检索结果-南通市图书馆

Journal of magnesium and Alloys 2024年第5期12卷 1841-1853页

作者： M.Lv h.L.Ge Q.Q.Jin X.h.Shao y.T.Zhou B.Zhang X.L.ma Shenyang National Laboratory for materials Science Institute of Metal ResearchChinese Academy of Sciences72 Wenhua RoadShenyang 110016China School of materials Science and Engineering University of Science and Technology of ChinaShenyang 110016China materials Science and Engineering Research Center Guangxi University of Science and TechnologyLiuzhou 545006China

In-situ electron irradiation and aging are applied to introduce high-density precipitates in an Mg-10Gd-3y-1Zn-0.5Zr(GWZ1031K,wt.%)alloy to improve the *** results show that the hardness of the Mg alloy after irradiation for 10 h and aging for 9 h at 250℃ is 1.64 GPa,which is approximately 64% higher than that of the samples before being *** is mainly attributed to γ'precipitates on the basal plane after irradiation and the high-density nanoscale β'precipitates on the prismatic plane after aging,which should be closely related to the irradiation-induced homogenous *** latter plays a key role in precipitation *** result paves a way to improve the mechanical properties of metallic materials by tailoring the precipitation through irradiation and aging.

关键词： Mg alloy Electron beam irradiation hardening Precipitates In-situ TEM

An improved pulse coupled neural networks model for semantic IoT

在线全文

学校读者我要写书评

暂无评论

Digital Communications and Networks 2024年第3期10卷 557-567页

作者： Rong ma Zhen Zhang yide ma Xiping hu Edith C.h.Ngai Victor C.M.Leung School of Information Science and Engineering Lanzhou UniversityLanzhou 730000China School of Medical Technology Beijing Institute of TechnologyBeijing100081China Department of Electrical and Electronic Engineer The University of Hong KongHong Kong 999077China College of Computer Science and Software Engineering Shenzhen UniversityShenzhen 518060China Department of Electrical and Computer Engineering the University of British ColumbiaVancouverBC V6T 1Z4Canada

In recent years,the Internet of Things(IoT)has gradually developed applications such as collecting sensory data and building intelligent services,which has led to an explosion in mobile data ***,with the rapid development of artificial intelligence,semantic communication has attracted great attention as a new communication ***,for IoT devices,however,processing image information efficiently in real time is an essential task for the rapid transmission of semantic *** the increase of model parameters in deep learning methods,the model inference time in sensor devices continues to *** contrast,the Pulse Coupled Neural Network(PCNN)has fewer parameters,making it more suitable for processing real-time scene tasks such as image segmentation,which lays the foundation for real-time,effective,and accurate image ***,the parameters of PCNN are determined by trial and error,which limits its *** overcome this limitation,an Improved Pulse Coupled Neural Networks(IPCNN)model is proposed in this *** IPCNN constructs the connection between the static properties of the input image and the dynamic properties of the neurons,and all its parameters are set adaptively,which avoids the inconvenience of manual setting in traditional methods and improves the adaptability of parameters to different types of *** segmentation results demonstrate the validity and efficiency of the proposed self-adaptive parameter setting method of IPCNN on the gray images and natural images from the matlab and Berkeley Segmentation *** IPCNN method achieves a better segmentation result without training,providing a new solution for the real-time transmission of image semantic information.

关键词： Internet of things(IoT) Semantic information Real-time application Improved pulse coupled neural network Image segmentation

Photoluminescence and ratiometric thermo-response of Eu^(2+)and Eu^(3+)in BaAl_(2)B_(2)O_(7):Eu^(2+),Eu^(3+)phosphor materials

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Rare Earths 2024年第7期42卷 1240-1249,I0002页

作者： Ziyao Wang haitao Fu Xiufeng Zhan Bo Tong Guofeng ma h.T.(Bert)hintzen Institute of Innovative Science and Technology Shenyang UniversityShenyang110044China College of Mechanical Engineering Shenyang UniversityShenyang110044China Faculty of Applied Sciences Delft University of Technology2629 JBDelftthe Netherlands

A novel Eu^(2+)-Eu^(3+)co-activated ratiometric thermo-sensitive phosphor was developed and synthesized by solid-state *** valence state of Eu,photoluminescence and thermo-sensitive performance of the phosphor prepared either in ambient air or carbothermally were investigated and *** phosphor shows high sensitivity(Sa=0.0173 K^(-1),S_(r)=0.461%/K)and superior signal discriminability(Δν∼10380 cm^(−1)).The thermo-sensitive performance is subject to the dual effects of different thermo-responses by Eu^(2+)versus Eu^(3+)combined with energy transfer from Eu^(2+)to Eu^(3+),so that the sensitivity of the phosphor in the temperature range presents a non-monotonic *** development of the BaAl_(2)B_(2)O_(7):Eu^(2+),Eu^(3+)phosphor is not only expected to be relevant for application in the field of temperature sensing,but also of reference significance for improving the sensitivity by means of energy transfer between co-activator ions over a wider temperature range of Eu^(2+)-Eu^(3+)co-activated ratiometric thermo-sensitive phosphors.

关键词： Photoluminescence Ratiometric thermo-response Phosphor Eu^(2+)/Eu^(3+) Rare earths

hydration lubrication modulated by water structure at TiO2–aqueous interfaces

在线全文

学校读者我要写书评

暂无评论

Friction 2024年第4期12卷 591-605页

作者： Pingsu ma yuan LIU Ke hAN yu TIAN Liran ma State Key Laboratory of Tribology in Advanced Equipment Department of Mechanical EngineeringTsinghua UniversityBeijing 100084China

The nature of solid-liquid interfaces is of great significance in *** advances have been made in lubrication based on hydration ***,a detailed molecular-level understanding is still ***,we investigated water molecule behaviors at the TiO2-aqueous interfaces by the sum-frequency generation vibrational spectroscopy(SFG-VS)and atomic force microscope(AFM)to elucidate the fundamental role of solid-liquid interfaces in *** contributions of water structures and hydration effects were revealed,where water structures played the dominant role in lubrication for TiO2 surfaces of varying hydrophilicity,while hydration effects dominated with the increasing of ion *** lubrication is observed on the initial TiO2 surfaces with strongly h-bonded water molecules compared to the hydrophilic TiO2 surfaces with more disordered *** stable ordered water arrangement with strong hydrogen bonds and the shear plane occurring between the ordered water layer and subsequent water layer may play a significant role in achieving lower *** adsorbed hydrated molecules with the increasing ionic concentration perturb ordered water but lead to the enhancement of hydration effects,which is the main reason for the improved lubrication for both *** work provides more insights into the detailed molecular-level understanding of the mechanism of hydration lubrication.

关键词： hydration lubrication interfacial water structures hydration effects titanium dioxide(TiO2)

Unconfined compressive strength and failure behaviour of completely weathered granite from a fault zone

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Mountain Science 2024年第6期21卷 2140-2158页

作者： DU Shaohua ma Jinyin ma Liyao ZhAO yaqian School of Civil Engineering and Architecture Henan University of Science and TechnologyLuoyang 471023China School of Resources and Safety Engineering Central South UniversityChangsha 410083China China Railway 18th Bureau Group Co. LtdTianjin 300222 China China General Nuclear Power Corporation Shenzhen 518031China

Understanding the strength characteristics and deformation behaviour of the tunnel surrounding rock in a fault zone is significant for tunnel stability *** this study,a series of unconfined compression tests were conducted to investigate the mechanical characteristics and failure behaviour of completely weathered granite(CWG)from a fault zone,considering with height-diameter(h/d)ratio,dry densities(ρd)and moisture contents(ω).Based on the experimental results,a regression mathematical model of unconfined compressive strength(UCS)for CWG was developed using the Multiple Nonlinear Regression method(MNLR).The research results indicated that the UCS of the specimen with a h/d ratio of 0.6 decreased with the increase ofω.When the h/d ratio increased to 1.0,the UCS increasedωwith up to 10.5%and then ***ρd is conducive to the improvement of the UCS at anyω.The deformation and rupture process as well as final failure modes of the specimen are controlled by h/d ratio,ρd andω,and the h/d ratio is the dominant factor affecting the final failure mode,followed byωandρ*** specimens with different h/d ratio exhibited completely different fracture mode,i.e.,typical splitting failure(h/d=0.6)and shear failure(h/d=1.0).By comparing the experimental results,this regression model for predicting UCS is accurate and reliable,and the h/d ratio is the dominant factor affecting the UCS of CWG,followed byρd and thenω.These findings provide important references for maintenance of the tunnel crossing other fault fractured zones,especially at low confining pressure or unconfined condition.

关键词： Fault fracture zone Completely weathered granite(CWG) Unconfined compression strength(UCS) Multiple nonlinear regression model

Effect of heat treatment on the microstructure,mechanical properties and fracture behaviors of ultra-high-strength SiC/Al-Zn-Mg-Cu composites

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and materials 2024年第10期31卷 2233-2243页

作者： Guonan ma Shize Zhu Dong Wang Peng Xue BolüXiao Zongyi ma Shi-changxu Innovation Center for Advanced materials Institute of Metal ResearchChinese Academy of SciencesShenyang 110016China Centre of Excellence for Advanced materials Dongguan 523808China

A high-zinc composite,12vol%SiC/Al-13.3 Zn-3.27 Mg-1.07Cu(wt%),with an ultra-high-strength of 781 MPa was success-fully fabricated through a powder metallurgy method,followed by an extrusion *** effects of solid-solution and aging heat treat-ments on the microstructure and mechanical properties of the composite were extensively *** with a single-stage sol-id-solution treatment,a two-stage solid-solution treatment(470℃/1 h+480℃/1 h)exhibited a more effective solid-solution strengthen-ing owing to the higher degree of solid-solution and a more uniform *** to the aging hardness curves of the com-posite,the optimized aging parameter(100℃/22 h)was *** the aging temperature and time resulted in finer and more uniform nanoscale precipitates but only yielded a marginal increase in tensile *** fractography analysis revealed that intergranu-lar cracking and interface debonding were the main fracture mechanisms in the ultra-high-strength SiC/Al-Zn-Mg-Cu *** regions,such as the SiC/Al interface containing numerous compounds and the precipitate-free zones at the high-angle grain boundaries,were identified as significant factors limiting the strength enhancement of the *** compounds,including MgO,MgZn2,and Cu5Zn8,reduced the interfacial bonding strength,leading to interfacial debonding.

关键词： metal matrix composites heat treatment interfacial reaction mechanical properties fracture mechanism

Effects of gravel on the water absorption characteristics and hydraulic parameters of stony soil

在线全文

学校读者我要写书评

暂无评论

Journal of Arid Land 2024年第7期16卷 895-909页

作者： ma yan WANG youqi ma Chengfeng yUAN Cheng BAI yiru Breeding Base for State Key Laboratory of Land Degradation and Ecological Restoration in Northwest China Ningxia UniversityYinchuan 750021China School of Geography and Planning Ningxia UniversityYinchuan 750021China School of Ecology and Environment Ningxia UniversityYinchuan 750021China

The eastern foothills of the helan Mountains in China are a typical mountainous region of soil and gravel,where gravel could affect the water movement process in the *** study focused on the effects of different gravel contents on the water absorption characteristics and hydraulic parameters of stony *** stony soil samples were collected from the eastern foothills of the helan Mountains in April 2023 and used as the experimental materials to conduct a one-dimensional horizontal soil column absorption *** experimental groups with gravel contents of 0%,10%,20%,30%,40%,and 50%were established to determine the saturated hydraulic conductivity(K_(s)),saturated water content(θ_(s)),initial water content(θ_(i)),and retention water content(θ_(r)),and explore the changes in the wetting front depth and cumulative absorption volume during the absorption *** Philip model was used to fit the soil absorption process and determine the soil water absorption *** the length of the characteristic wetting front depth,shape coefficient,empirical parameter,inverse intake suction and soil water suction were derived from the van Genuchten ***,the hydraulic parameters mentioned above were used to fit the soil water characteristic curves,unsaturated hydraulic conductivity(K_(θ))and specific water capacity(C(h)).The results showed that the wetting front depth and cumulative absorption volume of each treatment gradually decreased with increasing gravel *** with control check treatment with gravel content of 0%,soil water absorption rates in the treatments with gravel contents of 10%,20%,30%,40%,and 50%decreased by 11.47%,17.97%,25.24%,29.83%,and 42.45%,*** the gravel content increased,inverse intake suction gradually increased,and shape coefficient,K_(s),θ_(s),andθ_(r)gradually *** the same soil water content,soil water suction and K_(θ)gradually decreased with increasing gravel *** the same soil water s

关键词： stony soil gravel content water absorption characteristics hydraulic parameters one-dimensional horizontal soil column absorption experiment van Genuchten model eastern foothills of helan Mountains

Effect of Cryogenic Treatment on Microstructure and Tribological Property Evolution of Electron Beam Melted Ti6Al4V

在线全文

学校读者我要写书评

暂无评论

Journal of Wuhan University of Technology(materials Science) 2024年第4期39卷 1010-1017页

作者：黄西娜 ma Xiaowen XU Tianyi School of Mechanical and Electrical Engineering China University of Mining and Technology-BeijingBeijing 100083China School of Engineering and Technology China University of GeosciencesBeijing 100083China

Cryogenic treatment was used to improve the tribological properties of Ti6Al4V artificial hip joint *** treatment at-196℃with different holding time were carried out on Ti6Al4V specimens fabricated using electron beam melting(EBM),and their microstructure and tribological properties evolution were systematically analyzed by scanning electron microscopy(SEM),vickers hardness,and wear *** experimental results show that the as-fabricated specimen consists of lamellarαphase andβcolumnar ***,the thickness of lamellarαphase decreased after cryogenic *** addition,it can be found that the fineαphase was precipitated and dispersed between the lamellarαphase with the holding time *** hardness shows a trend of first increasing and then *** wear rate of the specimen cryogenic treated for 24 h is the minimum and the average friction coefficient is 0.50,which is reduced by 14.61%compared with the *** wear mechanism of the as-fabricated specimen is severe exfoliation,adhesive,abrasive,and slight fatigue ***,the specimen cryogenic treated for 24 h shows slight adhesive and abrasive *** can be concluded that it is feasibility of utilizing cryogenic treatment to reduce the wear of EBMed Ti6Al4V.

关键词： electron beam melting(EBM) cryogenic treatment microstructure vickers hardness tribological property

Access to high-Molecular-Weight Polyethylenes through high Temperature Ethylene Polymerization Catalysed by Ethylene-Bridged ansa-(3-R-Cyclopentadienyl)(Fluorenyl) Zirconocene Complexes

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Polymer Science 2024年第1期42卷 42-51,I0007页

作者： Bo Li haiyan ma Jiling huang Shanghai Key Laboratory of Functional materials Chemistry and Laboratory of Organometallic Chemistry School of Chemistry and Molecular EngineeringEast China University of Science and TechnologyShanghai 200237China

A series of C1-symmetric ethylene-bridged ansa-(3-R-cyclopentadienyl)(fluorenyl) metallocene complexes(Zr: 1-5;hf: 6) have been synthesized, characterized and investigated as catalyst precursors for the high temperature ethylene polymerization. Using methylaluminoxane(maO) as the cocatalyst, zirconium complexes 1-5 bearing a bulky substituent on the 3-position of the cyclopendienyl ring showed high catalytic activities up to 1.48×10^(7) g PE·mol_(Zr)^(-1)·h^(-1) toward the polymerization of ethylene and afforded polyethylenes with high molecular weights(1.49×10^(5)-6.31×10^(5) g/mol), meanwhile exhibting great thermal stability at high temperatures up to 120 ℃ together with a long catalytic life time up to 2 h. By adopting low Al/Zr ratios, such as 125, polyethylenes with ultra high molecular weights up to 2.86×106 g/mol were obtained. It is worthy of noting that zirconium complexes 1-4 bearing a substituent with an aryl pendant showed temperature-dependent activities, which increased rapidly with the increase of polymerization temperature, thus weak interaction of the pendent aryl group with the cationic active center is proposed to account for the very low activities displayed at low temperatures. In contrast to zirconocene complexes 1-5, hafnocene complex 6 only displayed very low catalytic activities toward the polymerization of ethylene and afforded polyethylenes with molecular weights ten times smaller than those obtained by zirconocene complexes 1-5. Zirconocene complexes 1-5 were also able to catalyse the polymerization of propylene at high temperatures, but only afforded waxes with low molecular weights.

关键词： ansa-Metallocene Ethylene Propylene Polymerization high temperature