检索结果-南通市图书馆

Hard yet tough and self-lubricating(CuNiTiNbCr)C_(x) high-entropy nanocomposite films:Effects of carbon content on structure and properties

引用

Journal of Materials Science & Technology 2024年第6期173卷 20-30页

作者： y.T.Li x.M.Chen x.K.Zeng M.Liu x.Jiang y.x.Leng Key Laboratory of Advanced Technologies of Materials Ministry of EducationSchool of Materials Science and EngineeringSouthwest Jiaotong UniversityChengdu 610031China Key Laboratory of Noise and Vibration Research Institute of AcousticsChinese Academy of SciencesBeijing 100190China State Key Laboratory of Acoustics Institute of AcousticsChinese Academy of SciencesBeijing 100190China School of Mechanical and Electrical Engineering Mianyang Teachers’CollegeMianyang 621000China

The single-phase high-entropy alloy film is difficult to meet severe friction conditions due to its low hardness and high friction ***-composite structure film is composed of at least two separated phases,showing the properties of strength and toughness integration and excellent wear *** design of nanocomposite structures can effectively improve the mechanical properties and tribological properties of high-entropy alloy *** this study,the(CuNiTiNbCr)C_(x) nanocomposite high-entropy films(HEFs)integrated with high hardness,high toughness,and self-lubrication were synthesized by the double-target co-sputtering *** effect of carbon content on microstructure,mechanical properties,and tribological properties of(CuNiTiNbCr)C_(x) films was *** the increase of carbon content in the HEFs,the carbon atoms preferentially react with Ti,Nb,and Cr to form a(TiNbCr)C ceramic-reinforced phase,and then the excess carbon atoms precipitate in the form of amorphous carbon(a-C)lubricating phase in the *** structure of the HEFs changes from an amorphous structure to a nanocomposite structure of amorphous(amorphous CuNiTiNbCr phase+a-C phase)/nanocrystalline(TiN-bCr)C *** the carbon content is about 21.2 at.%,the carbide phase in the film reaches saturation and the hardness and modulus of the films are highest,which are 18 GPa and 228 GPa,*** HEFs with a carbon content of 44.0 at.%show the best toughness and tribological properties with a friction coefficient of 0.16 and a wear rate of 2.4×10^(-6) mm^(3)/(N m),which is mainly attributed to the excellent resistance to fatigue crack growth and the interfacial lubricating layer formed in the friction *** nanocomposite(CuNiTiNbCr)C_(x) HEFs show very promising application prospect in the field of friction protection.

关键词： High-entropy films Nanocomposite Double-target co-sputtering Strengthening-toughening Tribological properties

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Distinct Electrical and Mechanical Responses of a Cu-10Fe Composite Prepared by Hot-Pressed Sintering and Post Treatment

引用

Acta Metallurgica Sinica(English Letters) 2024年第2期37卷 255-265页

作者： x.y.yue S.y.Peng x.Zhang C.N.He y.Z.Tian Key Laboratory for Anisotropy and Texture of Materials(Ministry of Education) School of Materials Science and EngineeringNortheastern UniversityShenyang110819China School of Materials Science and Engineering and Tianjin Key Laboratory of Composite and Functional Materials Tianjin UniversityTianjin300350China Research Centre for Metallic Wires Northeastern UniversityShenyang110819China

A Cu-10wt%Fe composite was prepared through hot-pressed sintering,and the material was subsequently solution *** hot-pressed sintered and solution treated materials were rolled and *** precipitation behavior and performance changes were systematically studied by using scanning electron microscopy and transmission electron *** contrast to the hot-pressed sintered specimen,the solution treatment significantly affects the thermal stability and properties of the Cu-10wt%Fe *** Cu-10wt%Fe composite was prepared after solid solution,cold rolling and aging at 773 K for 1 h,and it obtained excellent tensile strength of 494 MPa,uniform elongation of 16.3%,electrical conductivity of 51.1%IACS and softening temperature of 838 *** for the distinct difference in thermal stability and properties between hot-pressed sintered and solution treated specimens were *** findings provide a theoretical basis for designing high-performance Cu-based in-situ composites by post treatment.

关键词： Cu-Fe composite Hot-pressed sintering Thermal stability Strength Electrical conductivity

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Reactive destabilization and bidirectional catalyzation for reversible hydrogen storage of LiBH_(4) by novel waxberry-like nano-additive assembled from ultrafine Fe_(3)O_(4) particles

引用

Journal of Materials Science & Technology 2024年第6期173卷 63-71页

作者： S.Wang M.H.Wu y.y.Zhu Z.L.Li y.x.yang y.Z.Li H.F.Liu M.x.Gao Department of Material Science Shenzhen MSU-BIT UniversityShenzhen 518172China State Key Laboratory of Silicon and Advanced Semiconductor Materials&School of Materials Science and Engineering Zhejiang UniversityHangzhou 310027China Institute of Resources Utilization and Rare Earth Development State Key Laboratory of Rare Metals Separation and Comprehensive UtilizationGuangdong Provincial Key Laboratory of Rare Earth Development and ApplicationGuangdong Academy of SciencesGuangzhou 510650China Institute of Science and Technology for New Energy Xi’an Technological UniversityXi’an 710021China National Supercomputing Center in Shenzhen Shenzhen 518055China

LiBH_(4) containing 18.5 wt.%H_(2) is an attractive high-capacity hydrogen storage material,however,it suffers from high operation temperature and poor ***,a novel and low-cost bifunctional additive,waxberry-like Fe_(3)O_(4) secondary nanospheres assembled from ultrafine primary Fe_(3)O_(4) nanoparticles,is synthesized,which exhibits significant destabilization and bidirectional catalyzation towards(de)hydrogenation of LiBH_(4).With an optimized addition of 30 wt.% waxberry-like Fe_(3)O_(4),the system initiated dehydrogenation below 100℃ and released a total of 8.1 wt.%H_(2) to 400℃.After 10 cycles,a capacity retention of 70% was achieved,greatly superior to previously reported oxides-modified *** destabilizing and catalyzing mechanisms of waxberry-like Fe_(3)O_(4) on LiBH_(4) were systematically analyzed by phase and microstructural evolutions during dehydrogenation and hydrogenation cycling as well as density functional theory(DFT)*** present work provides new insights in developing advanced nano-additives with unique structural and multifunctional designs towards LiBH4 hydrogen storage.

关键词： LiBH_(4) Hydrogen storage Waxberry-like Fe_(3)O_(4) Destabilization Catalysis

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Effect of Al_(2)O_(3)on the Mechanical Properties of(B_(4)C+Al_(2)O_(3))/Al Neutron Absorbing Materials

引用

Acta Metallurgica Sinica(English Letters) 2024年第8期37卷 1411-1420页

作者： J.x.Cai B.M.Shi N.Li y.Liu Z.G.Zhang y.N.Zan Q.Z.Wang B.L.xiao Z.y.Ma Shi‑Changxu Innovation Center for Advanced Materials Institute of Metal ResearchChinese Academy of SciencesShenyang 110016China Key Laboratory of Nuclear Materials and Safety Assessment Institute of Metal ResearchChinese Academy of SciencesShenyang 110016China Nuclear Equipment Division Beijing Institute of Nuclear EngineeringChina Nuclear Power Engineering Co.Ltd.Beijing 100840China Department of Materials Science School of Mechanical EngineeringShenyang UniversityShenyang 110044China

B_(4)C/Al composites are widely utilized as neutron absorbing materials for the storage and transportation of spent nuclear *** order to improve the high-temperature mechanical properties of B_(4)C/Al composites,in-situ nano-Al_(2)O_(3)was introduced utilizing oxide on Al powder *** this study,the Al_(2)O_(3)content was adjusted by utilizing spheroid Al powder with varying diameters,thereby investigating the impact of Al_(2)O_(3)content on the tensile properties of(B_(4)C+Al_(2)O_(3))/Al *** was found that the pinning effect of Al_(2)O_(3)on the grain boundaries could hinder the recovery of dislocations and lead to dislocation accumulation at high *** the result,with the increase in Al_(2)O_(3)content and the decrease in grain size,the high-temperature strength of the composites increased *** finest Al powder used in this investigation had a diameter of 1.4μm,whereas the resultant composite exhibited a maximum strength of 251 MPa at room temperature and 133 MPa at 350℃,surpassing that of traditional B_(4)C/Al composites.

关键词： Al matrix composites Neutron absorbing materials (B_(4)C+Al_(2)O_(3))/Al composites High-temperature strength

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Discovery of new MAx-phase-like layered ternary carbide V_(8)P_(6)C:Crystal structure,thermal expansion,and elastic properties

引用

Journal of Materials Science & Technology 2024年第7期174卷 55-62页

作者： H.x.Chen L.Sheng Z.L.Zhang x.C.Wen D.L.yang x.y.ye P.Q.Dai School of Materials Science and Engineering Fujian University of TechnologyFuzhou 350118China Beijing Synchrotron Radiation Facility Institute of High Energy PhysicsChinese Academy of ScienceBeijing 100049China Fujian Provincial Key Laboratory of Advanced Materials Processing and Application Fuzhou 350118China State Key Laboratory of Structural Chemistry Fujian Institute of Research on the Structure of MatterChinese Academy of SciencesFuzhou 350002China

Due to the laminated structure,MAx phases and MAx-phase-like compounds possess outstanding dam-age tolerance capability with good thermal/electrical conductivity and other charming functional prop-erties,showing a bright future for structural-functional ***,a new MAx-phase-like ternary car-bide V_(8)P_(6)C with layered characteristics was *** to the alternate stacking of hexagonal-arranged M/A/x atom layers in MAx phases,V_(8)P_(6)C has a layered structure formed by a repeated stacking of the slabs consisting of V_(6)C-octahedrons and VP 6-distorted-octahedrons in three-atomic layers *** thermal expansion anisotropy was revealed,with the thermal expansion coefficients(TECs)along a-axis,c-axis,and the average value,equal toα_(a)=8.55(5)μK^(−1),α_(c)=10.23(5)μK^(−1),andα_(L)=9.14(5)μK^(−1),*** dilation along the c-axis was mainly dominated by out-plane V-P bonds be-tween layered *** to the pressure-dependent lattice parameters,the polycrystalline bulk modulus(B_(0)=185(9)GPa)and high compressibility anisotropy factor(B_(a)/B_(c)=1.64)was ***-while,the second-order elastic constants were calculated,and the elastic moduli,E=303 GPa,B=198 GPa,G=122 GPa,andν=0.246,were *** the weak connection between layer slabs by out-plane V1-P bond was revealed by the bond stiffness model,with a bond stiffness close to the M-A bond in MAx ***,good damage tolerance capability was predicted according to Paugh’s ratio(G/B=0.616)and Cauchy pressure(P_(a)=0 GPa,P_(c)=-7.5 GPa),even better than those of typical MAx *** discovery of V_(8)P_(6)C provides a new member of MAx-phase-like damage-tolerant ceramic with relatively low density,moderate thermal expansion,and anisotropic compressibility,and the unique lay-ered structure is inspiring for exploring new layered ternary ceramics.

关键词： New ternary carbide MAx phase Thermal expansion Elastic constants Anisotropy

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Fast efficient photon deceleration in plasmas by using two laser pulses at different frequencies

引用

Matter and Radiation at Extremes 2024年第3期9卷 11-18页

作者： y.x.Wang x.L.Zhu S.M.Weng P.Li x.F.Li H.Ai H.R.Pan Z.M.Sheng Key Laboratory for Laser Plasmas(moe) School of Physics and AstronomyShanghai Jiao Tong UniversityShanghai 200240China Collaborative Innovation Center of IFSA Shanghai Jiao Tong UniversityShanghai 200240China Research Center of Laser Fusion of China Academy of Engineering Physics MianyangSichuan 621900China State key Laboratory of High Field Laser Physics Shanghai Institute of Optics and Fine MechanicsChinese Academy of SciencesShanghai 201800China Tsung-dao Lee Institute Shanghai Jiao Tong UniversityShanghai 200240China

The generation of ultrashort high-power light sources in the mid-infrared(mid-IR)to terahertz(THz)range is of interest for applications in a number of fields,from fundamental research to biology and *** conventional laser technology,photon deceleration in plasma wakes provides an alternative approach to the generation of ultrashort mid-IR or THz ***,we present a photon deceleration scheme for the efficient generation of ultrashort mid-IR or THz pulses by using an intense driver laser pulse with a relatively short wavelength and a signal laser pulse with a relatively long *** signal pulse trails the driver pulse with an appropriate time delay such that it sits at the front of the second wake bubble that is driven by the driver *** to its relatively long wavelength,the signal pulse will be subjected to a large gradient of the refractive index in the plasma wake ***,the photon deceleration in the plasma wake becomes faster and more efficient for signal pulses with longer *** greatly enhances the capacity and efficiency of photon deceleration in the generation of ultrashort high-power light sources in the long-wavelength IR and THz spectral ranges.

关键词： laser ultrashort photon

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Cognition on oxidation behavior of Ni-based superalloy GH4742 when exposed to water vapor

引用

Journal of Materials Science & Technology 2024年第7期174卷 15-22页

作者： H.xu S.F.yang E.H.Wang C.y.Guo y.S.Liu x.M.Hou y.L.Zhang State Key Laboratory of Advanced Metallurgy University of Science and Technology BeijingBeijing 100083China Institute for Carbon Neutrality University of Science and Technology BeijingBeijing 100083China

The oxidation behavior of Ni-based superalloy GH4742 exposed to water vapor was investigated at 900-1100℃for 50 h in Ar+20%H_(2)O,with Ar+20%O_(2)included for *** presence of H_(2)O is adverse to formation of continuous Cr_(2)O_(3)oxide layer but contributes to generation of big *** on this,Ni^(2+)and Co^(2+)are more easily to diffuse towards the outermost oxide layer(OOL),forming non-protective Ni-and Co-rich oxides with high *** leads to a higher weight gain in Ar+20%H_(2)O than that in Ar+20%O_(2).At elevated temperatures,the spallation of oxide scale occurs while the consumption of Cr is reduced in Ar+20%H_(2)O,and the contents of Ni-and Co-rich oxides at this moment are reduced in the *** oxidation mechanism was also discussed.

关键词： GH4742 Superalloy H_(2)O Diffusion Oxidation Mechanism

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

In situ TEM investigation of electron irradiation and aging-induced high-density nanoprecipitates in an Mg-10Gd-3y-1Zn-0.5Zr alloy

引用

Journal of Magnesium and Alloys 2024年第5期12卷 1841-1853页

作者： M.Lv H.L.Ge Q.Q.Jin x.H.Shao y.T.Zhou B.Zhang x.L.Ma Shenyang National Laboratory for Materials Science Institute of Metal ResearchChinese Academy of Sciences72 Wenhua RoadShenyang 110016China School of Materials Science and Engineering University of Science and Technology of ChinaShenyang 110016China Materials Science and Engineering Research Center Guangxi University of Science and TechnologyLiuzhou 545006China

In-situ electron irradiation and aging are applied to introduce high-density precipitates in an Mg-10Gd-3y-1Zn-0.5Zr(GWZ1031K,wt.%)alloy to improve the *** results show that the hardness of the Mg alloy after irradiation for 10 h and aging for 9 h at 250℃ is 1.64 GPa,which is approximately 64% higher than that of the samples before being *** is mainly attributed to γ'precipitates on the basal plane after irradiation and the high-density nanoscale β'precipitates on the prismatic plane after aging,which should be closely related to the irradiation-induced homogenous *** latter plays a key role in precipitation *** result paves a way to improve the mechanical properties of metallic materials by tailoring the precipitation through irradiation and aging.

关键词： Mg alloy Electron beam irradiation Hardening Precipitates In-situ TEM

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Microstructure evolution and shape memory behaviors of Ni_(47)Ti_(44)Nb_(9)alloy subjected to multistep thermomechanical loading with different prestrain levels

引用

Journal of Materials Science & Technology 2024年第4期171卷 80-93页

作者： y.H.Zhang H.Li Z.W.yang x.Liu Q.F.Gu State Key Laboratory of Solidification Processing School of Materials Science and EngineeringNorthwestern Polytechnical UniversityXi’an 710072China Shaanxi Key Laboratory of High-Performance Precision Forming Technology and Equipment Northwestern Polytechnical UniversityXi’an 710072China

Ni_(47)Ti_(44)Nb_(9)shape memory alloy(SMA)is a promising material in the aerospace field due to its wide transformation *** application of shape memory effect depends on multistep thermomechan-ical loading,viz.,low-temperature deformation and subsequent heating to ***-temperature deformation prestrain plays a pivotal role in shape memory properties tailoring of SMA ***,microstructure evolution and deformation mechanisms of Ni_(47)Ti_(44)Nb_(9)SMA subjected to vari-ous prestrain levels are still *** this end,microstructure evolution and shape memory behaviors of Ni_(47)Ti_(44)Nb_(9)alloy subjected to multistep thermomechanical loading with prestrain levels of 8%-16%at-28℃(M_(s)+30℃)were *** results demonstrate that the stress-strain curve of the specimen exhibits four distinct stages at a maximal prestrain of 16%.Whereas stageⅡand stageⅢend at prestrains of∼8%and∼12%,*** stageⅡ,the stress-induced martensitic transformation is accompanied by the dislocation slip of the NiTi matrix andβ-Nb *** stageⅢ,in addition to the higher density of dislocations and further growth of stress-induced martensite variants(SIMVs),(001)compound twins are introduced as a result of the(001)deformation twinning in stress-induced ***{20-1}martensite twins are gradually introduced in stageⅣ.Correspondingly,after subsequent unloading and heating,a higher density of{114}austenite twins form in the specimen with a larger prestrain of 16%.With increasing prestrain from 8%to 16%,the recoverable strainε_(re)^(T)upon heating increases first and then ***ε_(re)^(T)obtains a maximum of 7.03%at 10%prestrain and de-creases to 6.17%at 16%*** increase ofε_(re)^(T)can be attributed to the formation of new SIMVs,the further growth of existing SIMVs,and the recoverable(001)compound *** the decrease ofε_(re)^(T)is mainly associated with the irrecoverable strain by{20−1}martensite *** effe

关键词： Ni_(47)Ti_(44)Nb_(9)shape memory alloy Wide transformation hysteresis Thermomechanical loading Microstructure evolution Shape memory behaviors Stress-induced martensitic transformation Deformation twinning

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Four Late-type Galaxies with Double Radio Lobes and Properties of Such Galaxies

引用

Research in Astronomy and Astrophysics 2024年第4期24卷 84-90页

作者： Z.S.yuan x.y.Gao Z.L.Wen J.L.Han National Astronomical Observatories Chinese Academy of SciencesBeijing 100101China CAS Key Laboratory of FAST National Astronomical ObservatoriesChinese Academy of SciencesBeijing 100101China School of Astronomy and Space Sciences University of Chinese Academy of SciencesBeijing 100049China

The triggering mechanism for radio lobes from late-type galaxies is not fully *** samples are desired for a thorough investigation and *** utilizing the optical data from the newly released Dark Energy Spectroscopic Instrument imaging surveys and the radio sources from the NRAO VLA Sky Survey and the Faint Images of the Radio Sky at Twenty-centimeter,we identify four Late-type Galaxies with double Radio Lobes(La GRLs):J0217-3645,J0947+6220,J1412+3723 and J1736+*** previously known La GRLs,we confirm the correlation between radio power P_(1.4GHz)and stellar mass M_(*)of host ***(25/35)La GRLs belong to the blue cloud galaxies,while the newly identified cases in this work are located within the region of the red *** find a clear correlation between the differential radio power,i.e.,the offset from the P_(1.4GHz)-M_(*)relation,and the galaxy color,indicating that bluer galaxies at a fixed M_(*)tend to host more powerful radio ***,the majority(31/36)of La GRLs are either located in a galaxy group or displaying a disturbed *** suggest that all of the galaxy mass,color and surrounding environment could play important roles in triggering radio lobes in late-type galaxies.

关键词： galaxies:active galaxies:jets galaxies:spiral radio continuum:galaxies

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：