检索结果-南通市图书馆

Cavity-agnostic acoustofluidic manipulations enabled by guided flexural waves on a membrane acoustic waveguide actuator

引用

Microsystems & Nanoengineering 2024年第2期10卷 153-171页

作者： Philippe Vachon Srinivas Merugu jaibir Sharma Amit Lal Eldwin j.Ng yul Koh joshua E.-y.lee Chengkuo lee Department of Electrical and Computer Engineering National University of SingaporeSingaporeSingapore Institute of Microelectronics Agency for ScienceTechnology and Research(A*STAR)SingaporeSingapore SonicMEMS Laboratory School of Electrical and Computer EngineeringCornell UniversityIthacaNYUSA School of Electrical and Data Engineering University of Technology SydneyUltimoNSWAustralia

This article presents an in-depth exploration of the acoustofluidic capabilities of guided flexural waves(GFWs)generated by a membrane acoustic waveguide actuator(MAWA).By harnessing the potential of GFWs,cavity-agnostic advanced particle manipulation functions are achieved,unlocking new avenues for microfluidic systems and lab-on-a-chip *** localized acoustofluidic effects of GFWs arising from the evanescent nature of the acoustic fields they induce inside a liquid medium are numerically investigated to highlight their unique and promising *** traditional acoustofluidic technologies,the GFWs propagating on the MAWA’s membrane waveguide allow for cavity-agnostic particle manipulation,irrespective of the resonant properties of the fluidic ***,the acoustofluidic functions enabled by the device depend on the flexural mode populating the active region of the membrane *** demonstrations using two types of particles include in-sessile-droplet particle transport,mixing,and spatial separation based on particle diameter,along with streaming-induced counter-flow virtual channel generation in microfluidic PDMS *** experiments emphasize the versatility and potential applications of the MAWA as a microfluidic platform targeted at lab-on-a-chip development and showcase the MAWA’s compatibility with existing microfluidic systems.

关键词： waveguide fluid cavity

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Generalized polynomial chaos expansion by reanalysis using static condensation based on substructuring

引用

Applied Mathematics and Mechanics(English Edition) 2024年第5期45卷 819-836页

作者： D.lee S.CHANG j.lee Department of Automotive Engineering Hanyang UniversitySeoul 04763Republic of Korea School of Mechanical Engineering Chungnam National UniversityDaejeon 34134Republic of Korea Department of Mechanical Robotics and Energy EngineeringDongguk UniversitySeoul 04620Republic of Korea

This paper presents a new computational method for forward uncertainty quantification(UQ)analyses on large-scale structural systems in the presence of arbitrary and dependent random *** method consists of a generalized polynomial chaos expansion(GPCE)for statistical moment and reliability analyses associated with the stochastic output and a static reanalysis method to generate the input-output data *** the reanalysis,we employ substructuring for a structure to isolate its local regions that vary due to random *** allows for avoiding repeated computations of invariant substructures while generating the input-output data *** substructuring with static condensation further improves the computational efficiency of the reanalysis without losing ***,the GPCE with the static reanalysis method can achieve significant computational saving,thus mitigating the curse of dimensionality to some degree for UQ under high-dimensional *** numerical results obtained from a simple structure indicate that the proposed method for UQ produces accurate solutions more efficiently than the GPCE using full finite element analyses(FEAs).We also demonstrate the efficiency and scalability of the proposed method by executing UQ for a large-scale wing-box structure under ten-dimensional(all-dependent)random inputs.

关键词： forward uncertainty quantification(UQ) generalized polynomial chaos expansion(GPCE) static reanalysis method static condensation substructuring

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Construction of 2D/2D Ti_(3)C_(2)T_(x)MXene/CdS heterojunction with photothermal effect for efficient photocatalytic hydrogen production

引用

journal of Materials Science & Technology 2024年第4期171卷 1-9页

作者： T.y.Huang Z.yang S.y.yang Z.H.Dai y.j.Liu j.H.Liao G.y.Zhong Z.j.Xie y.P.Fang S.S.Zhang Key Laboratory for Biobased Materials and Energy of Ministry of Education Guangdong Laboratory for Lingnan Modern AgricultureCollege of Materials and EnergySouth China Agricultural UniversityGuangzhou 510643China School of Physics and Optoelectronics South China University of TechnologyGuangzhou 510640China School of Chemical Engineering and Energy Technology Guangdong Provincial Key Laboratory of Distributed Energy SystemsDongguan University of TechnologyDongguan 523808China

The insensitivity of semiconductors to visible and infrared light is a key constraint on the utilization of light energy in photocatalytic *** photocatalysts with full-spectrum absorption through surface engineering is an effective approach to fully harnessing light energy in semiconductor ***,a novel stable Ti_(3)C_(2)T_(x)MXene/CdS heterojunction catalyst is obtained by in-situ epitaxial growth of two-dimensional(2D)CdS nanosheets on 2D MXene interface via a solvothermal *** exceptional light absorption properties of MXene confer outstanding full-spectrum driven photocat-alytic hydrogen evolution capability upon the heterogeneous *** unique 2D/2D structure effectively mitigated the recombination of photogenerated carriers,enhancing the photocatalytic performance of the ***,the composite catalyst exhibits a significantly higher surface temperature of 80.4℃under visible light irradiation at an intensity of 0.1 W/cm^(2),which is 1.84 times higher than that of *** irradiation of visible and near infrared light,the composite catalyst with photothermal ef-fect demonstrates a remarkable hydrogen evolution rate of 65.4 mmol g^(-1)h^(-1),which is 7.2 times higher than that of CdS *** study introduces a novel approach for constructing full-spectrum absorption catalysts and expands the application of the photothermal effect in photocatalytic hydrogen evolution research.

关键词： Two-dimensional structure Heterostructure Photothermal effect Photocatalyst Hydrogen evolution

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Mathematical modeling and simulations of stress mitigation by coating polycrystalline particles in lithium-ion batteries

引用

Applied Mathematics and Mechanics(English Edition) 2024年第6期45卷 947-962页

作者： N.IQBAL j.CHOI S.F.SHAH C.lee S.lee Department of Mechanical Roboticsand Energy EngineeringDongguk University-SeoulSeoul 04620Republic of Korea

A chemo-mechanical model is developed to investigate the effects on the stress development of the coating of polycrystalline Ni-rich LiNixMnyCo_(z)O_(2)(x≥0.8)(NMC)particles with poly(3,4-ethylenedioxythiophene)(PEDOT).The simulation results show that the coating of primary NMC particles significantly reduces the stress generation by efficiently accommodating the volume change associated with the lithium diffusion,and the coating layer plays roles both as a cushion against the volume change and a channel for the lithium transport,promoting the lithium distribution across the secondary particles more ***,the lower stiffness,higher ionic conductivity,and larger thickness of the coating layer improve the stress *** paper provides a mathematical framework for calculating the chemo-mechanical responses of anisotropic electrode materials and fundamental insights into how the coating of NMC active particles mitigates stress levels.

关键词： lithium-ion battery(LIB) polycrystalline particle coating finite element simulation Ni-rich LiNixMnyCo_(z)O_(2)(x>0.8)(NMC)

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Supposition of graphene stacks to estimate the contact resistance and conductivity of nanocomposites

引用

Applied Mathematics and Mechanics(English Edition) 2024年第4期45卷 663-676页

作者： y.ZARE M.T.MUNIR G.j.WENG K.y.RHEE Biomaterials and Tissue Engineering Research Group Department of Interdisciplinary TechnologiesBreast Cancer Research CenterMotamed Cancer InstituteTehran ***Iran College of Engineering and Technology American University of the Middle EastEgaila 54200Kuwait Department of Mechanical and Aerospace Engineering Rutgers UniversityNew BrunswickNJ 08903U.S.A. Department of Mechanical Engineering(BK21 Four) College of EngineeringKyung Hee UniversityYongin 446701Republic of Korea

In this study,the effects of stacked nanosheets and the surrounding interphase zone on the resistance of the contact region between nanosheets and the tunneling conductivity of samples are evaluated with developed equations superior to those previously *** contact resistance and nanocomposite conductivity are modeled by several influencing factors,including stack properties,interphase depth,tunneling size,and contact *** developed model's accuracy is verified through numerous experimental *** further validate the models and establish correlations between parameters,the effects of all the variables on contact resistance and nanocomposite conductivity are ***,the contact resistance is primarily dependent on the polymer tunnel resistivity,contact area,and tunneling *** dimensions of the graphene nanosheets significantly influence the conductivity,which ranges from 0 S/m to90 S/*** increased number of nanosheets in stacks and a larger gap between them enhance the nanocomposite's ***,the thicker interphase and smaller tunneling size can lead to higher sample conductivity due to their optimistic effects on the percolation threshold and network efficacy.

关键词： graphene polymer composite stacked nanosheet tunneling conductivity contact resistance interphase

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Thermo-kinetic characteristics on stabilizing hetero-phase interface of metal matrix composites by crystal plasticity finite element method

引用

journal of Materials Science & Technology 2024年第2期169卷 53-67页

作者： y.B.Zhang S.j.Song F.Liu State Key Laboratory of Solidification Processing Northwestern Polytechnical UniversityXi’an 710072China Analytical&Testing Center Northwestern Polytechnical UniversityXi’an 710072China

Using dislocation-based constitutive modeling in three-dimension crystal plasticity finite element(3D CPFE)simulations,co-deformation and instability of hetero-phase interface in different material systems were herein studied for polycrystalline metal matrix composites(MMCs).Local stress and strain fields in two types of 3layer MMCs such as fcc/fcc Cu-Ag and fcc/bcc Cu-Nb have been predicted under simple compressive ***,more severe strain-induced interface instability can be observed in the fcc/bcc systems than in the fcc/fcc systems upon refining to metallic nanolayered composites(MNCs).By detailed analysis of stress and strain localization,it has been demonstrated that the interface instability is always accompanied by high-stress concentration,i.e.,thermodynamic characteristics,or high strain prevention i.e.,kinetic characteristics,at the hetero-phase *** then follows that the thermodynamic driving forceG and the kinetic energy barrier Q during dislocation and shear banding can be adopted to classify the deformation modes,following the so-called thermo-kinetic *** by inserting a high density of high-energy interfaces into the Cu-Nb composites,such thermo-kinetic integration at the hetero-phase interface allows a successful establishment of MMCs with the high△G-high Q deformation mode,which ensures high hardening and uniform strain distri-bution,thus efficiently suppressing the shear band,stabilizing the hetero-phase interface,and obtaining an exceptional combination in strength and *** hetero-phase interface chosen by a couple of thermodynamics and kinetics can be defined as breaking the thermo-kinetic correlation and has been proposed for artificially designing MNCs.

关键词： Thermodynamics and kinetics Physics-based constitutive modeling Hetero-phase interface Crystal plasticity finite element

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Mathematical beauty and Palladian architecture:Measuring and comparing visual complexity and diversity

引用

Frontiers of Architectural Research 2024年第4期13卷 729-740页

作者： ju Hyun lee Michael j.Ostwald School of Built Environment Faculty of ArtsDesign&ArchitectureThe University of New South WalesSydneyNSW 2052Australia

Palladio’s design principles,including proportion and harmony,have often been associated with mathematical definitions of ***,the geometric and semantic properties of his fac¸ades have rarely been analysed in a holistic *** is little evidence of how mathematical beauty may be embodied in his *** research investigates complexity(fractal dimension or D)and diversity(perplexity or PP)as aesthetic indices,aiming to capture distinct characteristics of Palladian *** D and PP values of 22 Palladian villa fac¸ades are measured and analysed,before being compared with those of three Renaissance facades by Sebastiano *** combination of D and PP captures the geometric and semantic aesthetic qualities of architectural ***,the developed scatter plot of D and PP results supports the identification of four distinct aesthetic types of Palladian fac¸ade *** novel combination of D and PP measures contributes to a better understanding of one definition of the mathematical beauty of architecture,wherein“the whole is other than the sum of the parts”in compositional terms(a famous Gestalt principle).Specifically,this research provides new mathematical insights into the visual character of Palladian architecture and compares two important measures thereof.

关键词： Palladian architecture Complexity Diversity Mathematical beauty Perplexity Fac¸ade design

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Superplasticity of fine-grained Mg-10Li alloy prepared by severe plastic deformation and understanding its deformation mechanisms

引用

journal of Magnesium and Alloys 2024年第1期12卷 316-331页

作者： H.T.jeong S.W.lee W.j.Kim Department of Materials Science and Engineering Hongik UniversityMapo-guSangsu-dong 72-1Seoul 121-791Republic of Korea

The superplastic behavior and associated deformation mechanisms of a fine-grained Mg-10.1 Li-0.8Al-0.6Zn alloy(LAZ1011)with a grain size of 3.2μm,primarily composed of the BCCβphase and a small amount of the HCPαphase,were examined in a temperature range of 473 K to 623 *** microstructural refinement of this alloy was achieved by employing high-ratio differential speed *** best superplasticity was achieved at 523 K and at strain rates of 10^(-4)-5×10^(-4)s^(-1),where tensile elongations of 550±600%were *** the heating and holding stage of the tensile samples prior to tensile loading,a significant increase in grain size was observed at temperatures above 573 ***,it was important to consider this effect when analyzing and understanding the superplastic deformation behavior and *** the investigated strain rate range,the superplastic flow at low strain rates was governed by lattice diffusion-controlled grain boundary sliding,while at high strain rates,lattice diffusion-controlled dislocation climb creep was the rate-controlling deformation *** was concluded that solute drag creep is unlikely to *** the late stages of deformation at 523 K,it was observed that grain boundary sliding led to the agglomeration of theαphase,resulting in significant strain *** mechanism maps were constructed forβ-Mg-Li alloys in the form of 2D and 3D formats as a function of strain rate,stress,temperature,and grain size,using the constitutive equations for various deformation mechanisms derived based on the data of the current tests.

关键词： Magnesium-lithium alloy Superplasticity Severe plastic deformation Grain size Grain growth

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Optimization of chemistry and process parameters for control of intermetallic formation in Mg sludges

引用

journal of Magnesium and Alloys 2024年第4期12卷 1431-1448页

作者： y.Fu G.G.Wang A.Hu y.Li K.B.Thacker j.P.Weiler H.Hu Department of Mechanical Automotive and Materials EngineeringUniversity of Windsor401 Sunset AveWindsorOntario N9B 3P4Canada Global Technology Centre Meridian Lightweight Technologies25 MacNab AveStrathroyOntario N7G 4H6Canada

Intermetallic formation in sludge during magnesium(Mg)melting,holding and high pressure die casting practices is a very important ***,very often it is overlooked by academia,original equipment manufacturers(OEM),metal ingot producers and even die *** aim of this study was to minimize the intermetallic formation in Mg sludge via the optimization of the chemistry and process *** Al8Mn5 intermetallic particles were identified by the microstructure analysis based on the Al and Mn *** design of experiment(DOE)technique,Taguchi method,was employed to minimize the intermetallic formation in the sludge of Mg alloys with various chemical compositions of Al,Mn,Fe,and different process parameters,holding temperature and holding *** sludge yield(Sy)and intermetallic size(IS)was selected as two *** optimum combination of the levels in terms of minimizing the intermetallic formation were 9 wt.%Al,0.15 wt.%Mn,0.001 wt.%(10 ppm)Fe,690℃ for the holding temperature and holding at 30 mins for the holding time,*** best combination for smallest intermetallic size were 9 wt.%Al,0.15 wt.%Mn,0.001 wt.%(10 ppm)Fe,630℃ for the holding temperature and holding at 60 mins for the holding time,*** groups of sludge factors,Chemical Sludge(CSF),Physical Sludge(PSF)and Comprehensive Sludge Factors(and CPSF)were established for prediction of sludge yields and intermetallic sizes in Al-containing Mg *** CPSF with five independent variables including both chemical elements and process parameters gave high accuracy in prediction,as the prediction of the PSF with only the two processing parameters of the melt holding temperature and time showed a relatively large deviation from the experimental *** Chemical Sludge Factor was primarily designed for small ingot producers and die casters with a limited melting and holding capacity,of which process parameters could be fixed *** Physical Sludge Factor could be used f

关键词： Magnesium sludge Al-Mn intermetallic Optimization Taguchi method Sludge factor Chemical composition Process parameter

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Effect of Al_(2)O_(3)on the Mechanical Properties of(B_(4)C+Al_(2)O_(3))/Al Neutron Absorbing Materials

引用

Acta Metallurgica Sinica(English Letters) 2024年第8期37卷 1411-1420页

作者： j.X.Cai B.M.Shi N.Li y.Liu Z.G.Zhang y.N.Zan Q.Z.Wang B.L.Xiao Z.y.Ma Shi‑Changxu Innovation Center for Advanced Materials Institute of Metal ResearchChinese Academy of SciencesShenyang 110016China Key Laboratory of Nuclear Materials and Safety Assessment Institute of Metal ResearchChinese Academy of SciencesShenyang 110016China Nuclear Equipment Division Beijing Institute of Nuclear EngineeringChina Nuclear Power Engineering Co.Ltd.Beijing 100840China Department of Materials Science School of Mechanical EngineeringShenyang UniversityShenyang 110044China

B_(4)C/Al composites are widely utilized as neutron absorbing materials for the storage and transportation of spent nuclear *** order to improve the high-temperature mechanical properties of B_(4)C/Al composites,in-situ nano-Al_(2)O_(3)was introduced utilizing oxide on Al powder *** this study,the Al_(2)O_(3)content was adjusted by utilizing spheroid Al powder with varying diameters,thereby investigating the impact of Al_(2)O_(3)content on the tensile properties of(B_(4)C+Al_(2)O_(3))/Al *** was found that the pinning effect of Al_(2)O_(3)on the grain boundaries could hinder the recovery of dislocations and lead to dislocation accumulation at high *** the result,with the increase in Al_(2)O_(3)content and the decrease in grain size,the high-temperature strength of the composites increased *** finest Al powder used in this investigation had a diameter of 1.4μm,whereas the resultant composite exhibited a maximum strength of 251 MPa at room temperature and 133 MPa at 350℃,surpassing that of traditional B_(4)C/Al composites.

关键词： Al matrix composites Neutron absorbing materials (B_(4)C+Al_(2)O_(3))/Al composites High-temperature strength

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：