guilin 541004China Guangxi Uninversity Nanning 530004China Hangzhou Institute for Advanced Study UCASHangzhou 310024China Hebei Normal University Shijiazhuang 050024China Hebei University Baoding 071002China Hefei University of Technology Hefei 230601China Helmholtz Institute Mainz Staudinger Weg 18D-55099 MainzGermany Henan Normal University Xinxiang 453007China Henan University Kaifeng 475004China High Energy Physics Center Chung-Ang UniversitySeoul 06974Korea Higher School of Economy 11 Pokrovsky Bulvar Moscow 109028Russia Huangshan University Huangshan 245000China Hubei University of Automotive Technology Shiyan 442002China Hunan Normal University Changsha 410081China Hunan University of Science and Technology Xiangtan 411201China Hunan University Changsha 410082China Indiana University BloomingtonIndiana 47405USA Inner Mongolia University Hohhot 010021China Institute of Advanced Science Facilities Shenzhen 518107China Institute of High Energy Physics Chinese Academy of SciencesBeijing 100049China Institute of Modern Physics Chinese Academy of SciencesLanzhou 730000China Institute of Physics Academia SinicaTaipeiTaiwan 11529China Institute of Theoretical Physics Chinese Academy of SciencesBeijing 100190China Jilin University Changch

The superτ-charm facility(STCF)is an electron–positron collider proposed by the Chinese particle physics community.It is designed to operate in a center-of-mass energy range from 2 to 7 GeV with a peak luminosity of 0.5×10^(35) cm^(–2)·s^(–1) or higher.The STCF will produce a data sample about a factor of 100 larger than that of the presentτ-charm factory—the BEPCII,providing a unique platform for exploring the asymmetry of matter-antimatter(charge-parity violation),in-depth studies of the internal structure of hadrons and the nature of non-perturbative strong interactions,as well as searching for exotic hadrons and physics beyond the Standard Model.The STCF project in China is under development with an extensive R&D program.This document presents the physics opportunities at the STCF,describes conceptual designs of the STCF detector system,and discusses future plans for detector R&D and physics case studies.

关键词： electron–positron collider tau-charm region high luminosity STCF detector conceptual design

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Forging strength-ductility unity in a high entropy steel

引用

Journal of Materials Science & Technology 2022年第18期113卷 158-165页

作者： S.J.Tsianikas y.chen J.Jeong S.Zhang Z.Xie School of Mechanical Engineering The University of AdelaideSA 5005Australia Centre for Advanced Thin Film Materials and Devices Faculty of Materials and EnergySouthwest UniversityChongqing 400715China Max-Planck-Institut für Eisenforschung Max-Planck-Straße 1Düsseldorf 40237Germany

Fe_(72.4)Co_(13.9)Cr_(10.4)Mn_(2.7)B_(0.34)high entropy steel was prepared by magnetron sputtering.The alloy exhibits a high yield strength of 2.92±0.36 GPa while achieving appreciable plasticity of 13.7±1.9%at the ultimate compressive strength(3.37±0.36 GPa).The distribution of iron and chromium shows an un-usual,characteristic spinodal-like pattern at the nanometer scale,where compositions of Fe and Cr show strong anticorrelation and vary by as much as 20 at.%.The high strength is largely attributable to the compositional modulations,combined with fine grains with body-centered cubic(BCC)crystal structure,as well as grain boundary segregation of interstitial boron.The impressive plasticity is accommodated by the formation and operation of multiplanar,multicharacter dislocation slips,mediated by coherent in-terfaces,and controlled by shear bandings.The excellent strength-ductility combination is thus enabled by a range of distinctive strengthening mechanisms,rendering the new alloy a potential candidate for safety-critical,load-bearing structural applications.

关键词： Deformation mechanisms Micromechanical testing Compositional fluctuations Body-centered cubic High entropy steel

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Towards creep property improvement of selective laser melted Ni-based superalloy IN738LC

引用

Journal of Materials Science & Technology 2022年第17期112卷 301-314页

作者： H.y.Song M.C.Lam y.chen S.Wu P.D.Hodgson X.H.Wu y.M.Zhu A.J.Huang Monash Centre for Additive Manufacturing 15-17 Normanby RdNotting HillVIC 3168Australia Department for of Materials Science and Engineering Monash UniversityClaytonVIC 3800Australia Monash Centre for Electron Microscopy 10 Innovation WalkClaytonVIC 3800Australia Institute for Frontier Materials Deakin UniversityVIC 3216Australia

Nickel-based superalloy IN738LC produced by selective laser melting(SLM)exhibits inferior hightemperature creep properties than its cast counterparts due to relatively smaller grain size,particularly for the plane normal to the building direction.This work studied effects of post heating strategy on the microstructure and especially the grain size to improve the high temperature creep resistance.The asbuilt microstructure exhibited a fine grain size and large quantities of MC carbides that could effectively hinder grain growth.It was found that unconventional two-step heat treatments could lead to substantial grain growth,and the effect is particularly prominent at a specific temperature.The ease of grain growth was explained after classifying the microstructural evolution(boundary carbide transformation)during each heating step and related to the reduced grain boundary pinning force from MC carbides.Creep tests validated the effect of the new heat treatment scheme on the SLM-processed IN738LC at 850℃.An extended creep fracture life(1.5 to 4 times improvement)and lower secondary creep rates were achieved with samples subjected to the newly optimized two-step heat treatment.The complete creep curves are also firstly presented for SLM-IN738LC,confirming the effectiveness of grain growth and highlighting the importance of dedicated heat treatment for SLM superalloys.

关键词： Selective laser melting IN738LC alloy Creep properties Heat treatments Grain structure

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Control of dislocation density maximizing precipitation strengthening effect

引用

Journal of Materials Science & Technology 2022年第32期127卷 133-143页

作者： C.Xu W.J.Dai y.chen Z.X.Qi G.Zheng y.D.Cao J.P.Zhang C.C.Bu G.chen MIIT Key Laboratory of Advanced Metallic and Internetallic Materials Technology Engineering Research Center of Materials Behavior and DesignMinistry of EducationNanjing University of Science and TechnologyNanjing 210094China

The strength-ductility trade-off has been the most challenging problem for structural metals for centuries.Nanoprecipitation strengthening is an ideal approach to enhance the strength without significantly sacrificing the ductility.Stable nanoprecipitates have been successfully acquired by nanostructural design,but the number density of nanoprecipitates cannot be further increased.Researchers attempted to enhance number density by introducing highly potent nucleation sites(e.g.,dislocations).However,there remains controversy over the influence of dislocations on the nucleation and growth of coherent nanoprecipitates with minimized nucleation barrier.Here,Cu-rich nanoprecipitates in an HSLA steel,as a typical type of coherent nanoprecipitates,are investigated.By combining analytical calculation and experiments,we show that dislocations are harmful for the formation of large numbered Cu-rich nanoprecipitates in a certain density range.Insufficient dislocations deprive solute atoms which decrease homogenous precipitation that cannot be compensated by the increase in heterogeneous precipitation.Under such circumstance,Cu-rich nanoprecipitates have smaller number density but larger size and higher fraction of incoherent structures due to rapid Ostwald ripening.As a result,by controlling dislocation density,the yield strength is increased by 24%without obvious loss in ductility as compared with traditional solution-quench-age process.Our work would help to optimize composition and processing routes that fully exploit the nanoprecipitation strengthening effect.

关键词： Cu-rich nanoprecipitates Crystallographic defects Nucleation Structural transformation Ostwald ripening

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Strengthening in gradient TiAl alloys

引用

Journal of Materials Science & Technology 2023年第35期166卷 98-105页

作者： P.Li y.chen X.Liu X.H.Wang F.R.chen Z.X.Qi G.Zheng H.G.Xiang G.chen National Key Laboratory of Advanced Casting Technologies MIIT Key Laboratory of Advanced Metallic and Intermetallic Materials TechnologyEngineering Research Center of Materials Behavior and DesignMinistry of EducationNanjing University of Science and TechnologyNanjing210094China

Gradient structure is emerging as an effective strategy to fabricate metals with remarkable mechanical performance,but have not been verified in intermetallic compounds for high-temperature applications.Through experiments and atomic simulations,we show that a typical intermetallic TiAl alloy with gra-dient structure has a significant strengthening effect both at room temperature and high temperatures.The room-temperature compressive strength of TiAl alloys with gradient grain obtained by additive man-ufacturing is 2.57 GPa,which is∼2.7 times as strong as that with equiaxed grain.The strengthening effect is attributed to more sessile dislocations in gradient structure caused by the intersections of mul-tiple slip systems in gradient grain.More importantly,the strengthening effect is still effective at high temperatures and the compressive strength is 1.28 GPa at 750°C.The simulation results show that this strengthening effect is due to the increased Hirth dislocation at high temperatures.This study expands the applications of TiAl alloys for load-bearing structures and provides a new strategy for improving the strength of intermetallic compounds at both room temperature and high temperatures.

关键词： TiAl alloys Strengthening Gradient grain Additive manufacturing Molecular dynamics

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Deciphering deformation mechanisms of hierarchical dual-phase CrCoNi coatings

引用

Journal of Materials Science & Technology 2020年第4期39卷 7-13页

作者： S.J.Tsianikas y.chen Z.Xie School of Mechanical Engineering The University of AdelaideAdelaideSA5005Australia Centre for Advanced Thin Film Materials and Device Faculty of Materials and EnergySouthwest UniversityChongqing400715China School of Engineering Edith Cowan UniversityWA6027Australia

Hierarchical Cr Co Ni medium entropy alloy(MEA)thin films with a dual-phase face-centred cubic(FCC)and hexagonal closed-packed(HCP)nanostructure were prepared on M2 steel substrates by closed field unbalanced magnetron sputtering.Nanoindentation tests show an ultra-high hardness of 9.5 GPa,attributable to large amounts of innate planar defects(i.e.,growth twins and stacking faults)impeding dislocation motion in the coatings.A deep analysis of undeformed and post-mortem samples reveals grain refinement as the dominant deformation mechanism in FCC dominated regions,while phase transformation and shear banding played major roles in regions occupied by HCP phase.The grain refinement was facilitated by twin/matrix lamellae,with dislocations piling up and arranging into interconnecting grain boundaries.The shear banding was accelerated by innate planar defects in the HCP phase due to a lack of slip systems.Of particular interest is the observation of HCP→FCC phase transformation,which was catalysed by deformation-induced grain reorientation with innate stacking faults acting as embryos to grow the FCC phase.The results of this work suggest that multiple deformation pathways could be activated in Cr Co Ni coatings with assistance of growth defects,thereby imparting these technically important coatings appreciable ductility.

关键词： Medium entropy alloys Sputter deposition Grain refinement Shear banding Phase transformation

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

注意力缺陷/多动障碍儿童的类淋巴功能评估

引用

国际医学放射学杂志 2024年第3期 372-372页

作者： y.chen M.Wang S.Su y.Dai M.Zou L.Lin 孔令红

摘要目的神经发育疾病中是否存在免疫系统的改变仍不清楚。研究旨在通过定量测量血管周围淋巴间隙（VRS）体积并进行沿血管周围间隙扩散张量成像分析（DTI-

关键词：

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Multi-population particle swarm optimization algorithm for automatic design of steel frames

引用

Frontiers of Structural and Civil Engineering 2024年第1期18卷 89-103页

作者： Wenchen SHAN Jiepeng LIU yao DING y.Frank chen Junwen ZHOU Institute of Smart City and Intelligent Transportation Southwest Jiaotong UniversityChengdu 610000China School of Civil Engineering Chongqing UniversityChongqing 400045China Department of Civil Engineering the Pennsylvania State UniversityMiddletownPA 17057USA

Steel structures are widely used;however,their traditional design method is a trial-and-error procedure which is neither efficient nor cost effective.Therefore,a multi-population particle swarm optimization(MPPSO)algorithm is developed to optimize the weight of steel frames according to standard design codes.Modifications are made to improve the algorithm performances including the constraint-based strategy,piecewise mean learning strategy and multi-population cooperative strategy.The proposed method is tested against the representative frame taken from American standards and against other steel frames matching Chinese design codes.The related parameter influences on optimization results are discussed.For the representative frame,MPPSO can achieve greater efficiency through reduction of the number of analyses by more than 65% and can obtain frame with the weight for at least 2.4%lighter.A similar trend can also be observed in cases subjected to Chinese design codes.In addition,a migration interval of 1 and the number of populations as 5 are recommended to obtain better MPPSO results.The purpose of the study is to propose a method with high efficiency and robustness that is not confined to structural scales and design codes.It aims to provide a reference for automatic structural optimization design problems even with dimensional complexity.The proposed method can be easily generalized to the optimization problem of other structural systems.

关键词： steel frame multi-population particle swarm optimization automatic structural optimization design

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

动态增强MRI在预测直肠癌病人严重急性放射性直肠损伤中的作用

引用

国际医学放射学杂志 2024年第3期 373-373页

作者： y.chen L.Ding Z.W.Zhang X.H.Wu y.T.Que y.R.Ma 余翔玲

摘要目的探讨动态增强MRI(DCE-MRI)定量参数在预测直肠癌病人严重急性放射性直肠损伤（RRI）中的潜力。方法回顾性纳入2014年11月—2021年3月期间接受新

关键词：

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：